Sorry if this has been posted before, but i couldn't find anything relevent using search.
I would like to know if it is possible to 1) Listen to music and 2) Use M$ Voice Command on my bluetooth headset (JABRA BT205) on my Blueangel (Orange UK SPV M2000 running M$ Windows Mobile 2003SE)
Thanks in advance
Related
I have looked all over the Blue Angel Support forum and I was able to get the latest rom which includes the latest Radio 1.08 (I know there is 1.10 but I do not think it is available for cooking yet). I was wondering where everyone was getting this bluetooth stack from (as well as the BT3500 version) and most importantly if these two stacks support A2PD profile (High quality Headphone profile). I have this older PDA2K Broadcom cab file I got over the the firstloox forum that actually worked with my Loox 720, but I think it is a pretty old version. Do these two broadcomm stack versions include this profile and where can I get them and willI have to hardreset to install them or are they available as cab files?
Also with bluetooth on the PDA2k, is it possible to passthrough all the sound that happens in Windows mobile through the headset e.g. Music, videos, etc or is it only phone sounds that go through the headset? And are there any bluetooth headsets that can redial the last number dialed on my PDA2K using a button on the headset?
Look in WIKI for BT cabs.
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
(instructions for both 1.08 and 1.10 written by other forum members)
I use an I-tech headset (not sure if available in the States) this has a redial button (two short clicks)
I have last number dialed set to my answer phone, on Orange I use the Wildfire answer phone which has voice recongnition.
I can therefore dial any number using my blue tooth device.
this is exactly what I want to do. What did you use to set the answer button to last number redial. How exactly do I do this on my pda2k with a headset that has an answer button. Is it done on the headset itself or is it done on the pda2k with a special program or app? If you don't mind could you go into detail about this as this would solve the voice dial over bluetooth problem plaguing these devices as I could always use the voice service of my carrier (CIngular wireless in the US).
Hello all,
I saw that is alot of voice recognition/commands software are spead around the world,
Which program are best to work with SPV M2000 (2003SE) ?
Does anyone can suggest please?
The new microsoft voice command.V1.5 i think?
I am also very happy with Microsoft Voice Command 1.5 US - tried some of the others but I will stick to VC.
But you can't activate a voice-dial from a bluetooth headset (you have to press a button on the handset) *and* it won't listen from the mic in the headset either. It's pretty infuriating.
LONG SHOT: Has anyone hacked the bluetooth stack to allow this?
Chris
Have they fixed this yet. Is there any software out there for the PPC 6601, that will allow a bluetooth headset to use voice commands to dial or operate the PDA by voice through the headset.
Sprint PPC 6601, running Windows Mobile 2003 CE SE.
Jabra BT800 Bluetooth Headset.
From what I have gathered so far from reading the threads is that I will first need to upgrade to WM5? Will my 128meg of ram be enough for this?
My bluetooth on WM2003 SE seems to be version 1.0 is there a patch to upgrade that to 1.2 or is that WM5 only. Also im new here so if anyone knows any threads that have instructions on how to do this will help me out greatly thx.
I've searched for a solution to this but apart from upgrading the SPV M2000 to WM5 (I don't think I'm up to the task), I can't find a way of streaming stereo audio via bluetooth to my a2dp headset.
My M2000 has the latest firmware from the Orange site and runs on WM2003 second edition.
Any help or advise would be great.
I even installed the O2 bluetooth stack for the HTC Magician in a hope that it would work, but it didn't and now I can't get the program off the M2000 using 'add/remove programs'.
Will this cause any problems if I just leave it on the M2000 or is there a way to remove it ?
If this is possible on the Magician, why can't it be done on the Blue Angel ?
Any Luck with this ?
I use the Bluetooth connection between the HTC and the Parrot and it works just fine in my car…. As far as the phone hand-free functions are concerned.
When I installed TomTom (ver. 6) on the HTC I assumed that the voice of the navigator would also come out through the car speakers connected to the Parrot.
This is not happening! The phone conversations are going through the Parrot and INDEPENDENTLY the TomTom voice comes out of the HTC!
This creates quite a mess when I am driving (while TomTom navigates) and I get a phone call: TomTom keeps on talking over the phone conversation and most of the HTC screen is covered by the “incoming phone call” notification!
Moreover the ringtone of the HTC does not seem to work when connected to the Parrot and only a very feeble chime is there to signal an incoming call.
Does anyone have a solution to fix this inconvenient situation?
Thanks in advance for the insight!
I've got the same setup as you and have the TomTom voices coming out of the phone which has been the same with my previous phones such as the SPV C550 and he HTC wizard. I think it's down to the bluetooth stack implementation on the Windows Mobile phone. My mobile mutes TomTom when I am in a call and I get a flashing mute icon shown on the TomTom screen.
One thing to try is the Jetware bluetooth extension http://www.jetwaremobile.com/ which is designed to improve compatability with the Parrot systems. It will certainly help you get the correct ringtones through the speakers, though I'm not sure if it will help with TomTom voices.
Neil
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Thanks guys
Sorry I have been so busy lately I barely logged in the Forum. Just wanted to let you know that I have seen your replies and will look into the solutions you suggested. THANKS.. will get back to you soon with (hopefully positive)feedback
Vaguely related and possibly usefull information here:
http://www.modaco.com/Guide-to-usin...oneer-Bluetooth-Car-Stereoand39s-t252613.html
hotatomic said:
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Click to expand...
Click to collapse
Thanks hotatomic! I have installed that appz and it works!!! Great tip!
Any other useful tools for the P3300 we could exchange?
Cheers!
SiperX