Hi.
Just trying SplashID on my XDA Exec (latest OS'es from O2).
I used it on my Palm years ago and like it so thought I would try the PPC version.
It installs and syncs fine, but if I do a soft reset (I do one at least once a day) the SplashID data disappears and is replaced with the default 6 dummy entries.
Anyone running SplashID on a Exec with O2 latest rom sucessfuly?
R
Related
Whe I use any of the today plugins like SPB pocket Plus most of the times after a soft reset the PPC freezes... It may needs 10 soft resets to work again!!!
Any help with this would be really appreciated...
Qtek 9090
Rom:
1.22.00 WWE
Ext ROM:
1.22.167 WWE
I know people with I-mate roms with no problem!! Should I put I-mate's rom??
I have the same issues..
I just stopped using those programs for that reason.
MS VOICE COMMAND 1.0 was bad for that too.
So I am not the only one!! :? :? :?
That's damn bad!!!
I've read this on the SPB site.. That the HTCs have this problem!! :x :x
The only solution is before a soft reset to remove the programm from the "today"... :twisted:
Are you using battery pack as well?
I had the same problem on my qtek9090.
I have done a hard reset and have installed all my programs one by one, but first SBP.
Than i have testes to istall Battery pack later on as last one and .....
no problems anymore. But why use Battery pack if you use SBP? So i de installed Battery pach.
Everything is working fine now for the last months.
Andre le Fevre
I tried them one at a time of course..
With SPB now you don't have a problem? It was the first programm you installed? What do you have it to show on the today screen? Apart from the program shortcuts?
ROM version?
I have had no such problems with my Qtek 9090, from the first ROM that it came with to the one I'm using now. I use PocketPlus 2.2 and T-Agenda, and it works perfectly.
i am using Tweak 2.41, Pocket Plus 2.2 and Pocket Hack Master 3.05. The results are that, although they are enhancement tools, but will slower my XDA IIs sometimes.... Therefore, they are not as stable as I expected. As a result, I removed them... Now, my machine work great and response fast (but two of ten times are slow especially I turn it on after few hours).
I think this is a rom dependent problem.
Since upgrading to WM6 Shadow, then CUSTEL ultimate I have had serious problems with Activesync.
AS is scheduled to sync with exchange server ev 10' in peak times. It usually works fine for a while, then it gets stuck: forcing a manual sync won't launch a gprs connection. Checking new exchange emails manually does not work either. the two problems are obviously related (to AS schedule?)
When i open the task manager, it works fine until AS gets stuck - then the task manager gets stuck too when identifying which programes are running.
i did not experience this type of problems when using JJ's earlier versions of WM6 but it has now become a common problem since upgrading to the latest rom (Shadow) and CUSTEL.
Have you got a similar problem?
How can I kill AS on the device, and start afresh? A soft reset won't do it. I am fed up of having to hard reset every few days..!
having the same problem!!!
using Satin Rom
I tried a couple WM6 ROMS on my unlocked M700 (inc. Bepe and standard DOPOD) and both had the same major issue - most nights, and after most (but not all) soft resets, the M700 would lose some of settings, most importantly the user/password entries for the GPRS connection and for the Exchange mail server. Other details, like the APN and Exchange server names, stayed intact.
Obviously it got a little annoying having to reconfigure these every morning before I could do some work, so went back to WM5 using the "Orange Backup" ROM. It's been fine since (4 days so far).
Anyone seen this before, and know of a cure?
Hi,
we are many to have this problem on TRINITY (Any ROMS) , you'll find a long THREAD about this in last month , whith differents solutions explained.
concerning me, as suggested in the thread,
- I disabled the taskManager inculded in the ROM (so X button works normal)
-i set up all my accounts/parms (mails,wifi,3G..) then I SWITCH OFF the phone (not reset)
When doing these 2 two things i don't have the prob anymore, but i guess just one is usefull in fact .
So i Still wait for someone finding really what the probleme and best FIX.
SP
Thanks. I'll try that when I'm brave enough to switch again. Found the thread you mention so I'll keep future feedback in there
http://forum.xda-developers.com/showthread.php?t=330967
My Vario II went dead on me (touch screen stopped working) about 6 weeks ago and I was so busy I didn't have time to put it in for repair (compounded by the need to downgrade to WM5 for warrenty purposes). I finished up using an old MDA phone (running WM5).
Around the same time, I got a Blackberry from my office and started using that for business purposes. And I grew to like it. Don't get me wrong, I always knew that it was a brain-dead phone compared to WM devices but it was so simple to use and the trackball thing is so smooth that I was starting to get seduced by it.
But I got my phone back today, immediately upgraded to WM6 (Schap's V4) and installed my old software - and the Blackberry is back in my briefcase. WM6 is so customisable and tweakable that it leaves the rest behind.
Schap's ROM is great but I'm having two problems. I really like threaded SMS and I want to install Skype (mobile) on my phone - but neither CAB works (both CABs worked fine on all other ROMs). The device hangs when I try to install either app.
Also, button 5 is normally configured for voice dialling but Schap's ROM maps it onto new SMS. I can't see how to enable voice dialling using button 5 (or any other button!).
Any ideas about either problem?
Bobby
Perform a soft reset, and then try to install the cabs... For the second issue, you can go to Start>Settings>Personal>Buttons and then choose the one you want for button 5....
Hi,
I have imate jasjam and using schap's WM6 4.31 ROM. Recently from last few days appointments keep on advancing by few hours randomly and sometimes they recorrect automatically. I have tried the following things with no luck:
1. Stopped activesync with pc for few days to see if that was the problem
2. Stopped data connection for few days
3. did not add any appointment for 2 days
4. tried with / without spb mobile shell 2
5. Reflashed jasjam original rom / Hard reset
6. Reflashed schap's rom / Hard reset
Yet the problem persists. During all these the time of the pocketpc never changes, and i never click on the visiting timezone in the clock settings.
Has anyone faced this situation or anyone knows what the problem is??
Thanks,
Stok Guru
PS I have already tried going to Dialer->Menu->Option->TimeZone->Automatic TimeZone box is unchecked.
Schap's WM6 4.31 ROM
stok_guru said:
Hi,
I have imate jasjam and using schap's WM6 4.31 ROM. Recently from last few days appointments keep on advancing by few hours randomly and sometimes they recorrect automatically. I have tried the following things with no luck:
1. Stopped activesync with pc for few days to see if that was the problem
2. Stopped data connection for few days
3. did not add any appointment for 2 days
4. tried with / without spb mobile shell 2
5. Reflashed jasjam original rom / Hard reset
6. Reflashed schap's rom / Hard reset
Yet the problem persists. During all these the time of the pocketpc never changes, and i never click on the visiting timezone in the clock settings.
Has anyone faced this situation or anyone knows what the problem is??
Thanks,
Stok Guru
PS I have already tried going to Dialer->Menu->Option->TimeZone->Automatic TimeZone box is unchecked.
Click to expand...
Click to collapse
Weird... I used Schap's 4.31 ROM for quite some time heavily using calendar, apoitments, etc... and I never had such problem...
I am sorry but I can't help you... I wish I could.
Cheers.
try using your device with another SIM card or without a SIM card for some time and watch the results.
could you please make a list of the application installed on your device?
have you applied the MS Daylight Savings Patch to your device? DST has been changed in certain timezones so the appointments that fall into the period between the old DST and new DST tend to shift by an hour.
If you want to try it, search for WMDST2008-1.CAB
Seems SIM is creating the problem
I did try without the SIM and it has stopped the problem. So I guess my carrier is sending me some thing that screws things.
Will have to sort this out with the carrier.
Thanx anyways to all u guys who have tried to help especially farres.
Stok Guru
Have you unchecked the Automatic change time zones option in the dialler options? Go to dialler / options / time zones tab.
Oops...just realised that you tried that. Thats a tough one you have there....