Error when unlocking-wrong device :S - JASJAR, XDA Exec, MDA Pro Software Upgrading

Hello, i was using buzz's sim unlocking tool for the universal on my spv m5000 but when i run MaUpgradeUt_noID i get an error that says something like this was not desgined for your device
what am i doing wrong? i followed the instructions!

any suggestions?

Related

I got this "ERROR 100: MODEL ID ERROR",... pl help

I got this "ERROR 100: MODEL ID ERROR",... pl help
I try to upgrade XDA2 rom from "ruu172104wwe_t-mobile-uk" to "XDAII_172181_Final" and I got this error "ERROR 100: MODEL ID ERROR"
How can I slove this problem?
First I have O2 rom and I upgraded to "ruu172104wwe_t-mobile-uk", when I try to upgrade to "XDAII_172181_Final" everything look fine till the error occur I can open my O2 anymore on the screen show just message "serial v1.03"
Please help,.. Thank
i'm assuming you have a wallaby?
try reflashing using sd method.
dl nb1 file from kitchen
use xda-rools to write nb1 to sd
insert sd into wallaby
press pwr button and reset at same time
good luck!
Thank you for suggestion, but I'm very new for O2.. and I use XDA2
Could pl explain more,... how can i get nb1 (where is kitchen) and what's xda-rools? does it will work with XDA2?
sorry to ask boring question but i really dont know.
you are using O2 XDA2 ,right! do a "cleanjumper" , if you want update , under you use a t-mobile rom, the easy way!!

How do I unlock the SPV M500 (magician)? Help needed plz..

Hi,
My spv m500 (orange) is currently locked. How do I unlock it?
I've tried the universal unlocker from this site but it didn't work.
Maybe I need a magician to unlock the magician
Any suggestions please?
Kind Regards
this tool
rename from text to exe file. Copy to device and execute it
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
thanx mate very good solution tested my self
REGARDS
GSM MIND
Thanks
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
I've tried it. And it works! Thanks a lot!!!
Thnx Mate !
Thnx alot
I appreciate it !!!!!
WBR.,
ALi
unlock m500
Thanks for the great site - I have unlocked an M500 bu when I place my O2 sim into m500 it accepts the pin but then posts 'network is locked - enter unlock code' - despite using unlock program previously - any ideas?
simon
Hello, i´m trying this tool, bud i get this Invalid or missing SIM card
any clues, I´m from Bolivia, South America.
Thanks a lot
i cant get this thing to work :S
help? spv m500 with missing or invalid sim error (its on orange, and i want it on t-mobile, and had it working a while ago, and then suddenly it didnt)
thanks -- ben
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
awesome man it works
thanx bro
Having lost my M3100................
the removing the sim card and restarting resolved the problem, kept trying like the other posts said.
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
Thank you!
SPV Unlocking
hi guys, im a novice at this unlocking thing and i have followed the instructions to unlock th spv but trying to figure out where to put the unlock.exe file on the device to unlock it, pls help
I just got me a free M500 off a friend who no longer uses it so I am going to try this unlocker later today
I'll post back with what I did and if it worked or not
the tool at the start of this thread unlocked the SPV m500 in 1 minute
no problems at all
I placed a copy of the file in MY DOCUMENTS on the phone and used FILE EXPLORER to run it.
Now I need to work out why i can't see any of the contacts on the SIM card
Magician
I have a magician which was sim locked to T-Mobile.
Thanks to the tools offered, I was able to un-lock the phone and use it on O2 for 3 years.
I had a problem with the phone and had to re-install the ROM from the CD supplied by T-mobile. Upon doing so, the phone has locked itself to T-Mobile again and will not accept any other sim cards. I have tried O2, Vodafone and Orange.
The phone itself has now got Windows 6.1 by Cotulla, but as mentioned above, I can only use it on T-Mobile.
I have tried:
Lokiwiz (error message)
xdadev_all_unlock says the following:
xdadev_all_unlock started
device=HTC Magician
xdadev_all_unlock started
device=HTC Magician
xdadev_all_unlock started
device=HTC Magician
could not find security key for device type HTC Magician
xdadev_all_unlock failed
xdaSimlock
xda2unlock-v2.2 (says "found all locks to be already unlocked!"
The device still won't allow me to use any other sim cards. T-Mobile will supply a code for £29.00 but it's not guaranteed to work.
I will be very grateful to anyone out there that can help please??
Kind Regards,
Jp

error message

Hi, I ran the MaUpgradeUt_noID program and got an "error 120" instead of the 114. Everything else ran as described in the instructions. However I have a locked SIM and the code supplied does not work.
Any suggestions? The phone is a T-Mobile MDA Vario II.
Please help!!!!

HTC 8525 cingular / TYTN stuck in bootloader

I have a Cingular 8525 that got stuck in bootloader !
the SPL version is 1.04
I have tried everything that is described on this forum. Including using the mitty.exe to unbrick the phone. I put the ROM files into a memory card and tried to flash from there and now i got a message on the phone saying "checking" and it is stuck there!
any idea how i can overcome this?
thanks,
Joe.
use mtty tool here.read wiki.after u know how to use mtty, type "set 14 0" without inverted commas and press enter.u shd b through the bootloader.
I tried that already with the mitty.exe. no luck!

Problem upgrading with Dopod D810, have i done the wrong steps?

Hi all thanks for looking at my thread.
I'm try to upgrade my Dopod D810 and i encounted a problem and would really like some help here.
The steps i thought i should take were the following
Run...
Unlock and CID Unlock
HardSPL
Radio
ROM
However, after running the Unlock and CID Unlock, i tried to run HardSPL.
But i come accross the "ERROR [246] DEVICE NOT RESPONDING" when i run the ROm update utility.
On the PDA with the 3 color screen
TRIN100
IPL-SSPL by Des
TIN100
SPL - 1.07.ds
and in the white "USB"
what have i done wrong? should i have no ran the UNLOCK and CID Unlock? if so how do i revert this? and what are the correct steps to take to upgrade this?
I am a hermes user and i've done exactly what i did to my hermes to his one.
Please help me.
Kind Regards,
Jason
---------------------------------
guys please, i tired reading the wiki and it told me to run SSPL-TRIN on my device.
i ran it, tired running the utilites again and i get the same problem.
the wiki and text documents says that as long as my SPL ends in a ".ds" i should be able to flash any rom without a problem but i still cant.
all i want is to have a english ROM and the current radio
please help masters. i keep getting "ERROR [246] DEVICE NOT RESPONDING" when i try to flash LVSW lastest rom.
kind regards,
jason
----------
I have been able to upgrade the radio to 1.41.
but i still get ERROR 246 when i try to upgrade the ROM or HardSPL
I'm waiting for help and will be very greatful when someone responds.
Kindest regards,
Jason
have you tried to run the RUU again (leaving the device connected in bootloader, tri colour screen) after you get the error?
Same problem here...
Alternative flashing method.
I just can tell I success using MiniSD with TRINIMG.nbh and execute SSPL-TRIN.exe to flash it. Hope this help. Read Wiki for details.
EDIT
ok i understand that you are suggesting that i use my SD card to Flash the ROM in.
If this is successful i will be greatful but will i have to do this everytime from now on rather than through the computer?
jason
racerx_ said:
have you tried to run the RUU again (leaving the device connected in bootloader, tri colour screen) after you get the error?
Click to expand...
Click to collapse
Ok so i've tried to flash a ROM/HardSPL using the SD card.
i;ve rename the file to TRINIMG.nbh
and then i;ve loaded it in to the bootloader.
however i get a quick flash of a grey background with the word "Loading" and then it just goes to the tri color screen and nothing happens.
the Tricolor screen shows
TRIN100
IPL-0.50
TRIN100
SPL-1.20.Olipro
(white area) Serial(or USB)
Please someone help me out.
a member has mentioned that it is because i do not have Super CID and i should run the unlock. but i have done so.
please guru's of trinity! help me!!!
Personally, I've never been able to flash my phone from the SD card. Never tried before Hard-SPL, but certainly since it just does not work. Need a Windows XP machine (my vista 64 bit won't work - can't find the 64 bit driver for USB bootloader mode). Find yourself a windows pc!
nealed said:
Personally, I've never been able to flash my phone from the SD card. Never tried before Hard-SPL, but certainly since it just does not work. Need a Windows XP machine (my vista 64 bit won't work - can't find the 64 bit driver for USB bootloader mode). Find yourself a windows pc!
Click to expand...
Click to collapse
My attempts with the SD have not work, when i put the SD card in and put it in to boot loader, i get a quick flash of Loading and its just stuck on the tricolor displaying
TRIN100
IPL-0.50 (could this be the problem?)
TRIN100
SPL - 1.20.Olipro
(white area) serial
i do have a windows XP home machine.
man this is stressing me out. please guru's help me out
ok i dont know how but i've some how been able to upgrade to the lastest LVSW. there is a god (i've always known)
how i did this was i was trying to run HardSPL again. It went in to the bootmode while the Utitlty on the computer gave ERROR 246.
So i thought i'd run LVSW, and what do you know? it work! and upgraded!
the question i have is
when i load the bootloader screen i get
TRIN100
IPL - 0.50
TRIN100
SPL - 1.20. Olipro
but then ERROR 246 occurs
i get
TRIN100
IPL-SSPL by Des
TIN100
SPL - 1.07.ds
So does anyone know what is wrong with my Trinty?
What do you bootloaders show?
---------------------------------
edit.
i;ve also noticed that after successful being able to upgrade to LVSW when i look at device info.
my radio hasnt actually upgraded, but back when i wasnt able to upgrade the rom it said i had 1.41.
but now i only have radio 1.16. but i have been able to upgrade to radio 1.41. now.
I just use TRIN-SSPL.exe and make it go into SuperCID Bootloader mode. Then it ask me to confirm whether I want to flash it, press [Power] to continue and it work.
MJRL said:
Same problem here...
Click to expand...
Click to collapse
are you using xp or vista? If you have vista try that on a windows xp machine. I have seen that many time on my p3600.
Just my 2 cents
First time with vista, but after read so many problems with vista i've tried with xp, but gave same error has jasonchiu, i'll try has he did,ignoring the error
Is it possible that other files on the MiniSD?
Try format the memory card and write the files.
I am running Vista so this the only way for me,
I used this method to flash WM5 and WM6.
On the memory card, only
TRIN-SSPL.exe and TRINIMG.nbh
and the device is not SuperCID.

Categories

Resources