Related
hi
tray it
http://forum.xda-developers.com/download.php?id=11271
BL 1.1 JJ
Any advantage to BL 1.0 ?
Cheers
hrb
just my 2 cents on the "updating bootloader issue":
i suggest (for people owning sim-locked universals) not to update bootloader before there is a working method for unlocking them as the sim-lock is closely linked to the bootloader. buzz mentioned he is able to unlock universals having bootloader <1.00 installed (not by an easy automatic and comfortable procedure, still manually but possible). but you never know what is included in an updated bootloader and what maybe prevents your device from getting unlocked successfully.
i personally collect and keep those new bootloaders on my harddisk but i do not update the device and stay with mine (unfortunately v1.00) until the "brick" is unlocked.
regards
peter
ps: if you never plan to unlock your device by a great software tool from any of our developers here, just don't care about my writing ;-)
I think the devise is faster now and more stabel than befor
alisultan said:
I think the devise is faster now and more stabel than befor
Click to expand...
Click to collapse
Do you mean the the startup process (e.g. softreset) ?
I can't imagine, that the BL is active during normal operation.
But maybe I am wrong.
Cheers
hrb
I have some questions before I upgrade...
Will it recover my Jasjar to come out of coma (flash screen)?
Do I lose my warranty?
Is there any way to downgrade to v0.6?
THanks for your help guys :wink:
hrb said:
alisultan said:
I think the devise is faster now and more stabel than befor
Click to expand...
Click to collapse
Do you mean the the startup process (e.g. softreset) ?
I can't imagine, that the BL is active during normal operation.
But maybe I am wrong.
Cheers
hrb
Click to expand...
Click to collapse
yes it's faster after softrest and i notice that the operating system is more stable now
shaytaan said:
I have some questions before I upgrade...
Will it recover my Jasjar to come out of coma (flash screen)?
Do I lose my warranty?
Is there any way to downgrade to v0.6?
THanks for your help guys :wink:
Click to expand...
Click to collapse
for the firest question you have to try but firest remove the sd card, fore the warranty i don't think so,downgrade to v0.6 i didn't try if you have it ubload it hear and i will try
Does upgrading the Bootloader need a hard reset ??I mean do I have to reinstall everything after I update the bootloader?
Also I have previously downloaded somewhere her the following file: BL10_RUU_UNI_V11.exe is that Version 1.0 or 1.1
this file here is jasjar_bl1.01_ruu_v1.2.exe which is that 1.01.or.version 1.2
I am a bit confused as you see, Any help will be appreciated
No hard-reset needed!
To be honest, I came from 0.6 and see no difference in speed, booting up of whatever.
alfamini said:
No hard-reset needed!
To be honest, I came from 0.6 and see no difference in speed, booting up of whatever.
Click to expand...
Click to collapse
Same for me
Cheers
hrb
After I upgraded my jasjar with the new 1.1 bootloader my jasjar boots in 3 seconds!!!!---------plus 20 lol There is no speed difference. But the new boot loader seems that there may be a hint of a major os update in the future. Going from .6 to 1.1 is just insane.
Mike
problems upgraging rom after installing bl 1.01
hi all,ive just installed bl 1.01 and now cant seem to install any other roms apart from o2?.before i had 1.00 and could use any rom with maupdate etc.now that doesnt work,it says its flashed it but hasnt?has anyone else had the same problem with the new bootloader,i cant even dowgrade the damn bootloader back to 1.00.bugger cause i wanted to try the imate rom.any ideas?
Downgrade BL
How to downgrade from v1.01?
thanx
Problem. I was use this new bootloader, but before finish a see the Connection error. But now i my universal deat. I cant enter into bootloader, i cant do hardreset... only if I hold the two softkeys and use softreset, then see the displej with "press 0 to MR or X to continue". But 0 and X now has no effect.
Please help, thanks for any solutions !
jerrry said:
Problem. I was use this new bootloader, but before finish a see the Connection error. But now i my universal deat. I cant enter into bootloader, i cant do hardreset... only if I hold the two softkeys and use softreset, then see the displej with "press 0 to MR or X to continue". But 0 and X now has no effect.
Please help, thanks for any solutions !
Click to expand...
Click to collapse
Please read this http://forum.xda-developers.com/showthread.php?t=259003
You get one of the problem posted there!
ufff
thank you. Flashed and works...
How ?
How to flashed bootloader ?
Thanks !!
I got my Qtek 9000 back from repair (stuck in splash screen) and I now find version 2.01 of the bootloader on the machine. This then seems to be the latest.
I bought my new JasJar a week ago and it has Bootloader V2.01 on it just as an FYI =0)
Hi guys.
I have a strange problem.Yesterday i have bought me online a SFR v1640-
a white and very beautifull version of the QTEK 9000.Works perfektly as a
PDA(Wi-fi,navigation,MP3,video and reader)but doesn't seem to recognize any SIM card!When i make a soft reset it shows No GSM v.1.13.65 FRE!
What got wrong?
White? Sounds cool.
Did you buy it new? Someone could've installed a bad Radio ROM that could cause those problems.
I'd suggest upgrading to the latest ROM available from your operator, then if you still have problems it's probably a hardware fault.
...........
And the even Stranger thing is that i cannot enter the telefone menu of the
WM5!The thing is not locked but seems to really doesn't have a GSM module!
SFR Radio update?
Because i have no access to the FTP for unknown reason can someone send me the file for Radio ROM update for a french SFR v1640 on my [email protected]
radotomov said:
Because i have no access to the FTP for unknown reason can someone send me the file for Radio ROM update for a french SFR v1640 on my [email protected]
Click to expand...
Click to collapse
Well, Radio ROMs should work for any country, I would recommend trying your operator's recommended ROM (including CE, ExtROM and RADIO) to see if things work.
Game over
Well i've done it!Now the damned device snows the bootloader screen and doesn't work!i've tried softreset,coldboot and hardreset but all
i receive is the sad words Serial and v1.00 on the screen!
This means you stuck in bootloader.
Read this
http://wiki.xda-developers.com/inde...ose stuck on Boot Screen (UNI_exitbootloader)
and this
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
radotomov said:
Well i've done it!Now the damned device snows the bootloader screen and doesn't work!i've tried softreset,coldboot and hardreset but all
i receive is the sad words Serial and v1.00 on the screen!
Click to expand...
Click to collapse
Yeah, that happens a lot, do not worry though, check out the links above and try the suggestions to get it working.
It will work again, don't worry!
............
The battery was not working well!Tomorrow i wil get a new battery and try it!
radotomov said:
The battery was not working well!Tomorrow i wil get a new battery and try it!
Click to expand...
Click to collapse
Good luck!
Hi,
I tryed to upgrade to WM6 but I think I tit someting wrong, I flasht my
old WM5 back but now it is not possible to try flashing to WM6.
stuck in new 3.03.0000 bootloader.
I hope somebody can help me, thanks
Theo
are you stuck in bootloader, or were you successful in flashing WM5 ROM? also, please please PLEASE read the threads in this forum before posting. You are the millionth customer to post this issue
Come on guy, if you can write, i suppose that you can read HERE ...
racerx_ said:
are you stuck in bootloader, or were you successful in flashing WM5 ROM? also, please please PLEASE read the threads in this forum before posting. You are the millionth customer to post this issue
Click to expand...
Click to collapse
I was success full in flashing the WM5 rom back on the device, now I am trying to install hard SPL and WM6 as describe on TRINITYGUIDES.INFO but stuck by the start.
Hard SPL will not flash I see on my Red,Green,Blue screen IPL-SSPL, SPL-1.07.ds , yes I am new with this matter an my English is not too well but please.
please state what the problem is when you try to flash
racerx_ said:
please state what the problem is when you try to flash
Click to expand...
Click to collapse
When I start to flash the sync. is oke but when the bootloader screen appears the flashing stops and the PDA is not connected anymore.
Try to launch again your update while you're in bootloader mode...It should work !!
shym said:
Try to launch again your update while you're in bootloader mode...It should work !!
Click to expand...
Click to collapse
I just did it but when my device is in bootloader mode there is now
connection with my notebook (VISTA) anymore. When I restart my
PDA the connection is established.
there is a wiki guide to flashing under vista..
please note, that when you start the updater, and your device goes in to bootloader, it times out. So connection is lost. Simply start the update again, with device still connected in bootloader
racerx_ said:
there is a wiki guide to flashing under vista..
please note, that when you start the updater, and your device goes in to bootloader, it times out. So connection is lost. Simply start the update again, with device still connected in bootloader
Click to expand...
Click to collapse
Yes I did already as you describe the result is still no connection (error).
hmm... i think you're gonna have to use Pof's splxploit to load hard-spl and then flash another ROM from there.
It's a question of whether SPL 3.03 is exploitable in the same way...
theovdb said:
I was success full in flashing the WM5 rom back on the device, now I am trying to install hard SPL and WM6 as describe on TRINITYGUIDES.INFO but stuck by the start.
Hard SPL will not flash I see on my Red,Green,Blue screen IPL-SSPL, SPL-1.07.ds , yes I am new with this matter an my English is not too well but please.
Click to expand...
Click to collapse
you need to use the active sync after you load wm5 ... that's the trick..
Hello,
I have allways start the update twice, Once where the device starts in this 3-Colors boot screen and a second time to start the Flashing process.
Do not tuch the device Just clos update application on Windows PC and restart it and go through the question process until it starts to flash
Hope it helps for you
Robidog
banzro said:
Hello,
I have allways start the update twice, Once where the device starts in this 3-Colors boot screen and a second time to start the Flashing process.
Do not tuch the device Just clos update application on Windows PC and restart it and go through the question process until it starts to flash
Hope it helps for you
Robidog
Click to expand...
Click to collapse
Thanks guys for all your help but the problem still exists, I keep looking
to this forum and hope in time the problem will be solved.
Thanks a lot
theovdb said:
Thanks guys for all your help but the problem still exists, I keep looking
to this forum and hope in time the problem will be solved.
Thanks a lot
Click to expand...
Click to collapse
Hello,
Explain me the Problem a bit more cloaser (step by step what you are doing)
error messages, and also what image you had bevore on it, I need also to know which which version is written on the 3-colored screen...
Look forward to her from you...
stepw said:
It's a question of whether SPL 3.03 is exploitable in the same way...
Click to expand...
Click to collapse
the answer is yes, splxploit works in new bootloader too.
racerx_ said:
the answer is yes, splxploit works in new bootloader too.
Click to expand...
Click to collapse
the answer is no splxploit not works on SPL 3.03 on my device
So what did you do to fix this ??
shym said:
So what did you do to fix this ??
Click to expand...
Click to collapse
On this moment nothing, I did something wrong by flashing the first time
and now I am stuck in SPL 3.03. I think the best what I can do is waiting for
the official rom from HTC.
Hi Friends,
i used mirage to upload image to my samsung shg-i780, but now its bricked and stuck in the setup up touch screen mode.
i now realise that i have put a CDMA image on a GSM phone.
Can anyone help with a different image for GSM phone?
rom
you should definiitelly give a try try Inertia`s 96dpi 6.1 pre final rom.
prithwish said:
Hi Friends,
i used mirage to upload image to my samsung shg-i780, but now its bricked and stuck in the setup up touch screen mode.
i now realise that i have put a CDMA image on a GSM phone.
Can anyone help with a different image for GSM phone?
Click to expand...
Click to collapse
u can re flash it... go to bootloader.. mine got stuck on the bootloader once and its flying now...
try diffrent roms.. its not dead... if you need more help please msg me..
truffle1234 said:
u can re flash it... go to bootloader.. mine got stuck on the bootloader once and its flying now...
try diffrent roms.. its not dead... if you need more help please msg me..
Click to expand...
Click to collapse
hello ... i flash my phone, he got stuck at 13% , after that the phone is stuck at loading windows page, i tried anothers roms but nothing, pls can u help me ? i think i need a official rom or something like that... pls help me
Hello everyone,
I tried installing Root on my radio - after finishing with the device, it rebooted. Now it is stuck at booting logo lollipop.
I can not access recovery mode, the manufacturer sent me the OEM software but it did not work.
I've tried booting to recovery and resetting everything.. Didn't work.
Please, please help.
thanks in advance...
marcelocwb said:
Hello everyone,
I tried installing Root on my radio - after finishing with the device, it rebooted. Now it is stuck at booting logo lollipop.
I can not access recovery mode, the manufacturer sent me the OEM software but it did not work.
I've tried booting to recovery and resetting everything.. Didn't work.
Please, please help.
thanks in advance...
Click to expand...
Click to collapse
Wich toaster do you have ?
Plz. tell us your Radio Model....
Best regards
I bought it from ebay,
Unbranded from China.
marcelocwb said:
I bought it from ebay,
Unbranded from China.
Click to expand...
Click to collapse
Wich model my friend?
There are 10.000 different units
Share a link, or a photo or something else.
Nobody can help you, when we dont know what unit do you have.
PLZ think about that, its logical
Radio model
Hi there,
I can not post the link, the forum does not allow, this a the item number on ebay
282130181595
I found something to brand as a "autoestero"
Thanks
EagleSoldier said:
Wich model my friend?
There are 10.000 different units
Share a link, or a photo or something else.
Nobody can help you, when we dont know what unit do you have.
PLZ think about that, its logical
Click to expand...
Click to collapse
Hi there,
I got some pictures
Hello everyone, Please someone could help me with this problem, I know it has a solution but I'm new to this area, for helping me.
Thanks
you need to go under settings /about machine and there should be a number like: MTCC-KLD_vs-2.89 for example. That will let everyone know the device you have
Thanks,
I havelock