Hi
Im very new so i appologise for this, is the extended rom where the default apps reinstall after a flash?, ie the o2 active interface and the album for the cam etc?.
I recently went through flashing my xda2s to wm5, and when i went back down to PPC2003 i lost a lot of stuff and would like the facility of the auto-installs back.
I have updated the latest rom from the 02 site, but this doesnt do it.
Any ideas?.
Cheers
Julian
Look at WIKI there is a thread about downgrading, if you have used once WM5 and want to downgrade to 2003 you should repartition your device to use extended rom
Related
I upgraded to WM2003SE a while back and at the time had an Orange SIM in my XDAII and my 02 SIM in my E200 Smartphone. The extended ROM I used was Orange specific and contained all the necessary GPRS Configs etc
Anyways, I've now got a C500 with my Orange SIM in it and so the 02 Sim is back in my XDAII and I'm looking for a good External Rom dump that contains the UK 02 GPRS/WAP/MMS Configs etc and is compatible with WM2003SE.
Can anyone point me in the direction of one, I have looked and tried one or two but none have the correct configs for 02's GPRS service (Pay monthly not PAYG).
TIA
Did you get anywhere with this, Darren? I'm just wondering whether to upgrade my O2 XDAII to WM2003SE but the lack of dedicated O2 Ext.rom files (as far as I can tell) is putting me off.
I didn't but don't let that stop you, the SE upgrade is well worth it. I just removed all the O2 specific rubbish from the Ext ROM and it's fine.
Thanks for the reply.
I'd love to upgrade but without the O2 auto-config software in the ExtROM I wouldn't have a clue where to start configuring all the network, SMS, MMS etc settings for O2 pay monthly. Do you know of a guide or something somewhere?
Secondly, I searched earlier to try and find out which was the best ROM to use for those of us in the UK, but there didn't seem to be a definitive answer. Would you mind telling me which ROM you used and where you got it from if you're happy with it? I need Bluetooth headset, BT GPS, BT ActiveSync, speakerphone to work perfectly to consider upgrading. Currently my XDAII works like a charm with ROM 1.72 but some people seem to have had trouble with the SE upgrade and Bluetooth.
Thanks a bunch in advance.
I use all those BT functions alos, I used the 2.02 ROM available at the beginning of this thread.
I've left the auto config files in the Ext ROM so there is no need to manually configure anything. I have had zero issues with it since the upgrade I'm happy to upload my Ext ROM to an FTP if you want it?
The only critical noe I found was to remove the 'TPDisable' entry in the Ext ROM when performing the upgrade as you receive a lot of 'This isn't designed for WM2003SE' messages and with TPDisable enbled you can't click OK!
griffog said:
I use all those BT functions alos, I used the 2.02 ROM available at the beginning of this thread.
Click to expand...
Click to collapse
Forgive me if I'm being a bit fick, but I can't see where you mean. Have you a ROM available through your pocketgpsworld.com website? Or is there only one 2.02 ROM available and I can download it from this site's FTP? I thought the 2.02 ROM was the Chinese one.
griffog said:
I've left the auto config files in the Ext ROM so there is no need to manually configure anything. I have had zero issues with it since the upgrade I'm happy to upload my Ext ROM to an FTP if you want it?
Click to expand...
Click to collapse
I didn't know it was possible to upgrade the OS ROM without touching the ExtROM. I'm not a noob with the XDAII, but I've found the myriad threads and discussions on the question of 2003SE upgrades very confusing! Since there seems to be no obvious single solution I haven't known where to start.
If you have a working ExtROM for the XDAII on O2 UK and you wouldn't mind uploading it somewhere (this site?) I'd be very grateful. If you wouldn't mind pointing me to the main OS ROM image that you used as well then that'd be groovy too.
griffog said:
The only critical noe I found was to remove the 'TPDisable' entry in the Ext ROM when performing the upgrade as you receive a lot of 'This isn't designed for WM2003SE' messages and with TPDisable enbled you can't click OK!
Click to expand...
Click to collapse
I guess that's achieved by editing the config file in the ExtROM once it's all installed after an upgrade?
Sorry, I thought this was the original WM2003SE thread! The download I used is at the beginning of this thread.
It's a while since I upgraded mine, I had thought the Ext ROM remained intact but reading the thread instructions apparently not. Sorry I can't help more but as I say it's some months sisnce I did it!
Aaah. OK. Thanks again, but I think I'll leave it in that case. I don't yet feel brave enough to start messing about with home-cooked ExtROMs if you don't have yours handy. It was good of you to offer though.
Hi all, my new BA arrived finally! I have decided to keep it afterall. I am a total n00b at this stuff, and really struggle to understand the Wiki site. However, I did manage to download XDA tools and backup my ROM.
I then downloaded the PDA2k_WWE_14000_176_11200 ROM from the FTP site. It said it was going to update my Radio and Ext. ROM too. Anyhow, it comes up with the country code error.
I added that line of script into the file but it still has the error. Any ideas? I thought the iMate 1.40 ROM was supposed to work on the XDA2s.
I really want a more stable device. Are there any other ways to do this? I tried using XDA Tools to upload the NK part of the iMate ROM separately, but it said it needed to be an exact size to work.
What is the best ROM? We couldn't even figure out how to cook and Ext. ROM so if anyone could give me a hand it would be much appreciated. The Wiki assumes you know what you're doing but I really have no idea.
Cheers guys - Mike x
You don't need to use XDA Tools it you're using a standard manufacturers ROM, just the No ID program for the device ID shortcut.
I had to add the country code ID in too, but after that it was golden. Not sure what's up with you...
Chris
If you are on O2 UK and want the imate ROM that also has O2 settings for GPRS, MMS etc, have a look here:
http://forum.xda-developers.com/viewtopic.php?t=24000&highlight=
It's a set of instructions that I made using the wiki, as well as info other members had given me, particularly mdaIIIuser to upgrade a UK O2 XDA IIs to the imate 1.40 without having to enter GPRS settings etc manually afterwards, and still keeping the country code to O2 (which means you can use an official O2 upgrade later , without any problems, if they ever get their arses in gear!)
If you need any more help, let me know and I'll do what I can. If you have an ftp site you want me to upload my upgrade files to, PM me with the details and I'll send it you. I'd put in on the ftp here, but i don't think it's worth taking up so much space with a customised ROM.
HTH,
Fin
OK guys, I managed to upgrade my device to the latest iMate ROM, and the 1.13 radio ROM
Problem now is cooking my Ext. ROM. I know I can't update the Ext. ROM that came with the iMate ROM. I want to put my 02 settings in, but I really don't know how. It won't let me put my old 02 image back on the phone, it says the USB is not connected properly
Does anyone have the .nb1 of the 02 Ext. ROM?
Sack that. I downloaded the newest 02 Rom I could find and extracted just the ext. Rom file from the .exe
I am learning
which o2 rom did you use? if it was the uk rom you will have problems as it is 1.31 and your rom is 1.40. you need to unlock the extended rom and copy the base rom 1.40*147 then add your o2 cabs and anything else
hth
fin
Hey thanks Findus, your guide was great.
Yea, I put the 02 1.3 extended ROM on. I didn't know what else to do.
Do you mean the base extended ROM of the iMate 1.40 ROM I put on? I tried that, and there is no Config.txt in the iMate extended ROM.
Sorry, I don't understand this too well
Hey thanks Findus, your guide was great.
Yea, I put the 02 1.3 extended ROM on. I didn't know what else to do.
Do you mean the base extended ROM of the iMate 1.40 ROM I put on? I tried that, and there is no Config.txt in the iMate extended ROM.
Sorry, I don't understand this too well
I did not do anything with upgradetools.rar but the device seems to be working fine. I haven't made a call yet as I'm cut off. Does this mean I don't have to do it?
Chers -Mike
Glad to have helped, although I can't take credit, I got all the info from thw wiki and other posts!
Have just been trying to upload my Extended ROM, it is a modified version of Cooked ERK 1.4x Base that can be found in the wiki under ERK 1.40 . This version of the EXT ROM does have a config.txt, you were probably looking at 1.40.176? All I did was add the 6/7 O2 CABS to the config.txt of the base rom, then changed the caller id cab to 1.20 from the link below:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
You will probably have some problems with the Ext ROM you have on at the moment, because you haven't got any of the patches for 1.40 which might mean GPRS etc might be unstable.
I will try and upload my Ext ROM again later if you want, all you will need to do is unlock your ext rom, delete the files, and copy over the new files. DO a hard reset and you're away!
Good luck!
Fin
OK, I don't understand.
I just delete all the files (aside from the 02 setup ones) of my current ROM and put these ones in? I don't need to upgrade the Ext. ROM bith the BAUpdate thing?
No, you won't use the BA Upgrade itility- that is for reflashing, which if you had a ms_.nbf file(extended ROM installation file) you would need. There is no tool to edit ms_.nbf files on Blue Angel, instead you have to unlock the Ext ROM manually, copy/delete files, update the config.txt then do a hard reset. Takes some getting used to- I was used to using er2003edit with my Himalaya to make a custom ms_.nbf file, but hey, this method works too!
Good luck,
Fin
Hey man, I already did it! Well good! It's based on the Qtek ROM you reccommended with the o2 stuff added in and the caller ID updated.
now running:
ROM version: iMate 1.40.00 WWE
ROM date: 03/10.05
Radio version: 1.13,00
Protocal version: 1337.42
ExtROM: 1.40.147 based on the Qtek cooked for use on 02 UK
My phone hasn't required a single hard reset all day and is still recieving calls (with sound) and messages
Thanks everyone!
-Mike
Hi
I am about to get an XDAIIs to replace my falling apart PDA2K.
I want to use it on Vodafone.
Is there a real 'idiots' guide to putting the latest and greatest ROM onto the XDAIIs.
(I really do mean idiots guide by the way).
Cheers.
Robin
:roll:
i made : light power reset but it tell me erorr country id
why?
:roll:
use the MaUpgrade_noID.exe to start the upgrade. It is available from the ftp section of this site. I did this yesterday and it worked first time
Hi Weasel, what do you think of the Qtek ROM? I recently changed from the O2 ROM to the Imate version, would be interested to know what you think are the Pros and Cons of your latest ROM?
Thanks
Phil
Hi
I have just gone through the update process (to UNI_QTEK_13077_176_10900_WWE_Ship.exe) with my xda exec as I was on the latest o2 rom and I followed the instructions here:
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
The bit I hadn't picked up before was the .nbf files have to be in the same directory as the rest of the update and MaUpgradeUt_noID - I deleted the radio version witin the folder (radio_.nbf_) and then pasted in the 1.0.9 one which I downloaded speratly - hit MaUpgradeUt_noID and everything completed within 30 mins or so.
The xda is like a new machine compared to the old o2 rom I was on as it's soooo much quicker.
Oh i was worried about not having my o2 settings but if you download this cab file and run this cab[/url after you have finished setting it up on qtek rom you get all your setting back for o2 (choose basic when using cab not corporate as that doesn't seem to work!
Hi Andy, what do you think of the Qtek ROM? I recently changed from the O2 ROM to the iMate version, would be interested to know what you think are the Pros and Cons of your latest ROM?
sorry for the delay in responding:
My first impressions of the QTEK ROM were fine but.... on Sunday, the phone just stopped working completely - no signal etc. Hard reset was required to get it working again. I've disabled error reporting and will load my software back on later today.
Chris
Hello everyone,
sorry for posting this noob questions here, I see that you all are discussing software development and stuff, but it is the only place I've found to ask about it.
My situation: I have a Dell Axim X51v wich is still on warranty and CompleteCare (until march 2009!). It has a WM5 A04 Portuguese Rom wich is very unstable and quite lame (I don't like the system in portuguese!) and I'm looking forward to use the WM6 Football Rom, that everywhere I read says its very nice.
The fact is: If I had to call Dell for support, I'll need to give them the Ax with the WM5 Portuguese rom. I really consider this since the device isn't brand new and if something happens I don't want to loose it.
So, what I need to know is how (and if it is possible of course) to get the image of my Ax as it is now, to store in a safe copy on my pc or a cd, upgrade to Football's WM6 (wich version, btw? I see that there are RTM and Preview A06 on the thread) and then eventually get it back to my current rom, if I need to use the warranty. I know that the upgrade part is well documented around the internet, but the downgrade to the same or similar system is the major doubt.
I'll be grateful for any help. I'm new to all this and there are lots of knowledge around. Never had any experience flashing, just upgraded my ROM one time with the official procedure from HP, on my old Ipaq.
Thanks!!
I do not recommand to install the new file because they will broke dell warranty (I know you still come back to A12 rom but for potugal rom I don't know.
Well, I guess since you can flash a different language ROM of a different OS you could turn back to the other... or does there are problem flashing into an "older" version rom? (mine is A04 brazilian)
Anyway, thanks for the reply!
My WM5 is crashing frequently and I don't know why... I've installed some old dictionaries and maybe they messed it up. As I think on hard-reseting it, I consider the system upgrade, since WM5 is stupidly slow sometimes...
anyone else know about this rom switch-around?
I guess that if I have to call Dell, or my Ax is usable and I can switch the rom or it is unusable and probably they won't note that it was hacked! What about that?
hi, sorry if this topic has been posted before. and sorry for my ignorance on this topic.
i have an orbit that came with wm5 which i later flashed to the official wm6 via o2 upgrade website.
the only problem i have is that the new rom is taking up too much programme memory and has made the phone terribly slow.
i'd like to get it flashed with a rom that doesnt take up too much memory but the problem is that i cant find a step by step guide of how i should do this.
what is the most stable rom available for the orbit and where can i find it from?
if i get my phone flashed via a 3rd party rom will it remove the microsoft office mobile apps from the phone? (i really need these for my uni studies)
thanks in advance.
alrite mate,
what you need to do is make sure you run USPL first! otherwise u may BRICK your phone.
What I found the best rom to be is artemis touch 4.01. Try searching for it nad follow instructions in there. If i remmeber correctly the UPSL program is included in the update that you download.
good luck and enjoy the wonderful benefits of installing a custom rom!
'Artemis Touch 4.01" comes in several versions - Full, Lite, Vanilla, with and without cube etc. 'Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube' has an incredible amount of memory left over for running programs. A couple days of running it now and I have no problem keeping about 19-20M free. USPL is included with both ROMs mentioned here.
No matter which version you choose it will wipe clean everything on your phone. Nothing from before will remain. The good news is both ROMs mentioned here have the ms office mobile apps built into them. So, you will get those back. Before you flash, be sure the files you created using the office apps are saved elsewhere (memory card or via activesync to another computer), otherwise you'll be kickin' yourself.