Develop Bugs

stuck in new 3.03.0000 bootloader

Hi,
I tryed to upgrade to WM6 but I think I tit someting wrong, I flasht my
old WM5 back but now it is not possible to try flashing to WM6.
stuck in new 3.03.0000 bootloader.
I hope somebody can help me, thanks
Theo

are you stuck in bootloader, or were you successful in flashing WM5 ROM? also, please please PLEASE read the threads in this forum before posting. You are the millionth customer to post this issue

Come on guy, if you can write, i suppose that you can read HERE ...

racerx_ said:
are you stuck in bootloader, or were you successful in flashing WM5 ROM? also, please please PLEASE read the threads in this forum before posting. You are the millionth customer to post this issue
Click to expand...
Click to collapse
I was success full in flashing the WM5 rom back on the device, now I am trying to install hard SPL and WM6 as describe on TRINITYGUIDES.INFO but stuck by the start.
Hard SPL will not flash I see on my Red,Green,Blue screen IPL-SSPL, SPL-1.07.ds , yes I am new with this matter an my English is not too well but please.

please state what the problem is when you try to flash

racerx_ said:
please state what the problem is when you try to flash
Click to expand...
Click to collapse
When I start to flash the sync. is oke but when the bootloader screen appears the flashing stops and the PDA is not connected anymore.

Try to launch again your update while you're in bootloader mode...It should work !!

shym said:
Try to launch again your update while you're in bootloader mode...It should work !!
Click to expand...
Click to collapse
I just did it but when my device is in bootloader mode there is now
connection with my notebook (VISTA) anymore. When I restart my
PDA the connection is established.

there is a wiki guide to flashing under vista..
please note, that when you start the updater, and your device goes in to bootloader, it times out. So connection is lost. Simply start the update again, with device still connected in bootloader

racerx_ said:
there is a wiki guide to flashing under vista..
please note, that when you start the updater, and your device goes in to bootloader, it times out. So connection is lost. Simply start the update again, with device still connected in bootloader
Click to expand...
Click to collapse
Yes I did already as you describe the result is still no connection (error).

hmm... i think you're gonna have to use Pof's splxploit to load hard-spl and then flash another ROM from there.

It's a question of whether SPL 3.03 is exploitable in the same way...

theovdb said:
I was success full in flashing the WM5 rom back on the device, now I am trying to install hard SPL and WM6 as describe on TRINITYGUIDES.INFO but stuck by the start.
Hard SPL will not flash I see on my Red,Green,Blue screen IPL-SSPL, SPL-1.07.ds , yes I am new with this matter an my English is not too well but please.
Click to expand...
Click to collapse
you need to use the active sync after you load wm5 ... that's the trick..

Hello,
I have allways start the update twice, Once where the device starts in this 3-Colors boot screen and a second time to start the Flashing process.
Do not tuch the device Just clos update application on Windows PC and restart it and go through the question process until it starts to flash
Hope it helps for you
Robidog

banzro said:
Hello,
I have allways start the update twice, Once where the device starts in this 3-Colors boot screen and a second time to start the Flashing process.
Do not tuch the device Just clos update application on Windows PC and restart it and go through the question process until it starts to flash
Hope it helps for you
Robidog
Click to expand...
Click to collapse
Thanks guys for all your help but the problem still exists, I keep looking
to this forum and hope in time the problem will be solved.
Thanks a lot

theovdb said:
Thanks guys for all your help but the problem still exists, I keep looking
to this forum and hope in time the problem will be solved.
Thanks a lot
Click to expand...
Click to collapse
Hello,
Explain me the Problem a bit more cloaser (step by step what you are doing)
error messages, and also what image you had bevore on it, I need also to know which which version is written on the 3-colored screen...
Look forward to her from you...

stepw said:
It's a question of whether SPL 3.03 is exploitable in the same way...
Click to expand...
Click to collapse
the answer is yes, splxploit works in new bootloader too.

racerx_ said:
the answer is yes, splxploit works in new bootloader too.
Click to expand...
Click to collapse
the answer is no splxploit not works on SPL 3.03 on my device

So what did you do to fix this ??

shym said:
So what did you do to fix this ??
Click to expand...
Click to collapse
On this moment nothing, I did something wrong by flashing the first time
and now I am stuck in SPL 3.03. I think the best what I can do is waiting for
the official rom from HTC.

NO GSM problem! any solution?

Hi All,
I am facing the dreaded 'No GSM' error and unable to flash radio rom problem.
tried to flash every possible rom including original O2 one. All failed on radio ram flash.
Went through various threads and there seems to be no solution yet for universal (though there seems to be a solution for Hermes).
So all, please help me if there is some light in the end of this tunnel
regards
Topgun

i have tried all the possible things but no luck so far.....
please help

I just bought a used XDA with this same problem. Thought if i flash it it would work... any suggestions on what I can do? i havent touched it yet. Thanks

has ANYONE been able to solve this problem?!!!! Pls what did u do step by step.... I spent so much money on this %&%$& Phone!!! pulllleeeessssss

I haven't had this problem, however it sounds like you phone may be SIM locked? If so, you will need to flash it with the native ROM from it;'s origin. If it is SIM and CID locked, it will only take the OEM signed ROM.
Quote from POF (Moderator)
"Not in 100% of the cases... there are some situations where the radio bootloader is intact, but the radio is screwed, this causes all bootloader commands that require radio seclevel to be queried to hang the device (like 'task 32' or 'info 2'), thus not being able to flash it with the usual RUUs.
If this happens, it can easily be fixed with hermflasher by flashing the raw radio without prior authenticating to bootloader."
If this is of any help. It is from a thread on CID Unlocking RUU for Uni

Thanks.
i have been through that thread.
well the question on that is 'Is hermflasher okay to flash Universal as well'?

Where is this thread? i can try it.... but cant find the thread on cid unlocking ruu for universal in mermes section....
raskell said:
I haven't had this problem, however it sounds like you phone may be SIM locked? If so, you will need to flash it with the native ROM from it;'s origin. If it is SIM and CID locked, it will only take the OEM signed ROM.
Quote from POF (Moderator)
"Not in 100% of the cases... there are some situations where the radio bootloader is intact, but the radio is screwed, this causes all bootloader commands that require radio seclevel to be queried to hang the device (like 'task 32' or 'info 2'), thus not being able to flash it with the usual RUUs.
If this happens, it can easily be fixed with hermflasher by flashing the raw radio without prior authenticating to bootloader."
If this is of any help. It is from a thread on CID Unlocking RUU for Uni
Click to expand...
Click to collapse

Here is the thread
http://forum.xda-developers.com/showthread.php?t=301662&highlight=radio+error
Let me know if you have any luck with this.
cheers

topgunarindam said:
http://forum.xda-developers.com/showthread.php?t=301662&highlight=radio+error
Let me know if you have any luck with this.
cheers
Click to expand...
Click to collapse
no, hermflasher wont work with universal (I dont think) ill consult with some others and report back here our consensus on what to try

I am facing the same 'No GSM' error in xda exec, plz can somebody tell me step by step how to solve it.

Thanks Midget
shall wait for your word.

Midget
topgunarindam said:
shall wait for your word.
Click to expand...
Click to collapse
I'm waiting too.

Good News at Last
atleast it worked for me.
flashed using a different pc with radio 1.18 and it worked.
the radio is working fine with laurentius26's WM6 rom.
atleast my brick comes live again.

LUCKY YOU!!!!!!!!
topgunarindam said:
atleast it worked for me.
flashed using a different pc with radio 1.18 and it worked.
the radio is working fine with laurentius26's WM6 rom.
atleast my brick comes live again.
Click to expand...
Click to collapse
lucky you, I tried that same WM6 ROM (with radio 1.18) and still same problem. I've tried falshing with 2 different desktops and a laptop. Still same problem! Topgun, did u have active sinc installed ? was the PC u used fresh? (no apps installed). do u think if i format my PC it could flash the radio? DID u flash radio only? or the whole laurentious v3 WM6 package (that is at the same time)?
Pls reply

Tbaba said:
lucky you, I tried that same WM6 ROM (with radio 1.18) and still same problem. I've tried falshing with 2 different desktops and a laptop. Still same problem! Topgun, did u have active sinc installed ? was the PC u used fresh? (no apps installed). do u think if i format my PC it could flash the radio? DID u flash radio only? or the whole laurentious v3 WM6 package (that is at the same time)?
Pls reply
Click to expand...
Click to collapse
Him
well it was a laptop dell to be precise.
it was never used for window mobile usage previously and hence fresh Active sync 4.5 was installed.
only radio rom 1st (using the RUU check bypassing)......
once succesful, then laurentiius rom was tried.
one more thing i had entered bootloader manually after disabling AS 4.5
i used the original USB cable as well
hope this helps....
suggest get hold of some friends "win mobile virgin" pc/laptop.
P.S>- i am not sure but this prob might be somewhat related to COM ports available on your machine.

My HERM Is Running Without Radio (GSM)?!

PLZ help me, while trying to upgrade my HERM I lost the Radio, there is a message (No GSM) appearing during the boot.
I've tried many unofficial ROMs, but still getting the same message!!!
And when I tried to use the official ROM, the upgrade stopped on 11%!!??
To solve the hangup problem, I used unofficial ROM again, and after the upgrade I found the same GSM problem again.

FirasKB said:
PLZ help me, while trying to upgrade my HERM I lost the Radio, there is a message (No GSM) appearing during the boot.
I've tried many unofficial ROMs, but still getting the same message!!!
And when I tried to use the official ROM, the upgrade stopped on 11%!!??
To solve the hangup problem, I used unofficial ROM again, and after the upgrade I found the same GSM problem again.
Click to expand...
Click to collapse
What "official" ROM? You've given absolutely NO info regarding anything friend...
Myself, I'd click the green link in my signature... but that's me

My problem is clear, there is No GSM in my HERM, I've tried WM 5, WM 6 and WM 6.1, but no way, I couldn't success??!!
Kindly, advice if you have any solution or ask for a specific info.

FirasKB said:
My problem is clear, there is No GSM in my HERM, I've tried WM 5, WM 6 and WM 6.1, but no way, I couldn't success??!!
Kindly, advice if you have any solution or ask for a specific info.
Click to expand...
Click to collapse
Yes your problem is clear, you have no GSM. I don't know where you hail from, which exact PDA you have, your provider, what ROM you last used before this happened, etc..

Dr Puttingham said:
Yes your problem is clear, you have no GSM. I don't know where you hail from, which exact PDA you have, your provider, what ROM you last used before this happened, etc..
Click to expand...
Click to collapse
Fine,,,
Device: at&t 8525
ROM: Original WM5 ROM, and while trying to upgrade it my device hanged up on the colored screen. To fix that, I've installed schap's 4.31 WM6 ROM using the MicroSD Card (HERMIMG). Now the device can boot but with No GSM at all (even there's no information about the GSM under Device Info).
The device now can accept any modified ROM (like schap's, faria, etc...) but unable to accept the official (original) ROMs. When I try to install any official ROM the upgrade process will stack on 11% every time.
So, the device still having no GSM.
Thank You....

FirasKB,
Most roms on her DO NOT come with a radio included. Usually only the manufacturer roms do.
There are 2 things you need to do:
- Consult the MrVanx guides which will help you understand what you are doing (google search for this).
- go to the wiki in this forum and search for a radio rom to upload.
In summary, reflash, say, Scahps rom then flash a radio rom from the wiki (I suggest radio 1.47, which is pretty reliable).
Hope this helps.
WB

FirasKB said:
Fine,,,
Device: at&t 8525
ROM: Original WM5 ROM, and while trying to upgrade it my device hanged up on the colored screen. To fix that, I've installed schap's 4.31 WM6 ROM using the MicroSD Card (HERMIMG). Now the device can boot but with No GSM at all (even there's no information about the GSM under Device Info).
The device now can accept any modified ROM (like schap's, faria, etc...) but unable to accept the official (original) ROMs. When I try to install any official ROM the upgrade process will stack on 11% every time.
So, the device still having no GSM.
Thank You....
Click to expand...
Click to collapse
Ahhh, a little info.
First download the official AT&T 3.62 ROM which includes the 1.54.07.00 radio.
Reboot the pc with the PDA disconnected.
(Oh, make sure that you have ActiveSync 4.5 insttalled of course)
Put the device into bootloader mode (hold power and OK button while pressing reset with stylus, nice tri color screen will appear)
Connect the PDA to the USB cable and run the RUU_Inside.exe file.
wacky.banana is correct, most chef's don't include a radio. You've got a corrupted ROM (due to the incomplete flash) The RUU_Inside.exe will typically talk directly to the hardware when nothing else can and fix. I've personally recovered around 10 or so 8525's that I've "bricked" with bad flashes and then repaired with this method.
I can't guarantee that this will work but it IS your best shot friend.
Good luck!

Dr Puttingham said:
Ahhh, a little info.
First download the official AT&T 3.62 ROM which includes the 1.54.07.00 radio.
Reboot the pc with the PDA disconnected.
(Oh, make sure that you have ActiveSync 4.5 insttalled of course)
Put the device into bootloader mode (hold power and OK button while pressing reset with stylus, nice tri color screen will appear)
Connect the PDA to the USB cable and run the RUU_Inside.exe file.
wacky.banana is correct, most chef's don't include a radio. You've got a corrupted ROM (due to the incomplete flash) The RUU_Inside.exe will typically talk directly to the hardware when nothing else can and fix. I've personally recovered around 10 or so 8525's that I've "bricked" with bad flashes and then repaired with this method.
I can't guarantee that this will work but it IS your best shot friend.
Good luck!
Click to expand...
Click to collapse
Thanks to your support friends,,
I've done as you mentioned, but the upgrade process stopped on 11% again and couldn't complete!!?? (the message ERROR [262]: UPDATE ERROR appeared on my P.C)!!??
Kindly, advice...

I can't remeber what error 262 is about; however is your device unlocked? If it is not then you need to address that issue first (its in the wiki)
Secondly have you installed hard spl to your device BEFORE attempting to upgrade your rom? If the answer to this question is no then that will confirm that you have not read up on this before jumping in, which is hugely dangerous.
WB

Stuck.... completely stuck
My fiances phone is stuck in the tri color bootloader screen. I am in the US and i have tried everything from flashing the original RUU to a hard reset and everthing, but nothing seems to work. the IPL is 4. 10. 0002 and the SPL is 4. 10. 0000. Can someone please help me. I know there has to be a way to fix this.

I had the same problem. After trying to fix it myself for about a week I gave up and sent it to AT&T Repair center. Got it back functional.
I haven't tried the Himalaya ROM method, though.
Check this thread:
http://forum.xda-developers.com/showthread.php?t=372895
Good luck!

wacky.banana said:
I can't remeber what error 262 is about; however is your device unlocked? If it is not then you need to address that issue first (its in the wiki)
Secondly have you installed hard spl to your device BEFORE attempting to upgrade your rom? If the answer to this question is no then that will confirm that you have not read up on this before jumping in, which is hugely dangerous.
WB
Click to expand...
Click to collapse
Thanks again to your support,
The problem happened when I tried to unlock the device to upgrade it (it was fine befor), I don't know whether it was already locked or not, but usualy when I buy any Pocket P.C I'm preparing to unlock it first (I've done that many times on HERMES before, but this is the first time I'm facing such problem!!). So, while unlocking the device it's stucked on the tri color screen.
I've done many things after that to solve the problem (updating the hard SPL to v2.10 successfully, flashing many ROMs -not including Radio- successfully).
So, I can flash any ROM now but it must be without Radio, otherwise the flashing process will stuck on 11%.

try reading the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick

More than 2 days and I couldn't success to bring the Radio back??!! I think I've really lost my device.

FirasKB,
What steps exactly have you taken to solve the problem? Try and outline them here; that will help people on here to identify what else you need to do to bring the device back to life.
WB

FirasKB said:
More than 2 days and I couldn't success to bring the Radio back??!! I think I've really lost my device.
Click to expand...
Click to collapse
Schap´s Rom has NO Radio. Flash this one BUT u must have HardSPL
http://forum.xda-developers.com/showthread.php?t=348435&highlight=Radio

wacky.banana said:
FirasKB,
What steps exactly have you taken to solve the problem? Try and outline them here; that will help people on here to identify what else you need to do to bring the device back to life.
WB
Click to expand...
Click to collapse
wacky.banana,
As I wrote above, my problem still not solved and my device still running with (No GSM).
I've done the following:
- Updating the ROM (O.S only as the device not accepting any Radio ROM)
- Updating the SPL to Version 7.
- Trying to update the radio (separately) but I didn't success??!!
It seems there is no solution to fix this problem???!!!

Abo Forat said:
Schap´s Rom has NO Radio. Flash this one BUT u must have HardSPL
http://forum.xda-developers.com/showthread.php?t=348435&highlight=Radio
Click to expand...
Click to collapse
No way, I tried it but my device can't accept any Radio version.

FirasKB said:
wacky.banana,
As I wrote above, my problem still not solved and my device still running with (No GSM).
I've done the following:
- Updating the ROM (O.S only as the device not accepting any Radio ROM)
- Updating the SPL to Version 7.
- Trying to update the radio (separately) but I didn't success??!!
It seems there is no solution to fix this problem???!!!
Click to expand...
Click to collapse
Frisk,
Read this thread and try the solutions metioned in it. It tells you what error 262 is all about....http://forum.xda-developers.com/archive/index.php/t-298516.html
Cheers
WB

wacky.banana said:
Frisk,
Read this thread and try the solutions metioned in it. It tells you what error 262 is all about....http://forum.xda-developers.com/archive/index.php/t-298516.html
Cheers
WB
Click to expand...
Click to collapse
Unfortunately, but that's also didn't help, because the main problem now is how to install the Radio on the device??!!
The device is not accepting the Radio installation at all, NO WAY....

help to upgrade..

hi,
im a 1 day user of htc universal,hehe!actually i just only bought it yesterday and i want to upgrade it to wm6.1 since its only wm5.i already red some forum about unlocking but im not quite sure if i really understand about unlocking thats why i want to ask help for the universal's expert,hehe!what should i first supposed to do before upgrading wm6.1 rom,is it similar to htc wizard regarding unlocking coz i had it before,please help me coz im excited to use this gadget,hehehe!

cyleandrei07 said:
hi,
im a 1 day user of htc universal,hehe!actually i just only bought it yesterday and i want to upgrade it to wm6.1 since its only wm5.i already red some forum about unlocking but im not quite sure if i really understand about unlocking thats why i want to ask help for the universal's expert,hehe!what should i first supposed to do before upgrading wm6.1 rom,is it similar to htc wizard regarding unlocking coz i had it before,please help me coz im excited to use this gadget,hehehe!
Click to expand...
Click to collapse
Welcome to the forum
Please READ here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
And remember to use SEARCH button before posting
Good luck,

orb3000 said:
Welcome to the forum
Please READ here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
And remember to use SEARCH button before posting
Good luck,
Click to expand...
Click to collapse
i red this link already my friend but im not sure that i really understand the procedure in upgrading thats why im asking for the help of anybody who knows universal because it also iunclude in the link the procedure in upgrading wizard its very confusing for me.
thanks to your reply!

I have to agree with Andrei here, the doc is not very enlightening,
from what I have read there are a few things missing.
For example I don't know if I have to "unlock" my phone. I bought it on ebay they said it was unlocked, the phone was not available in USA&Canada they imported it somehow from Europe (it's an MDA Pro). I beleive it is unlocked already but ...some users here say "completly unlock your phone" ...which means...there are some other partial "unlocks" ???
The Wiki procedure says you have to backup your files...It is har to beleive that there is no standard reliable software that can be included and mentioned in this procedure. This is an important step and if anything goes wrong you must be able to find your way back to at least what you had had before you did the upgrade.
As for "the search button" ...I have tried that and ...)) the same results tons of answers ...you need years to read and to process all that info.

Guys,
After Having Device only for few days to upgrade may not be advisable. Therefore I suggest you to take few days to get to know your device and read more info.
REgarding the "Locked Device" means you would only able to use the device with the SIM of the Orginal carrier. As you already using the device in other country and other service provider..I guess you device is UNLOCKED.
Anyhow I will try to short describe how to upgrade goes.
1) Make sure you get the orginal OS of your device first. anything goes wrong you can flash back to that OS.
2) make sure you backup your personal files from the device( files;PIM;etc.etc)
3) make sure you have bootloader higher then V1.0
4) make sure you have full charged Battery
5) Remember that in cooked WM6 the vidoe call doesnt function anymore!!!
6) Download a cooked ROM available here in the Universal forum. ( the New ROM of Tomal V8.5 is great one)
7) I.E Tomals ROM file has got everything you need to Flash your device
8) Anything else is clearly descriebed in the WIKI "READ IT carefully"
Good Luck.. dont blame if anything goes wrong

Bulldog said:
Anyhow I will try to short describe how to upgrade goes.
1) Make sure you get the orginal OS of your device first. anything goes wrong you can flash back to that OS.
Click to expand...
Click to collapse
Couldn't find any decent procedure to backup my ROM. Could you please point me to one of them ?
I am running Windows Vista x64.
2) make sure you backup your personal files from the device( files;PIM;etc.etc)
Click to expand...
Click to collapse
This is done. Used a "trial copy of a program recommended here.Not sure I will be able to restore because of the trial limitations...Suggestions ?
3) make sure you have bootloader higher then V1.0
Click to expand...
Click to collapse
I have exactly 1.0. Can I upgrade this by just runing JASJAR_BL1.01_RUU_v1.2.exe ???I have an MDA Pro.
4) make sure you have full charged Battery
Click to expand...
Click to collapse
N.P.
5) Remember that in cooked WM6 the vidoe call doesnt function anymore!!!
Click to expand...
Click to collapse
Don't need it, it'sw OK for me
6) Download a cooked ROM available here in the Universal forum. ( the New ROM of Tomal V8.5 is great one)
Click to expand...
Click to collapse
I believe I will try this one.
7) I.E Tomals ROM file has got everything you need to Flash your device
Click to expand...
Click to collapse
i hope so
8) Anything else is clearly descriebed in the WIKI "READ IT carefully"
Click to expand...
Click to collapse
Aparently if your PDA is seen by UNI_ExitBootloader.exe that means the reboot command is executed then you should be OK. But....I tried that and I had to try it twice, the first time didn't work.
So...apparently I will have to try to bootloder upgrade and after that burn the new ROM.
I still need a way to save the old one.
BTW, in what circumstances can yu damage your phone up to the point where you can not reflash it or use it anymore ?
nad one more question, will the phone work (calling and receiving calls) if the software is gone ? I believe it will not but...what do I know ? )

I'm also not totally clear on the instruction. Though they seem to be complete the style their written in leaves some questions.
If I have a G4 then is the file "HTC_Uni_SIM_Unlock_v1.rar" at ftp://ftp.xda-developers.com/Universal/Tools_and_Programs/ is what is needed to unlock CID/EROM locks in preparation for ROM flashing?
Or is SIM unlocking totally different from the unlocking were talking about?
Thank you vary much!

1000QA said:
Couldn't find any decent procedure to backup my ROM. Could you please point me to one of them ?
I am running Windows Vista x64.
This is done. Used a "trial copy of a program recommended here.Not sure I will be able to restore because of the trial limitations...Suggestions ?
I have exactly 1.0. Can I upgrade this by just runing JASJAR_BL1.01_RUU_v1.2.exe ???I have an MDA Pro.
N.P.
Don't need it, it'sw OK for me
I believe I will try this one.
i hope so
Aparently if your PDA is seen by UNI_ExitBootloader.exe that means the reboot command is executed then you should be OK. But....I tried that and I had to try it twice, the first time didn't work.
So...apparently I will have to try to bootloder upgrade and after that burn the new ROM.
I still need a way to save the old one.
BTW, in what circumstances can yu damage your phone up to the point where you can not reflash it or use it anymore ?
nad one more question, will the phone work (calling and receiving calls) if the software is gone ? I believe it will not but...what do I know ? )
Click to expand...
Click to collapse
1)I have no Vista therefore I cnt give you much info and that but I have read alot of issues with it. Therefore I suggest you to read more on how to upgrade in Vista.
2) I personally dont use any Backup Software. I syc. My Device with my desktop and M$ Outlook. Any Info that I have with contacts,Appointments,Task even My Documents folder and files. Those will be available on my Desktop and after upgrade you can Sync. them to you Device with new ROM
3) If you have BL 1.0 which means you should have G3 device then I believe you can use the JASJAR_BL1.01_RUU_v1.2.exe ???I have an MDA Pro.
4) UPGRADE in XP....YOU NEED TO CHECK HOW IS IT IN VISTA
4.1) Download Tomals ROM which comes in package like:TML_v85_WM61_20764_ST.exe (that is the standard OS).
4.2) Put your device in boot loader mode with button Comb. >power B + Back light B + Push the reset B <with stylus until you see on the screen the Boot loader Screen. Connect Device to your Computer.
4.3) Start the TML_v85_WM61_20764_ST.exe with double click and the installation will start.
4.4) follow the screen instruction.
4.5) After completing the upgrade Disconnect the Device from the Computer.
4.6) Push button comb. >push left soft key B + push right soft B + Push with stylus the reset B< untill you see message on the screen ....Push "0 (nill)" to set device to factory setting or something..
Well then you should be fine and completed your upgrade. AGAIN CHECK THE UPGRADE WITH VISTA.. I have no experience with Vista.

Bulldog said:
1)I have no Vista therefore I cnt give you much info and that but I have read alot of issues with it. Therefore I suggest you to read more on how to upgrade in Vista.
2) I personally dont use any Backup Software. I syc. My Device with my desktop and M$ Outlook. Any Info that I have with contacts,Appointments,Task even My Documents folder and files. Those will be available on my Desktop and after upgrade you can Sync. them to you Device with new ROM
3) If you have BL 1.0 which means you should have G3 device then I believe you can use the JASJAR_BL1.01_RUU_v1.2.exe ???I have an MDA Pro.
4) UPGRADE in XP....YOU NEED TO CHECK HOW IS IT IN VISTA
4.1) Download Tomals ROM which comes in package like:TML_v85_WM61_20764_ST.exe (that is the standard OS).
4.2) Put your device in boot loader mode with button Comb. >power B + Back light B + Push the reset B <with stylus until you see on the screen the Boot loader Screen. Connect Device to your Computer.
4.3) Start the TML_v85_WM61_20764_ST.exe with double click and the installation will start.
4.4) follow the screen instruction.
4.5) After completing the upgrade Disconnect the Device from the Computer.
4.6) Push button comb. >push left soft key B + push right soft B + Push with stylus the reset B< untill you see message on the screen ....Push "0 (nill)" to set device to factory setting or something..
Well then you should be fine and completed your upgrade. AGAIN CHECK THE UPGRADE WITH VISTA.. I have no experience with Vista.
Click to expand...
Click to collapse
That is exactly what I did.
I am happy now excepting that I don't know if I need to instal RealVGA or that is included. I belive it is not.
I will try tomorrow.
Thanks

1000QA said:
That is exactly what I did.
I am happy now excepting that I don't know if I need to instal RealVGA or that is included. I belive it is not.
I will try tomorrow.
Thanks
Click to expand...
Click to collapse
The realVGA is not included in the Tomals ROM. you need to download it separately.(http://forum.xda-developers.com/showthread.php?t=327830)
I am not that young anymore and therefore I found my self having issues with the RealVGA. 128DPI is nice but you need good eyes. 96DPI is not usable I would say

Trophy Stock ROM PLEASE HELP!

I need find stock ROM for my HTC 7 Trophy.
I asked at may places but noone helped me
I have:
OS Version:7.0.7392
FW Version:2250.21.12200.162
HW Version:0003
Radio FW Version:5.69.09.05a_22.50.50.21U
Radio HW Version:A.102.0.D4
Bootloader version:5.0.2250.1(130781)
And i need some ROM with SPL max 1.22...
Its realy important!!! Please
Thanks

i need it too for my trophy, mobilkom A1 austria

tomasino.blaha said:
I need find stock ROM for my HTC 7 Trophy.
I asked at may places but noone helped me
I have:
OS Version:7.0.7392
FW Version:2250.21.12200.162
HW Version:0003
Radio FW Version:5.69.09.05a_22.50.50.21U
Radio HW Version:A.102.0.D4
Bootloader version:5.0.2250.1(130781)
And i need some ROM with SPL max 1.22...
Its realy important!!! Please
Thanks
Click to expand...
Click to collapse
I'm guessing you have a Vodafone DE HTC 7 Trophy, for your stock ROM look here: http://forum.xda-developers.com/showthread.php?t=924333
LAZMUSTI said:
i need it too for my trophy, mobilkom A1 austria
Click to expand...
Click to collapse
Haven't seen a stock Mobilkom A1 Austria ROM flying around, maybe try posting your question in the above linked thread. Ansar had a lot of branded stock ROMs, maybe he has your ROM lying around somewhere.

Yes i know about it,but i tried many ROMs for Trophy but s still get ERROR 226
"Flash write error"..where is the problem?

I would love to have a Verizon Trophy rom...and the 2 ones that are there are bad...

tomasino.blaha said:
Yes i know about it,but i tried many ROMs for Trophy but s still get ERROR 226
"Flash write error"..where is the problem?
Click to expand...
Click to collapse
i have exactly the same problem !!!
i cant downgrade to original rom!
any help ?

tomasino.blaha said:
Yes i know about it,but i tried many ROMs for Trophy but s still get ERROR 226
"Flash write error"..where is the problem?
Click to expand...
Click to collapse
I have same branded phone Vodafone DE and I haven't any problem with flash original ROM. Do you have backup on Zune, if you updated your phone via zune?
Sent from my 7 Trophy T8686 using XDA Windows Phone 7 App

Yes,i have backup of NoDo,but i dont need NoDo but i need lower SPL..
I tried 3 ROMs but i still get error like "flash write error"...

tomasino.blaha said:
Yes,i have backup of NoDo,but i dont need NoDo but i need lower SPL..
I tried 3 ROMs but i still get error like "flash write error"...
Click to expand...
Click to collapse
thats right i thing the problem is the boot loader.

tomasino.blaha said:
Yes,i have backup of NoDo,but i dont need NoDo but i need lower SPL..
I tried 3 ROMs but i still get error like "flash write error"...
Click to expand...
Click to collapse
May be you have to restore your backup of NoDo. Then you can flash another stock ROM.

dtbinh said:
May be you have to restore your backup of NoDo. Then you can flash another stock ROM.
Click to expand...
Click to collapse
After i update to mango , i return to nodo and now i am stuck because i cant go back to 7008 to unlock the phone.
i think we got the same problem.
Is there a way to downgrade bootloader without brick the phone?

after i tryed to take updates in 4 pc's i manage to go to mango again , and now i am going to try to go to 7008 .
I thing that in previous updates - restore something wend wrong and the phone stack to nodo.

tomasino is your trophy from vodafone germany?

Yes i bought it in Germany...

still nothing ?

I this any help?
http://forum.xda-developers.com/showthread.php?t=853975