Linking my XDA2s to Nokia C7-7W - MDA III, XDA III, PDA2k, 9090 General

I have tried to pair my XDA2s (Blue Angle) with my Nokia C7-7W car kit. My XDA searches but does not find the car kit....any ideas please.

It does work!
I have my BA paired no problems - are you pairing during the first 30 seconds after the car kit is switched on? That's the only time that it searches.
Hope this helps!

nokia handsfree and blue angle
Hi,
I can now pair the nokia CK-7W to my XDA2s...but cannot get them to connect...do you have any ideas?
Thanks

Solved it
I did a hard reset and when it reloaded the bluetooth connection manager mad the connection with my device first time.........now I'm happy.

Related

Problems pairing with GPS

Hi,
I had an old ROM release on my Qtek 9090 and with it my GPS Bluetooth device worked fine.
Yesterday I got myself a Parrot EasyDrive and it would not connect to my Qtek 9090. It would however work fine with my 2 Nokias.
So I decided to finally (after one year) upgrade my Qtek and I used the 1.42 ROM from this site.
No the Parrot EasyDrive works fine, but my GPS receiver has this annoying problem: whenever I want to use the GPS receiver, the pairing window opens up, asking for the passkey (1234). The problem is, that it won't keep it, no matter what I do.
I tried to remove the GPS-Device in the Bluetooth manager and I deleted the pairing partnership. Then I made a new connection with pairing, etc.
After turning Bluetooth off, the pairing information is lost.
Meanwhile, the Parrot Easy Drive carkit works fine.
Any suggestions?
Cheers,
vma
Well, I ended up solving the problem myself...
While messing with the registry to remove the operator branded dialpad of the new ROM I installed, I managed to mess up my Qtek 9090 and lost the screen alignment. Because of that, I could not access the lower part of the screen anymore, thus it became impossible to realign the screen.
As stupid as it might seem, I had to do a hardreset at end, otherwise the device was useless (Side-question: is there any shortcut to get the screen alignment for the Blue Angel?).
After doing the hardreset and after re-installing all applications again, I paired both the carkit and the GPS receiver without problems.
It seems that if the pairing goes wrong the first time, one has problems afterwards. Would be nice to know how to really reset all connections without having to do a hardreset.
For all of you that went through the pain of reading my two posts:
I purchased an Parrot EasyDrive carkit, which was on sale for 35 Euro. It is a device that plugs into the carlighter and that has voice recognition.
I then passed new cables for Ground and 12V from the lighter to under the steering wheel and attached them to the speaker part of the carkit.
The result is a proper Bluetooth carkit with voice recognition (you say "telephone" and then the name and the carkit dials the number on the phone - all contacts have to be send one by one from the phone's contact list through Bluetooth and then you train the name twice - memory holds 200 contacts), where you just see the little knob with the two buttons - for just 35 Euro!
I say, that's an excellent deal!
Cheers,
vma

Omiz Bluetooth Headset 5130

Dear Gurus,
I got the Omiz Bluetooth Stereo Headset last night and haven't had any success pairing it with my phone!
Do you think it's the Bluetooth version?
This is what happened:
Dopod searched and found the device( Cyber Headset), key in pass key
Set as Handsfree.
But on the headset, the orange searching light keeps flashing....
Alas, there was no sound
On my powerbook, I managed to paired them up but after listening to 1 song, there was a Bluetooth Audio error and the partnership went off and could not be paired again.
Tried it on a Nokia phone and it didn't work too.
But could establish partnership with Sony Ericsson and a Panasonic phone..
I've soft reset the phone and the headset a couple of times to keep trying but to no avail.
Does any here know what the problem might be?
Thank you very much!

Problem: Nokia HDW-3 BT-headset - HTC PC3300

Hello,
I'm using the HTC P3300 PDA and I would like to use it with my older Nokia HDW-3 bluetooth headset. Pairing is succesfull and I can use the headset without a problem. But when I don't use the phone/headset for (example) 30 minutes and I would like to call someone, the P3300 displays a headset symbol, but I can't hear anything through the HDW-3. Turning off the headset and turning it on again will fix the problem...only for a short time. It looks like both devices can connect and work correctly, but after a standby time it doens't work anymore without a headset reset.
Does some recognize this problem? When pairing both, only the "handsfree" profile is available. (No headset profile?). The HDW-3 has always worked perfectly with my Nokia 6600 till last week (before upgrading to the HTC P3300). So I don't think it is defect. The P3300 works great with my Parrot 3100LCD bluetooth carkit, so it is unlikely that bluetooth on the P3300 isn't working correctly. What to do?
Thanks in advance for any reply.
Regards,
Roger

JABRA BT320s

Anyone had any success pairing the JABRA BT320s with MDA 2 and if so, do all the functions of the bluetooth stereo headset work?
Thanks.
Upgrade
Purchased Jabra BT320s and paired with Vario 2 after upgrading ROM. Everything working fine with excellent sound quality. I did not try to pair with Vario 2 on old WM 5.0 ROM so I cannot say if the BT320 would work on this OS.
I DID try to pair a BT320s with my TyTN a while ago, no luck......im going to try again now, as i was quite annoyed it didnt work. Will report back soon.
EDIT:: Gonna need to get a plug adapter as i forgot the dumbasses i bought it from sent an EU power supply and not a UK one...LOL!
from what i remember it was around JUNE time when i tried it, sounds like the bluetooth drivers may have changed since i tried it but it did seem as if the headset was the problem and not the drivers as i have had other A2DP headsets working fine.
Jabra BT320's
Bluetooth can be a real pain at times - with unpredictable results. I cannot begin to tell you how much wasted time I have spent trying to pair gadgets together - so it was a pleasent surprise to find the Jabra's paired first time and functioned as described.
Wishing you LOL.
tange.
well i tried it again and even on my pretty up to date ROM it only pairs as a headset and not wireless stereo urgh!
may be worth a rom upgrade?
i have a 320s (uk version bought from a tmobile shop - their selling them for 25quid) and it works fine on my wm5 spv m700 and is detected as wireless stereo and headset
mrvanx said:
well i tried it again and even on my pretty up to date ROM it only pairs as a headset and not wireless stereo urgh!
Click to expand...
Click to collapse
i had the same issue with this thing ... i did a hardreset and it showed up as stereo headset again. i had to do one anyway...
@all how do you like the jabra? mine is quite noisy ... i use my ugly samsung speakers instead and thinking about buying a 3.5mm adapter for the car.
I have been playing with the bt320s for a few days on different roms for my wizzard. I have been tring some WM5 and WM6 roms for features and bluetooth options. What i found was that I could pair with WM5 but even if it gave me the stereo option it was only in mono. After a google search i found someone mentioing that WM5 only supports Mono.
I then tried a couple of WM6 roms and found that they all supported the stereo correctly.
I then hit a problem as I decided that a ROM i tried earlier had everything i wanted (Diamond). So, decision made, I flashed the rom and tried to pair and it would only pair on headset and not offer the stereo. Very wierd as it worked before????.
I then found a post on another site which mentioned the following with the Bt320s headset.
1) delete any pairings on the phone.
2) switch of headset
3) plug the charge into the mains
4) put the charge into the headset 3 times for 5 seconds each.
5) Recreate the pairing with the phone.
Sounds wierd but it worked??????
I now have a wm6 rom with stereo bluetooth.
the only problem now is that WM6 closes all my apps when i switch it off and on using the power button.
This seems to be a bug when you enable a security pin in WM6 which i am forced to do via a directpush policy from work. Does anyone know a workaround for this as it is anoying to have your cub/pointui/media player etc close on you and go back to the home screen whenever I use the power button.
*****Orange are selling the Jabra BT320s online for £9.50 at the moment. Well worth the money*********
Quick update, on the latest pandora ROM (Tytn) ..... Its working great.
OhtwoXDA2 said:
1) delete any pairings on the phone.
2) switch of headset
3) plug the charge into the mains
4) put the charge into the headset 3 times for 5 seconds each.
5) Recreate the pairing with the phone.
Sounds wierd but it worked??????
Click to expand...
Click to collapse
Just tried this trick and it work! I have a Jabra BT620.

Setting my bluetooth headset to the HTCs620

What's good. A few Months back, I decided to update my Tmobile dash to 6.1 , which works fine. I had even got the Keyboard fix a few minutes ago. The only problem that I am facing , is that I can not pair my jabra dogtag blue tooth to the 620. I can pair to other phones and pcs, but I can not seem to get that headset to pair up? any suggestions?
bluetooth
biggz09 said:
What's good. A few Months back, I decided to update my Tmobile dash to 6.1 , which works fine. I had even got the Keyboard fix a few minutes ago. The only problem that I am facing , is that I can not pair my jabra dogtag blue tooth to the 620. I can pair to other phones and pcs, but I can not seem to get that headset to pair up? any suggestions?
Click to expand...
Click to collapse
Did you use the bluetooth explorer on your phone after turning on your phone's bluetooth on your comm manager and had your headset on pairing mode? it should find it . Make sure your headset is fully charged.

Categories

Resources