Develop Bugs

P3300 rom doesn't install

Hello, i have a new P3300. The first time i opened it it started installing some basic stuff/programs and then worked quite good. Then i turned it off and when i turned it on again it shows the first splash screen with the htc logo, shows IPL and SPL versions on the left top side (like it should do) and then it instantly turns off. I have tried installing the official WM6 ROM again and again but after the installation finishes the problem remains. Also, when in confirmation dialog for the ROM to be installed or not when it shows the old and the new version, the old is completely blanc.
P.S.: Something else, when i connect it to charger (or USB cable) the orange light keeps going on and off about every 30 seconds.
Any help would be highly appreciated guys.

Send it back to your vendor for warranty...
Cheers

After many tries i managed to install some older official ROM but again after the initial screen calibration and the other stuff some customizations started installing and when PDA rebooted the problem appeared again. But tomorrow I'm getting it to service (and getting my Qtek 8310 back which by the way got a repair although unlocked ).

Device unresponsive no matter what rom?

HI all,
I'm having some fun and games with my Orbit today.
I previously had an old version of black & Blue on there. SO today decided to update to have a go with some manilla based ROMS.
First I Tried YuE_v11.3_3.15.20755_Lite_M2D_WWE
Which seemed to work ok but after a while applications were being very slow.
So then I tried to reflash oop, but that seemed to fail.
I Tried to flash love, but it wasn't ever getting to the progress indicator on flashing, so did an SD flash of YuE which worked.
So then tried to flash Love from that minimal YUE and the device is being really slow, like gets to the calibration and takes about 5 mins to swap between screens.
What's the best way to totally clear down the rom and start again on this?
Thanks

I've now flashed the Official UK O2 WM6 ROM and still having problems. Flashed succesfully, but when it boots up, it just sits on the "Windows Mobile" screen and beeps a bit

Current State after O2 flash :
IPL : 3.04.0001
SPL : 3.04.0000
GSM : 03.06.90
OS 3.4.0.0
Any help gratefully appreciated.
Thanks

Hard reset the device, and while you're in the config wizard, plug in your device and flash to new rom. That way it's completely formatted and you'll have a fresh new install... hope it works mate

I did a hard reset, still no joy, hangs on the welcome to windows screen
I can access the Bootloader, but can't find a way to flash a rom from there, all seem to want it done once you've made an activesync connetion

flash YUE back via SD card flashing

I already tried that, flashes fine, but becomes unresponsive soon after

have tried flashing O2 WM5 + WM6 from SD, but still no joy.
It just flashes, loads up WM(5/6) then hangs there, beeping sometimes. Pressing the green button brings up the calibration screen. I sometimes see bits of apps, today screen, but that's about it, it's generally unresponsive.
Any suggestions?
ta

A little update incase someone can help?
I left the battery out of the phone all night last night, and this morning the phone worked great.. for about 2 hours, then it froze. I hard reset, and it's back to freezing after OS loading now

What's up if you remove your MicroSD card ?

That makes no diff, i've tried flashing with + without the SD card (it's currently out), flashing from windows + flashing from microSD, all ends up the same way, with an unresponsive device once the OS boots.

Diamond wont detect networks and other problems - all of a sudden

Hi guys,
my diamond has gone berzerk!
it gave up on me all of a sudden....froze so i tried to restart and didnt work. i did a hard reset and eventually finished. the problem is that the phone wont detect any network, wifi and bluetooth are working but the 'phone' isnt - in comm manager enabling phone appears to do something showing the busy icon but then reverts back to 'off'.
im using hard spl 1.40
radio .25.08
and every rom does this.
the red reset button is also not doing anything more, i.e pressing it does nothing...
ideas???

oh and it occasionally resets too....

did a hard reset and the phone keeps rebooting....gets to the windows logon and then reboots....
anyone??

flash a stock rom fron bootloader mode it worked for me

simba2585 said:
did a hard reset and the phone keeps rebooting....gets to the windows logon and then reboots....
anyone??
Click to expand...
Click to collapse
how much?
after hard reset two time could be normal.

it restarts an infinite number of times - as if it gets stuck in some loop.
its very random so there can be periods of time where its fine and i think its cured itself then all of a sudden it will restart and be fine for a while then sometimes it can just get stuck in a restart loop.

have you find a solution?
i know from my experimentals that loopings are normal by ****ti-mitti-roms.
the rom could be fine, but one deleting file here or there let starts the looping.
try orig. rom from your device. if looping again ... dont know :-(

Maybe this thread can help you out, it's worth trying:
http://forum.xda-developers.com/showthread.php?p=3433851

Rebooted Touch Diamond and the circle LED was lit up solid. Any ideas?

Greetings All,
I had a very interesting problem happen to me and I would like to know if anyone else has experienced the problem before and what it could mean.
I went to restart my phone to boot into Android using GenY Dual Boot but after I had pressed the reset button the phone hung with a black screen and my LED circle constantly lit. Tried rebooting again and the phone did not want to know me however the circle went back to normal, it would get to the Touch Diamond screen where it will show you the ROM&Radio version on the bottom left and as soon as it got past that it would reboot and start the process again.
So I went and did a hard reset and still the phone would not boot. In the end doing a mtty flash, then a hard reset brought the phone back to life but now I am worried that there might be a underlying issue at play.
So my questions are:
What would cause the white ring to stay on?
Cause the phone to get stuck in a constant reboot?
Is there a problem with my phone that I need to get looked at?
Using the latest GenY D2X ROM with the HardSPL 1.93 and the radio 1.17. Just did a restart now and all is fine. Maybe it was a once off problem?
Thanks for any info .
/btw not sure what to search for hence the reason why i created a new thread.

Screen freezes on boot startup after installing new rom, HELP!

I installed a rom/hardspl and new radio yesterday, didn't like the rom so much for slowing sometimes, wanted to switch to another rom, saw the Eto.Y 2.4 sense 2.5 and tried to install (Didn't read that I have to change radio aswell), was installing well, though I didn't understand about the task29 thingy, still kept pressing next, till the download bar, I went to DC, came and found my phone soft reset, and finished the instalation, but the problem is, my phone freezes on the startup picture that says "TOUCH diamond"
Please help me solving this problem ASP!

Nvm, solved it, close this.