Has anyone sucessfully installed MS Voice Command 1.5 with the New ROM (Jasjar ROM 1.30.68 WWE, Radio 1.09.00, extROM 1.30.153)? It installs but when I run it I get an error message and it disables itself. Any suggestions?
Thanks,
Sven
I have VC working fine with the new ROM - installed and worked just the same as before, so does the reg hack to enable operation via BT headset...........maybe if you try it again (re-install?) it will work
works fine on mine.
@sbatxda I had the same issue, VC would just close itself...what worked was a simple soft reset, I only figured this out after pulling out all my nose hair but hey it's never to late to learn Just do a soft reset an it should work as normal.
sorry, i assumed a soft reset was a foregone obvious solution and would be done automatically by anybody that has any knowledge of any microsoft system.
if in doubt, reset
youmeus: it worked ok on the new ROM then? I'll try to upgrade soon I guess then..
V
MS Voice Command 1.5
Thanks for the suggestions. I have made the register modification to get it to work with my BT headset and I have made multiple soft resets. I have some issue with the Voice Command install in that I have to first install the 1.0 version and then the 1.5 version; if I go directly to 1.5 the install tells me that there is no previous version and stops. This may create some issue, but this is also how I did it with the previous ROM version. I'll try a re-install again.
Regard,
Sven
@vijay555, yes I tried it again and it works ok now...but this new rom has a few issues that I am not comfortable with so I am going back to old rom once I get home later
@sbatxda, the better way to install VC is vis the cab file...just look for the cab file on your desktop eg C:\Program Files\activesyne\voice command\...etc and drag the cab to your PPC.
MS Voice Command 1.5 installation
Thanks youmeus,
Installing the .cab worked better.
I'm now having difficulties installing the .cab file with my ISP settings. It will not install on my device or storage card. This worked fine with the old ROM.
Ideas anyone?
Regards,
Sven
BT hack reg
@adesonic
installed and worked just the same as before, so does the reg hack to enable operation via BT headset...
Click to expand...
Click to collapse
please tell me the issue about this or send a link in a thread. VC 1.5 doesn't work with my BT headset.
DTR - try this - copied from another thread on here
MS Voice Command activation from BT headset
Now this one is sweet and makes the JASJAR the daddy for voice commands.
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It's reponses will be played through the headset too.
regs
sonic
@adesonic
oh, thatone I shure did try. But, having a Magician, I obviously had no success.
Maybe the fault is with the i-tech headset, which probably doesn't support connection.
I also had no luck with streaming audio to that headset, which some posts in other threads say is possible.
Thanx neverteless for your fast reply.
regards
Why haven't MS upgraded this software to a proper WM5 version yet?
OR have they and I haven't been paying attention?
Question: Earlier I and others have had problems with showing of contacts displaying a blank page.. Are you guys able to show contacts using Voice Command properly?
@eman, you have to add one the files form the VGA hack in your windows folder for VC to display contacts...I can't remember the name of the file so do a search on the board!
Great to know there's a solution.
Installing VC now
with the previous ROM there was the issue where it didn't work in laptop mode with the lid closed. Does VC work in that mode now, or are you guys using it in portrait mode?
It would be great if it did.
the file needed is outres.96.dll
no VC doesnt work when the clam is closed.
even on the latest release.
Related
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
i need your help with the bt patch
Hi,
I have downloaded the file from
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
and looked for the exe file, to run in my xda2.
The exe is a PC installer (didn't work in my xda - not a valid win32 app...)
I finished the installtion process, and now in my add / remove programs i have "Bluetooth Character Password Enabler".
But when i'm trying to bond with my Navman,
still only numbers can be entered. :roll:
Any idea?
(maybe someone have the EXE to run on my ppc, not the installer?)
Thanks in advance,
Tomer
This is a bit unclear, I used towa´s patch like said earlier, followed exactly the instructions and could enable the charpin, and enable my navman
just download and COPY the patch to your xda true activ sync or whatever, and the start the bonding procedure, and when the screen for the pasword comes up, you lanch the explorer on your xda look for the charenable pin, click on it, it will give the message charpin now enabled, close the explorer and type in NAVMAN in big font, and it works perfect.
let us know if you got it to work
Thanks for you quick response.
I tried to do the process as explained:
copyed the file EnableCharPin.exe into my ppc
(via active sync), turned on my navman,
start BT, look for devices, found the navman gps one, next,
and now when the password screen appears i went to "my documents", clicked on the file, and than the error message 'EnableCharPin' is not a valid Pocket PC application" appears.
Any idea?
I saw a post in the forum about registry key or hack, to enable it,
whithout further information.
Thanks,
Tomer
Problem with EnableCharPin
The work that has gone into tying to solve the issue is impressive.
Unfortunately I have the same experience with the response 'EnableCharPin' is not a valid Pocket PC application'
Does anyone have a way to accomplish inputting alpha characters via changes in the registry?
ROM 1.52.00WWE date 10/23/03
Radio 1.05.15
Protocol 1337.15
ExtROM 1.52.86
Regional settings Swedish
Rgds
I have NAVMAN GPS and have the same error. Can anyone explain how is it possible that one can run Windows installer on XDA??
I have just installed this WIDCOMM BT manager. This thing at least is not asking for any pincode so I can easily establish the connection but later on i am not getting any data on the port. I am using ArcPad application by ESRI and I am supposed to use port 8 for GPS.
Can anyone tell me why there is no data comming thru the port?
Another problem is that the connection is lost after few minutes...
it works 4 me now
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Re: it works 4 me now
Hey Tomer !
Thanks for your tip. I have had problems with the connection, but I used your tip, and now it works perfect.
tomerbn said:
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Click to expand...
Click to collapse
Navman bonding
I dont have a problem getting the XDA II to bond with it, the problem I have is I can only select Com 7 in the Bluetooth tools menu and when I go to set up the GPS in Smartst it wont let me select Com 7.
Anyone have any ideas
I have a XDA and a Navmann 4100. A couple of weeks ago my Navmann dealer sent me the patch EnableCharPin & BTHTools1012 and I started the bond between the PPC and the 4100 and all went fine but a couple of days ago I suffered and full reset on the ppc and now I can not bond the ppc and the 4100 anymore.
Can someone tell what shall I do to bond once again the ppc and the 4100?
I have tried several times with the same process as before (EnableCharPin & BTHTools1012) but I had no succes, the ppc does not allow me to write Navmann, it only lets me write numbers.
towa said:
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
Click to expand...
Click to collapse
I had this same problem when I had to do a hard reset with mine couldnt get it to rebond. The only way I managed it was to re install the character enable program. It seems to be specific on which order you do it unfortunately I cant remember what it was. I had to try it a few times myself for it to work.
The way I have managed to do it in the past is to make sure the PPC device is connected to your PC via active synch when you attempt to enter the characters (NAVMAN) That seems to in some way enable the enablecharaterpin software on the PPC. Let me know how you get on.
navman
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
rudey wrote:
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
Click to expand...
Click to collapse
Hi Rudey
Hard to say... I believe that a guy called towa wrote this for PPC, but if you look up his user name here and e-mail or PM him he might know
Hope that helps
Regards
Chris
Navman GPS One
Is it possible to get my 'old Navman GPS One' to work with my new Nokia N73?
Best regards
Martin
Enable CharPin
hi there
i tried a few links but i am unable to download Enable CharPin.zip from any for the link please can anyone help
many thanks
Hi Everybody,
I have an xda11 and have upgraded everything BUT i just cant get the bluetooth running properly all the time. could someone suggest something other than the obvious. I really screwed up my phone with bluetooth tools and their must still be something in the registry that is affecting my bluetooth. I have a hello2 headset which is fantastic. The problems really started with bluetooth tools. I have done several restores from my card but i think the problem is in the registry............anyways i love gadgets and you guys are the bomb.
ROM VERSION 2.06.00WWE
ROM DATE 06/14/04
Radio Version 1.18.00
protocol 1337.38
extrom version Sin.Merged v2.0
Hiya
Can you provide a few more details? Eg..
What OS?
Have you done a hard reset to refresh the device and still having BT issues?
What version of BT Tools did you install?
What exactly the issue with BT is: it stays on for a minute and then turns off / doesn't come on at all / any error messages?
Cheers
Ant
Thanks for responding
The operating system is
WM2003 second edition
version 4.21.1088 build 14132
Done a hard reset
The version of BT Tools was 1.1 (i think) but i did remove it.
and yes it stays on for a minute or it doesnt answer but it knows its on.
I just think ive screwed something up in the Reg. I have spb 2.5 , and a heap of programmes on it.
When doing a restore from my storage card - do i have to restore registry otherwise it would leave the "working" bluetooth after a hard reset.
I dont get any error messages-it just has a mind of its own. Also i cant answer another call while im on a call.
Sorry to be a pain..........if there is a BT stack i can download to overide this one-that wuld be cool or can someone tell me what dll's to delete so it fixes itself up????
Thanks again for your quick reply
Thanks for responding
The operating system is
WM2003 second edition
version 4.21.1088 build 14132
Done a hard reset
The version of BT Tools was 1.1 (i think) but i did remove it.
and yes it stays on for a minute or it doesnt answer but it knows its on.
I just think ive screwed something up in the Reg. I have spb 2.5 , and a heap of programmes on it.
When doing a restore from my storage card - do i have to restore registry otherwise it would leave the "working" bluetooth after a hard reset.
I dont get any error messages-it just has a mind of its own. Also i cant answer another call while im on a call.
Sorry to be a pain..........if there is a BT stack i can download to overide this one-that wuld be cool or can someone tell me what dll's to delete so it fixes itself up????
Thanks again for your quick reply
Hi
Does anyone know how to setup IGuidance to work with WM5? I dont know how to work the BT ports at all. In 2003se, i could use the "scan" for bt data and it'd find the itrek gps unit but now it results in "no gps found". alternatively, what other gps software will work other than tomtom? I dont have tomtom =(
I've got version 2.1 and it seems to work with WM5. I add the gps to the bluetooth and then I create an incoming and outgoing port. I set my gps to port 6. In IGuidance it won't detect the gps but if you manually choose port 6 it will work just fine.
Andy
iGuidance 2.1.3 locks up my Wizard after several minutes. Grrr...
I am having all sorts of trouble with my PDA2K (WM5) and iGuidance. Although I think it has more to do with my bluetooth than anything. When I first started trying to get it to work it gave me coordinates that I was in Africa... Anyway, I think I am going to go back to 2003SE.
I'm having a different problem with iGuidance v2.1.3 on WM5. It installs and runs just fine. I use BT over COM6 and it seems fine. The problem I have is that the coordinates are off. The strange thing is that when I run GPSInfo (a separate app) it shows the correct coordinates - iGudiance thinks they are different and thinks I'm in a different location ( a few miles away).
I gave up on it and decided to go back to 2003SE (iGuidace v2.1 that worked perfectly fine on that configuration a long time ago). I followed teh steps to format/clean hive and did the down grade but am having a different problem. I've seen other people running into similar issues but I've not been able to get around it
"BTTrayCE - bluetooth can no longer be used because the license has expired" - I have tried a number of things using different BT stacks, 2003SE builds, reset (soft+hard) etc. Same problem!!! Argh - I'm stuck. I really miss my GPS!
Hi krille,
I also had similar problems with my SX66 and iGuidance and finally decided to go back to win 2003 because it worked fine with it. In WM5 my BT GPS receiver was never able to make a connection with iGuidance. But now I am having a different problem. I cannot downgrade even though I followed all the instructions correctly posted on the BA_Downgrade page. The upgrade program ( MaUpgradeUt_noID.exe ) does not seem to identify the rom versions and though it gives me a successfully upgraded message nothing had happened. I cannot downgrade now and stuck with WM5. Did any of you experience this when downgrading and can offer me any help.
DEK.
I've been upgrading/downgrading with differnt ROMs without any problems
Make sure to disable activesync on the pc and copy the nbf files as described in http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5. Sometimes the verion info update to/from doesn't show between WM5/2003SE...
What happens when you click Update to continue?
BaUpgradeUt.exe worked
Thanks for your reply. I followed all the steps as described in the link you have sent but MaUpgradeUt_noID.exe did not upgrade (downgrade to 2003SE) though I got a message saying it did. Then I tried the file BaUpgradeUt.exe in PH20B folder and it did work. My device data file says my SX66 is in fact PH20B1 though. I do not know why MaUpgradeUt_noID.exe cannot update my ROM. Anyway I am happy now with my WM2003SE and iGuidance and BT all work faster with ROM update to 1.40. Now I am planing to customize my ExtROM to have all my personal settings and programs so that I want feel bad not having WM2005. Thanks for your willingness to help.
DEK.
Anyone got a working version of Microsoft Voice Command for Diamond? Mine doesnt seem to work.
got 1.6 and its working. i get an error during installation, but error message doesn´t matter...
1) Install Microsoft voice command on your internal device you will have a error after setup but dont care about it..
2) go to INTERNAL DEVICE/program files/Voice command
and copy the voicecommand exe file.
3) go to My device/windows/starting menu/program/ ( its the folders where you have all youre programs shortcuts)
And PAST the VOICECOMMAND shortcut
4) go to setting choice buttons and set for buttons 1 your microsoft voice command application ( choice it in the list)
msvc seems to work properly at first, but it doesn't accept commands and i can't hear anything, just the short beep beep and the small microphone
slikr said:
Anyone got a working version of Microsoft Voice Command for Diamond? Mine doesnt seem to work.
Click to expand...
Click to collapse
Search the Diamond Forum, Monty Burns has posted a fix.
jentech said:
Search the Diamond Forum, Monty Burns has posted a fix.
Click to expand...
Click to collapse
i need this for german version
fearomoon said:
msvc seems to work properly at first, but it doesn't accept commands and i can't hear anything, just the short beep beep and the small microphone
Click to expand...
Click to collapse
yes, after installation that seem to work proprely when you press the button 1 you can see the microphone icon. but that doesnt work i know!!!!
just follow the 4 steps man!!! and that will work perfectly!!!!
(in fact, you need to create a manuel shortcut in programs folders without that, mvc dont work really...)
just follow my instruction in my fist post....
1) Install Microsoft voice command on your internal device you will have a error after setup but dont care about it..
2) go to INTERNAL DEVICE/program files/Voice command
and copy the voicecommand exe file.
3) go to My device/windows/starting menu/program/ ( its the folders where you have all youre programs shortcuts)
And PAST the VOICECOMMAND shortcut
4) go to setting choice buttons and set for buttons 1 your microsoft voice command application ( choice it in the list)
Do anyone have any problem to install Microsoft Voice Command v1.6 on VM6.5? I am using Energy ROM and I got error messgae after finish install Microsoft Voice Command v1.6.
If the Microsoft Voice Command v1.6 doesn't support WM6.5. Do anyonw know any software does the same feature as Microsoft Voice Command v1.6?
Hi
I have just finished installing the voice commander on my HD2. I have also used a utility AEB Plus to configure the Windows button to activate the voice command with a long press. Works absolutely clean
Wbr
kdagia
leungda said:
Do anyone have any problem to install Microsoft Voice Command v1.6 on VM6.5? I am using Energy ROM and I got error messgae after finish install Microsoft Voice Command v1.6.
If the Microsoft Voice Command v1.6 doesn't support WM6.5. Do anyonw know any software does the same feature as Microsoft Voice Command v1.6?
Click to expand...
Click to collapse
If I recall correctly I got the error on 6.1 when installing - but it still works correctly
leungda said:
Do anyone have any problem to install Microsoft Voice Command v1.6 on VM6.5? I am using Energy ROM and I got error messgae after finish install Microsoft Voice Command v1.6.
If the Microsoft Voice Command v1.6 doesn't support WM6.5. Do anyonw know any software does the same feature as Microsoft Voice Command v1.6?
Click to expand...
Click to collapse
Im curious with this as well, i just had to hard reset my phone twice as it bricked my phone. Not sure how how others got the MSVC 1.6 to work on the HD2?
Agreed, it's been installing with an error for as long as I can remember but just ignore the messages as it always has worked fine with all the different roms that I've been using.
band27 said:
Agreed, it's been installing with an error for as long as I can remember but just ignore the messages as it always has worked fine with all the different roms that I've been using.
Click to expand...
Click to collapse
Mine doesnt get that error it just freezes mid installation and then nothing responds, the only solution is to hard reset.
If i just remove the battery to turn back on the HTC sense doesnt load and it just boots up forever. Im thinking maybe there is a MSVC 1.6 cab thats corrupt and possibly i have downloaded that one.
MSVC 1.6 on S710 Fireburned ROM
I have Fireburned "Official" WM6.5 running on my E650 (S710) and love the ROM but am also having problems with MSVC.
Although MSVC installs fine and shows no errors, I am having trouble getting it to activate. I previously had it working by using the MSVC Setup to turn it off, close setup, then reopen setup and turn it on again but now it just doesn't want to work at all.
Any suggestions gratefully received.
rexboy said:
Mine doesnt get that error it just freezes mid installation and then nothing responds, the only solution is to hard reset.
If i just remove the battery to turn back on the HTC sense doesnt load and it just boots up forever. Im thinking maybe there is a MSVC 1.6 cab thats corrupt and possibly i have downloaded that one.
Click to expand...
Click to collapse
have been using it since long on 6.5 using energy roms. does give error in installation but works like a charm. no issues.. u can try getting the cab file from energy roms addon folder..
by the way.. it never worked for me in original stock 6.1... works well on all energy roms.