Develop Bugs

GPRS with xdaIIs

hello all,
How can i make it so, GPRS stays on all the time?
right now, it connects to GPRS when an internet connection is needed by an application, but diconnects when done.
Can I have it on all the time, even when the xdaIIs is idle?
Didn't have that issue with my previous xdaII.
Thx in advance for your help.
Glad.

um, I'm VERY new to this & really feel that I shouldn't be answering a post for at least another few months, but have you tried changing your preferred wireless data conection channel to "GPRS"?
For me after I do that it just stays on untilI shut it off.

Thanks for the reply,
where is that setting located? can't find it

connect to the gprs munually from the signal icon and it will stay on forever or until you lose signal. If you set the gprs to be your default connection and another app calls it, it will disconnect automatically when done. So your best bet, and this is what I do and I stay connected 7-10 hours at a time is to connect manually and it will stay on.

Hi, resently I'm having problems with the Internet connection. I used to have internet connection practicly all the time but know very often on the day I lose conection and have the soft reset to conect again...
Some of you, can sugest something?

How to activesync by WiFi

Hello,
I can easyly syncronize with USB or Bluetooth.
I've set a WiFi connection to my ADSL router, it works fine, I can scan the LAN (with ScanIP) and see my PC, but no way to sync...
Though Active Sync 3.8 is installed.
Some of you succeeded, what's the magic ? ? ?
Thanks for sharing,
Jean-Jacques

How to guide
Have a look @ this
http://www.wifizard.com/tutorialsXP/sync/index.htm

cchris
Cool link, added to my Favorites, thnks for shareing that with us

Superb
Excellent, if only everything was explained like this, keep it up!!!!

It was already here...
I had actually found it on this forum a few months ago...
But since I had put it into my favourites I figured it would have taken me about the same time to give it you than to tell you "go and and look for it"!
Glad it helped.
Chris

I struggled with this for awhile and could not get it working. The issue was I had was in the PC WINS setting I had left the LMHOSTS Lookup enabled. As soon as I unchecked that and had the Netbios tab checked it synced up. Thanks for the link. Now I can wifi sync.

another gotcha
I read every thread I could find on several forums regarding activesync via wifi and yet I could not get it to work. Then I finally read on a thread that the PPC network card "My network card connects to:"should be set to connect to WORK not The INTERNET. I changed that one setting and bingo, activesync instantly connected via wifi (I already had a partnership created while connected via USB). Of course to have the PPC connect to the Internet via wifi, you have to set it back but that is easy enough to accomplish.
David

Re: another gotcha
dtidmore said:
Then I finally read on a thread that the PPC network card "My network card connects to:"should be set to connect to WORK not The INTERNET. I changed that one setting and bingo, activesync instantly connected via wifi (I already had a partnership created while connected via USB). Of course to have the PPC connect to the Internet via wifi, you have to set it back but that is easy enough to accomplish.
David
Click to expand...
Click to collapse
On my SX66, I don't have to change back to "the Internet" to surf; I just leave it set to "Work".

New problem...activesync connects but
Well, I had everything working, now I have a new issue. I can successfully sync via usb and BT connects. When turn off BT and then tell activesync running on the BA to sync, activesync on both the PC and the BA indicate that they are connected (as BT is off and the BA is out of the cradle, it is obvious that they are connected via WiFi at this point). Then the "looking for changes" meter starts advancing and when it gets about 1/3 of the way finished, it just stops. Both the PC and the BA still show connected and activesync still indicates that it is trying. After several minutes of the no more progress, the PC side activesync indicates that there was a synchronization error.
Any ideas. I have uninstalled activesync 3.8 and reinstalled. I have run the outlook repair utility just in case there was something weird with my outlook pst file (it was clean).
Thanks
David

I have this problem too - I find if i soft reset the unit (and sometimes my computer too) then it works fine. anyone got any ideas?

Tried the soft reset ....
I tried the soft reset on the PPC as well as rebooting the PC and still activesync stops progressing during the sync process about 1/3 of the way thru and eventually reports the synchronization error. I have noted that during BT or usb syncing, the process pauses at the same place for just a split second and then zooms thru the remaining 2/3s of the process. It is like activesync is waiting for somekind of a handshake or acknowledgement from the PPC. I hope someone can shed some light on this.
david

Re: Tried the soft reset ....
dtidmore said:
I tried the soft reset on the PPC as well as rebooting the PC and still activesync stops progressing during the sync process about 1/3 of the way thru
Click to expand...
Click to collapse
Have you tried turning off synchronise 'Files' in the activesync options? sometimes funny files can cause this problem?

Only syncing...
The only things I am trying to sync are my contacts, tasks and calendar. I even tried unchecking even those items so that I was essentially NOT syncing anything but activesync via WiFi still stalls at about 1/3 complete. As I did have WiFi/ActiveSync working for a day or so with NO issues and nothing has changed (or I guess I should say, I changed nothing), this is a real mystery.
David

problems wih wifi?

hi since upgrading my tmobile vario11 hermes 300 to wm6 shacp 3.30 i radio version 1.46 i cant get my wifi connection to work , it will connect to the conection ok , and in connection manager , it will show connected to wifi network , but every time i try and go on internet with phone , it will say there is no internet or data connection avalible? even if it is connected to my wireless connection , any ideas guys ? it is really annoying!

ripplingsnake said:
hi since upgrading my tmobile vario11 hermes 300 to wm6 shacp 3.30 i radio version 1.46 i cant get my wifi connection to work , it will connect to the conection ok , and in connection manager , it will show connected to wifi network , but every time i try and go on internet with phone , it will say there is no internet or data connection avalible? even if it is connected to my wireless connection , any ideas guys ? it is really annoying!
Click to expand...
Click to collapse
I suppose youve tried soft-reset and all that..
does it connect to the internet if you have it connected via usb to the computer?

i havent tried the comp connection no , and yes tried soft reset etc , but if it says it is connected to wifi on phone why is it not using it? i am in UK Btw

ripplingsnake said:
i havent tried the comp connection no , and yes tried soft reset etc , but if it says it is connected to wifi on phone why is it not using it? i am in UK Btw
Click to expand...
Click to collapse
Normally if it is connected to WiFi and if you know the WiFi has a good connection to the internet (i.e. no security, timing, aso.), it should connect. If WiFi does not work, it should try the Wireless connection. If u say that is also setup but still doesnot connect, try to connect it to the computer via USB and see if thats working.
I have used schaps 3.30c until a couple of hours ago and it was working with no issues over wifi and wireless... try hard reset then...
sorry i cant help more...

hey...I have the same problem with my X01HT... I can access to the WiFi in the office and even remote control my PC, but I still cannot visit Internet on the device...pls advise

anyone could kind lent me a hand ?

Does this help?
http://forum.xda-developers.com/showthread.php?t=318748&highlight=proxy

Auto-disconnect UMTS

Hi people!
I've searched the whole board for an application that is able to auto disconnect my umts connection after let's say 2 minutes of inactivity.
I've found this program:
http://www.gb-soft.cz/XDAII/product_gprs_tweak_en.htm
This will change the cachetimer in the registry and seems to work.
But it does only disconnect when the phone is 'on' and inactive.
As soon as I turn my device 'off', the program doesn't disconnect the connection.
I've tried the Kaisertweak program with the 2 minute setting, doesn't work on my trinity.
I need this feature to check mail every 20 mins automatically and then disconnect the connection after checken. It improves the batterylife very much.
How do you guys do this?
Or are you all connected whole day and recharging alot?
Thanks for your suggestions!

fraggar said:
Hi people!
I've searched the whole board for an application that is able to auto disconnect my umts connection after let's say 2 minutes of inactivity.
I've found this program:
http://www.gb-soft.cz/XDAII/product_gprs_tweak_en.htm
This will change the cachetimer in the registry and seems to work.
But it does only disconnect when the phone is 'on' and inactive.
As soon as I turn my device 'off', the program doesn't disconnect the connection.
I've tried the Kaisertweak program with the 2 minute setting, doesn't work on my trinity.
I need this feature to check mail every 20 mins automatically and then disconnect the connection after checken. It improves the batterylife very much.
How do you guys do this?
Or are you all connected whole day and recharging alot?
Thanks for your suggestions!
Click to expand...
Click to collapse
I think this tool is what you need:
http://forum.xda-developers.com/showthread.php?t=317070

cyron_at said:
I think this tool is what you need:
http://forum.xda-developers.com/showthread.php?t=317070
Click to expand...
Click to collapse
Also with this tool, the disconnect timer doesn't work when the device is in my pocket and in the 'off' state. When I turn the device 'on', the connection disconnects after 2 minutes.
Is this just me with the disconnect problem?
Is it maybe this rom? (Bepe 0.79)

Can't update weather programm

hello
i use the achilles_ROM_ver_3_YouTube the acivesync is enable but i can't update my weather programm
can any body help me
tanks

disconnect the cable to close active sync mode and update it over gprs or 3g connection

Tell us a bit more
rachid202446 said:
hello
i use the achilles_ROM_ver_3_YouTube the acivesync is enable but i can't update my weather programm
can any body help me
tanks
Click to expand...
Click to collapse
Hi, I have the same ROM and for me it is not a problem to update the Weather program. Maybe it is comes in handy to explain your method to of connecting (to PC, WiFi)
For me; I update it all through WiFi with success (Weather, email, QuickGPS). I haven't tried it yet with active sync.
Regards

kerni said:
disconnect the cable to close active sync mode and update it over gprs or 3g connection
Click to expand...
Click to collapse
I'm sure he could've guessed that answer. But I doubt thats what he wants, like me he might have a very high fee to connect over GRPS and 3G is not an option as its not a even feature of the P3300.
I also have problems syncing and connecting to the internet via activesync sometimes, the best course of action for me was to disconnect the phone form the PC, kill activesync on the phone and reconnect to the PC, if that doesnt work try a soft reset on the phone and try again.

7 minute solution when active sync not works
jcschrijver said:
Hi, I have the same ROM and for me it is not a problem to update the Weather program. Maybe it is comes in handy to explain your method to of connecting (to PC, WiFi)
For me; I update it all through WiFi with success (Weather, email, QuickGPS). I haven't tried it yet with active sync.
Regards
Click to expand...
Click to collapse
Mostly the problem occurs when connecting to 2 different PC's.
What works for me ( I usually sync with 2 pc's; Work & @Home) when connecting with active sync not succesfull;
- I back up all my information with PIMbackup [1-2 minutes]
- Remove a partnership (or both) on my Artemis (Backup, because removing a partnership deletes appointments, contacts, call logs, tasks, etc.) [< 1 minute]
- Reconnect through active sync and setup a new partnership, in general is the problem-not-be-able-to-sync solved [3-4 minutes]
I hope this will work for you
Regards