Hello!
I own a HTC Universal and I just upgraded ROM to the T-Mobile's new one.
The problem is my Universal had a problem on the USB connector (felt down the Universal) and I have to go to assistance for warranty.
The thing is I can't go there with other ROM than Qtek (mine is Qtek 9000).
I can't upgrade ROM with a cable!
So I have a question! Is there a way to upgrade ROM with Bluetooth or putting the ROM's file on SD and execute it from there.????
Best regards,
Deiota
What version of Active Sync have you installed? I had some problems with upgrading the rom to, but when I installed Active Sync 4.2 beta it worked fine.
I guess you missunderstood.
Physically I can't attach the USB from PC to PPC.
I don't have where to put it into!
Related
I have my USB not working since few days. Tried all possible solutions shown in the various posts but no result.
One way mentioned in one forum is to upgrade the ROM to solve the probem. But question is how to upgrade when USB is not working????
Please help!!!!!!!!!!!!!!!
Not sure about Universal, but some may be able to upgrade via the SD card.
Can some body help me to upgrade my universal through SD card
I assume that it must be possible to use some form of wireless connection to update the files? The reason i say this is because of the message that you get when downloading the ROM update from tmobile site says something about downloading and running from PC and not direct to ppc? Does activesync work via a bluetooth connection? If so then i guess you could try running the update through that.
Hi, i have a T-Mobile MDA Compact III (UK), as original, and want to change it from WM5 to WM6, i have been reading through the forums, and havent heard anything from people being able to change it without a PC connection. I can charge off USB, but activesync doesnt find it (tried with known working cables, and different PCs). I have come to the conclusion that when i charge it in the car, its got broken (as mentioned on one of the threads).
So, is it possible to CID unlock/change the ROM from the Mico SD card?
Cheers,
I had the same problem, just bring it backk to T-mobile, they will fix it
You can update copying the new rom on the sd card and doing an hard reset. There is a thread about this.
ok, cheers guys i think i'll go pay t-mobile a visit so i can hack my phone lol
You can flash only 'official' new system by SD. I've tried to flash other .mbh (and USPL too) but it impossible ;((((
i can't find HTC service center in Moscow that can help me ;(
when official WM6 for HTC P3300 will out ???
alexhirurg said:
You can flash only 'official' new system by SD. I've tried to flash other .mbh (and USPL too) but it impossible ;((((
i can't find HTC service center in Moscow that can help me ;(
when official WM6 for HTC P3300 will out ???
Click to expand...
Click to collapse
The official WM6 is out already
http://forum.xda-developers.com/showthread.php?t=333803
I hope that the link on that thread still works.
Enjoy!
Hi guys I am sorry if I am posting this in the wrong forum or if this has already been asked elsewhere.
My universal was running great all my apps on wm5 lovely I even just bought copilot for it and that worked great also! I then found the HTC home feature that displays on your today screen I installed this on wm5 and it worked but not very well so I decided to flash my universal with the wm6 rom customized to run on my system with 64mb ram. I think the biggest mistake I made was trying to do this under windows vista as the pc crashed leaving my Universal saying Serial (or USB if connected to pc) and displaying v2.0.1 at bottom. I have tried to recover the device using the methods on the wiki but the device is recognised by the pc as a mobile pocket PC and is refusing to allow me to update the driver so I cannot install the usb modem driver for vista! I am going to my brothers this evening and will try to recover again on an XP system I hope it work I have only had my universal for 4 days! I had aq smilar experience with my SPC C600 when I first got that - I love fidling thats my problem!!! - One last thing to point out is that I do not know it thte device if fully unlocked, I presume as it has gone to the stage of stuck on bootloader it must be?!? Any positive words of encouragement welcome!
Regards
Gene
Anyone! lol I know this was only posted an hour ago - I guess I am stuck in bootlader is that correct?
Hi Guys I have managed to ressurect my universal it was stuck in bootloader! I am going to attepmt to reflash my device with a win moble 6 rom, are there any recommendations for the Universal mine was shipped as the 02 Xda Exec, I appreciate you will probably tell me that I just to try one and see if it works but I would rather use a rom which has been tested as working as stable, I have downloaded the wm6 rom which was "adaptedK for a universal equipped with only 64mb of ram Has anyone used this rom? I also need to totally unlock this device to ensure a happy upgrade, But the link on here for the tool (in the wiki also) seem to be dead I hope one of you can point me in the right direction The main reason I want to upgrade to WM6 is so I can use the HTC home plugin. I know this is available for WM5 but it does not display correctly on my device it appears squashed up?? If I can correct this under WM5 then I see no need to upgrade to WM6?
Many Thanks for your help
Gene.
just use uni_exitbootloader.exe
2klik on your pc just try
NVM: I got it the guys over at ppcgeeks got me through..flashed and cooked..
--------------------------------------------------------------------------------
First, yes, I have just joined but have been following this forum for some time. I went to the htc site upgraded my rom and radio to the newest Sprint rom. Now I want to get the Diamond Dette Rom.
Here's where the problem starts: I connect to activesynce..try to run the vogue unlocker 2.31..goes fine until it says disconnect and reconnect device..by that time my vogue is in bootloader and says USB, but no connection to activesync..so of course I can't continue, and can't establish a connection..
1. tried vogue unlocker 0.41
2. tried to flash when starting in bootloader
3. changed usb ports
4. can boot into WM 6.1
HELP what am I doing wrong..I'm not a newbie to ppc's and I'm stuck..makes me feel newbie-ish
tf2d said:
NVM: I got it the guys over at ppcgeeks got me through..flashed and cooked..
--------------------------------------------------------------------------------
First, yes, I have just joined but have been following this forum for some time. I went to the htc site upgraded my rom and radio to the newest Sprint rom. Now I want to get the Diamond Dette Rom.
Here's where the problem starts: I connect to activesynce..try to run the vogue unlocker 2.31..goes fine until it says disconnect and reconnect device..by that time my vogue is in bootloader and says USB, but no connection to activesync..so of course I can't continue, and can't establish a connection..
1. tried vogue unlocker 0.41
2. tried to flash when starting in bootloader
3. changed usb ports
4. can boot into WM 6.1
HELP what am I doing wrong..I'm not a newbie to ppc's and I'm stuck..makes me feel newbie-ish
Click to expand...
Click to collapse
wow fam, hate to say it but it sounds like its a wrap...just bricked my SprinTouch also...in a different way...asurion sent me another one tho...im not gonna risk bricking another one...
not bricked
i dont think you guys bricked your phone. you should try reflashing via micro sd. if you have your phone unlocked( you can check by going into bootloader to see if you do) just put the .nbh file(rom) in the root of your storage card put back into bootloader and youir phone will ask if you want to upgrade the os. also you need to change th rom file from something.nbh to voguimg.nbh. thats real important. i do it useing total commander.
but i think you guys should try that. its the only way i flash now.faster.
tf2d said:
NVM: I got it the guys over at ppcgeeks got me through..flashed and cooked..
--------------------------------------------------------------------------------
First, yes, I have just joined but have been following this forum for some time. I went to the htc site upgraded my rom and radio to the newest Sprint rom. Now I want to get the Diamond Dette Rom.
Here's where the problem starts: I connect to activesynce..try to run the vogue unlocker 2.31..goes fine until it says disconnect and reconnect device..by that time my vogue is in bootloader and says USB, but no connection to activesync..so of course I can't continue, and can't establish a connection..
1. tried vogue unlocker 0.41
2. tried to flash when starting in bootloader
3. changed usb ports
4. can boot into WM 6.1
HELP what am I doing wrong..I'm not a newbie to ppc's and I'm stuck..makes me feel newbie-ish
Click to expand...
Click to collapse
You dont need an active sync connection to run rom updates. if you ran the unlocker 2.31 and it gets stuck just do a hard reset and see if it says imcoke on the screen. If so then you succesfully unlocked the phone and can run the custom rom you want. Even if it doesnt connect via active sync. The RUU only finds a usb connection. it doesnt use active sync.
hi everyone!
I got one Tytn where the USB port don't work at all, it's broken totally.
Is it possible to flash his ROM without connecting to PC? How?
I do the research but I didn't found anything.
please help
thanks in advance
actually, I found similar topic for HTC Diamond. Does anyone know is it the same with HTC Tytn? How to upgrade ROM only from Internal Storage?
I don't think that there's a method to flash from internal storage but you can flash a new rom using an SD card.
That method is explained in the wiki right here. I use it all the time because I use linux and I'm too lazy to dual boot to windows just to flash a rom.
Out of curiosity, if the usb port is broken, how do you recharge the device?
well, I have mine Tytn that I use for charging and I have 3 batteries: old one, new and one from that broken Tytn
thanks for replying, that's exactly what I needed.