SD card corrupted - General Accessories

I have been using a 2GB SanDisk card for about a year with my XDA2i without problems. Until last week when it seems all the data on the card has become corrupt (see attached file). The data looks the same whether the card is read on the XDA or on a card reader. Any way it can be salvaged?

So, no suggestions from anyone. Great stuff...

I have the same problem m8 did u fix it in the end?Mine reads in my magician but not in a pc or my friends phone that i borrowed to do the big storage hack!Also any ideas on how to un write protect an mmc card?
Thanks

write protect? thers a sliding switch at the side of the card to make it write protect.. Is that the one..?

Are you guys using SPB pocket plus & monitoring the SD card as well, with storage card indicator? SD's sometimes are corrupted when proocesses are accessing it @ the sime time.
M

Just a suggestion...but you could try running some data recovery software on the card (such as "don't panic" - many others out there) to see if it will recover the data.
I would also bug it in your pc and run a scan disk on the card, and check "fix error"
It's worth a try, hope this helps

Related

microSD card corrupted...

I decided to replace the 512 MB card in my Cingular 8525 with a 2 GB card. When I put the 512 card in its adaptor, the PC read the directory, showed a FAT format, but would not copy/read/or otherwise manipulate any of the files. I plugged the card back into the 8525 and found that it couldn't even see it. Giving up on any kind of file recovery, I tried to reformat it in the PC, but then IT couldn't detect the card! After I played with it awhile, I finally got it to start the format process, but it always failed just before the "green line got to the end" and, after several attempts, it reported "disk cannot be formatted."
Is there any way I can save this card, or is it a (VERY small) boat anchor?
I've seen yesterday in the Sandisk site and somebody told me that they have some kind of software tool (file recover, unformat, etc.), that's very capable, unfortunately it is not free, there's a trial version (does not allow to save any files). Sofware's name is "Rescue Pro", if you can get yourself a copy you might give it a try.
Another thing about an SD (in my experience), I'm talking about a Verbatim 512MB SD, i borrow it to a friend, when he was giving it back, just cancelled all his things up, stopped the card reader (from XP), extracted the SD and it was dead, fortunately I had kept my proof of purchase and they (Verbatim) exchanged it with a new one (in europe the warranty is at least 2 year long), they asked me to send it to Ireland to check if it could be recovered and within three weeks (just because there was christmas in the middle) I got a new one back.
hope this helps
Try putting it in a Digital Camera with SD Slot (put in SD Adapter first;-))
Then format it via your Digital Camera
Or
Download VaioSoft Recovery Manager and try to format with that one
http://vaiosoft.com/products/recoverymanager.htm
Eelcol
that link is not working please post another link for that software
What PQI support suggests
I´ve had trouble with PQI miniSD cards, so I asked support from PQI on corrupted files, this is their answer in order to check if the card is damaged or not and includes several tips on using memory cards, it´s alittle bit long to read, but maybe it worths, so here it goes:
Some hints of using flash memory cards
1. Do NOT remove the memory card while it is operating, otherwise it may be
damaged.
2. Do NOT turn off the device, while the operation of writing /reading is
not completed.
3. When the battery power of system is low, do not write to the memory card to prevent loss of data.
4. Make sure the device (card reader/phone/camera/pda/camcorder) has finished reading/writing to the card before you take another shot/turn it off or the data will be corrupt/lost and the card will be damaged. You can tell by the device indicator light where it flashes when it is reading and writing to the card. Wait until the indicator light is off and stops flashing before you take another shot/turn the device off or remove the card/drive.
Before you continue, please make sure you have a reader that can read and write to 2GB card properly. DO NOT use in built-in reader on laptop and desktop, or old readers made 2 years or longer ago, because these readers can only use up to 1GB card. I recommend using it in external USB 2.0 reader that is made within 1 year ago.
If you do not have such reader, then connect the device (gps/camera/pda/camcorder) to the computer with USB cable and the card inserted and if works you should see new drive letters show up under My Computer.
Otherwise, if used in devices that do not support the 2GB card, the card will be damaged.
Please try the following troubleshooting guide first and see if it can solve the problem. Try one step at a time. If one works, then you can stop trying. You don't need to try all of them.
The following guide will erase all the data on the drive/card. So make sure you backup your data first before you try the steps below:
1. First, remove the card/drive from your computer.
Download the low level format tool below to your computer.
http://hddguru.com/download/software/HDDGURU-Low-Level-Format-Tool/LLFsetup.2.36.1181.exe
Install the program into your computer.
You should see a new icon called "Hard Disk Low Level Format Tool".
a. Insert the card/drive and run the program.
IMPORTANT!!! MAKE SURE YOU SELECT THE CORRECT DISK OR YOUR COMPUTER MAY NOT START LATER!!!
It should shows as BUS: USB. Select the BUS: USB. Also check the size and make sure.
If you don't see BUS: USB, that means the card is unreadable and need to be replaced. In this case, please STOP here and close the program and DO NOT continue below.
b. Then click Continue->Low Level Format->Format this Device.
c. Wait for a few minutes until it finish successfully with a message of asking you to partition and format it. (if you see formatting error, you can stop the formatting and the card needs to be replaced.)
d. Flash Card:
Put the card back to your device (camera/phone/pda/camcorder) and then use the format utility in the device to format the card.
Please let me know your test results. Thanks.
Reference: Program homepage
http://hddguru.com/content/en/software/2006.04.12-HDD-Low-Level-Format-Tool/
2. Please go to the site below:
http://www.sdcard.org/Downloads.aspx
Please try to download the software sdfv2000.exe (for windows only) and the manual for your reference.
Install the sdfv2000.exe in your computer, then insert the card into the card reader (if you do not have reader, you can try to connect your device to the computer with USB cable) and then run it:
a. Check the drive letter and also the size and make sure it is the correct card.
b. Click Option:
Format Type: Full Erase ON
Format Size Adjustment: ON
c. Click OK, then click Format. Wait until it finish.
d. You will be prompted to remove the card after it finish. Then go ahead and insert it in your (camera/pda/camcorder etc) and see.
16. T-mobile MDA (cannot format 2GB mini SD card)
Please install the software below to your phone (you can download the free trial):
http://www.pdatopsoft.com/PocketPC/StorageTools---Analyze,-Defragment,-Verify,-Repair-and-Format
Then use the Storage Tools software above to format the card and see.
does this method also apply on mini sd and mmc rs dv cards?????
Actually this was given for miniSD´s
Awais said:
does this method also apply on mini sd and mmc rs dv cards?????
Click to expand...
Click to collapse
I assume that this applies to all types of SD cards, I don´t know about the others.
Awais said:
that link is not working please post another link for that software
Click to expand...
Click to collapse
http://vaiosoft.com
goto recovery manager
Eelco
luiggi said:
I assume that this applies to all types of SD cards, I don´t know about the others.
Click to expand...
Click to collapse
is there any technical differnece between mmc and sd cards???/
cuz we can also use mmc or rs dv cards in htc devices but sd card is not useable for nokia and other mmc supported sets
Thanks for all of the input! I tried formating it with my camera with no success, then took the easy way out: I took it back where I bought it and got it replaced.
I'm filing this information away for next time, though! Thanks again.
Awais said:
is there any technical differnece between mmc and sd cards???/
cuz we can also use mmc or rs dv cards in htc devices but sd card is not useable for nokia and other mmc supported sets
Click to expand...
Click to collapse
SD cards where made to improve the lack of speed of MMC cards, also they include the writing protection/lock, it is the small switch you see in one side of the SD.
Also, SD cards are slightly different from MMCs phisically, SDs are thicker than MMCs (that's why you cannot put them in a Nokia phone), the electrical specs should by backwards compatible (aside from phisycal differences).
Recently some updatings/improvements have been done to MMC specs, they claim to be the fastest memory card technology available, there are MMC plus, etc.
I know all these things that I read recently (I just can't remember where).
hope this info can be used, and one last thing is that information on this subject can be found easily on the net, it's juest a matter of look for it, personally I like a lot an electronics web site: www.epanorama.net
thanks for the useful info and that link too
hmm today i got a miniSD topram, 2gb and it worked fine it was fat format i believe so i went to the winxp format utility and formated with fat32 16k everything seemed to work fine then i put it in the pda phone and nothing it did not see it, so then i put it back in the PC to format back to fat and nothing it does not see the card now at all
what happend i have been trying a million apps to some how force a format but none have worked, windows pretty much hangs while trying to read the card and at end says there is no media there, so do other apps
Low level format
losborn said:
I'm filing this information away for next time, though! Thanks again.
Click to expand...
Click to collapse
Low level format tool once done good job for me
http://www.killdisk.com/
I would proberbly say its fubarred, but you could try using software like SCAN DISK and carios other things.
Memory card fixes
Guys
We've seen this issue quite a bit lately.. Memory card simply locks up Windows when inserted.. It seems to be related to a flakey FAT table on the card. Formatting does nothing... Disk manager can't deal with it either..
The solution we found that worked was to use Paragon Partition Tools to remove the partition table on the card.. Recreate it.. then reformat..
Unless the card is physically cactus, it works every time..
Good luck!
Andy
www.pressdigital.com.au
Press Digital Support Team
???
any link for a free-ware partitioning tool !!!
wanna know more about erasing and recreating partition table on micro-sd cards
http://hddguru.com/download/software....2.36.1181.exe
Thank you, Luigi.
This work perfectly. My microSD 2GB was formated a 1GB and with this program now is all OK. I have microSD a 2GB again.
memory card recovery
This tool can help you to recover your files from damaged media.
www softorbits com/flash-drive-recovery
This device cannot be accessed because it is smaller than 65535 sectors.
:crying: It says "This device cannot be accessed because it is smaller than 65535 sectors" when I tried to low level format using LLFT.
---------- Post added at 07:31 PM ---------- Previous post was at 07:08 PM ----------
losborn said:
Thanks for all of the input! I tried formating it with my camera with no success, then took the easy way out: I took it back where I bought it and got it replaced.
I'm filing this information away for next time, though! Thanks again.
Click to expand...
Click to collapse
Good for you. But I'm still getting headache as I can't contact the manufacturer.
I had formatted the micro SD card in ext4 format for using with app2SD. I had it in 2 partitions.
And then after a while, the card stopped functioning (with so little and useless 30MB storage).
I had tried things like recovery, formatting, partition recovery.
Nothing can return it to original state. I just want it to be blank. It's ok I lost all the data.

SanDisk 2GB Memory Card Problem

I was using it pretty good and suddenly my memory card appear and disappear when ever i reset my ppc. Now, i cant detect it anymore on my dopod 838 pro. Any idea or comments i can do to verify that the memory card is the problem (if it is still alive?) really need some advise and thanks in advance!
gerald20000 said:
I was using it pretty good and suddenly my memory card appear and disappear when ever i reset my ppc. Now, i cant detect it anymore on my dopod 838 pro. Any idea or comments i can do to verify that the memory card is the problem (if it is still alive?) really need some advise and thanks in advance!
Click to expand...
Click to collapse
Pull the card out and pop it in a Normal PC Card reader and see if you can see the contents. For some reason PPC's will occasionally corrupt the formatting of the card to majke it unreadable to it but PC's sometimes can. If you can read it with a PC, then copy the contents off, reformat usign the PC and copy the contents back and try it in the PPC again.
ok will do that. but isnt that dangerous to lose data tat way? also, when i could read the memory card, the folders r there but the files r gone. possible virus?
i can find my memory card on the card reader. i tried formatting it but it gave me an error "Window is unable to complete the format". What is wrong?
Were you able to copy your info off of the card? How were you trying to format it?
Make sure that you DON'T have a window to the card open when trying to format.
HELP ME WITH ADVISE!
My problem is back again. My data at certain folder in the memory card is disappeared but still able to browse the memory card. Then i soft-reset a couple of times and the data comes back. It took the dopod 838 pro to read the memory card very long time b4 able to show the data on the card.
What should i do?
Check the registry key HKEY_LOCAL_MACHINE\System\StorageManager. There are two DWORD values - PNPUnloadDelay and PNPWaitIODelay. If they are not set to 8196 - do that.
its 8196 as posted...
Looks to me like 2 possibilities:
Your SD Card is shot; or
Your phone has lost the plot.
If it reads OK on the PC card reader, the card is probably OK.
I'd try a hard reset of the phone first. (Make sure you have backed up everything first.)
Also, clean the SD slot as best you can to make sure there are no biscuit crumbs or old socks fallen into the hole.
gerald20000 said:
i can find my memory card on the card reader. i tried formatting it but it gave me an error "Window is unable to complete the format". What is wrong?
Click to expand...
Click to collapse
Seems like some problems with this card. You didn't try another one?

Strange SD card Problem

I have been using Touch 4.02 with an 8gb card for ages now with no troubles then yesterday the storage card is no longer recognised by the phone? I tried the usual soft reset, taking the card out wiping it put it back in still no joy.
Reinstalled the sdhc cab file didnt work, Have just re-flashed with the new diamond look a like rom and still it aint recognising the card.
Has anyone got any ideas??
mikehulme1983 said:
I have been using Touch 4.02 with an 8gb card for ages now with no troubles then yesterday the storage card is no longer recognised by the phone? I tried the usual soft reset, taking the card out wiping it put it back in still no joy.
Reinstalled the sdhc cab file didnt work, Have just re-flashed with the new diamond look a like rom and still it aint recognising the card.
Has anyone got any ideas??
Click to expand...
Click to collapse
Probably your card is broken....
Try to insert it in a card reader and see if it recognizes the card....
Yeh will have to wait till I get home not sure my memory card supports SDHC though?
I have a similar problem, and like you I've been happily using an 8gb card for a while, but in the last week it has stopped working correctly.
Occasionally it is fine, but most of the time access to the card is either very slow or it doesn't appear at all.
I've tried the following but with no success:
- Using another MicroSD card (2gb)
- Reading the cards in a card reader and they are fine
- Reinstalling Artemis Touch 4.02 WM6.1
- Formatting the card (FAT32)
- Shimming the MicroSD card with bits of cardboard as I've read there can be a loose fit
- Cleaning the contacts on the card reader
- Pulling the contact pins out a bit to get a better fit
Does anyone have any ideas of anything else to try?
Does WM5torage work?
I did the followings to make my 4GB Micro SD usable by my Artemis:
1-flashed it to FAT32 in my laptop (I Had to format my laptop partition D of my HDD to FAT32 to make the microSD recognizable by my NTFS system).
2-copied the "system folder" from my older 512 MGB card as it is (hidden) to the root of my 4GB
3-The 4GB is readable by my artemis by now.
4-To make sure the crad will be working good in the future, I installed the "Flashcard" Cab in my Artemis and reflashed the card to FAT32, 512 Bytes 4KB clusters.
The card is just fine under Artemis windows, but I gatta take it out when flashing any new ROMs or Radio.
Hope that'd help you.
uniqueboy said:
Does WM5torage work?
Click to expand...
Click to collapse
No - WM5torage behaves the same ... i.e. occasionally works (if the phone can see the card), but most of the time it just reports an error
It is deffothe memory card just put my old 2gb back in the phone and it worked, I have tried the 8gb in my PC card reader and in y camcorder that takes sdhc and neither recognised it.
This explains why my phone started goin so slow it would take ages to do anything then the memory card was unrecognised a few days later.
Im guessing there is no way to repair these?
If you can't read it, you can't do anything...
R.I.P.... :|
Cheers
Gutted oh well
not as gutted as i am ... looks like i'll have to buy a new phone!
Just try to format it by these criteria
FAT32, 512 Bytes 4KB clusters
then let us know.
dude dont panic try to recover the card first before you format it. i am sure there are some imp data there eh?
use a disk recovery utility on ur pc
my best choice is Recover My Files http://www.recovermyfiles.com/
if you are using windows os also try to run scan disk
use pocket mechanic then on ur ppc
let us know how well u do
Sorry for posting...Wrong thread...

Storage Card Issues ...

hello everyone!
since i bought a microSDHC storage card (4GB class 6) for my hermes, i am having problems with accessing the files i store on it....
i usually format the card in the device (using StorageTools or using WM5Storage in WindowsXP) and afterwards copy various files and folders on the card. when at first, everything seems tow ork great, after some time i am having troubles accessing the files. when trying to access the storage card with TOTAL COMANDER for example, i get following error:
"Error 13 changing to dir"
after reseting the device or ejecting and inserting the storage card again, it seems to work again...
is anyone familiar with such kind of problem?
is my storage card broken?
regards,krz
Hum!
I think you should first repair your disk with CHKDSK on Windows.
Try it and report.
Cheers
thank you komanguy!
i should have added, that i already did that too.
CHKDSK did report couple of errors (sorry, i forgot which) and fixed it.
after that, i formated.
everything seemed ok, and the out of a sudden... problems again!
i will try some more things and will report back.
if anyone else got a hint, i would be grateful!
regards.krz
Maybe SDHC drivers are not proper on your device? Try partitioning your SD card.
Regards,
Carty..
card readers ....
another thing, that really pisses me off is, that SD card readers dont seem to be able to read from those cards... i tried it with the adapter from micro to normal size SD card, no succeys at all. friend of mine having the same problems....
so the only way to read/write that microSDHC is via the pda! and this is superslow!! i really wonder, why i got myself a class 6 microSDHC....?
anyone knows a cardreader, that REALLY works (fast) with microSDHC cards?
thx.krz
not all card readers support the high capacity cards.. need to find you one that does.. I bought a 1gb A-Date microSD a while back that came with a tiny USB adapter that works flawlessly with my current 8gb card.. its nice having the adapter on my keychain whenver I need to dump files to and from it. back to the problem at hand.. the contacts might be dirty.. I would blow some compressed air in it and try that then if that didn't work find some stiff paper, cut it to the microSD width.. saturate it with 90% alcohol but not dripping and run it in and out of the slot a few times.. hope this helps

[Q] [Q!!!!] Memory Card In Unknown State Wont Format and Boiling Hot When Removed??

right, was just about to swap all my stuff over to a 16gb Sandisk micro sd card i got the other day. i moved all my stuff from my 8gb to my computer to then move on to the 16gb i placed in my phone.
But as soon as the 16gb into my DHD it flashed on the phone "memory card in unknown state" "please format card" i click format n nothing happens. i then remove the card and its ROASTING HOT. god knows what the problem is but i tried this a couple of times with the same ****ed up conclusion. anyone be able to shed some light on this issue was really looking foward to the 16gb'ness but i dont want to try again just incase the card reader gets F'ed in the A :/.
Rich
Try reformatting using SDTools(search it on Google,it's free) to fat32 and see if it works.If it doesn't,try copying some large files(>1GB) from your computer and check the speed while copying.After that,quickly remove it(Using safe remove or whatever it's called-I'm only used to clicking it ) and check whether it's hot or not.If not,then it's either a problem of the phone or an incompatibility.If it is hot and/or fails copying or copies too slow,then it's the card at fault.
Although my DHD has f*cked up my card many times too.Never had such problems though,just some random removings and some files corrupted but anyway.
Also run a check with windows,won't harm.
Hope I helped!
EDIT:Format using SDFormatter,not SDTools.SDTools is a market app that measures sd card speed.My bad!

Categories

Resources