xda iis doesn't sync???? - MDA III, XDA III, PDA2k, 9090 General

i have xda iis but i can't be sync at toshiba tecra s2 with win xp prof sp 2.i use activesync 4.1.anybody any idea????

...try to disable all firewalls on Your notebook....

already do that but not solve my problem but if i use infra red it can be synscronized.this description of my xda IIs
rom : 1.40.00 wwe
rom date: 03/10/2005
radio:1.12.00
ext rom:1.40.923
could somebody help me?

Possible the Cable connector is broken or the Connection on the Phone has been damaged too.
Try a different cable. if it doesnt stil Sync, then possible the phone connection house is busted.

i have same problem too!!! but i get message that usb device not recognized!!!! past week i have problem with cable, when i move it it start to work but now nothnig the bigger problem is that there is no store in serbia where i can but it

Related

my pda2k can't connect to pc pls help

suddenly my pda2k stopped connecting to my pc , i was using activesync 4, i don't know what is wrong , i tried reparing active sync ,i even reinstalled active sync 4 then 3.7 but no hope any idea?
take in consideration that pda2k is charging well so cradel is ok
rom v 1.31.00 wwe
rom date 12\13\04
radio v 1.10.00
protocol v 1337.391
extrom v 1.31.112 wwe
thx for help
My XDA 2s also sometimes stops connecting, though it always charges on the cradle. I use Activesync 3.8. Is the version 4 any improvement? One good thing is -- unlike the old HP PPC I had, this phone charges on the cradle without a power connection -- through the USB hub.

XDA Orbit disconnects W Lan!

I have an XDA Orbit and each time I sync it with my Sony Vaio S4XP it disconnects the W Lan which will not reconnect until I reboot the laptop. Anyone else had this problem as its now getting a bit monotonous
I've had this problem b4 and found the answer on these forums. The sames now happening again after flashing Meschle's new O2 Prem v2 Rom. I've tried a few different searches but now cab't see it.
I remeber I had to download something, I've tried reinstalling Active sync 4.5 but no good.
Its like connecting the orbit removes the wireless stuff on my laptop.
Ta in advance

Can I use a Holux GPSlim236 data cable with my Orange SPV M5000

I have just got an Orange SPV M5000 but it didn't come with a data cable. Can I use the one from my Holux GPSlim 236 Satnav unit, or the one from my Canon 400D
Sure you can.
Tried it but it didn't seem to work.It didn't charge or connect to the PC.
Does anyone know of a good place to get a data cable from.
Also, do I need to install any software onto my PC to use this PDA (apart from Activesync 4.2 which is already on with windows XP)
the 400d cable works fine iam using it worked with update etc fine even charges it
I found out what the problem was. Activesync was using the new protacol not the seral USB that it should have. Once I installed the MS cab to allow changing over, it worked fine.

Blue Angel Sync!!

Recently i bought a blue angel which later i found out that it had sync problems connecting to the pc. Anyone out there can help or got the service manual for this phone? Greatly appreciate for your time. Other things working fine, wifi, bluetooth, gprs.
specifically... what do you mean about "sync problems"? MS active sync? cable sync?
can you elaborate on that? so that we can isolate the problems...
okie, i m having problem with the pda i think, when i plug it in, it will say usb device not recognized. when my frenz used his pda(exactly same) it doesnt have sync problems. so anyone out there can help out? i think i need the service manual to change the sync port. my pda can charging though .. just cant sync. really fed up with it.
FeiJi said:
okie, i m having problem with the pda i think, when i plug it in, it will say usb device not recognized. when my frenz used his pda(exactly same) it doesnt have sync problems. so anyone out there can help out? i think i need the service manual to change the sync port. my pda can charging though .. just cant sync. really fed up with it.
Click to expand...
Click to collapse
Are you using the same cable between the two phones? I had mine do this as well, turned out to be a bad cable.
Is this being done on WM 2003, 5 or 6? If it's not 2003, who made the ROM?
As for changing the sync port, there isn't much to change on the phone side beyond enabling RNDIS and using the serial connection or bluetooth.
Also, what OS is this on?
Need to be specific.
and if the cable's fine...
check your BA PC I/O connector(where you plug your cable) on the unit itself, it might be the one causing the problem.
my BA has a little bit of chipping on the thin PCB holder for the connectors, so the copperwires are sticking out. and im praying to god that the rest of the holder "hold" itself.
i m using the original rom wm2003se, which if my phone cant sync, means i cant upgrade. that's the most fed up part. i send to the phone technician n they say need to take days for checking up da problems. i m using win xp on my pc. the cable was the same of coz.
Any idea of flashing without synchrosing?

fujitsu loox n520 problem

got the unit without the cradle , and usb cable, i managed to make a usb cable from a lg connector and it work well.
the problems : igo8 does not find the internal gps module and i cannot connect to wi-fi networks, i find thye networks but cannot connect.
i try to update to wm6 or reflash wm5 but the pc installer won't work without external power. the phone charges trough usb , but the application ask's for wall adapter plugged in. I tried to trick the phone by making him see a charger using the connector circuit found on pinouts.ru bun doesn't doo the trick .
does someone have a cradle internal schematic , or there is a workaround on updating the pda ? thank's in advance
please help me
nobody has any ideea on how to workaround that protection ? so i could instal wm 6 without the wall charger ?

Categories

Resources