Related
NEED HELP!!!!
i was trying to upgrade my xda IIs to
"ba_o2asia_14000_923_11200_ship (1.40.00)",
then when it comes to the third part "windows ce" it wont continue.
ived tried everthing like uninstalling and installing the active sync, reboot the pc and soft reset the unit.......
now all that appers on my screen is "USB, v2.07" and i cant use my unit.....
plus when i click connect in active sync on my desktop it wont detect my device.
HELP ASAP!!!
Try a Hard Reset
Try a Hard Reset, Power button + Reset hole at the same time, if it doesnt work after that you need to try again from the begining. try the BA for beginers WIKI http://wiki.xda-developers.com and look for someone with the same device as you in the same country in the forums, check what ROMs they are using in there Sig in order to find the most suitable ROM to try and install that one..
Having said this i am not an expert buy any means, but this is what I have done.
After I just installed my new Radio Rom this morning I was prompted to hard reset, I'm sure this is what you have to do affter a full ROM update, good luck.
The v2.07 dosnt mean youve ruined it so keep trying.. :wink:
hi hope someone can help me.i tried updati ng my xda exec after downloading the rom update from o2, and now my pc doesnt recognise the xda and my xda doesnt start its gone completely bank.i tried holding the softkeys and pressing the reset button, it says hit 0 to get back to factory settings and nothing happens........please it looks like my phones gone comatose
Moved to Uni Upgrade forum form Upgrade general
i believe u r stuck in bootloader
hi
try the following
disable usb connection from connection settings in active sync
then re upgrade the rom , and when you reach the screen where it tells u the rom version (it wont tell u this time) u ll HAVE to wait for few seconds before pressing "upgrade" , hopefully it will work this time
good luck
hi
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
Does anybody have a solution to the above problem as I now have 2 xda execs in the same situation. It's a bloody nightmare! I understand it's in bootloader mode. Just don't know how to get the xda up and running again without sending it off to O2...
Please help!
LOOK HERE I have been in this situation myself a couple of times. Personally I use method 2 which is at the bottom of the page as it's very easy to follow. I suggest you try this method first.
Regards,
Psi
Those of you having trouble after a Rom Flash. If it goes wrong, start by pressing THE BACKLIGHT BUTTON, THE POWER BUTTON AND PRESS IN TO THE SOFT RESET HOLE ALL at the same time. This should put you back into BOOTLOADER. Then try your rom flash again. If the WM6 fails I re-flashed with the O2 EXEC WM5 first. Forget Active Synch saying it cant etc.
Providing you can just see some very faint words then you are back in bootloader. I have got the original O2 XDA EXEC WM5 Rom files so if you want them, as I can not find out how to put a large zip file on here then I can email it to you. Let me know on
[email protected]
pls i need it send to [email protected]
Excuse my poor writing English.
I was cleanig my sd card whith sk tools program, and I made a mistake and clean all files from main memory.
Now I don't have access to the programs, and the soft reset and the camaras buttons don't work.
How can I do a hard reset in these circumstances?
Please help. I really need the phone working.
Thanks.
hard reset is usually done by holding in the top two inner (menu) buttons while pressing the soft reset button, let go the reset button first then when the warning comes on screen release the other 2. Then press call to start the reset process.
Thank you for the answer.
The problem is the soft reset button doesn't work.
Is there other way to do the hard reset?
hard reset
You shold do:
Start>settings>system>clear storage> it is a hard reset too
Surely if the files on the phones memeory has been wiped the pressing the buttons on the handset will be pointless as there will be no programmes/commands linked to them
Sounds pretty serious to me
reset problem
Gift said:
Thank you for the answer.
The problem is the soft reset button doesn't work.
Is there other way to do the hard reset?
Click to expand...
Click to collapse
Maybe you can try a reflash of the rom?
Thank you.
It seems that I have a serious problem.
If somebody know another way of doing the hard reset, please inform.
Gift said:
Thank you.
It seems that I have a serious problem.
If somebody know another way of doing the hard reset, please inform.
Click to expand...
Click to collapse
AeronK 's solution should work fine.
Hard reset how do?
hallo
i have another problem..my XDA ist blocked(security code ist unknown, job of my soon..
when i making hard reset, then XDA in the screen has 3 collored thong with these nr"I PL 1.25.0001 and SPL 1.25.0000"
when i push volume button up or down, with reset button xda start normally but ask for code
What ??is this??
P.S.
and i must wait for acces to enter code 8 to 16 min
Regards for All
Arthur
Ok, seems that the only way is to do a refash of the rom.
How do I make that?
Please help
Thanks.
PS: In the process I hope not to use the active sync, because it doesn't work in my computer
dude i guess you need to reflash the rom
yes you need active synch to run uspl which you need before you flash/reflash a rom
your alternatives
use SD flashing read about it in wiki xda developers i never used it but its there
all the best sincere wishes to recover your pda
Gift said:
Excuse my poor writing English.
I was cleanig my sd card whith sk tools program, and I made a mistake and clean all files from main memory.
Now I don't have access to the programs, and the soft reset and the camaras buttons don't work.
How can I do a hard reset in these circumstances?
Please help. I really need the phone working.
Thanks.
Click to expand...
Click to collapse
just another two thoughts are you aware that if you hold the power button the phone restart it like soft reset!! so i guess you may want to try this b4 anything else i mean hold the two soft buttons & attempt reset via power!!
you may also want to try a programme called IBE Tweaks it has HARD RESET feature built in it!!
let us know how things go
Reflash the rom & dont forget to run a uspl first
After several attempts finally I managed to do the hard reset using the buttons, and my pda is work fine again
In any way, I will try your indications to prevent futures problems.
Thanks jahrami, you have been very useful.
U most welcome so glad u got ur phone back
Congratulations
i want to upgrade my o2 xda iis to some newer 6.5.1 roms....(i'm currently using wm 6.5 rom re 7.1 by xplode..)however, my ba cannot enter the bootloader by using the enterbl.exe file....my power button button is damaged so i cant use the power+record+softreset bottloader entering..... please help me... i want to upgrade to other rom.....my wifi stop functioning after i upgraded to this rom from wm 2003se....anybody who knows, please help...
hfzarx said:
i want to upgrade my o2 xda iis to some newer 6.5.1 roms....(i'm currently using wm 6.5 rom re 7.1 by xplode..)however, my ba cannot enter the bootloader by using the enterbl.exe file....my power button button is damaged so i cant use the power+record+softreset bottloader entering..... please help me... i want to upgrade to other rom.....my wifi stop functioning after i upgraded to this rom from wm 2003se....anybody who knows, please help...
Click to expand...
Click to collapse
You could try to do this via MTTY (I cannot remember the command though), but I am sure it is somewhere out there if you search for it.
please post the command if you knew it...or if anybody does please post it.....i'd tried searching the thread but no luck....maybe i'm not so good with searching...whatever, please help me...
Simply google mtty +commands +Blue Angel
I believe that there was something on the wiki as well.
i don't seem to found what i'v been looking for.......thanks anyways....guess i had to stand with my current situation.....
Can you open it ? My Qtek9090 had a damage camera button and when ym opening it ther was a litle bit plastic shuffeld.
Its just a view torx screws to remove and carfull remove the front cover.
Look out for don't loosing the plastic buttons from the front, do it above a table or so, when a button get out you don't miss it.
Succes whit it.
i'd tried openig it...... and my power button seems to broken already....i'd had to take it to a service centre to fix that.......and my only choice for upgrading roms is by entering the bootloader by enterbl.exe.....and why the heck that didn't work....is there anyone else out there who had the same proble as me......?
I installed a HardSPL 1.40 Olinex. Then Custom RUU 23125 from here. I installed a wm 6.5 (i gues so). I run the OS and i began to personalize my new OS. The system buged and crashed. After reboot (by taking out the battery) the OS wouldn't start. I tried hard reset, but nothing. I am sorry for the very bad english, but i need help urgently ! ! ! I have the phone from 4 days If i only knew what will happen.... Thank you!
atomheart said:
I installed a HardSPL 1.40 Olinex. Then Custom RUU 23125 from here. I installed a wm 6.5 (i gues so). I run the OS and i began to personalize my new OS. The system buged and crashed. After reboot (by taking out the battery) the OS wouldn't start. I tried hard reset, but nothing. I am sorry for the very bad english, but i need help urgently ! ! ! I have the phone from 4 days If i only knew what will happen.... Thank you!
Click to expand...
Click to collapse
I would suggest you by following solution
1.Boot from MTTY way
2.Try SPL 1.93
3.Change your battery--i experienced once when i flash a new ROM and my diamond stuck on "TOUCH DIAMOND-the first screen" and then keep reboot. Then i change my battery, it boot just like nomal.
Good Luck.
ku9911 said:
I would suggest you by following solution
1.Boot from MTTY way
2.Try SPL 1.93
3.Change your battery--i experienced once when i flash a new ROM and my diamond stuck on "TOUCH DIAMOND-the first screen" and then keep reboot. Then i change my battery, it boot just like nomal.
Good Luck.
Click to expand...
Click to collapse
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
no need to get back to 1.39 .. olinex 1.40 works fine. maybe just the rom is faulty when after reset+vol down+enter does the same error!
get onto boot loder (reset + vol down) when you get the "serial" label, plug in the usb, do the task 29 to format the phone, and get some other rom, and flash it with provided exe file.
atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
Are you using Atlas rom? or what? This rom has a bug in this moment of installation that sounds like your behavior...
I have several problems with 6.5/6.5.x newer builds before I switch to hardSPL 1.93 developer edition. This hardSPL could be installed to the phone also in the situation when no active sync connection is available. Simply run "installer" and go through the process as usual, you will see that it works...
Mbiba
mbiba said:
Are you using Atlas rom? or what? This rom has a bug in this moment of installation that sounds like your behavior...
I have several problems with 6.5/6.5.x newer builds before I switch to hardSPL 1.93 developer edition. This hardSPL could be installed to the phone also in the situation when no active sync connection is available. Simply run "installer" and go through the process as usual, you will see that it works...
Mbiba
Click to expand...
Click to collapse
I am with Energy ROM 2.xxxx. I' ll try this right now.
260 error
it ' s give me error 206 (telephone not connected). How to instal whatever without a USB connection and ActiveSync? It doesn' t work> It' s stuck now on Starting Windows screen: Preparing for first use....."
Flash a stock rom with stock spl from bootloader (press soft reset then volume down ) then re try with hard spl and put another rom like energy rom that works for sure (at least for me)
atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
seems u did not read much before flashing. I guess you can easily solve the problem following Post2. You are doing Hard reset (reset+down+middle). It would not solve the problem. For new flash or mitty you have to go to boot loader screen (reset+down vol. key) (not the middle key). Also Active sync menu: file->connection settings, deselect 'Allow USB connection'.... then start flashing new rom (more details see Mitty or flash thread):
http://forum.xda-developers.com/showthread.php?t=540290
http://forum.xda-developers.com/showthread.php?t=416211
in simple english,
MITTY: for formatting ROM so that no old data will mess up with new rom (not always required but solves many wiered problems)
I once faced such problem , Mitty (once) and flashing rom (twice) solved the problem
HELICOPTER88 said:
Flash a stock rom with stock spl from bootloader (press soft reset then volume down ) then re try with hard spl and put another rom like energy rom that works for sure (at least for me)
Click to expand...
Click to collapse
Thank you man. It works now. I installed this rom: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe.
Can you, or anybody give me some advice about which Rom should I install, to install wm 6.5 for my phone. Is there some "light" ROM, or something, for wm6.5 (working).?
atomheart said:
Thank you man. It works now. I installed this rom: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe.
Can you, or anybody give me some advice about which Rom should I install, to install wm 6.5 for my phone. Is there some "light" ROM, or something, for wm6.5 (working).?
Click to expand...
Click to collapse
I think currently the best is ralphusion J with only few bugs and issues.
Mbiba