Microsoft Voice command doesn't work on WM6.5? - Touch HD Themes and Apps

Do anyone have any problem to install Microsoft Voice Command v1.6 on VM6.5? I am using Energy ROM and I got error messgae after finish install Microsoft Voice Command v1.6.
If the Microsoft Voice Command v1.6 doesn't support WM6.5. Do anyonw know any software does the same feature as Microsoft Voice Command v1.6?

Hi
I have just finished installing the voice commander on my HD2. I have also used a utility AEB Plus to configure the Windows button to activate the voice command with a long press. Works absolutely clean
Wbr
kdagia

leungda said:
Do anyone have any problem to install Microsoft Voice Command v1.6 on VM6.5? I am using Energy ROM and I got error messgae after finish install Microsoft Voice Command v1.6.
If the Microsoft Voice Command v1.6 doesn't support WM6.5. Do anyonw know any software does the same feature as Microsoft Voice Command v1.6?
Click to expand...
Click to collapse
If I recall correctly I got the error on 6.1 when installing - but it still works correctly

leungda said:
Do anyone have any problem to install Microsoft Voice Command v1.6 on VM6.5? I am using Energy ROM and I got error messgae after finish install Microsoft Voice Command v1.6.
If the Microsoft Voice Command v1.6 doesn't support WM6.5. Do anyonw know any software does the same feature as Microsoft Voice Command v1.6?
Click to expand...
Click to collapse
Im curious with this as well, i just had to hard reset my phone twice as it bricked my phone. Not sure how how others got the MSVC 1.6 to work on the HD2?

Agreed, it's been installing with an error for as long as I can remember but just ignore the messages as it always has worked fine with all the different roms that I've been using.

band27 said:
Agreed, it's been installing with an error for as long as I can remember but just ignore the messages as it always has worked fine with all the different roms that I've been using.
Click to expand...
Click to collapse
Mine doesnt get that error it just freezes mid installation and then nothing responds, the only solution is to hard reset.
If i just remove the battery to turn back on the HTC sense doesnt load and it just boots up forever. Im thinking maybe there is a MSVC 1.6 cab thats corrupt and possibly i have downloaded that one.

MSVC 1.6 on S710 Fireburned ROM
I have Fireburned "Official" WM6.5 running on my E650 (S710) and love the ROM but am also having problems with MSVC.
Although MSVC installs fine and shows no errors, I am having trouble getting it to activate. I previously had it working by using the MSVC Setup to turn it off, close setup, then reopen setup and turn it on again but now it just doesn't want to work at all.
Any suggestions gratefully received.

rexboy said:
Mine doesnt get that error it just freezes mid installation and then nothing responds, the only solution is to hard reset.
If i just remove the battery to turn back on the HTC sense doesnt load and it just boots up forever. Im thinking maybe there is a MSVC 1.6 cab thats corrupt and possibly i have downloaded that one.
Click to expand...
Click to collapse
have been using it since long on 6.5 using energy roms. does give error in installation but works like a charm. no issues.. u can try getting the cab file from energy roms addon folder..
by the way.. it never worked for me in original stock 6.1... works well on all energy roms.

Related

Voice Command 1.5 with the New ROM

Has anyone sucessfully installed MS Voice Command 1.5 with the New ROM (Jasjar ROM 1.30.68 WWE, Radio 1.09.00, extROM 1.30.153)? It installs but when I run it I get an error message and it disables itself. Any suggestions?
Thanks,
Sven
I have VC working fine with the new ROM - installed and worked just the same as before, so does the reg hack to enable operation via BT headset...........maybe if you try it again (re-install?) it will work
works fine on mine.
@sbatxda I had the same issue, VC would just close itself...what worked was a simple soft reset, I only figured this out after pulling out all my nose hair but hey it's never to late to learn Just do a soft reset an it should work as normal.
sorry, i assumed a soft reset was a foregone obvious solution and would be done automatically by anybody that has any knowledge of any microsoft system.
if in doubt, reset
youmeus: it worked ok on the new ROM then? I'll try to upgrade soon I guess then..
V
MS Voice Command 1.5
Thanks for the suggestions. I have made the register modification to get it to work with my BT headset and I have made multiple soft resets. I have some issue with the Voice Command install in that I have to first install the 1.0 version and then the 1.5 version; if I go directly to 1.5 the install tells me that there is no previous version and stops. This may create some issue, but this is also how I did it with the previous ROM version. I'll try a re-install again.
Regard,
Sven
@vijay555, yes I tried it again and it works ok now...but this new rom has a few issues that I am not comfortable with so I am going back to old rom once I get home later
@sbatxda, the better way to install VC is vis the cab file...just look for the cab file on your desktop eg C:\Program Files\activesyne\voice command\...etc and drag the cab to your PPC.
MS Voice Command 1.5 installation
Thanks youmeus,
Installing the .cab worked better.
I'm now having difficulties installing the .cab file with my ISP settings. It will not install on my device or storage card. This worked fine with the old ROM.
Ideas anyone?
Regards,
Sven
BT hack reg
@adesonic
installed and worked just the same as before, so does the reg hack to enable operation via BT headset...
Click to expand...
Click to collapse
please tell me the issue about this or send a link in a thread. VC 1.5 doesn't work with my BT headset.
DTR - try this - copied from another thread on here
MS Voice Command activation from BT headset
Now this one is sweet and makes the JASJAR the daddy for voice commands.
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It's reponses will be played through the headset too.
regs
sonic
@adesonic
oh, thatone I shure did try. But, having a Magician, I obviously had no success.
Maybe the fault is with the i-tech headset, which probably doesn't support connection.
I also had no luck with streaming audio to that headset, which some posts in other threads say is possible.
Thanx neverteless for your fast reply.
regards
Why haven't MS upgraded this software to a proper WM5 version yet?
OR have they and I haven't been paying attention?
Question: Earlier I and others have had problems with showing of contacts displaying a blank page.. Are you guys able to show contacts using Voice Command properly?
@eman, you have to add one the files form the VGA hack in your windows folder for VC to display contacts...I can't remember the name of the file so do a search on the board!
Great to know there's a solution.
Installing VC now
with the previous ROM there was the issue where it didn't work in laptop mode with the lid closed. Does VC work in that mode now, or are you guys using it in portrait mode?
It would be great if it did.
the file needed is outres.96.dll
no VC doesnt work when the clam is closed.
even on the latest release.

Latest WM6 PDAVIET 2.00.7 Voice command don't work

I just updated yesterday for this nice ROM, and all is working fine except the voice command. Everytime that I turn on the voice command, I recieve one error message telling me that one error happaned and I hev to restart voice command.
Is there any fix for this?
RRibeiro said:
I just updated yesterday for this nice ROM, and all is working fine except the voice command. Everytime that I turn on the voice command, I recieve one error message telling me that one error happaned and I hev to restart voice command.
Is there any fix for this?
Click to expand...
Click to collapse
Have you tried to reinstall it? just to remind Voice command does work only on Device will not work if you install it on Card
heldeeb said:
Have you tried to reinstall it? just to remind Voice command does work only on Device will not work if you install it on Card
Click to expand...
Click to collapse
I'm talking about the voice command that comes integrated in the Rom, I didn't install nothing.
Its working fine for me m8. Perhaps its conflicting with some other apps? You could try to reinstall the image and see if works from clean.
Thanks, ill try that.

TomTom on WM 6

Hi Guys,
Has anyone got TomTom 6 working with WM6?
My TomTom Home on my PC is telling me that my device is incompatible
Cheers.
Works fine for me.
Im using Tomtom v.6.0 on my TyTN, and it runs like a charm.
WM6, tt 6.03 And tthome working sweet as
You might need to kill active sync to persuade tth to see the device again, oh and make sure you have latest version of tthome, not at pc right now so I havent a clue what it is
TTv6.0 works fine for me too in my Trinity
Same here, no issues
same here no problems with tt 6.03 and ax3l wm6 rom
I had a problem with TomTom after installing WM6. TomTom home kept saying that it didn't recognize my Trinity as a TomTom device. It took a few reboots of my PC and it finally agreed to let me reinstall TomTom.
I have been trying to install TomTom on my Trinity too. I am using WM6 too and it says the cab installation was unsuccessful.
I don't know why, it finds my device perfectly and installs the cab but I get the same message everytime.
Edit: DarkJedi is the f'ing man! He told me to copy the cab to my storage card and run it from there and it worked.
Thanks Matterhorn. That sounds like the issue I have. I'll give that a go.
Cheers all.
Be careful which WM6 ROM you use- some of them change the Device Code, preventing TomTom activation, and if that happens, and you have used your spare activation on TTCode.com, you will need to persuade TomTom to issue a new code, which can take up to 2 week's , and needs a copy of the origiinal proof of purchase for the device.
Another problem is that if you have to follow that route, although you can revert the OS to a previously activated one if you find WM6 not to your liking, TomTom Home cannot be reverted, and you won't be able to use it.
I'm using the Mun-Rus TE ROM, and it doesn't change the Device Code, but another WM6 Test ROM I used did change the code.
Works fine on my Trinity only when .NET 2.0 was missing there where some bugs.
If the activation lags there are some workarounds on the NET
TOMTOM 6 WM6 installation problem
I have exactly the same problem with the same error message....
Does anybody have an idea?
How can I check if GPS is enabled ?
Thanks.
Hello,
I've got a problem with Tomtom since one week. It turns off without reason, after some minutes. And when I restart it, it had lost my destination... So strange, isn't it ?
Anybody with the same problem ?
Thanks in advance.
Mister K, french user of SPV M700.
where can I get the cab-file?
maevro said:
I have been trying to install TomTom on my Trinity too. I am using WM6 too and it says the cab installation was unsuccessful.
I don't know why, it finds my device perfectly and installs the cab but I get the same message everytime.
Edit: DarkJedi is the f'ing man! He told me to copy the cab to my storage card and run it from there and it worked.
Click to expand...
Click to collapse
Where do I get the cab-file?
Michael

HTC 1.33 ROM w/ JAVA & Opera Mini 4 (can't install cloudyfa java)

This newest ROM from HTC includes Esmertec Java Jeodek 20070425.1.1 built in as part of the ROM.
I have successfully installed Opera Mini and have it working through this version of Java as well as via a shortcut (28#"\windows\jeodek.exe" -run s0_) and it launches Opera just fine.
I am having two issues:
1) I cannot get the selector.utf to work to disable or suppress the two connection warnings from Opera
I've tried a hex editor changing
domain=untrusted, \
to
domain=tckmax , \
domain=trusted , \​
to no avail. I even tried a fix.exe application which was specifically written to change the domain=untrusted, \ entry properly. It just doesn't work and I am starting to think that it has something to do with the Esmertec Java Jeodek being in the ROM from HTC.
... so
2) I tried to install Cloudyfa_EsmertecJbed, but it won't install ... I get an error message "installation of Cloudyfa_EsmertecJbed.cab was unsuccessful.
im running the cloudfa java on the new rom and it installed perfectly. i couldnt get the shortcut to work though and i havent tried to change the selector.utf file yet
doalittledanse said:
im running the cloudfa java on the new rom and it installed perfectly. i couldnt get the shortcut to work though and i havent tried to change the selector.utf file yet
Click to expand...
Click to collapse
Could you elaborate a bit on anything that you might have done, which would have enabled the successful install of the cloudyfa java?
I have tried SurrealNetworksAppUnlock & SDA Application Unlock and still can't get it to install.
Basically, I load the 1.33 ROM (the one from December, 2007 - we are talking about the same ROM, correct?) and immediately, without doing anything else to the phone, I try to install cloudyfa java and it fails, then I tried after installing the two unlockers I mentioned ... still get the same error.
I don't have any trouble getting other software to install ... very unusual.
i didnt even install the app unlock programs. and yes im using the same rom. did you try installing on the device instead of storage card? or vice versa?
doalittledanse said:
i didnt even install the app unlock programs. and yes im using the same rom. did you try installing on the device instead of storage card? or vice versa?
Click to expand...
Click to collapse
I really appreciate the follow-up and the post. Your response got me thinking about more about my install process, as opposed to some type of incompatability.
Turns out, the CAB file had gotten corrupted in the transfer from my pc to the phone. I deleted the file on the microSD card, copied it over again and it installed perfectly fine; as you indicated it would.
Posting from my dash, using (full-screen) Opera-mini, under the new HTC ROM & cloudyfa Java.
Thanks for the help!
boggsie said:
Posting from my dash, using (full-screen) Opera-mini, under the new HTC ROM & cloudyfa Java.
Thanks for the help!
Click to expand...
Click to collapse
no problem. did you get the shortcut working?
doalittledanse said:
no problem. did you get the shortcut working?
Click to expand...
Click to collapse
yes, perfectly ! Java starts up and runs Opera-Mini, unprompted. I also got the selector.utf mod to permit connecting without warning/prompt.
cool stuff, to be sure
Anyone know a way to get rid of the 2 connection security question when opera mini starts? in beta it worked to set untrusted to tckmax, but it doesnt work anymore.
stoto said:
Anyone know a way to get rid of the 2 connection security question when opera mini starts? in beta it worked to set untrusted to tckmax, but it doesnt work anymore.
Click to expand...
Click to collapse
With the java included on the DASH, I was not able to get tckmax to work. If I use a different java, one that I have installed, it works ... at least for me.
Have you tried it with a version of java that you installed, as opposed to the java included with the ROM?

Anyone got a working ver of Microsoft Voice Command for Diamond?

Anyone got a working version of Microsoft Voice Command for Diamond? Mine doesnt seem to work.
got 1.6 and its working. i get an error during installation, but error message doesn´t matter...
1) Install Microsoft voice command on your internal device you will have a error after setup but dont care about it..
2) go to INTERNAL DEVICE/program files/Voice command
and copy the voicecommand exe file.
3) go to My device/windows/starting menu/program/ ( its the folders where you have all youre programs shortcuts)
And PAST the VOICECOMMAND shortcut
4) go to setting choice buttons and set for buttons 1 your microsoft voice command application ( choice it in the list)
msvc seems to work properly at first, but it doesn't accept commands and i can't hear anything, just the short beep beep and the small microphone
slikr said:
Anyone got a working version of Microsoft Voice Command for Diamond? Mine doesnt seem to work.
Click to expand...
Click to collapse
Search the Diamond Forum, Monty Burns has posted a fix.
jentech said:
Search the Diamond Forum, Monty Burns has posted a fix.
Click to expand...
Click to collapse
i need this for german version
fearomoon said:
msvc seems to work properly at first, but it doesn't accept commands and i can't hear anything, just the short beep beep and the small microphone
Click to expand...
Click to collapse
yes, after installation that seem to work proprely when you press the button 1 you can see the microphone icon. but that doesnt work i know!!!!
just follow the 4 steps man!!! and that will work perfectly!!!!
(in fact, you need to create a manuel shortcut in programs folders without that, mvc dont work really...)
just follow my instruction in my fist post....
1) Install Microsoft voice command on your internal device you will have a error after setup but dont care about it..
2) go to INTERNAL DEVICE/program files/Voice command
and copy the voicecommand exe file.
3) go to My device/windows/starting menu/program/ ( its the folders where you have all youre programs shortcuts)
And PAST the VOICECOMMAND shortcut
4) go to setting choice buttons and set for buttons 1 your microsoft voice command application ( choice it in the list)

Categories

Resources