Help me pleased!! My new XDA II is dead - Upgrading, Modifying and Unlocking

Hello!
The screen on my XDA went black and phone botons are always ligth. It won't switch on.
I have tried a soft reset and removing the battery but XPA II no work.
Can anyone help?

can u put it in bootloader mode by pressing power+camera+action and soft reset? can u post the picture here?

What´s the actiin botton?

That's the "select" button on the D-Pad... When you press directly in the center.

I tried put in bootloader mode but the pda not work. Maybe it´s a rom´s trouble?

When I put in bootloader mode, it show the work SERIAL V1.09.
Can I make a update the firmware without sync?

Related

Please help dead XDAIIi

Hello, I have tried to update my ROM with the latest one off of the O2 website, however the screen on my XDA went black half way through and now it won't switch on, have tried a reset, removing the battery and still nothing the Update did say it had failed, Can anyone help, it is my main phone and i am really stuck.
raffe90 said:
Hello, I have tried to update my ROM with the latest one off of the O2 website, however the screen on my XDA went black half way through and now it won't switch on, have tried a reset, removing the battery and still nothing the Update did say it had failed, Can anyone help, it is my main phone and i am really stuck.
Click to expand...
Click to collapse
Try update the rom in bootloader mode again by holding the Power button + 5way button and push the reset hole.I used to have the problem like that and I tried to update the rom many times. I luckily succeeded.Try again please. Goodluck.
what do you mean +5 way button? what is bootloader mode? Same thing happened to me i was uploading the latest rom for my xda ii mini when i got cut then my phone now is dead blank. I just see Serial v1.00. HELP!!!
the camera button+middle button+power button+reset
the power button, reset button and the middle button called D pad button.

help !!! hardspl problem

please help me!!! after flashing Unsigned-Hard-SPL-Diamond-OliNex.zip on diamond screen appers this: YOU DON`T HAVE PERMISSION TO USE THIS ROM CODE and phone restart all time. What to do ? Urgent!!!
nobody knows ?
Download and flash another HardSPL. Maybe just a bad flash.......
but how to connect to pc ? phone restarts all time
did you hard reset?
Blazeitup123 said:
did you hard reset?
Click to expand...
Click to collapse
Yes, do a hard reset and wait till you can set date and time. That's where a connection with your pc is made. If mobile device center is connected, flash again the SPL.
Then do the same and flash ROM again.
Big thx to all. Only flashed another rom and problem solved.
Cannot get to set date and time
iXiR said:
Yes, do a hard reset and wait till you can set date and time. That's where a connection with your pc is made. If mobile device center is connected, flash again the SPL.
Then do the same and flash ROM again.
Click to expand...
Click to collapse
Hello,
After flashing, my MDA C4 with HardSPL 1.40 permanently reboots!
I tried Hard Reset, but it doesn't reach date/time screen
It formats itself, restarts and shows splash screen, after few seconds shows Radio/ROM versions on right bottom corner and restarts!
How can I get into flashable mode?
Enter in bootloader. Hold Volume Down button while with stylus press on reset button.
How can I reflash my device directly from bootloader screen???
borce_razor
THANK YOU!!!
the same way as you normally do

Bricked MP6900SP

My friend got a MP6900SP, and he tried to download a rom and flash it.
Now the phone is bricked, can't power on.
When connect to PC, nothing happened.
If I press power + volumn down + reset, PC will found a device.
No bootloader screen (tri-color), screen is totally blank.
RUU can't found the phone.
I did some research, but got confused.
Most post are for Verizon phone, not sure if they work the same for spring.
So, I am just checking to see if there's a way to revive my friend's phone.
Thanks all for the help!!
try to update via SD card
search for updating the bootloader via sd and also updating roms via SD
sounds like you may need to try updating the bootloader via SD first
good luck
chocobozero said:
My friend got a MP6900SP, and he tried to download a rom and flash it.
Now the phone is bricked, can't power on.
When connect to PC, nothing happened.
If I press power + volumn down + reset, PC will found a device.
No bootloader screen (tri-color), screen is totally blank.
RUU can't found the phone.
I did some research, but got confused.
Most post are for Verizon phone, not sure if they work the same for spring.
So, I am just checking to see if there's a way to revive my friend's phone.
Thanks all for the help!!
Click to expand...
Click to collapse
Have you pulled the battery and let it sit for a minute then put the battery back in and tried to power on?
Blank screen and cant power on? sounds like something far more than bricked from the ROM he tried...
If you can get the screen I would try the suggested route with the flash from bootloader/SD card technique but if you cant get a screen at all no matter what and swapped out batteries as well (have seen a bad battery cause similar issues and may be a coincidence this is happening during a flash attempt)
Detroit Doug
To enter bootloader:
Power+Camera, then reset. No volume button.
TheChampJT said:
To enter bootloader:
Power+Camera, then reset. No volume button.
Click to expand...
Click to collapse
Thank you!!
bootloader mode flash was successfully revived the phone.
Not sure what "power + volumn down + reset" mode is, but PC does show fine a data interface when I press them.
Anyway, thank you all for the help!!
You guys are good!!
chocobozero said:
Thank you!!
bootloader mode flash was successfully revived the phone.
Not sure what "power + volumn down + reset" mode is, but PC does show fine a data interface when I press them.
Anyway, thank you all for the help!!
You guys are good!!
Click to expand...
Click to collapse
i dont know how to put my mp6900sp in bootloader mode i tried the above still doesnt work only the start up screen and then it stays on
I don't know what the OP was saying about the volume button.
But just to be clear: if you are stuck at the bootup screen, having problems connecting and/or need to flash via SD card.....you want to quickly press and hold the top Power button + right side Camera button, then the bottom Reset button. The phone should display the rainbow screen and will say "Serial" on it until you plug the phone into your computer, when it should change to "USB".
For more help see this post and because I recommend an NFSFAN ROM this thread and this thread.

Big problem with frozen screen and posible solution dont work, please help me.

First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
labtelcel said:
First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
Click to expand...
Click to collapse
what do you mean by( I can't unlock the exca)?
Hard Reset
Hard Reset will most likely solve the problem. I had the same problem.
TO HARD RESET:
-Turn off the phone
-Hold 2 soft keys
-press the power button for 3-5 seconds(still holding two soft keys)
-black screen will show up saying that pressing send key(green) will restore your settings to original settings.
-press send(still holding two soft keys)
-the end.
NB: YOU'LL LOSE YOUR PHONE'S DATA.
For Hard-Reset see sticky "a picture tells a million words"
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
labtelcel said:
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
Click to expand...
Click to collapse
Don't understand bolded?
You have tryed Hard-Reset not work, remove battery for about 5 mins and replace, try again "Normal boot then if not work try Hard-Reset"
Sorry for my poor english, Im from mexico.
I try the master reset many times it does not work, of several ways, extracting the battery for 5 minutes, 1 hr, 3 days, and it does not complete the reset, freeze in the htc screen, or another times in windows mobile logo screen.
When attempt to change the flash (for solving the problem) the process does not continue of 3%, this happens so I cant execute the jump USPL aplication.
In summary:
reset hard not work (hold 2 soft keys / turn on / black screen / send key)
Change the Rom for repair de damage not work (I cant load the aplication for jump USPL)
Write Rom direct in the bootloader (3 color screen) not work (hold camera button and tur on)
Any idea?
Change bootloader?
Another powerfull rom?
Special software?
Special combination to delete all in the internal memory without entering Romupdateutility locks or windows?
Please helpme to recover my excalibur.
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
boss_of_any_phone said:
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
Click to expand...
Click to collapse
Just shows sometimes can miss the obvious, bootloader in sticky & flash original ROM in stickys too..
Dont work the reflash in bootloader (try 10 times), I flash the rom and the phone frezz in the same screen (WM logo screen).
Help.

ATT TILT 2 owned since released stuck in Boot Screen

I have a Stock TILT 2 (TP 2) never flashed running basic programs Mobile Shell never had any issues with it, haven't installed new software in a few weeks , but I soft resetted it this morning and it keeps getting stuck in the boot screen. when first turned on it will run through boot screen then load screen for a millisecond then back to boot screen and never advances again , I've tried battery out sim card out Sd card out everything, even tried hard reset , but wont allow me to hard reset with front buttons and power, is there another way to hard reset , is it possible my phone just bricked for no reason ? thanks for any help ?
have you tried to do a hard reset via the pc? the original rom is on the htc website so you can try useing the exe file there. there is also an updated rom you can try to flash there. hope that helps
You might try sending it to the bootloader screen and reflashing. I don't know if it will work, but I thought it might be worth the effort.
I did notice that HTC removed the original shipped ROM for the Tilt2. I'm sure it is floating around here somewhere. If not, I have it and can send it to you when I get home.
Thanks I have original rom and just released wont work.
dod you see anythign on teh screen? if you do, then hard reset may fix it.
Power off your phone (or take teh battery out). Then press and hold teh call and hang up button while press teh power button. it will enter the hard reset mode. (remember hard reset will erase all the info on the phone and rever tot the stock setting).
jcterry said:
I did notice that HTC removed the original shipped ROM for the Tilt2.
Click to expand...
Click to collapse
wow, thank god i dl'd it when i dl'd the updated rom... and they still have the image of the old rom right beside it... lol
as for op, you can try to enter the bootloader with the following steps
Remove the back cover from the phone.
Hold the Volume Down button.
Use the stylus to press the reset hole.
Or if the device was powered off, press the power button whilst holding down the Volume Down button.
and try to flash from there
hope that helps again

Categories

Resources