Develop Bugs

SD card corrupted

I have been using a 2GB SanDisk card for about a year with my XDA2i without problems. Until last week when it seems all the data on the card has become corrupt (see attached file). The data looks the same whether the card is read on the XDA or on a card reader. Any way it can be salvaged?

So, no suggestions from anyone. Great stuff...

I have the same problem m8 did u fix it in the end?Mine reads in my magician but not in a pc or my friends phone that i borrowed to do the big storage hack!Also any ideas on how to un write protect an mmc card?
Thanks

write protect? thers a sliding switch at the side of the card to make it write protect.. Is that the one..?

Are you guys using SPB pocket plus & monitoring the SD card as well, with storage card indicator? SD's sometimes are corrupted when proocesses are accessing it @ the sime time.
M

Just a suggestion...but you could try running some data recovery software on the card (such as "don't panic" - many others out there) to see if it will recover the data.
I would also bug it in your pc and run a scan disk on the card, and check "fix error"
It's worth a try, hope this helps

8GB MicroSDHC Card

Hi -
I purchased the 8GB MicroSDHC card from Verizon a week ago. It worked fine on my AT&T Tilt for a few days and than it lost all information! Fortunately, I was able to restore from backup, and it seems to be OK again. Here's the strange part: even though the original files and directories are gone, the card still counts them in used memory. I.e., the used memory is about 200 MB more than it should be, the amount of space I was using before the card crashed. This applies whether I check the memory on the device, connected by USB, or with the Card Adapter that came with the card.
Any ideas what might be causing this and how to recover the used memory short of reformatting the card?
Thanks!

If you could tell us what you did for it to crash it would help
You probably tried to partition it or something...?
Looks like you will have to format the whole card.
Maybe there is a simple way to do this but here is how i would do, if it helps :
- install WM5Storage on your PDA main memory
- start wm5storage with the option memory card and connect your PDA to your PC
Activsync then wont be sync'ing and your memory card will be seen from your PC as an USB-key. Open it on your PC and check to make sure it is your memory card that you see (and not your PDA main memory).
Then use whatever format tool to format your "USB key" with FAT like format, for example you can use HPtool (be carefull to format the key and not another drive !!!).
After this do not forget to turn off wm5storage, otherwise you will not be able to "see" the memory card on PDA side...
Hope it helps, let us know...

by the way maybe you could try this :
http://www.cgsecurity.org/wiki/TestDisk
I've used it sometimes when i had started to format a hard drive instead of an usb key by mistake.
Windows was asking for formating everytime i wanted to open the hard drive folder. However, using this Testdisk tool, i was able to mount the hard drive and recover everything including my photos and music and stuff... Maybe you want to try this awesome tool, plus it is free and OpenSource.
Use wm5storage tool to use your PDA as an usb-key, then use Testdisk on this usb-drive, it might be able to see, list and recover all the "lost" files and heal the whole partition at same time.

Thanks for the suggestions - I'll post again when I have the chance to try them -

No luck
Had a similar problem with my Kaiser (HTC Rom). Yesterday I did something (don't know if it was memmaid - my guess, because otherwise I just installed some cabs I had previously installed in my Wizard with no problem) and my SanDisk 6 GB MicroSD was completely 'erased".
I just noticed after the Kaiser had created new folders over it (Application Data, Cookies, History and Temporary Intenet Folders). My assumption is that something destroyed my partition table (that's why I suspect memmaid, it may have cleaned something wrong) and now I have another partition over the old one.
I tried file recovery and found 1 GB good of files, but there were 5 Gigs on the card... I really wanted to find "program files" so I didn't have to re-install lots of stuff, but no luck.
Tried Testdisk as suggested above, but it never detects any partition, not even the current one. I guess I will have to reformat it and re-do all stuff.
Well, I may be saying lots of dumb stuff, but that's my guess.
Thanks if there is any possible help in this...

Ah, and when I insert the card via a card reader in my notebook and right click properties, it says 717MB free, which means my old files are there waiting for me (new folders have only 736KB of data)... What to do?

Guys need advise do you have to do any patch to be able to use 4-8GB mini SDHC card on your PDA?
I have a Asus P535. Have asked their support site and the reply I got is the max supported is only 4GB.

I believe I've read in more than one place that the Kaiser may support up to 32 Gig, which is the MicroSD maximum. But I may be wrong...
Fact is this has never happened with my Wizard and its 1 Gig MiniSD. Now I'm gonna increase backup and cloning so I don't have to reinstall everything...
But I'll check if there is a patch anyway. Thanks.

I am able to use Sandisk microSDHC 8GB can on Asus P535.
But need a micro adapter to miniSD

mbernstein said:
Ah, and when I insert the card via a card reader in my notebook and right click properties, it says 717MB free, which means my old files are there waiting for me (new folders have only 736KB of data)... What to do?
Click to expand...
Click to collapse
Click properties and then click theTools tab. Run Error-checking with both options checked. When you check your card, you will hopefully see a new directory with recovered files. You can then delete them and regain your disk space. This is what worked for me -

Thanks. I tried that at the time to no avail. I did have to reformat, and then reinstall everything... Now I'm using Sprite Backup, so everything including Storage Card is backed up in case this thing happens again.
And/Or said:
Click properties and then click theTools tab. Run Error-checking with both options checked. When you check your card, you will hopefully see a new directory with recovered files. You can then delete them and regain your disk space. This is what worked for me -
Click to expand...
Click to collapse

It could be WINXP patch
I have the Sandisk 8G , it came with a small USB reader and all was working fine. However my ASUS W5 laptop also has a built-in SD slot so I installed a patch issued by Microsoft to make it HCSD compatible, and it read and write it OK but then I suddenly got the same problem that you've described here.
The disk goes blank but the files still occupy the space, even attempting to reformat the card in the built-in slot will ignore that space,i.e it shows only 5G card.
But reformatting using the small USB card reader was fine and from now on I only use the cardreader to read and write and everything is OK. In my view the XP patch was causing that problem

SanDisk 2GB Memory Card Problem

I was using it pretty good and suddenly my memory card appear and disappear when ever i reset my ppc. Now, i cant detect it anymore on my dopod 838 pro. Any idea or comments i can do to verify that the memory card is the problem (if it is still alive?) really need some advise and thanks in advance!

gerald20000 said:
I was using it pretty good and suddenly my memory card appear and disappear when ever i reset my ppc. Now, i cant detect it anymore on my dopod 838 pro. Any idea or comments i can do to verify that the memory card is the problem (if it is still alive?) really need some advise and thanks in advance!
Click to expand...
Click to collapse
Pull the card out and pop it in a Normal PC Card reader and see if you can see the contents. For some reason PPC's will occasionally corrupt the formatting of the card to majke it unreadable to it but PC's sometimes can. If you can read it with a PC, then copy the contents off, reformat usign the PC and copy the contents back and try it in the PPC again.

ok will do that. but isnt that dangerous to lose data tat way? also, when i could read the memory card, the folders r there but the files r gone. possible virus?

i can find my memory card on the card reader. i tried formatting it but it gave me an error "Window is unable to complete the format". What is wrong?

Were you able to copy your info off of the card? How were you trying to format it?
Make sure that you DON'T have a window to the card open when trying to format.

HELP ME WITH ADVISE!
My problem is back again. My data at certain folder in the memory card is disappeared but still able to browse the memory card. Then i soft-reset a couple of times and the data comes back. It took the dopod 838 pro to read the memory card very long time b4 able to show the data on the card.
What should i do?

Check the registry key HKEY_LOCAL_MACHINE\System\StorageManager. There are two DWORD values - PNPUnloadDelay and PNPWaitIODelay. If they are not set to 8196 - do that.

its 8196 as posted...

Looks to me like 2 possibilities:
Your SD Card is shot; or
Your phone has lost the plot.
If it reads OK on the PC card reader, the card is probably OK.
I'd try a hard reset of the phone first. (Make sure you have backed up everything first.)
Also, clean the SD slot as best you can to make sure there are no biscuit crumbs or old socks fallen into the hole.

gerald20000 said:
i can find my memory card on the card reader. i tried formatting it but it gave me an error "Window is unable to complete the format". What is wrong?
Click to expand...
Click to collapse
Seems like some problems with this card. You didn't try another one?

Strange SD card Problem

I have been using Touch 4.02 with an 8gb card for ages now with no troubles then yesterday the storage card is no longer recognised by the phone? I tried the usual soft reset, taking the card out wiping it put it back in still no joy.
Reinstalled the sdhc cab file didnt work, Have just re-flashed with the new diamond look a like rom and still it aint recognising the card.
Has anyone got any ideas??

mikehulme1983 said:
I have been using Touch 4.02 with an 8gb card for ages now with no troubles then yesterday the storage card is no longer recognised by the phone? I tried the usual soft reset, taking the card out wiping it put it back in still no joy.
Reinstalled the sdhc cab file didnt work, Have just re-flashed with the new diamond look a like rom and still it aint recognising the card.
Has anyone got any ideas??
Click to expand...
Click to collapse
Probably your card is broken....
Try to insert it in a card reader and see if it recognizes the card....

Yeh will have to wait till I get home not sure my memory card supports SDHC though?

I have a similar problem, and like you I've been happily using an 8gb card for a while, but in the last week it has stopped working correctly.
Occasionally it is fine, but most of the time access to the card is either very slow or it doesn't appear at all.
I've tried the following but with no success:
- Using another MicroSD card (2gb)
- Reading the cards in a card reader and they are fine
- Reinstalling Artemis Touch 4.02 WM6.1
- Formatting the card (FAT32)
- Shimming the MicroSD card with bits of cardboard as I've read there can be a loose fit
- Cleaning the contacts on the card reader
- Pulling the contact pins out a bit to get a better fit
Does anyone have any ideas of anything else to try?

Does WM5torage work?

I did the followings to make my 4GB Micro SD usable by my Artemis:
1-flashed it to FAT32 in my laptop (I Had to format my laptop partition D of my HDD to FAT32 to make the microSD recognizable by my NTFS system).
2-copied the "system folder" from my older 512 MGB card as it is (hidden) to the root of my 4GB
3-The 4GB is readable by my artemis by now.
4-To make sure the crad will be working good in the future, I installed the "Flashcard" Cab in my Artemis and reflashed the card to FAT32, 512 Bytes 4KB clusters.
The card is just fine under Artemis windows, but I gatta take it out when flashing any new ROMs or Radio.
Hope that'd help you.

uniqueboy said:
Does WM5torage work?
Click to expand...
Click to collapse
No - WM5torage behaves the same ... i.e. occasionally works (if the phone can see the card), but most of the time it just reports an error

It is deffothe memory card just put my old 2gb back in the phone and it worked, I have tried the 8gb in my PC card reader and in y camcorder that takes sdhc and neither recognised it.
This explains why my phone started goin so slow it would take ages to do anything then the memory card was unrecognised a few days later.
Im guessing there is no way to repair these?

If you can't read it, you can't do anything...
R.I.P.... :|
Cheers

Gutted oh well

not as gutted as i am ... looks like i'll have to buy a new phone!

Just try to format it by these criteria
FAT32, 512 Bytes 4KB clusters
then let us know.

dude dont panic try to recover the card first before you format it. i am sure there are some imp data there eh?
use a disk recovery utility on ur pc
my best choice is Recover My Files http://www.recovermyfiles.com/
if you are using windows os also try to run scan disk
use pocket mechanic then on ur ppc
let us know how well u do

Sorry for posting...Wrong thread...

[Q] best way to change your SD card ?

Hi guys,
I have a 32g class 10 sd card I bought to use instead of my 16gb class 2 but I have been facing quite some issues in the last couple of weeks
I took the 32g, put it in my win7 PC, formatted it to FAT32, safely removed it and now the arc doesnt recognize it... I just wanted to format it via the settings-> storage -> erase card in order to make sure everything is all peaches and cream before loading 20+gig of music in it.
...
All I want to do is finally transfer all my music (24ish gig) to the new 32g , and back up all my apps and stuff via Titanium Back Up pro.
Simply said, I want to have my 16g card data in my 32g one , with all my beat
Please could someone share some tips or links, I'll do homeworks and have been, but I have been facing so many complications since the last few weeks
Thanks in advance

Does your phone recognize another card properly?
Did you apply a volume name when formatting the 32GB card?
Did you try the 32GB card in the phone before formatting it?
I've done pretty much the same as you with a 32GB card (Kingston Class 4) and had no problem.
Are you sure the 32GB card is good and not a counterfeit?
Try formatting it again to with FAT32, default parameters, short or no volume name. Try copying your files to the card on the PC to see if it actual works.

robsaw said:
Does your phone recognize another card properly?
Did you apply a volume name when formatting the 32GB card?
Did you try the 32GB card in the phone before formatting it?
I've done pretty much the same as you with a 32GB card (Kingston Class 4) and had no problem.
Are you sure the 32GB card is good and not a counterfeit?
Try formatting it again to with FAT32, default parameters, short or no volume name. Try copying your files to the card on the PC to see if it actual works.
Click to expand...
Click to collapse
Thanks I did put a volume name. That might explain it.
Yes the card already worked ( plenty of times ). I have been trying numerous time to transfert the music ( takes forever to transfer 20gig to an SD card , even class 10... ), and had mixed results that always ended up failing ( most of the times because of me... like forgeting to safely remove the sd card from my laptop made the card unrecognizable by the phone afterward...of course I just finished to tranfers the 20gig and was too happy to safely remove it... )
I will try that right now. thanks again
*EDIT*
Bah still same problem I must be doing stupid... SD card is not recognized by the phone. In the settings menu ( storage ) I cannot mount or unmount it and thus format it via the phone itself
That even after reformating it to default FAT32 partition with no volume name using MiniTool Partition Wizard Home
So number 1 priority is getting the SD card to be recognized again by the phone
**EDIT2**
When browsing the card with astro it says problem creating external cache , with root explorer it only says directory is empty. Still can't do anything in the settings menu

Obvious statement, but did you set it to primary?
sinkster©

What brand? I have a transcend card, and its not reconized by anything at all..
Sent from my GT-I9100 using xda premium

sinkster said:
Obvious statement, but did you set it to primary?
sinkster©
Click to expand...
Click to collapse
Hmm it is being formated by the default win7 tool at the moment non quick format tho so it takes some times and I can't look for sure.
bruflot said:
What brand? I have a transcend card, and its not reconized by anything at all..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
It's a memorette class 10 :S

Or format it wrong, Arc will say it's damaged and say that it has to format it to detect it.
Should fix it, too.
Sent from my iPad 2 using Tapatalk

Flo95 said:
Or format it wrong, Arc will say it's damaged and say that it has to format it to detect it.
Should fix it, too.
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
Ya I'd love to get to this point ( which I got in the past hehe ) but at the moment it's still not even recognizing the sd card anymore
still formating btw....

How did you recover your issue?
I think I have a similar SD card problem. But, I encountered it after I did factory reset with SD card erase option selected. I didn't do anything after all. When I connect to PC, on the phone upper bar, there is no notification regarding USB. The middle button seems not working either.

Try formatting the card with this Panasonic SD/SDHC/SDXC Memory Card formatter.

That's strange why not just do a quick format in Win7 or WinXP, to FAT32? I use a 32GB as well and Arc has no issue with it. Coming from the 8GB, here's what I did.
1. Take off the 8GB from the Arc and placed in a USB reader.
2. Copy off all the files to your PC. I used WinRAR to accomplish this, just archive everything and STORE it (no need to compress so operation is faster). Or you can just use drag and drop plain copying its all the same.
3. Analyze the copied files and remove all unneeded bloats (ie. old movies u don't intend to watch anymore, clear out useless temp files, etc)
4. Copy back the files on your new FAT32 formatted card using the USB reader, then put in your Arc.
If you notice, the entire data migration is done via card reader/USB. Using the Arc as such will slowdown your progress and introduces unnecessary delays.

You can also use usb tool, it basicaly creates a back up image and can be restored to the new sd
Sent from my LT15i using Tapatalk