Hi to all. I have a problem on My Qtek 9000 Vodafone. After upgrade my device is Died! I have not the boot Loader. Black Screen! Help Me please.
cyberbob72 said:
Hi to all. I have a problem on My Qtek 9000 Vodafone. After upgrade my device is Died! I have not the boot Loader. Black Screen! Help Me please.
Click to expand...
Click to collapse
did you try to install a previous version? Something like that happen to me, with a jasjar upgrading with TM and I solved reinstalling again the last official rom from clubimate.
beginner said:
cyberbob72 said:
Hi to all. I have a problem on My Qtek 9000 Vodafone. After upgrade my device is Died! I have not the boot Loader. Black Screen! Help Me please.
Click to expand...
Click to collapse
did you try to install a previous version? Something like that happen to me, with a jasjar upgrading with TM and I solved reinstalling again the last official rom from clubimate.
Click to expand...
Click to collapse
all that is happened because I have tried to make a upgrade previously.
Yes! But pda is not recognized. When i to connect on USB Port, the peripheral disowned (Periferica Sconosiuta). and Upgrade Utility cannot to continue.
Help Me!
Another Idea?
Hi,
I read several posts, but without real solutions. Maybe someone can help us all.
Dutch people with an Artemis that is stuck at the first splash-screen need the original dutch HTC Rom. It doesn't exist as far we can find. It's not a t-mobile or something, just not branded. If anyone has a WM5 original dutch we would be glad also.
The problem is we want to flash with USPL to other WWE rom, we can get into bootloader mode without problem. It get stuck at 3% when trying to flash rom.
When running USPL it asks to copy the same files again several times, with error messages 'device not connected' and then gets stuck at 50..... with 2 error messages, cannot copy cmd.exe.
My question is : does anyone know the real solution or has original HTC rom?
Thanks !!!!!
Innovator
I have a dutch HTCP3300. Trick is to 1st give a hard reset, and remove the microSD card. Then connect via activesync as a guest (no new partnership). When connected, use startuspl.exe.
Afterwards u can flash any rom, but after using B&B4.0 a while, i advise u to use the clean WM6 rom whch came out on juli 13 (the english rom from HTC asia.).
Works like a charm, but have no dutch language anymore. For that you will have 2 wait till september (i guess) or be lucky its any sooner.
Hangs at 50... when running USPL when bricked
Hi,
Thanks for the reply. Gave it a hard reset & removed SD card. Please note I cannot connect to activesync when phone bricked, so cannot chose any partnerships nor guests. I only hear a sound that usb is connected.
Do I have to use start_uspl while the stuck splashscreen is on, or in bootloader mode? I think it makes no difference, cause before when using start_uspl and phone was working, it got automatically in bootloader mode.
When starting startuspl.exe it says NO DEVICE CONNECTED! it first asks to copy again same files (several times) - i have to say no cause it keeps asking hunderds of times, and then I get at 30 and 40% : can't spawn 'cmd.exe'.... no such file or directory as start_uspl.exe and it hangs at 50....
I know how to flash, had B&B4.0 first before i got stuck, so i have to get into uspl with a bricked phone, anoter interesting thing for all users in this forum.
I saw in Trinity forum the guy 'Pof' made an 'unbrick' tool, would be nice for Artemis users also (and no 6 weeks waiting for repair service)
Thanks for any new help!
Innovator
Twiggerdingo said:
I have a dutch HTCP3300. Trick is to 1st give a hard reset, and remove the microSD card. Then connect via activesync as a guest (no new partnership). When connected, use startuspl.exe.
Afterwards u can flash any rom, but after using B&B4.0 a while, i advise u to use the clean WM6 rom whch came out on juli 13 (the english rom from HTC asia.).
Works like a charm, but have no dutch language anymore. For that you will have 2 wait till september (i guess) or be lucky its any sooner.
Click to expand...
Click to collapse
Twiggerdingo said:
I
Afterwards u can flash any rom, but after using B&B4.0 a while, i advise u to use the clean WM6 rom whch came out on juli 13 (the english rom from HTC asia.).
Click to expand...
Click to collapse
i agree 100%.
search for "P800w_SEA_ENG_WM6_Upgrade_20070713"
and
customize to your liking using the b&b apps to be found in all the posts and look for "palestrini" with most cabs.
greetz
Tried this already?
http://forum.xda-developers.com/archive/index.php/t-312495.html
Or just flashing the new WWE WM6 rom? Or tried flashing it via an empty microsd?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Good luck!
Bricked P3300 in splash / .nbh replacement or SD flash not working with CID lock
Hi,
Thanks, but no luck.
1> I tried the German rom (not the one for the orbit) and replaced the .nbh with the B&B4.0 & renamed, also with the HTC official and P800W Sea, but all 3 hang at 3%
2> My device isn't CID-unlocked (no supercid device) so through SD card it says 'Invalid certificate' or just nothing. I tried the HTC Official WWE, B&B 4.0, P800W SEA, renamed all 3 to ARTEIMG.nbh but no luck (due to cid locked i guess). Maybe I will do it when waranty is over. Hate to send it in to wait for 6 weeks.
If HTC repair service can do it, why wouldn't anyone from the xda developpers site cannot fix a bricked p3300? Or is the only method that i have the original dutch HTC rom (not branded) which isn't out.
Thanks if anyone can solve this problem!!!
Innovator
Twiggerdingo said:
Tried this already?
http://forum.xda-developers.com/archive/index.php/t-312495.html
Or just flashing the new WWE WM6 rom? Or tried flashing it via an empty microsd?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Good luck!
Click to expand...
Click to collapse
Wat numbers do you see in the colored screen? Ie Ispl?
look here: http://forum.xda-developers.com/showthread.php?t=312871
if you know someone with a working dutch artemis, you can make a rom backup out of it and flash it to your device.
ok, i know its not the easy way, but at least it seems to work.
Backuped up Dutch Rom please
Hi Twiggerdingo,
The numbers are :
IPL 3.07.0001
SPL 3.07.0000
GSM 02.95.90
OS 3.4.0.0
B&B4.0 was flashed with uspl from the original WM5 Dutch rom. B&B Worked perfect, but everything went wrong when flashing ARTE_NLD_WM6_RvBCrS. It was an .nb file, converted it to .nbh (cause always hangs with bat file) but no luck. It seems that it always goes wrong with a .bat file and a OS.NB file. Never been stuck with an upgrade.exe and an .NBH file.
Hope I can fix it this week instead of sending in for repair and 6 weeks waiting... If anone has the dutch original rom (or can make a .nbh backup) ?
There is also a htc rom tool version 1.0.1 (rombuilder by dark simpson) i saw on this forum. You can select a rom, choose country id, language, ...
I wonder if I could change the country id,... to the same as my dutch rom, so that it would flash, but can't remember the country id the other data.
Thanks for any help!!
Twiggerdingo said:
Wat numbers do you see in the colored screen? Ie Ispl?
Click to expand...
Click to collapse
maby stupid from my side.
are you running XP or Vista??
Unbrick P3300 with Vista
Hi,
I'm running vista, but I can't see the problem, cause i flashed many roms without problems to B&B 4.0,...
What does Vista witheld that XP can with a bricked phone ?
Tomorrow my friend comes with his XP laptop, will this make a difference you think?
Thanks!
Marcus_de_zwarte said:
maby stupid from my side.
are you running XP or Vista??
Click to expand...
Click to collapse
1.12.404.1.nld
The only rom that can unbrick my device would be the original rom i guess, it would be the 1.12.404.1.NLD (9/12/06). Anyone can help me to find this one? Not on HTC site, no support at all.
Hi Innovator,
Vista seems to give some problems for some people when they are trying to flash their rom. its reported in several other threads. Mayby XP can help you, although when it HAS worked for you, i think the chances are small.
My GUESS is that you have to reflash your current rom somehow, so the last terrible rom youve mentioned. (dont know that 1...).
So this 1:
ARTE_NLD_WM6_RvBCrS
IPL 3.07.0001
SPL 3.07.0000
GSM 02.95.90
Afterwards use uspl. And then u can continue for another 1. At this point i dont think a original Dutch Rom can help you out.
upgraderom.bat = no device connected
Hi,
I will try tomorrow with XP, the problem is that ARTE_NLD_WM6_RvBCrS rom is an OS.nb file with an upgraderom.bat file.
When i try to upgrade rom with this batfile & .nb it says copy files again? with device not connected remark. This is the same as when trying to run USPL, so i think to flash like this you need a working phone. For USPL it needs windows CE to work and the same error.
How can I easily convert this os.nb to os.nbf ? I tried some tools but had to fill in a lot of stuff (didn't know what).
I like more flashing with upgrade.exe tool & .nbf files, no problems at all.
Thanks
Twiggerdingo said:
Hi Innovator,
Vista seems to give some problems for some people when they are trying to flash their rom. its reported in several other threads. Mayby XP can help you, although when it HAS worked for you, i think the chances are small.
My GUESS is that you have to reflash your current rom somehow, so the last terrible rom youve mentioned. (dont know that 1...).
So this 1:
ARTE_NLD_WM6_RvBCrS
IPL 3.07.0001
SPL 3.07.0000
GSM 02.95.90
Afterwards use uspl. And then u can continue for another 1. At this point i dont think a original Dutch Rom can help you out.
Click to expand...
Click to collapse
Hey, any luck on the XP-laptop?
Found this:
http://tools.ramonshare.com/?p=3
Look who posted it, the maker of your faulty rom!
also, maybe a bit more worrying:
http://forum.xda-developers.com/showthread.php?p=1269267
Sounds familiar?
RvBCrS Guy & rom-flashing
Hi,
No luck again.... repair service is nearby...
Tested all the roms on XP and same errors, hangs at 3% maximum.
I have the pdocwriteartemis by the RvBCrS guy, i put the os.nb in the rom directory and now it says 'not all depencies are found! now quitting".
RvBCrS says only OS.nb like i did, is there something wrong with this guy?
Maybe he can save his image on xda forum (and my Artemis).
Hope to find a quick solution...
Thanks!
Twiggerdingo said:
Hey, any luck on the XP-laptop?
Found this:
http://tools.ramonshare.com/?p=3
Look who posted it, the maker of your faulty rom!
also, maybe a bit more worrying:
http://forum.xda-developers.com/showthread.php?p=1269267
Sounds familiar?
Click to expand...
Click to collapse
Innovator said:
Hi,
No luck again.... repair service is nearby...
Tested all the roms on XP and same errors, hangs at 3% maximum.
I have the pdocwriteartemis by the RvBCrS guy, i put the os.nb in the rom directory and now it says 'not all depencies are found! now quitting".
RvBCrS says only OS.nb like i did, is there something wrong with this guy?
Maybe he can save his image on xda forum (and my Artemis).
Hope to find a quick solution...
Thanks!
Click to expand...
Click to collapse
did you try and use the "mitty routine"
or can you get it recognized by windows ? the reason i ask this is because i do have a back up image from WM5 NL (Tmobile)
let me know how i can help you.
neilhhardy said:
the reason i ask this is because i do have a back up image from WM5 NL (Tmobile)
let me know how i can help you.
Click to expand...
Click to collapse
do you have also a copy of wm5 nl for me ?
i want to back flash it but i don't have wm5 nl rom .
thanx daffy
Innovator said:
Hi,
No luck again.... repair service is nearby...
Tested all the roms on XP and same errors, hangs at 3% maximum.
I have the pdocwriteartemis by the RvBCrS guy, i put the os.nb in the rom directory and now it says 'not all depencies are found! now quitting".
RvBCrS says only OS.nb like i did, is there something wrong with this guy?
Maybe he can save his image on xda forum (and my Artemis).
Hope to find a quick solution...
Thanks!
Click to expand...
Click to collapse
try here and let me know how your doing.
http://eazyvg.wordpress.com/2007/05/23/running-wm6-on-htc-p3300-cid-locked/
Cannot flash with upgradeartemis.bat file in dos
Hi,
I'm really sorry but I cannot flash through a .bat file in dos, it asks always to copy the same files again, you have to take no cause it keeps asking hundred times (device not connected also mentionned)
Then you have to wait 12-20 min (if it hangs 30min mentionned) but it stays on the bootloader screen, nothing happens.
I can only flash with .nbh from storage card
or with upgraderom.exe (in windows).
Only from bootloader mode, cannot get into activesync also.
Best regards,
Innovator
Hello.
i'v downloaded the official rom from HTC site
whenever i try to Upgrade to this New ROM, i get an error messege, "Upgrade ROM Code Error", just after it reached to 100% of the upgrade... the Diamond enter to boot loader and stay there.
i tried and installed a previous ROM Version, and it successes with no problem.
i even tried replacing the HardSPL, now with OliNex Unsigned.
any idea ?
the same problem, the same question !
ariebk said:
Hello.
i'v downloaded the official rom from HTC site
whenever i try to Upgrade to this New ROM, i get an error messege, "Upgrade ROM Code Error", just after it reached to 100% of the upgrade... the Diamond enter to boot loader and stay there.
i tried and installed a previous ROM Version, and it successes with no problem.
i even tried replacing the HardSPL, now with OliNex Unsigned.
any idea ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=472184
u 'll get the answer here. ( may be updating from internal storage should help.)
chinmay007 said:
http://forum.xda-developers.com/showthread.php?t=472184
u 'll get the answer here. ( may be updating from internal storage should help.)
Click to expand...
Click to collapse
Thanks, trying.
Thanks!!
Working!!!
Moirror ?
Hi
anyone can upload for us to avoid the registration to HTC ?
Thanks
i flash this rom in my diamond,is prefrect,but i cant use the connection setup in china, is say no databasic in connection setup. someone can post a htc connection setup for diamond for me and make sure support chinamoblie.thx
hi, my phone is dead
I can only just get to the boot screen load
must pass an anova rom, but when I try to say it is invalid tool
may need to use USPL cmon, but I have no connection with the activsync
what can I do?
need a cd original orbital perhaps
Plsss
someone help
i need it so much
plss
i need on rom of TIM. BraZIL
Brazilan ROm Tim
try to load orginal rom
or
http://translate.google.pl/translat...a-logo-orange-problem-rozwiazany/&sl=pl&tl=en
don know if this will work for you. I don't take any responsibility for possibly damage caused by this method.
Tutorial is not mine.
fail.
show here
Could not open connection...device conected?
it's a big problem
how get it?
i need a rom TIM BRASIL
please
someone help?