Develop Bugs

SD Card not detected

I am using O2 XDA IIs PPC 2003 SE.
Now when I insert my SD Card 2 GB, the OS does not recognize it.
(It was good before.)
I've tried with another 256 SD Card, same result.
Those SD Cards are working well with my Card Reader plugged into my PC.
Anyone could help me please?
Thanks in advance.

I'm sorry I don't know.
However.. you've come to the wrong place if you want help.. people here seem to have an aversion to actually helping people out.. don't get me wrong, there are some very talented people that call this forum 'base', but they are understandably busy.. and the other's who hang just don't answer **** unless it suits them..
You are more likely to get the answer "read the wiki" which isn't the most helpful thing in the world. Even those of us who try others to help despite our knowledge being somewhat wanting.. just in the hopes of being seen to be at least trying, aren't deemed to be worth giving an answer to.
I suggest these two forums.
http://www.ipmart-forum.com/index.php
http://www.totalpda.co.uk/forum/
You will get help there.

Try soft resetting the device, poke the stylus in the reset hole and once the device re-boots it should see the card, you will not loose information performing a soft reset - Mike

thanks guys.

Hi, I've also have a sort of problem like yours. I tried soft reset n it actually works. But sometimes my BA still can't read my SD. I've tried format my SD n even upgrade my ROM. It seems that the problem is in hardware. I don't know what to do anymore

U have probably what I also have.. a faulty SD card reader or a bad soldering (welding)...

Last night I dissambled my BA n I found out that the screws around SD card reader were loose. I've tightened them up n so far I don't have any problem with SD card. But I've still exprerienced problem with my screen keep active when my BA was pressed even though I've locked the device n power off. I don't know what to do anymore. Any suggestion?

Problem already solved.
It was because tiny plastic dirts on the SD slot.
Once I cleaned it up, it's working as before.
Thanks to you all. What a nice forum we have here.

I had similar problems with a 1GB card. Formatting it in a PC-based card reader fixed it. Remember not to select quick format.

Can I put a 4GB SD Card in the Blue Angel? Will it work?

noone85 said:
Can I put a 4GB SD Card in the Blue Angel? Will it work?
Click to expand...
Click to collapse
It will work if the card is *NOT* a SDHC card.
I found my 4 gig card on ebay, topram is the brand, and it works fine as it is a non-SDHC card.

Sdcard not reconized
HI TO ALL..
I had installed miopocket 4.0 on my VDO Dayton PNA6000-WINCE 5 but
because of problems with Garmin XT I had to uninstall but the uninstall
did not do the best for me, now my SD slot dont read any sdcard i think
its corrupted registry and i dont have access to usb active sync only
have MTP (Media Transfer Protocol) when i connect to usb(no data
transfer). How can i access my resident flash(INTERNAL MEMORY) to edit
registry,change usb mode to activesync or something else???, i think sdmemory.dll is making
load problems.
Tnx in advance!

To have access to registry use TotalCommander or SKTools

but i dont have access to system, sdslot is not functional and i cant install active sync driver just mtu in device manager..

2gb sandisk micro sd problem

all,
I do have a strange problem with my Artemis P3300, or with my memorycard.
I bought a Sandisk 2gb microsd.
In the cardreader of my PC it had a problem, but after an upgrade of the reader it works fine.
When I put the card in my p3300, it seems not to be able to write more then 1gb.
If I put more than 1gb on the card with the pc cardreader, the pda does not have any problem with this.
does anyone have any idea what to do ?
J.

no one with an idea ?

Currently having similar problems with 3 2gb sandisk cards I have. Causes mulitple PC Lockups and also stuffed my Blackberry up as well. Still trying to figure it out.
Even thought that perhaps I had inadvertantly purchased the dodgy fake cards from a local store such is the problem.

What happens if you try to format them in a photocamera or perhaps via pocket mechanic (triall version available). Has to be FAT 16.
Should see about 1.9 gb available if it works.

Make sure the card is formatted as "FAT32". The older "FAT" format could only address a maximum of 1gb, so if you use this FAT format on a bigger card, you'll only see 1gb of space....
I've been there myself, as my wife's old ipaq PDA can only read FAT format memory cards, so anything bigger formatted in FAT32 can't be seen. Perhaps that's your problem on your PC and in making it work on there, you've accidentally reformatted it from FAT32 to FAT.

I tried both FAT and FAT32; both have the same problem.
I do see about 1.9Gb on both my PC and my PDA, but on the PDA I get an error when writing that 1 file that goes over 50% of the capacity. If I write over that limit with the PC it is working fine.
HTC helpdesk said to upgrade to WM6, but I guess thay say that to everybody who comes up with a question on WM5 now..
J.

I had the same problem with my old iPaq. The first half of the card was ok, the second one unusable. I changed the SD with another of the same brand, but the problem simply changed and the card was "sometime" readable.
I had no other choice but to change SD brand.

It's not that the second half is unusable, it gives an error on that 1 file that crosses the 50% border, once the border is crossed (by putting some more data on the card with the cardreader in the PC) it is fully usable.
J.

It looks like it's a different problem, I tried overwriting a folder with almost 8000 files in it (that was the one where I did encounter the problem with the other time) but now there is 1.4Gb used on the card, way over the 1GB limit.
And I stil get the same problem after a while, the problem is that I can't see how much has been transferred or how many files are transferred, since ActriveSync doesn't show me that.
Is there a limit of files in 1 folder to be transferred via ActiveSync ?
or is there a limit of files in 1 folder ? (I don't think so because there is no problem when I transfer them via the cardreader)
Any suggestion is welcome.
J.

I bought a 2GB sandisk card and it broke my phone!
I inserted the card and the battery and turned the phone on, after booting the phone did not recognise the card so I turned it off and went to take the card out. It was so hot it burned my thumb!
The phone wouldn't boot again, but luckily those nice people at Tmobile gave me a new one.
I won't be buying Sandisk again!!

Strange SD card Problem

I have been using Touch 4.02 with an 8gb card for ages now with no troubles then yesterday the storage card is no longer recognised by the phone? I tried the usual soft reset, taking the card out wiping it put it back in still no joy.
Reinstalled the sdhc cab file didnt work, Have just re-flashed with the new diamond look a like rom and still it aint recognising the card.
Has anyone got any ideas??

mikehulme1983 said:
I have been using Touch 4.02 with an 8gb card for ages now with no troubles then yesterday the storage card is no longer recognised by the phone? I tried the usual soft reset, taking the card out wiping it put it back in still no joy.
Reinstalled the sdhc cab file didnt work, Have just re-flashed with the new diamond look a like rom and still it aint recognising the card.
Has anyone got any ideas??
Click to expand...
Click to collapse
Probably your card is broken....
Try to insert it in a card reader and see if it recognizes the card....

Yeh will have to wait till I get home not sure my memory card supports SDHC though?

I have a similar problem, and like you I've been happily using an 8gb card for a while, but in the last week it has stopped working correctly.
Occasionally it is fine, but most of the time access to the card is either very slow or it doesn't appear at all.
I've tried the following but with no success:
- Using another MicroSD card (2gb)
- Reading the cards in a card reader and they are fine
- Reinstalling Artemis Touch 4.02 WM6.1
- Formatting the card (FAT32)
- Shimming the MicroSD card with bits of cardboard as I've read there can be a loose fit
- Cleaning the contacts on the card reader
- Pulling the contact pins out a bit to get a better fit
Does anyone have any ideas of anything else to try?

Does WM5torage work?

I did the followings to make my 4GB Micro SD usable by my Artemis:
1-flashed it to FAT32 in my laptop (I Had to format my laptop partition D of my HDD to FAT32 to make the microSD recognizable by my NTFS system).
2-copied the "system folder" from my older 512 MGB card as it is (hidden) to the root of my 4GB
3-The 4GB is readable by my artemis by now.
4-To make sure the crad will be working good in the future, I installed the "Flashcard" Cab in my Artemis and reflashed the card to FAT32, 512 Bytes 4KB clusters.
The card is just fine under Artemis windows, but I gatta take it out when flashing any new ROMs or Radio.
Hope that'd help you.

uniqueboy said:
Does WM5torage work?
Click to expand...
Click to collapse
No - WM5torage behaves the same ... i.e. occasionally works (if the phone can see the card), but most of the time it just reports an error

It is deffothe memory card just put my old 2gb back in the phone and it worked, I have tried the 8gb in my PC card reader and in y camcorder that takes sdhc and neither recognised it.
This explains why my phone started goin so slow it would take ages to do anything then the memory card was unrecognised a few days later.
Im guessing there is no way to repair these?

If you can't read it, you can't do anything...
R.I.P.... :|
Cheers

Gutted oh well

not as gutted as i am ... looks like i'll have to buy a new phone!

Just try to format it by these criteria
FAT32, 512 Bytes 4KB clusters
then let us know.

dude dont panic try to recover the card first before you format it. i am sure there are some imp data there eh?
use a disk recovery utility on ur pc
my best choice is Recover My Files http://www.recovermyfiles.com/
if you are using windows os also try to run scan disk
use pocket mechanic then on ur ppc
let us know how well u do

Sorry for posting...Wrong thread...

Help with formatting issue on Sandisk 16gb micro sd hc

Well first off I want to apologize for such a lame first thread, but I've been a heavy reader for a while now and this is the first time I haven't been able to solve it.
I bought a Sandisk 16gb micro sdhc class 2 card for my fuze and having a very difficult time formatting it.
I put it in my phone, connected it to my comp via usb and selected "disk drive" option on my phone, then on my comp selected the "open folder to view files" option and I put some files on it. I then disconnected it from my comp and a few minutes later checked to see if my files were on my phone, the files were there but it said the card was full when there was only ~1.2gigs on it. So I connected it back to my computer and when I tried to open the card it said that the card was not formatted, so I select the format now option and it will fail, saying windows could not complete formatting. I then downloaded the panasonic sd formatter from www.sdcard.com and tried formatting again and it says the write protection switch is on and to turn it off, well there isnt a write protection switch on the card...
So I'm not sure what to do at this point, can anyone offer any insight to this issue?
Thanks in advance for any help.

There is a write protection switch on the SD adapter

well in my case the "sd adapter" is my fuze/tp which has never had any problems serving as a disk drive adapter for my sd card in the past.
my laptop has a slot for memory cards and i do have a micro>sd apadter but my lt can not read sd hc cards.

no one can help or offer any insight?
I really don't want to have to buy another one..
I would be willing to donate to whoever can help me fix this..

SanDisk microSDHC card
I did move the write protection switch both ways and it still says write protected in either direction. please help. Thanks

i think it may be your version of windows. i had a similar problem even with a 4gb non-sdhc sd card. it can be read on the phone, but for some reason can't be read if put in the laptop. i just didn't format it because i know it worked.
when i bought a 16gb micro sd for my touch pro, funnily the laptop recognised it even with an adaptor. so maybe since i updated my windows vista, it also updated 'the driver' for the card?
sorry more anecdotal than anything else. just try to use windows update - if you use windows.it may help as in my case.

did u solved the problem???
i have the same problem
i can see the files from the card but i cant delete/copy/format (

the card may be a fake. registration does not actually authenticate the card. where were these cards purchased? if ebay or some similar site you should probably contact sandisk support to verify authenticity 866-sandisk

I have a same problem. Although it is a Transcend disc 16GB class 2. No, I didn't buy it on ebay. I am using Windows 7 x64. Copying to the card can happen when it is in the phone mounted.

same exact freaking problem

ok i'm having this same problem with a sandisk 8gb card... It's very annoying as i can read but basiaclly cannot write anything to it or format it. How was this problem solved?

still no solution?

im dealing with the same issue i have a 16g sd that came with my d1 and now my pc reads 14g from my phone then 31mb from a flash reader??

SD Formatter for SDHC
Kaptinkrunk said:
im dealing with the same issue i have a 16g sd that came with my d1 and now my pc reads 14g from my phone then 31mb from a flash reader??
Click to expand...
Click to collapse
Check out drgopoos thread and my post:
Szczepanik said:
Thank you this thread has helped!
You asked for more info and I would recommend two free programs:
1) H2testw 1.4 which tests to see if your card has genuine capacity
2) SD Formatter for SDHC This software formats all SD memory cards, SDHC memory cards,
Cheers
Tom
Click to expand...
Click to collapse
Cheers
Tom

I'll check up on it later thanks, what gets me is it reads fine from my phone but put in a micro SD adapter thing and my pc doesnt read it right, but any other comp it reads fine
Fascinating Devil Helly Bean Sept 1 Devil 1.3.1...

Check my last post on the thread I quoted - you are probably using SD slot on PC. Try USB. What card were you using.
Cheers
Tom
Sent from my NexusHD2 using Tapatalk 2

Szczepanik said:
Check my last post on the thread I quoted - you are probably using SD slot on PC. Try USB. What card were you using.
Cheers
Tom
Sent from my NexusHD2 using Tapatalk 2
Click to expand...
Click to collapse
Well its a dell PC flash card reader, the SD to micro I've tried 3 and I'll see what kind of SD but it was the stock one from my d1
Fascinating

[Q] SD card not letting me add or delete files

I've been spending waaay to much time trying to get this phone to work as I had expected with previous phones (even my LG G2x) giving me less problems. I recently bought a Sandisk 32gb, class 10 micro sd card and after transferring old music, pictures and videos from my old LG G2x with a 16gb card, placing files from my computer back onto my S4 with the 32gb card is a nightmare! Photos are transferred but too out of order to try and deal with although it's more the music problem that has me bugging. I have some success after putting about 3gb or so onto the new*32gb sd card but after that, the sd card flips out and starts using special characters for file names. Below I attached a screenshot of what I'm going through with another app called V1 Golf for Android. I'm stuck and any help is much appreciated. I can't delete anything on my sd card nor can I add. I've reformatted this card about 4 times now without success. Some say that a Sandisk have been nothing but problems for them, you think a Samsung card could be the fix?
I'm also running windows 7 on my computer as some people have said that could interfere with the transfer but it seems like that's not the problem being that downloading apps from google play shows corrupted files depicted below.

jakesteed808 said:
I've been spending waaay to much time trying to get this phone to work as I had expected with previous phones (even my LG G2x) giving me less problems. I recently bought a Sandisk 32gb, class 10 micro sd card and after transferring old music, pictures and videos from my old LG G2x with a 16gb card, placing files from my computer back onto my S4 with the 32gb card is a nightmare! Photos are transferred but too out of order to try and deal with although it's more the music problem that has me bugging. I have some success after putting about 3gb or so onto the new*32gb sd card but after that, the sd card flips out and starts using special characters for file names. Below I attached a screenshot of what I'm going through with another app called V1 Golf for Android. I'm stuck and any help is much appreciated. I can't delete anything on my sd card nor can I add. I've reformatted this card about 4 times now without success. Some say that a Sandisk have been nothing but problems for them, you think a Samsung card could be the fix?
I'm also running windows 7 on my computer as some people have said that could interfere with the transfer but it seems like that's not the problem being that downloading apps from google play shows corrupted files depicted below.
Click to expand...
Click to collapse
First, did you format this 32gb sdcard using fat32, exFAT or NTFS or ?
If you did not format it with fat32 then that could have caused the problem.
First you need to remove the card from the phone and plug it into your
computer using the adaptor which came with the microsd card so it can be
tested and repaired in windows.
Once the card is plugged into the computer and it's recognized by windows make note of the drive letter.
Then open a cmd prompt in windows by going to the start menu clicking on RUN then type "CMD" and click OK to open the DOS prompt.
Then in the black DOS window type: chkdsk E: /F then press "enter" to scan and fix errors on your microsd card.
NOTE: The E: is just an example, check the actual drive letter of the sdcard which is plugged into the computer.
Please note, doing the above will not delete any files or folders unless they are deemed unusable and cannot be fixed.
The chkdsk will NOT not format your microsd card.
Good luck!

jakesteed808 said:
I've been spending waaay to much time trying to get this phone to work as I had expected with previous phones (even my LG G2x) giving me less problems. I recently bought a Sandisk 32gb, class 10 micro sd card and after transferring old music, pictures and videos from my old LG G2x with a 16gb card, placing files from my computer back onto my S4 with the 32gb card is a nightmare! Photos are transferred but too out of order to try and deal with although it's more the music problem that has me bugging. I have some success after putting about 3gb or so onto the new*32gb sd card but after that, the sd card flips out and starts using special characters for file names. Below I attached a screenshot of what I'm going through with another app called V1 Golf for Android. I'm stuck and any help is much appreciated. I can't delete anything on my sd card nor can I add. I've reformatted this card about 4 times now without success. Some say that a Sandisk have been nothing but problems for them, you think a Samsung card could be the fix?
I'm also running windows 7 on my computer as some people have said that could interfere with the transfer but it seems like that's not the problem being that downloading apps from google play shows corrupted files depicted below.
Click to expand...
Click to collapse
Unfortunately I ran into a very similar situation with a 64gb SanDisk card. After several months of using it successfully without issue, out of nowhere some 20 gigs of data were stuck. It seems that 1 file in a nandroid was corrupt. After formatting, re-partitioning, deleting etc, etc. with Windows 7 as well as MiniTool Partition Wizard I was unable to ever get the corrupt file to delete. Thus leaving the $60+ card useless and a prime candidate for the trash. I chalked it up too a "bizarre" instance. I have since purchased 2 64gb cards, one to replace and one for my new S4. Haven't had the issue since (knock on wood). Not sure what the exact culprit was, the recovery? (TWRP), a freak occurrance? or Just a defective card? If you have any luck saving your card please post how you did. Although I realize this probably isn't helpful except to know your not the only one.

My sd card seems to be stuck.
About 20 of 64 gb being used.
Now I can't delete anything. Or add anything.
It appears to delete and then it just comes back.
Does that mean my sd card is dead.

scandisk 64gb
Had the same thing just happen to me. Transferred a few kernel files yesterday and today couldn't delete, add or format anything. I was able to copy all files to computer but that's it.

same thing happen to my sandisk 64gb class 10 microsdcard as well
is it a virus?

I had the exact same issue with a San-disk 64gb micro sdcard, I contacted San-disk, they offered me a replacement card.I suggest you do the same, hopefully they will exchange it for you.

MSK1 said:
My sd card seems to be stuck.
About 20 of 64 gb being used.
Now I can't delete anything. Or add anything.
It appears to delete and then it just comes back.
Does that mean my sd card is dead.
Click to expand...
Click to collapse
You can use another SD card to try whether this sd card is dead.
If anothe SD card can delete files, it proves that this sd card is dead, vice versa.

Did your problem solve? I'm experiencing now like with your problem. And I'm looking for an answer.