Develop Bugs

ATT TILT 2 owned since released stuck in Boot Screen

I have a Stock TILT 2 (TP 2) never flashed running basic programs Mobile Shell never had any issues with it, haven't installed new software in a few weeks , but I soft resetted it this morning and it keeps getting stuck in the boot screen. when first turned on it will run through boot screen then load screen for a millisecond then back to boot screen and never advances again , I've tried battery out sim card out Sd card out everything, even tried hard reset , but wont allow me to hard reset with front buttons and power, is there another way to hard reset , is it possible my phone just bricked for no reason ? thanks for any help ?

have you tried to do a hard reset via the pc? the original rom is on the htc website so you can try useing the exe file there. there is also an updated rom you can try to flash there. hope that helps

You might try sending it to the bootloader screen and reflashing. I don't know if it will work, but I thought it might be worth the effort.
I did notice that HTC removed the original shipped ROM for the Tilt2. I'm sure it is floating around here somewhere. If not, I have it and can send it to you when I get home.

Thanks I have original rom and just released wont work.

dod you see anythign on teh screen? if you do, then hard reset may fix it.
Power off your phone (or take teh battery out). Then press and hold teh call and hang up button while press teh power button. it will enter the hard reset mode. (remember hard reset will erase all the info on the phone and rever tot the stock setting).

jcterry said:
I did notice that HTC removed the original shipped ROM for the Tilt2.
Click to expand...
Click to collapse
wow, thank god i dl'd it when i dl'd the updated rom... and they still have the image of the old rom right beside it... lol
as for op, you can try to enter the bootloader with the following steps
Remove the back cover from the phone.
Hold the Volume Down button.
Use the stylus to press the reset hole.
Or if the device was powered off, press the power button whilst holding down the Volume Down button.
and try to flash from there
hope that helps again

[Q] BAD Flash when updating radios, who can I pay?

BAD Flash when updating radios, who can I pay to fix this?
Or anyone know of a way to fix this?
It appears to be bricked
When I flashed the ATT_Radio_Rhodium_4.48.25.95, I didn't rename it to RUU_Signed
Now I get nothing when I restart the phone, just a black screen.

[email protected] said:
BAD Flash when updating radios, who can I pay to fix this?
Or anyone know of a way to fix this?
It appears to be bricked
When I flashed the ATT_Radio_Rhodium_4.48.25.95, I didn't rename it to RUU_Signed
Now I get nothing when I restart the phone, just a black screen.
Click to expand...
Click to collapse
is your phone a gsm rhodium or does it have a cdma module too?

Both I believe

This happened to me last night. I reflashed the ROM to fix it. I used MightROM which is FRIGGIN' Awesome if you ask me
In order to do that though you need to be CID unlocked though but basically as long as you are in the bootloader/bios then you can flash the new ROM from your PC via the USB. If you need any links to that stuff I can post, but I am not quite sure if this would be part of XDA or not (Is MightROM xda? Idk? PPCGeeks??)
You can also try holding down the Call answer and Call end buttons at the same time with the power button then put your battery in. This didn't work for me though, but I had to do this anyways after I flashed the ROM so it might work.
edit: Sorry I misread. I am not sure about the Black Screen. Might work though. I was in the bootloader/tricolor to reflash. Maybe your LCD is dead or something for all I know. Sorry Mate.

[email protected] said:
Both I believe
Click to expand...
Click to collapse
oh god then you flashed a GSM radio to a CDMA worldphone (just because it has a GSM module doesn't mean you can flash a GSM carrier radio to it... nope!!)
if you plug it into the PC does the PC try to install some USB driver?

[email protected] said:
BAD Flash when updating radios, who can I pay to fix this?
Or anyone know of a way to fix this?
It appears to be bricked
When I flashed the ATT_Radio_Rhodium_4.48.25.95, I didn't rename it to RUU_Signed
Now I get nothing when I restart the phone, just a black screen.
Click to expand...
Click to collapse
It is simple. You obviously have a CDMA device. It doesn't matter if you use it on a GSM network. Your device is and always will be a CDMA device. NEVER try to flash ANYTHING GSM on it or you run the risk of permanently bricking it.
To fix this, you will need to grad the latest ROM update from either HTC's website, or your carrier's website. Put the device into bootloader mode by holding down the power button and pressing the tiny reset button under the battery cover with your stylus. Once it boots into the tri-colored screen (bootloader), you can then run the ROM update utility that you just downloaded. This will restore everything back to stock settings and you can try again. If you have already done Hard SPL, then it will NOT be overwritten, so don't worry.

Update
I cannot get into the tri-colored screen (bootloader).
How long do I need to hold in the reset and power button?
More than 1 min?

[email protected] said:
I cannot get into the tri-colored screen (bootloader).
How long do I need to hold in the reset and power button?
More than 1 min?
Click to expand...
Click to collapse
You can't get there, because you're doing it wrong. You need to hold down the volume down button and then press the reset button once. This gets you into the bootloader.

Update
Holding down the volume down button and then pressing the reset button once, did not work for me.
How long do I hold the volume down button for?

[email protected] said:
Holding down the volume down button and then pressing the reset button once, did not work for me.
How long do I hold the volume down button for?
Click to expand...
Click to collapse
Do you have power in the device? You need to have a battery in it. Also, the reset button might not power your device on. If your device doesn't turn on when you press the reset button, then just hold the volume down button and press the power button once instead. That ought to do it.

Soft brick, but can't access recovery mode

Hey there, so my phone randomly decided to stop working today.
Whenever I put the battery in the phone or plug in the charger, the Samsung screen loads then nothing. This all happens without me pushing the power button btw. Then the power button doesn't work, nor can I access recovery.
Like I mentioned, this all happened very suddenly and unexpectedly. I haven't flashed a rom in awhile so I'm not sure what caused the problem. One tidbit worth mentioning is that my phone would randomly reboot on the rom I've been using, but it wouldn't happen too often.
Any help would be greatly appreciated. Not exactly sure what I should do in this situation. Thanks for reading.

nfsplayer99 said:
Hey there, so my phone randomly decided to stop working today.
Whenever I put the battery in the phone or plug in the charger, the Samsung screen loads then nothing. This all happens without me pushing the power button btw. Then the power button doesn't work, nor can I access recovery.
Like I mentioned, this all happened very suddenly and unexpectedly. I haven't flashed a rom in awhile so I'm not sure what caused the problem. One tidbit worth mentioning is that my phone would randomly reboot on the rom I've been using, but it wouldn't happen too often.
Any help would be greatly appreciated. Not exactly sure what I should do in this situation. Thanks for reading.
Click to expand...
Click to collapse
try to be quicker to access recovery, power off the phone. then press the power, vol up, and home then AS SOON as you see the blue text on the left top side of the samsung logo screen let go of the buttons, it should boot into recovery then wipe data factory reset and reboot.

Andy_nu said:
try to be quicker to access recovery, power off the phone. then press the power, vol up, and home then AS SOON as you see the blue text on the left top side of the samsung logo screen let go of the buttons, it should boot into recovery then wipe data factory reset and reboot.
Click to expand...
Click to collapse
Yeah, I was able to do that once, but then the phone just goes to a black screen and doesn't load anything

nfsplayer99 said:
Yeah, I was able to do that once, but then the phone just goes to a black screen and doesn't load anything
Click to expand...
Click to collapse
flash this recovery attached with odin by booting into download mode via power vol down and home, wipe data factory reset and reboot
http://www.androidfilehost.com/?fid=9390212717148635222 (recovery)
http://www.androidfilehost.com/?fid=9390275921635705049 (odin)
place in pda with only f. reset time and auto reboot checked. it SHOULD only take about 10 seconds to flash. as soon as your phone reboots hold the recovery combo and it should go to it

I can't really access download mode either.
I'll get to the screen that asks if I want to go into download mode, then push the up on the volume rocker, get to the next screen, but then it goes black about a second later.
Thanks for all the help so far though.

nfsplayer99 said:
I can't really access download mode either.
I'll get to the screen that asks if I want to go into download mode, then push the up on the volume rocker, get to the next screen, but then it goes black about a second later.
Thanks for all the help so far though.
Click to expand...
Click to collapse
kinda odd. never had that happen before. ,maybe you could try to reflash the download mode into your phone using this method
http://forum.xda-developers.com/showthread.php?t=2369125(make sure you use a debrick.img http://d-h.st/iEy for att not sprint BTW)
or use a jig. since your phone can still access the boot interface.

nfsplayer99 said:
I can't really access download mode either.
I'll get to the screen that asks if I want to go into download mode, then push the up on the volume rocker, get to the next screen, but then it goes black about a second later.
Thanks for all the help so far though.
Click to expand...
Click to collapse
Have you done this and then connected the USB to see if ODIN will recognize the phone? it's entirely possible that you are getting into download mode, but just can't see it..
It's certainly worth a try.

Totally bricked [SOLVED]

OK guys so I got my xperia zl today, updated to 4.3 (.569), unlocked the boot loader, then tried flashing a CWM, now the phone is utterly and totally bricked, I tried the volume buttons + power button trick nothing, won't turn on at all, no fastboot, no flashmode, pc companion wont recognize it, the only thing I can get out of it is a single vibrate if I hold down the reset button at the back but even after that I get nothing, at all, the only thing that does anything is holding the reset button, any help would be greatly appreciated and if one of you magnificent people can get my phone working again I will send you money through paypal as a thank you,
[SOLVED] Check post 4

DracoManX69 said:
OK guys so I got my xperia zl today, updated to 4.3 (.569), unlocked the boot loader, then tried flashing a CWM, now the phone is utterly and totally bricked, I tried the volume buttons + power button trick nothing, won't turn on at all, no fastboot, no flashmode, pc companion wont recognize it, the only thing I can get out of it is a single vibrate if I hold down the reset button at the back but even after that I get nothing, at all, the only thing that does anything is holding the reset button, any help would be greatly appreciated and if one of you magnificent people can get my phone working again I will send you money through paypal as a thank you,
Click to expand...
Click to collapse
go to service centre they wont recognise if the phone has unlocked bootloader or not bcoz it doesnt start !so they will jst replace it tell them that u were updating it to 4.3 and afterwards it didnt boot.dont tell them u have unlocked bootloader or any WARRENTY RELATED STUFF.u will get a new one for free

DracoManX69 said:
OK guys so I got my xperia zl today, updated to 4.3 (.569), unlocked the boot loader, then tried flashing a CWM, now the phone is utterly and totally bricked, I tried the volume buttons + power button trick nothing, won't turn on at all, no fastboot, no flashmode, pc companion wont recognize it, the only thing I can get out of it is a single vibrate if I hold down the reset button at the back but even after that I get nothing, at all, the only thing that does anything is holding the reset button, any help would be greatly appreciated and if one of you magnificent people can get my phone working again I will send you money through paypal as a thank you,
Click to expand...
Click to collapse
This phone doesnt have any Volume +/- power button trick. It ONLY has the yellow reset button. Its a pain in the A*S!
Try a few things first.
1) When you hold down the yellow reset button, are you ONLY holding it down for a few seconds, and it vibrates ONCE?
Have you tried holding it down for 10 seconds, until it vibrates TWICE, indicating it has powered off completely, and THEN try connecting it?
2) If step 1 got your phone to power off completely try:
-Connecting your phone to your PC via USB with the volume DOWN button held and see if you get a GREEN L.E.D. If you do you have
successfully entered flash mode, in which case you can simply flash an FTF file with flashtool.
-Connecting your phone to your PC via USB with the volume UP button held and see if you get a BLUE L.E.D. If you do you have
successfully entered fastboot. From here, as long as you have ADB and your devices drivers installed on your computer, you can flash
a boot.img or "Kernel" with a fastboot command in a command window (fastboot flash boot boot.img). The easiest way to get a kernel or
boot.img with a baked in recovery is to download the latest Cyanogenmod, unzip and extract the boot.img, and flash it via fastboot.
Since you have an unlocked bootloader already, your device should be able to use an AOSP kernel.
From there you should be able to at least boot into recovery, and flash something from your SD card.
Id recommend just flashing the latest Cyanogenmod just to get your device up and running. From there you should be able to follow steps
get back to stock if thats what your looking for.
I hope at least one of these options work.
If not, like that last guy said, take it to a service center and get it checked out.
GOOOOD LUUUUCK!!

bhavstech said:
go to service centre they wont recognise that if the phone has unlocked bootloader bcoz it doesnt start !so they will jst replace it tell them that u were updating it to 4.3 and afterwards it didnt boot.dont tell them u have unlocked bootloader or any WARRENTY RELATED STUFF.u will get a new one for free
Click to expand...
Click to collapse
Yeah man that would've been my first guess at what to do if i didn't get it fixed but FUKKEN SOLVED YESSSSSSSSSSS, intially all i could get was a single buzz holding the reset button, but then (out of fustration) i decided to hold it past the first vibrate, then 3 vibrates happened in a row, next thing i know flashmode and fastboot mode working :laugh: :laugh: :laugh: :laugh: :good: :good: :good: :good: :victory: :victory: :victory:

DracoManX69 said:
Yeah man that would've been my first guess at what to do if i didn't get it fixed but FUKKEN SOLVED YESSSSSSSSSSS, intially all i could get was a single buzz holding the reset button, but then (out of fustration) i decided to hold it past the first vibrate, then 3 vibrates happened in a row, next thing i know flashmode and fastboot mode working :laugh: :laugh: :laugh: :laugh: :good: :good: :good: :good: :victory: :victory: :victory:
Click to expand...
Click to collapse
Read my reply

ATRIXXIRTA said:
Read my reply
Click to expand...
Click to collapse
haha yeah i had to hold my down for a bit longer idk why, and it vibrated 3 times, then i got it back into fastboot/flashmode and fixed it from there, but thanks anyway

DracoManX69 said:
haha yeah i had to hold my down for a bit longer idk why, and it vibrated 3 times, then i got it back into fastboot/flashmode and fixed it from there, but thanks anyway
Click to expand...
Click to collapse
All ZL's are like that. Hold down till 1 vibration for reboot. Hold down till 3 vibrations for power off. The yellow reset button will not power on the device however. I figured I'd check just incase my power button decided to go for a sh*t.
Sent from my C6503 using Tapatalk

NOOB: hard bricked op3, volume up button hasn't been working

First off, I did do a search, but as far as I can tell no one has had this problem so far.
This is all after modding using a tool kit: (i can't include the url but it is the toolkit by neisor on the oneplus forums)
tldr: phone stuck in bootloop, computer wont recognize the phone, maybe because it keeps shutting off and then booting to the 1+ logo, then shutting off again, would drivers help? what can I do about the volume up button?
So for a while my volume up button hasn't been working, and the mega unbrick post shows that I need to hold the volume up button for at least 25 seconds and while holding, plug my phone in. I have also seen some posts that say the volume up button could be a software issue, and the button itself could be working, and it is just not registering, as well as someone saying that you could take the back off and manually press the button, instead of using the bar on the outside of the phone (would this work?). I have gotten the button to work in the past by pressing the volume up button to the side instead of straight in, but I haven't been able to get it to work since my phone got bricked.
Another issue: my phone is stuck in a boot loop, I can't access fastboot, and I'm unsure of recovery because my volume up button is not working. would it be worth it to deal with the constant vibrating to try to get it to recovery?
I have been able to shut the phone off by holding the power button for something like a minute and a half, though.
This is my first post, and if I have broken any rules I am very sorry, but I need help and am tired of not having a phone.
Thank you everyone,
Mark
Edit: this is what I did to root the phone:
1. download the toolkit
2. unlock bootloader (when fastbooting the phone said unlocked at the bottom, and a message about not being secure showed every time I rebooted the phone)
3. flashed twrp (no issues, still booted, recovery went to twrp. for some reason I had to flash multiple times as every now and then recovery would revert to stock op, although I did make a backup through twrp)
4. send supersu zip file to phone, install using twrp (phone would not boot, op logo stayed on phone for 2 hrs + until I rebooted to fastboot and tried to reinstall the backup I made, still nothing)
5. Try magisk (still stuck on op logo)
6. try to go back to stock, accidentally lock bootloader (now the phone is stuck in bootloop, don't know what to do from here as I cant get to fastboot and am unsure of recovery's accessibility.)

If you are sure you have a broken volume button, you need to replace it first in order to get the phone fix.
Correction:
Fastboot/bootloader = Power+Vol Up
Recovery = Power+Vol Down

This happened to me except I didn't even get anything appear on the screen -- the phone just periodically vibrated with the screen not even light up. I tried the reset toolkit which is meant to flash your phone back to normal using Qualcomm drivers or something, but that didn't work either. Eventually I had to send it to OnePlus who fixed it for free in under a week! They said the motherboard had failed.
I hope you get this fixed!

Thanks
150208 said:
If you are sure you have a broken volume button, you need to replace it first in order to get the phone fix.
Correction:
Fastboot/bootloader = Power+Vol Up
Recovery = Power+Vol Down
Click to expand...
Click to collapse
thanks for the correction, I will keep trying the volume buttons, if it doesn't work by the end of today I will search for a new volume button.
Thanks again,
mark

Ouch
badabdba said:
This happened to me except I didn't even get anything appear on the screen -- the phone just periodically vibrated with the screen not even light up. I tried the reset toolkit which is meant to flash your phone back to normal using Qualcomm drivers or something, but that didn't work either. Eventually I had to send it to OnePlus who fixed it for free in under a week! They said the motherboard had failed.
I hope you get this fixed!
Click to expand...
Click to collapse
Damn, that sucks, and besides being unfixable (doubt it), this is my biggest fear. I'm in the US and really don't want to have to ship my phone to china to have it fixed. If you are in the US as well do you know if there is a OnePlus branch I can send it to in the US?
Thank you,
Mark

MarkTheFur said:
Damn, that sucks, and besides being unfixable (doubt it), this is my biggest fear. I'm in the US and really don't want to have to ship my phone to china to have it fixed. If you are in the US as well do you know if there is a OnePlus branch I can send it to in the US?
Thank you,
Mark
Click to expand...
Click to collapse
There seems to be one in Texas. Anyway, contact OnePlus and they may try to solve it over the air.
Apart from that, did you install the Qualcom drivers properly? Even with your faulty power button, try to hold it down for 40+ seconds (for the phone to switch off) and then immediately hold down the volume up button for 10 seconds and then plug in the phone to the PC. I know I am merely repeating the instructions of Naman Bhalla in his Mega Unbrick Guide but it is crucial to do them correctly especially the installation of the drivers. Try these steps repeatedly because for some people, the phone gets recognised after repeated attempts. Or else replace the power button and then try these steps.
I had to use the Guide last month and successfully resurrected my dead phone.

MarkTheFur said:
... what can I do about the volume up button?
Click to expand...
Click to collapse
Can you boot into recovery by pressing power+volume down buttons?

Update: Got phone to show on computer as qualcomm under coms and ports
So last night I went ahead and held volume up for about 20 seconds, then plugged the phone in, keeping the volume up button pressed the entire time. my phone stopped bootlooping and showed up as a qualcom device! So I have downloaded the new driver the stock os, and am going to proceed to try to unbrick my phone.
Wish me luck,
Mark

Yes, I did, and its working so far
tnsmani said:
There seems to be one in Texas. Anyway, contact OnePlus and they may try to solve it over the air.
Apart from that, did you install the Qualcom drivers properly? Even with your faulty power button, try to hold it down for 40+ seconds (for the phone to switch off) and then immediately hold down the volume up button for 10 seconds and then plug in the phone to the PC. I know I am merely repeating the instructions of Naman Bhalla in his Mega Unbrick Guide but it is crucial to do them correctly especially the installation of the drivers. Try these steps repeatedly because for some people, the phone gets recognised after repeated attempts. Or else replace the power button and then try these steps.
I had to use the Guide last month and successfully resurrected my dead phone.
Click to expand...
Click to collapse
I still need to turn off the signed drivers features ( a huge bi*ch, I have to use another computer to contact microsoft or something to get my computer to load when I turn off safe boot or whatever its called), but once I do that I can install the driver and attempt to reinstall the stock os. Hopefully everything will go well.
Thank you,
Mark

Not as far as I know
rk2612 said:
Can you boot into recovery by pressing power+volume down buttons?
Click to expand...
Click to collapse
So far recovery has not been loading, just the bootloop, but I have gotten the phone to power off by pressing the power button for 40 seconds, and the volume up button plus plugging in does make the phone register as qualcom 9008 or something like that. Basically everything is going well so far, and the faulty vol button seems to have been a software bug, as it does work when plugging it in. I will try to get to fast boot, but it did not work last time.
Thank you,
Mark

MarkTheFur said:
So far recovery has not been loading, just the bootloop, but I have gotten the phone to power off by pressing the power button for 40 seconds, and the volume up button plus plugging in does make the phone register as qualcom 9008 or something like that. Basically everything is going well so far, and the faulty vol button seems to have been a software bug, as it does work when plugging it in. I will try to get to fast boot, but it did not work last time.
Thank you,
Mark
Click to expand...
Click to collapse
Glad to hear that there is some progress. Best of luck and keep us informed.