Can you help me?I have my code to unlock my samsung but don't know what to do with?My phone ask me for code pin but i don't have *and # so i can't enter the code i have?I need help,please.
Nobody to help me please?
Nobody to explain me how to enter the code i pay?
Please?
Courtesy of http://www.unlocksamsung.co.uk/guides.htm
Model: Samsung i900
1. Insert an unaccepted SIM card
2. Enter the pin code to SIM card
3. At the top of screen a "lock" symbol with the letters NET will appear
4. You will also be presented with the options "OK"; "Dismiss"
5. Press the "OK" option
6. Virtual keyboard appears on screen (the "Enter PIN" prompt may or may not appear).
7. Enter your 8-digit unlock code.
8. Your phone is now unlocked
Click to expand...
Click to collapse
Thank's a lot,i try but my code is wrong i think, it don't work, but thank you very much!!!
Can you try this for me?
go to phone dialer, enter the following: *#7465625#
can you change all entries to Enabled?
**I've an unlocked Omnia so can't try it for you first.**
Ok i do this but if i try again nothing is change, can you explain me what you want me to do?
Surely if you set all options to enabled, it'll enable ALL locks on the phone instead of disabling them?
After setting the "network lock" to disabled, when you enter that service menu again, it just automatically re-enables it again
Where can I find my unlock code
I have been reading the posts about this. I am on the Vodafone Dutch provider and want to unlock the i900 I have. Now, I have no idea where to find it and as you are the expert, can you help me?
craig46 said:
I have been reading the posts about this. I am on the Vodafone Dutch provider and want to unlock the i900 I have. Now, I have no idea where to find it and as you are the expert, can you help me?
Click to expand...
Click to collapse
Just been surfing about..now you will not get you unlock code until the i900 you have from your provider is more than a year old. So, unless you want to pay to have it done (+/- €40 here in NL) you will just have to patient!
omnia sim unlock
no free solution?
for sure there is not..... i can get you the code for 30 euros though in arround one day
www.3grpl.com can help for 15 euro and fast service i have tested
This is for an I907. I imagine that if you are locked to a carrier to you call tech support and do something along these lines and go through the same process.
That is, assuming that you have some sort of account with the company that originally had your phone. I got my off ebay, but it was AT&T locked. Luckily I have an ATT account.
I called ATT support (611) pressed, 1, 5, 5, 0 (or something like that to get to a customer service person and said:
I am going to Hong Kong, a friend purchased a prepaid sim card for me. He said that I needed to call AT&T to ask for a subsidy unlock code to use my card over there.
They checked the imei and account code and then gave me my 8 digit number.
May not apply if you don't have an account with the locking company. Good luck.
There is a solution
http://www.bytetips.com/free-unlock-tricks-for-samsung-omnia-i780-and-i900/
One more solution
http://www.samsung-omnia.org/how-to...omnia-i900-(remove-simlock)/?action=printpage
Try this but not sure
Just enter this code on ur omnia and u have a unlock phone..
*2767*3855# > this is for Hard Reset, not to unlock sim: edited by Admin
I unlocked mine just now... Mine was locked to Orange, UK...
Enjoy
hi ,
first, sorry for my bad english.
i have search here and over the net but i have nothing found.
the problem is:
we have a few Tytn in use in our enterprise.
we are member of a Ad forest.
as we try to connect one Tytn to a exchangeserver it must accept a role
that it must have a password.
it is not the pin for the sim.
the settings for this password are under start-settings-locks.
after the try we would go back to use the Tytn without the password.
but it cannot unlock. you cannot uncheck because it is lightgrey. so i think it it is a gpo. this settings lock the pda after 30 min. and you must enter your password what usually is not needed. That is also happens when you navigate with the pda.
has anybody a solution for this?
thanks for any answers
michael
axisminden said:
hi ,
first, sorry for my bad english.
i have search here and over the net but i have nothing found.
the problem is:
we have a few Tytn in use in our enterprise.
we are member of a Ad forest.
as we try to connect one Tytn to a exchangeserver it must accept a role
that it must have a password.
it is not the pin for the sim.
the settings for this password are under start-settings-locks.
after the try we would go back to use the Tytn without the password.
but it cannot unlock. you cannot uncheck because it is lightgrey. so i think it it is a gpo. this settings lock the pda after 30 min. and you must enter your password what usually is not needed. That is also happens when you navigate with the pda.
has anybody a solution for this?
thanks for any answers
michael
Click to expand...
Click to collapse
Which rom are you using?
Hi,
i use this rom.
Sorata4u_v1.1_WM6.1_Pro_based_on_ANRYL_KITCHEN_19212_GER it works great.
But i believe that this it's not the reasson.
Because we have try to connect to the exchangeserver with 3 Htc Tytn.
All have the same problem. The other 2 have Official Htc Rom WM 6 .
Now, i have found the answer.
Modify the registry key below to disable the Security policy on the device:
Enable/Disable Exchange Security Policy
Registry Key: HKLM\Security\Policies\00001023
To enable it: Set value to 0
To disable it: Set value to 1
everything works fine. After this setting you can uncheck start-settings-locks.
thanks a lot
michael
Great! Works fine to me, and no need restart.
I used that sim unlocker porgram on my Siemens sx66 now it says. Network is locked enter code any ideas.
The sim unlock app?
It must show you a code...
to unlock it...
use your sim chip and type the code
Maybe it's just asking you for a PIN code. If you remove the SIM card does the BA prompt for code again?
I got my unlock code from AT&T, but they told me I must enter a non-ATT SIM to enter the code.
In searching the forum, the CDMA Rhodium apparently has a security menu under Settings-> Personal where you can enter it. That icon doesn't seem to exist on the Tilt 2.
Anyone know where to enter the pin?
You need to insert a non ATT sim card - start up your phone - a screen will pop up asking you to enter the unlock code - after you enter it, hit "ok".
That is all you need do.
Hi, I was wondering if anyone know of a app to automatically enter PIN-Code (SIM-card code) at device startup, but after entering device unlock code?
conclusion:
I want the device and SIM-card to be code locked, but without having to enter both codes.
Hope you understand my question and that someone have a answer for me.
anyone??...
Not sure if I understand or why you want to do that, but you could disable the PIN security on your SIM card and leave the device lock code on, or vice-versa.
You mean something like this?
http://forum.xda-developers.com/showpost.php?p=6220785&postcount=10