Radio Version: 1.11.00 was just released for the Dopod 900 ROM update
How's the performance? Can someone upload here?
Thanks
Radio 1.11
Radio 1.11 ;-)
http://sebbbbb.free.fr/9000/UNI_radio1.11.rar
upgrading
i'm upgrading, thanks for the upload, i'll give my quick feedback later today
I'll have a try on it... Thanks for sharing the news
Curious
I really wanna know what's new in 1.11
1.09 was allready a big improvement for me.
I have been using radio 1.11 for about 24 hrs now and comapred to 1.09:
1. Signal strength is less in same areas
2. Calls are answered immediately (so did 1.09)
3. Call clarity is a tad better (less noise, drop out and echoes)
I will be flashing back to 1.09 because point 1 above is more important than point 3. The difference is not much anyway.
Oh! I forgot. In both radios I am unable to get the Time Zones page via the registry hack:
HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword).
I wish I could get this working as I travel a lot
no
no more bt voice command calls from bt headset, even if i re-install bt hack.
nothing more at the moment
Just upgraded to Radio 1.11.
all I can say right now is that I can't dial from my BT headset (HBH-662).
when I press the button on the headset, it establishes connection, all sounds from JJ are now coming out from the headset until I press the headset button again, sound goes back to JJ.
Note that NO BT voice command hacks were installed before or after, I dialled using Cyberon VC and it used to work perfectly.
Back to 1.09 i guess!
Cheers
JP
How about trying to associate the voice command files again? Maybe it just needs refreshing after the upgrade.
Did you check the registry for
HKLM>SOFTWARE>OEM>VoiceCommand>LaunchAPEnable
as "1"????
Hope this help.
Cheers,
I installed. What surprised me most is the AS doesn't work fine any more. My pc is Win2003 with no firewall at all. And Qtek1.09 works fine before. I decided to back 1.09.
docraj said:
I have been using radio 1.11 for about 24 hrs now and comapred to 1.09:
1. Signal strength is less in same areas
2. Calls are answered immediately (so did 1.09)
3. Call clarity is a tad better (less noise, drop out and echoes)
I will be flashing back to 1.09 because point 1 above is more important than point 3. The difference is not much anyway.
Oh! I forgot. In both radios I am unable to get the Time Zones page via the registry hack:
HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword).
I wish I could get this working as I travel a lot
Click to expand...
Click to collapse
Same observation here , V 1.06 is the best from BT headset & battery life point of view.
hymmm, I find 1.11 heaps better.. using latest o2 rom...Wakes up alot faster when ringing, works fine with bluetooth supertooth II, and battery life is great... If anything it has made the unit feel faster...
wormdrummer said:
hymmm, I find 1.11 heaps better.. using latest o2 rom...Wakes up alot faster when ringing, works fine with bluetooth supertooth II, and battery life is great... If anything it has made the unit feel faster...
Click to expand...
Click to collapse
Same findings here. Runs very well, no problems.
Cheers
hrb
Did you check the registry for
HKLM>SOFTWARE>OEM>VoiceCommand>LaunchAPEnable
as "1"????
Hope this help.
Cheers,
Click to expand...
Click to collapse
Thx chris but it was already set to 1
Cheers
JP
hrb said:
wormdrummer said:
hymmm, I find 1.11 heaps better.. using latest o2 rom...Wakes up alot faster when ringing, works fine with bluetooth supertooth II, and battery life is great... If anything it has made the unit feel faster...
Click to expand...
Click to collapse
Same findings here. Runs very well, no problems.
Cheers
hrb
Click to expand...
Click to collapse
Is it better in terms of voice quality , signal and BT than 1.6 or 1.9 ?.
I am asking this because I am using a BT JX-10 and 1.06 and sometimes the voice is "droping" during a conversation.
Also I get some noise.
The radio stack "seems" to connect quicker to the bluetooth headset. Otherwise signal is the same and their is no issue with the bluetooth headset. I have microsoft voice command that transfers over the headset and its working just fine. It would be nice if this radio could cook me dinner and also make my jas jar boot in 3 seconds but it won't. It makes me laugh when people say signal strengh is better or lower. LMAO Sorry to break the news but the radio stack does not make the difference in signal, its the cel towers. If you want better signal go to another gsm provider or modify a bigger antenna.
Mike
Actually Mike, I dont agree; I think it is handset dependent also to some extent. I was recently out on vacation and my friend had a generic Nokia and mine was the O2 Exec. Same service provider for both. He had a full signal whereas my exec had either zero or one bar signal.
Cheers!
Mikee4fun said:
LMAO Sorry to break the news but the radio stack does not make the difference in signal, its the cel towers. If you want better signal go to another gsm provider or modify a bigger antenna.
Mike
Click to expand...
Click to collapse
how d'ya do dat?
My JJ is giving me grief, this despite the fact that I've upgraded the rom twice now. My problem is that I get missed calls and often have to redial outgoing numbers.
I want to try the new radio version. I have 1.09, but would like to try 1.11.
How do I go about doing this?
cheers,
edved.
Re: upgrading
rip said:
i'm upgrading, thanks for the upload, i'll give my quick feedback later today
Click to expand...
Click to collapse
I downloaded this file and it is in Francais. Which is my native tongue, but not my JJ's native tongue
any help would be appreciated.
cheers,
edved.
Related
Try this???? Came with my new I-Mate PDA2 extended rom.
This may only work on the Alpine and it may mess up your Himalaya or any other device...
USE AT YOUR OWN RISK AND DO NOT COME *****IN TO ME IF YOU BREAK YOUR PHONE! :twisted: :evil: :shock:
I installed this thinking that maybe it would show the NAMES on the Caller ID display.
Instead, now it doesn't show ANYTHING - Not even the number.
I have a Blue Angel device, if that helps.
Thanks,
IceCream
bt800
If you are geting caller ID only on your device, consider your self lucky. You need no fix.
On the Himalaya, you need 2.20 and Hands Free mode just to make it work a little! :twisted:
Names will never be displayed unless Jabra updates the firmware.
I tested it out all day and found one nice thing..
When you press the button to answer a call, it ACTUALLY DOES.
Only had to press it one time, as well.
Now I am torn between having the number display, or having the answer "feature" work. ;-)
-IceCream
On the Blue Angle, is it a MS stack or Broadcomm?
If MS, the update fix will not work. If Broadcomm, it may.. The I-mate pda2 uses Broadcomm.
If you have MS stack, you need to pair in Hands Free mode. Headset mode will not work, it will give you a LONG delay befor it answers and NO caller ID.
On the Himalaya, the BT800 only works under the 2.20 Translated ROM.. NOT 2.02 or 2.06. On the 2005, it works fine.
However, I have not tried the "fix" from I-mate for the PDA2 on the 2.20 or 2.06 or 2.02. The 2.02 or 2.06 will never work because the Hands Free Profile does not work right. The mic does not work with 2.02 or 2.06 and it has a stero affect from the speaker and mic still working on the phone.. (only sound on the device of the BT800 or any other device)
icecreamguys said:
I tested it out all day and found one nice thing..
When you press the button to answer a call, it ACTUALLY DOES.
Only had to press it one time, as well.
Now I am torn between having the number display, or having the answer "feature" work. ;-)
-IceCream
Click to expand...
Click to collapse
BTW, you are deleting it from both the device and the phone, and rebooting BOTH, and then re-pairing it, right?
BTW, you are deleting it from both the device and the phone, and rebooting BOTH, and then re-pairing it, right?
Click to expand...
Click to collapse
Yes, I did.
Thanks,
IceCream
Hi guys!
As wrote before in many other threads....caller id function in my Jabra 800 works as you described (only number but not name). Truthfully I can live without it....but the main problem is that it takes about 4 or 5 times to press answering button before I can hear my opponent. Also it takes about 2 seconds to conect.
That's really my biggest problem.
So, I wonder if this fix file can help me.
I have Qtek 9090 with Dangard rom 1.40.147 and 1.12 radio (bt 3900).
Please help, cause don't want to litter my PDA with unnecessary fix cabs.
Many thanks.
Leo.
As with all testing, use sprite back up or sunnysoft back up before you try anything. If it does not work, REWIND!!! :lol: :lol: :lol: 8)
Same situation here.
Repeat: use Qtek 9090 with Dangaard ROM 1.40.157
BT 3900, Jabra BT 800. Used this cab. Nothing broked. :lol:
But, now answering option works fine, exept - I can't here number on the BT device :lol:
Really cool :lol:
So, best way to wait for new cab fix, which will help to see number on the Jabra's screen.
:lol:
Anyway thanks.
You are MAN!
Sorry, tested little bit more and found out that Fix cab didn't help.
Now also I can't here numbers. :evil:
Anyway, today I'm going to reflash PDA with new ROM.
Hope that Jabra customer service will actually help us.
:?
hiya chaps, just wondered if anyone has upgraded to thE 1.11.00 radio rom, as i seem to have problems now with it.
i seem to be missing calls even though i have full signal, when people call me they say it goes straight to voicemail. as far as i can tell, this isnt a network problem, as i have 2 o2 phones and people can always get me on my other one, has anyone else had this problem???
Im going to downgrade back to 1.10.00 to see if this does shift the problem anyway.
joey. 8)
I've got exactly the same problem. I'm using a T-mobile mda pro with a Qtek rom
1.30.77
1.11.00
Sometimes the phone rings like 1 sec and then I have a missed call. Or it just doesn't do anything and I have a voicemail later on.
I've had this problem since the beginning. Used like radio 1.03 1.07 1.09 1.10 and 1.11
My battery lifetime is degraded to like 2 days now. If I disable BT it seems it lasts much much longer.
I'm thinking of maybe changing it to the original "new" t-mobile rom and look if that solves anything. I'm hesitated because I would need to reinstall all the programs again and I dont really feel like it.
I might just flash the radio to 1.10 or 1.09 so that I doesn't have to reinstall. Maybe I wait for the new radio
I've been using this radiorom for almost 2 months but I don't have any errors with it... maybe it depends on the network you use, too... (nokia or ericsson base stations for example, etc)
I have this problem with 1.11.00 after every true missed call.
why don't you upgrade to 1.13 version, already uploaded to ftp
I'll try it.
Thanks.
Update: I think it's fixed with 1.13.00. Thank you!!!
hi,i cant found on ftp this radio rom
Search in uploads.
Good luck!
i've always had these kinds of issues on all the different model pda/phone smartphones. i just get used to it....
besides it's usually my wife getting me tp bring something home for dinner.
Viper® said:
I've got exactly the same problem. I'm using a T-
My battery lifetime is degraded to like 2 days now. If I disable BT it seems it lasts much much longer.
Click to expand...
Click to collapse
It is normal that when you Leave your BT enabled it will deminish you battery more faster then when it's disabled... Don't leave your BT on for a long period of time, BT constantly sends a radio signal with a range of 10 meters, so everytime it's sending signal it will degrade your battery that is normal...
Dears....this is what i call best of the best.....after a lot of FLASING....the best performance,stability,functionality and no HANGS.....is this compination.....the latest Hilmi WM6 v1.1 with Radio 1.13...and if you care about adding the Arabic languge to your device .....the Arabizer works like i have never seen before even with the original rom came with my device....one more thing a can say....as we all know there still NO VIDEO CALL...I DID NOT TEST THE 3G ( WE DO NOT HAVE UNTIL NOW.. USING GMAIL INSTED WORKING GREAT )...
I WILL KEEP THE REST FOR YOU......
REGARDS
I have helmi's 1.1
Causes me some problems with mobinil GPRS ...
Sometimes locks up and would no connect till i soft reset
Which operator did u test with it.. Mobinil?
I have Radio 1.14 . Did you try Radio 1.14?
ksameh said:
I have helmi's 1.1
Causes me some problems with mobinil GPRS ...
Sometimes locks up and would no connect till i soft reset
Which operator did u test with it.. Mobinil?
I have Radio 1.14 . Did you try Radio 1.14?
Click to expand...
Click to collapse
Yes...the problem is Radio 1.14....i did test it .....alot of hangs....just try 1.13 working very smooth and also Arabizer
problem is 1.13 has very low voice quality and voice tends to skip a lot specially with vodafone..that was with inrda 3.3 b6 .
now am using 1.14 with mobinil...very very bad gprs performance..voice is ok though...
i will try to go back to 1.13
thanks a lot
sorry
I'm sorry to bother you guys with what will probably turn out to be an easy solution/answer, but.... how do you get 1.1 wm6 with radio 1.13? i figured (and already flashing) that i should download helmi 1.1 ( the x.rar file) and download the German 1.13 radio rom (only one available, is there a difference in the languages regarding the files it installs?) and overwrite the files inside the "x.rar" (helmi's 1.1 wm6 rom) and THEN upgrade? i'm really really confused here....
My dream would be:
A guide to:
Installing wm6
with stable rom/radio whatever
and WORKING gprs (t-mobile)
And that when someone calls me, it DOES ring, instead of a half second ring before the voicemail kicks in
if anyone would like to help me personally out with the first part, and a lot of people with the second.... i would be very thankful!
Muchos gracias from The Netherlands
bastiaanoskam said:
And that when someone calls me, it DOES ring, instead of a half second ring before the voicemail kicks in
if anyone would like to help me personally out with the first part, and a lot of people with the second.... i would be very thankful!
Muchos gracias from The Netherlands
Click to expand...
Click to collapse
the phone ringing bit! just goto phone pad> menu> options>services tab> call forwarding,. get settings then adjust the settings when they come onscreen ie untick forward all calls, or change the amount of seconds to "forward after"
Arabizer & Hard keyboard!
astraman said:
Dears....this is what i call best of the best.....after a lot of FLASING....the best performance,stability,functionality and no HANGS.....is this compination.....the latest Hilmi WM6 v1.1 with Radio 1.13...and if you care about adding the Arabic languge to your device .....the Arabizer works like i have never seen before even with the original rom came with my device....one more thing a can say....as we all know there still NO VIDEO CALL...I DID NOT TEST THE 3G ( WE DO NOT HAVE UNTIL NOW.. USING GMAIL INSTED WORKING GREAT )...
I WILL KEEP THE REST FOR YOU......
REGARDS
Click to expand...
Click to collapse
Hello astraman. Thank you for your post, it's really enlightening. I want to check something with you...
1. Agu_Gaby Arabizer built 347.
2. Arabizer built 337.
I have used Helmi, Indra & PDAVIET and installed both the above (1 & 2). I realized with #1, when installing the Arab_Keyboard_fix files, the enlglish typing with the hard keyboard, it allow 70 charecters as well as arabic. Whereas with #2, with the same Arab_Keyboard_fix files installed, I get 160 for english and only 70 for arabic!
Now what is the difference and how to resolve this?
If any of you members know what's wrong, please explain..
thanks
Where Can I Get The 1.13.oo Radio From?
Thanks
This idea doesnt work for me. I use Vodafone UK, and after this radio install, its been one problem to the other. Major hangs, going back to 1.14
Yes, you are right 1.13 is better tahn 1.14.1, as gprs in 1.14 wouldn't reconnect after a voice call, sometimes it hangs in dialing and doesn't work unless you soft reset. Those peoblems occurs also with many wm5 and all other wm6 not helmi only. But after downgrading to 1.13 it is better now and no problem in dialing at all, but the GPRS problem aoccured once with me. I am using Vodafone, and didn't try it with Mobinil. I didn't install arabizer yet, hoping to try that version comes bundeled with Jasjam, it was the best in wm5 but not tested yet with helmi wm6 v1.1.
hbahaie said:
Yes, you are right 1.13 is better tahn 1.14.1, as gprs in 1.14 wouldn't reconnect after a voice call, sometimes it hangs in dialing and doesn't work unless you soft reset. Those peoblems occurs also with many wm5 and all other wm6 not helmi only. But after downgrading to 1.13 it is better now and no problem in dialing at all, but the GPRS problem aoccured once with me. I am using Vodafone, and didn't try it with Mobinil. I didn't install arabizer yet, hoping to try that version comes bundeled with Jasjam, it was the best in wm5 but not tested yet with helmi wm6 v1.1.
Click to expand...
Click to collapse
what network do you use and where are you located? I think this might have to do with service providers. now I am back to 1.14 and my exec is happier .
I'm using Vodafone AU on Helmi 1.1 WM6 w/Radio 1.14...
No Problems here yet...
In Italy too with 3, no problem with radio 1.14
I am using LVSW ROMs since 26/03 version, through 08/04 until present 19/05. I also have 1.41 version of Radio ROM. Since I've started using these ROMs, I'm noticing problems with radio stack.
For example, while I was driving a car across Europe (UK->PL) few weeks ago, GSM module hanged almost every time I was crossing a border between countries and phone was loosing signal from one country and had to register in another. All I could see was little [!] sign instead of signal bars, and restarting phone module and/or whole device could help it. Two days ago I was on M1 from Sheffield to London and I've noticed that GSM module just died - pressing green button did just nothing (despite I had full signal bars), and people trying to call me that time, were saying they had regular calling signal, like I was missing a call. Besides that whole device was working properly, with no problems whatsoever.
On the other hand, I have no problems with dropped calls or data sessions. Looks like it is happening mainly on the move, and phone has problems with registering with network properly.
So there is a question(s) - does anyone have similar problems with LVSW ROMs or 1.41 Radio ROM? Should I downgrade Radio ROM to 1.40 or 1.38? I have HardSPLv7 installed, so is it safe to just use this RUU - ftp://xda:[email protected]/Uploads/Hermes/HERM_Radio_Only_1.40.30.00_CustomRUU.rar ? I've been searching forums, but haven't found much information on *downgrading* Radio ROM in particular.
Thanks in advance for any suggestions.
Its the radio rom causing you problems. I've also had problems with data connections in particular using ROM 1.40 and 1.41 (in Asia, on UMTS and EDGE networks).
Suggest you re-flash the pretty-much proven 1.38 ROM. You can find the download link from the Wiki.
radio downgrade
I used the 1.40 on black 2.5 and it was ok , then I upgraded to 1.41 radio and I had problems with the sound quality so I downgraded to 1.40 and the sound become back good
I have HardSPLv7 installed and I am on orange IL Israel
I used for downgrade CustomRUU and had no problems on the downgrade prosses
now i am using the last version of LVWS with radio 1.40 and it is working ok
hope this info help you
another remark :
try to install first the radion and on top of it os and not first os and then radio , i notice in a change of battery life in those 2 variants
Were you driving too fast for the phone to keep up with the radio transmitters passing by????
I'm also using LVSW 19-05 and Radio 1.41 but not having any significant issues unless a program runs at 100%, then the person trying to call me hangs up before the phone starts ringing!
Ciao Oggy.
It's not the LVSW ROM.....! It's the radio 1.41 And this radio was tuned for Cingular. I am on Cingular and i personally think that 1.40 is much much better. Read up on the two radio topics for more info on the two. So the bottom line is it's NOT LVSW at fault here. it's the 1.41 radio...
DAFTEK said:
It's not the LVSW ROM.....! It's the radio 1.41 And this radio was tuned for Cingular. I am on Cingular and i personally think that 1.40 is much much better. Read up on the two radio topics for more info on the two. So the bottom line is it's NOT LVSW at fault here. it's the 1.41 radio...
Click to expand...
Click to collapse
Yeah, that's what I thought, but wasn't 100% sure either. I'm going to downgrade to 1.40 tonight and will observe any results...
Thanks to all for your inputs.
to be fair I think there is a problem with t-mobile uk at the moment with handovers, let me explain.......
I have a active data connection.........
phone is on 3G, everything fine
phone switches to 2G, data connection is still active, no problems
phone switches to 3G, data connection is broken and the radio reboots (scrolling dots ect.)
I can (and have) replicated this with EVERY radio from 1.27 to 1.41 (and I do mean EVERY radio)
I've also tried EVERY WM6 rom out there all do the same.
so I can only think its T-mobile playing up, its just strange that everything worked fine with WM5 as I remember (and no Im not flashing back to find out!)
Hi, I'm in the Netherlands. Just tested the 1.40 because 1.41 disconnected all the time. So far so good (5 calls later..). Downgrade went fine with the customRUU. Regards Bas
ratcom said:
to be fair I think there is a problem with t-mobile uk at the moment with handovers, let me explain.......
I have a active data connection.........
phone is on 3G, everything fine
phone switches to 2G, data connection is still active, no problems
phone switches to 3G, data connection is broken and the radio reboots (scrolling dots ect.)
Click to expand...
Click to collapse
Interesting - it might be worth to check, but here in London it's actually hard to find a place where phone would switch itself 3G->2G. But anyway, I had problems not only on T-Mobile UK network, as I stated in first post, so I rather think it's Radio ROM related problem, more than network.
Sorry...I've been to positive. Right now only incoming calls come through. Outgoing is still a disaster. I'll downgrade to 1.38. Ill let you know if this works..
Currently in Thailand on DTAC, an EDGE network (all their GSM networks here have EDGE).
Radio 1.40: Voice calls were okay, didn't seem to have any problems, until I tried using data (gprs/edge). The data connection was completely unstable and unusable. Downgraded to radio 1.38...
Radio 1.38: Everything okay so far, EDGE data and voice calls.
Same boat!
Yup, same thing here with T-Mobile and the 3G/2G thingy.
Though I must admit 1.40 is pretty sucky anyway, 1.41 was worse.
Considering going back to 1.38, I've forgotten what it came with 1.2x or something, which, for its sins was pretty OK.
Oi! T-Mobile!! Sort it out before I head back to Orange!!!!
Actually, forget that rant, no point taking two steps backwards and starting to pay per MB again!!! LMAO
mccreath said:
Yup, same thing here with T-Mobile and the 3G/2G thingy.
Though I must admit 1.40 is pretty sucky anyway, 1.41 was worse.
Considering going back to 1.38, I've forgotten what it came with 1.2x or something, which, for its sins was pretty OK.
Click to expand...
Click to collapse
One more thing, which just came to my mind - in the original T-Mobile's MDA Vario II Extended ROM there is a file called P_rilgsm_patch.CAB, which could be related to Radio. Maybe this is a key for these problems? I guess this patch is network-specific - well, I believe this patch is there for a reason...
Btw, I've just downgraded to 1.40...
Error message flashing Radio 1.40.30
Hope someone can help me with this. I'm encountering an error message when trying to flash to radio 1.40.30. I have Custel 2.5 installed on a JasJam with Radio 1.41 currently.
When I run the update RUU program and click the AutoDetect button, I get a message that says "Error, Unknown version! You should pick SSPL".
I have HardSPL7 installed, so my question is, is it safe to force SSPL? Is that what it is asking me to do?
Thanks.
Nevermind, I think I found the answer finally - it only took many days:
1. Select "2.10 new..."
2. Tick "Is it HARD Spl?"
And then run the update as per normal.
where is the link to downgrade the radio 1.38
thanks
naxos said:
where is the link to downgrade the radio 1.38
thanks
Click to expand...
Click to collapse
You will find all the Radio roms available at this link:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
thanks man
tried P_rilgsm_patch.CAB which as made abit of a mess Could some post rilgsm.dll from a LVSW rom plz as I managed to backup the wrong file
ratcom said:
tried P_rilgsm_patch.CAB which as made abit of a mess Could some post rilgsm.dll from a LVSW rom plz as I managed to backup the wrong file
Click to expand...
Click to collapse
OK, but how to actually copy/send rilgsm.dll file?? Each time I have 'File cannot be copied' message, or such like... :-o
Btw, what happened, when you applied rilgsm patch?
i now get a "E" icon instead of "3G" and the radio seems slower handing over from 3G to 2G and back (thank god my stairs are 2G only!) I've sent you a PM on how to copy that file.
I am having major problems with the voice dropping out on my end. I can hear the other person, but they can not hear me. This happens sometimes right away when I make a call and sometimes a few minutes into the call.
The same problem is happening to me with every version of ROM and Radio Version I have tried:
WM5.0
WM6.0
WM6.1
I have a HTC 8500 Hermes (8525 without the camera) - ATT/Cingular that I am running on the TMobile Network.
I am currently running CRC's WM 6.1 with Radio 1.54.07.00
I get great signal and good data connection. The calls do not drop entirely only my voice outgoing.
I ran the network selection wizard and selected T-Mobile without result.
I have spent hours reading the forum and searching for posts about this...
Any help or ideas?
Thanks
where u located? what plan u on? look at these prior threads on the subject from a xda google search...maybe some help:
http://www.google.com/search?hl=en&...=&as_occt=any&cr=&as_nlo=&as_nhi=&safe=images
Slicksixgun said:
I am having major problems with the voice dropping out on my end. I can hear the other person, but they can not hear me. This happens sometimes right away when I make a call and sometimes a few minutes into the call.
The same problem is happening to me with every version of ROM and Radio Version I have tried:
WM5.0
WM6.0
WM6.1
I have a HTC 8500 Hermes (8525 without the camera) - ATT/Cingular that I am running on the TMobile Network.
I am currently running CRC's WM 6.1 with Radio 1.54.07.00
I get great signal and good data connection. The calls do not drop entirely only my voice outgoing.
I ran the network selection wizard and selected T-Mobile without result.
I have spent hours reading the forum and searching for posts about this...
Any help or ideas?
Thanks
Click to expand...
Click to collapse
With using a Bluetooth headset or straight through?
Have you flashed to the EXACT factory ROM/Radio for your model and see if you have the same symptom?
Hi there,
please refer to this thread. might help you find a solution or 2.
http://forum.xda-developers.com/showthread.php?t=352218&page=2
Main ideas is
1. Disable your start up animation sound
2. Do not enable WOW HD Settings on boot up.
I am in Dallas, TX using the T-Mobile Network.
So far, I have only tried straight through. I will give the hands free and bluetooth a try. Thanks.
Also, I have tried 3 Shipped Roms or Factory upgrades (Cingular WM5.0, ATT WM 6.0, HTC WM 6.0)
I looked at the thread link and went through all of my phone settings, but I am not sure how to disable the start up animation sound or WOW HD settings on boot up.
I will keep searching the forums' threads, but if you have some instructions that would be great.
Sylpheed said:
Hi there,
please refer to this thread. might help you find a solution or 2.
http://forum.xda-developers.com/showthread.php?t=352218&page=2
Main ideas is
1. Disable your start up animation sound
2. Do not enable WOW HD Settings on boot up.
Click to expand...
Click to collapse
OK, I found this posting:
06-05-2008, 07:19 PM
bjevers
Senior Member Join Date: Feb 2006
Location: Ankeny, IA
Posts: 104
Mine has gone all day and it seems to be working. I think it's the SRS_WOWHD_bt_fixed cab like wikiri mentioned.
__________________
OS 5.2.19588 (Build 19588.1.1.4 PV DVH) 6MB PP
Radio 1.54.30.10
The problem is that I can not find how to fix or reinstall the WOWHD. Is it a patch or a setting change?
With the hands free plugged in the phone works perfectly. If I unplug the hands free then the mic goes out or is patchy.
it sounds very much like my phone problem that i had. I use the mic and the other side couldn't hear me well, keep saying i sound too far away. Once i turn on the bluetooth, they could hear me loud and clear.
If turning off Starting animiation sound and WOW HD Settings doesn't work. chances are you have a bad mic and need repairs.
Thanks for your posting on the problem with my mic on the Hermes. It is definately the same problem you had. I was wondering if you could help me with how to turn off the WOW HD settings and initial animation. I have searched the forums and can only find that I should do these things but not how. I am running CRC's WM6.1 v.11. I can not find a program called WOW HD in the settings.
Thanks alot!
I am having the same problem except the conversation goes well for a minute or so then the person on the other end can not hear me.
The solutions given don't work for me and I never used SRS WOW.
Use Schap's Advanced Configuration Tool to change all these settings.
I'm hoping the phone doesn't need repair. It just stopped working and when it does work is clear and precise. Does anyone have any other ideas?
addicus, I have had the same problem with my 8525 on Tmob here in Chicago. I think my problem is a combination of poor signal quality/radio rom.....I wonder how much this has to do with Tmob upgrading their network to 3G.
Vision77 said:
addicus, I have had the same problem with my 8525 on Tmob here in Chicago. I think my problem is a combination of poor signal quality/radio rom.....I wonder how much this has to do with Tmob upgrading their network to 3G.
Click to expand...
Click to collapse
What's up Vision77. I believe this has a lot to do with the 3G upgrade for TMobile USA. I never had this problem until 4 days ago and I know my area (Southern California Inland Empire) is being upgraded soon as part of Los Angeles.
I flashed a new radio last night and it seemed to have solved the issue from my test. Chexk out my signature for the radio # and good luck.
All Hermes radios are available on the wiki or through CRCinAU's signature.
yea, I found radio 1.47.00.10 to be the best w/tmobile out West, back in Ohio, in Texas, and even roaming in Mexico!