I am getting a little worried here.
It is advertised everywhere that the xda IIs has voice dial, which to me reffers to me talking into a bt headset and it calls that contact.
If this is not possible, can fonix ispeak sort it?
The device comes with fonix voicedial software, but it does not work through the headset. I have my MDAIII mounted on the windscreen in the car and manage to use voicedial to make calls with over 90% accuracy and then talk through my jabra bt headset.
Which unit do you have PDA2K or IIs? I haven't seen any postings yet comparing the two devices, O2 may have addressed some BT issues before launching the IIs.
I won't have one (IIs, already have PDA2K) till next week.
getting the 2's next week. new officail date is the 15th nov. so should recieve it on the 16th
So what does it take to make this work? is it impossible. Can we not do something?
it take it that this product is using the mic hardware and not bluetooth mic?
http://shop.store.yahoo.com/cellpoint/padrblvoreha.html
Anyone come acrross this before: (scroll down to Kai’s Bluetooth Headset Patch 2004 )
http://www.pocketpcmag.com/_archives/sep04/bluetooth.asp
could something simular be done on the xda's
Or is this something where only ever going to get to use with bluetooth v2?
read this an help me please
http://forum.xda-developers.com/viewtopic.php?t=12824&highlight=
Its good to see progress being made but the main problem still is a hard ware based. The mic and speaker in phone hardware need to be bridged with the ppc... which gets me thinking.....as we can speak into ppc and listen to the caller then once we BT the call it was bridge/switch it.... dont understand why something so simple and a much required feature is missing :?
Hi,
I have installed the trial version of MS command and it seems to be doing the trick... I have a qtek 9090 and I did not see any installed software for voice dialing... Is it only on PDA2K?
Thanks.
Anonymous said:
Hi,
I have installed the trial version of MS command and it seems to be doing the trick... I have a qtek 9090 and I did not see any installed software for voice dialing... Is it only on PDA2K?
Thanks.
Click to expand...
Click to collapse
MS Command doesn't support bluetooth headsets either.
From the MS blurb: "Bluetooth Headset Support - Voice Command does not support using a Bluetooth headset to initiate a voice command but you can use a Bluetooth headset during the phone conversation."
So its the same as fonix. You have to speak the dialling command into the device, and it only transfers to the bluetooth headset when the device starts dialling out. If you can put up with that, fonix works pretty well.
JD
Well as much as I was looking forward to getting a PDA2K or SX-66, I feel that this is a MAJOR drawback that has me thinking twice. I read that your cannot initiate VOICE calls using a BlueTooth headset no matter what software you are running. Is this accurate?
If so, then why can the Audiovox SMT5600 do it by the way of voice tags?
Thanks,
Frank
Previous ms smartphones and pocket pc phones have not supported the bluetooth handsfree profile which would allow voice dialling. Since the new devices now support it its up to the software developers to implement it in their software. For example, using my SE HBH-200 on my imate PDA2K i can initiate voice dialling on the headset but on the imate there is nothing to interface with. If the Audiovox can do it there is no reason why a more powerful pocket pc cant do it as well
I have looked all over the Blue Angel Support forum and I was able to get the latest rom which includes the latest Radio 1.08 (I know there is 1.10 but I do not think it is available for cooking yet). I was wondering where everyone was getting this bluetooth stack from (as well as the BT3500 version) and most importantly if these two stacks support A2PD profile (High quality Headphone profile). I have this older PDA2K Broadcom cab file I got over the the firstloox forum that actually worked with my Loox 720, but I think it is a pretty old version. Do these two broadcomm stack versions include this profile and where can I get them and willI have to hardreset to install them or are they available as cab files?
Also with bluetooth on the PDA2k, is it possible to passthrough all the sound that happens in Windows mobile through the headset e.g. Music, videos, etc or is it only phone sounds that go through the headset? And are there any bluetooth headsets that can redial the last number dialed on my PDA2K using a button on the headset?
Look in WIKI for BT cabs.
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
(instructions for both 1.08 and 1.10 written by other forum members)
I use an I-tech headset (not sure if available in the States) this has a redial button (two short clicks)
I have last number dialed set to my answer phone, on Orange I use the Wildfire answer phone which has voice recongnition.
I can therefore dial any number using my blue tooth device.
this is exactly what I want to do. What did you use to set the answer button to last number redial. How exactly do I do this on my pda2k with a headset that has an answer button. Is it done on the headset itself or is it done on the pda2k with a special program or app? If you don't mind could you go into detail about this as this would solve the voice dial over bluetooth problem plaguing these devices as I could always use the voice service of my carrier (CIngular wireless in the US).
If you do let me know if it works the way it should
I'm still having problems using my qtek 9090 on my 3 series BMW with a original BT carkit...
If yours works fine, please let me know wich software is on your PDA and which type of BMW you drive..
I have the following problem... The only way it works is; when I first swich on my car (so also the carkit) and then I activate the bt function on the pda. I also have a solution. That the bt function on my pda is off when the pda is off, but nobody can tell me how this is possible.
Thanks
I can use it as a dumb carkit but it does not sync the addressbook or the SMS
I have a Qtek9100 WM5.0 os 5.1.70 (Build 14420.1.1.0) ROM 1.1.7.5, radio version 01.01.10 and the car is an X3 330D
I found on several forums that you need to be at a higher version.
so if anyone knows how to only upgrade the Bluetooth or a sollution for us
Does anybody know why Jabra BT800 show names of callers only on sonyericsson phones and none for the rest including the PPC all kinds. Some are saying it is because of the Microsoft Bluetooth stack. Is there a way to know what Bluetooth Stack is installed on the device and is there a way to change it?
I wondering with all those upgrades official and nonofficial with major additions to Bluetooth like the A2DP and SAP and others nobody is touching this major point. Caller ID names is crucial with bulky devices like the JJ.
I hope to get an answer for this from anybody
Thanks a lot
AKU 3.2 Jwrightmcps .96 radio .13
Try to install this http://www.jetwaremobile.com/index.htm
It will give you the CallerID
Unfortunately WM5.0 doesn't support it off-the-shelf.
Is the bluetooth stack in WM5 the same as the bluetooth stack in WM6? If not, is it possible to use the bluetooth stack from WM5 in WM6? I like WM6 but it does not work with the handsfree in my Nissan. WM5 works fine. WM6 will pair and activate handsfree when dialing but no audio on either end. I've tried many WM6 roms but none work.
Anyone have a suggestion?