Related
OK found this in www.ppc-welt.de
copy the zip to PDA
open on PDA
start power.reg
then open power.exe
here you will find now processor tab with Turbo Mode function.
The password is : Agent Jay
I think it works but test it please and tell us your suggestion.
Now we need someone who can program this for a fix installation. This cheat will work till next softreset. after Reset you have to reinstall power.exe.
cheers :lol:
Cerumen
cerumen said:
OK found this in www.ppc-welt.de
copy the zip to PDA
open on PDA
start power.reg
then open power.exe
here you will find now processor tab with Turbo Mode function.
The password is : Agent Jay
I think it works but test it please and tell us your suggestion.
Now we need someone who can program this for a fix installation. This cheat will work till next softreset. after Reset you have to reinstall power.exe.
cheers :lol:
Cerumen
Click to expand...
Click to collapse
Did you know?
This option was for 2020i which has 416Mhz CPU wordclock by default.
You had to check it if you wanted your PDA used 520Mhz.
Our Jasjar has 520Mhz default, so I don't think it is doing anything.
if you need some CPU modification use XcpuScalar. This is the best I think,
http://forum.xda-developers.com/viewtopic.php?t=38823
You just linked back to the same post
The correct link is :
http://forum.xda-developers.com/viewtopic.php?t=39099
Apparently this won't have any use on the Universal? correct?
Any help Pls???
a regular install ??
have u tried installing the arabyising suite from imaginet, regularly... ?
u mentionned previously u would install a w2003se, is such a rom available ?
I'm downloading the Arabizer from Imaginet now and will install it as soon as the download completes, but I doubt it will work properly as it is made for windows mobile 2003 and not 2005.
Unfortunately ther is no such Rom "2003" for Jasjar.... if it were there, it would have been much much faster and reliable.
Regards,
Khaled.
arabizer from jasjar extended rom
u can get the arabizer cabs from the erom of jasjar, i have them i can send them via e mail , i think they r too large to post as attachements here. my email is : [email protected]
salam
dr. mohamed eldardiri
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
they worked properly with me
i installed only 3 cabs , successively : the one with 1- acert, 2- acert2 , then 3- Ado , in this order, with no interruption inbetween, then i reset , it worked properly, i didnt use other cabs , as i used third party dictionary and calenders and stuff ... so i only installed the cab of my local provider , so that i be able to use wi-fi, everything is ok now. i installed the old imaginet arabizer , but it didnt work at all , and i hard reset.
one question though , i need to know how to use the arabic hardware keyboard as there s no alt key.
salam
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Mohammad,
One of our room mates suggested me a solution, I tried it and it worked better than the default Arabizer which comes with the original old rom .
If you're interested to view the solution you can access it from this link:
http://forum.xda-developers.com/viewtopic.php?t=43213
Thanks again for your valuble support.
Regards,
Khaled.
arabic hardware keyboard
hello khalled
i was wandering if the new arabizer suite u installed supported the hardware arabic keyboard, coz i failed to use it using the default cabs. i knew that the shortcut keys are (shift+Sym) but it didnt work ...
salam
Hello Dr. Dardiri,
I installed the Arabizer from Imaginet web site, and I can tell you that it's much better than the one came with the I-mate rom.
But unfortunately I tried the hardware Arabic Keyboard but didn't work with me.
I will report this to the i-mate website support and see the result.
Salam,
Khaled.
Hi.
Looking for a way to disable RandomAccess so that the contacts app will not try to load it when running.
In a strange way, My TyTN can not run contacts and complains about RandomAccess for using too much of its memory, so I would like to begin checking it by disable RandomAccess.exe
Any ideas
Thank you in advance
Amit.
I have same problem too much time!
Same Problem
How I Can Fix This Problem Plz Tell Me I Cannot See Contact List Plz Help Me
TRY THIS
I Have Fixed This Pproblem Copy And Past Attached File In Window Dir
new version and 3d here:
http://forum.xda-developers.com/showthread.php?t=373677
Thanks Ervius,
downloading...
pampito said:
Thanks Ervius,
downloading...
Click to expand...
Click to collapse
and....
if you find other bugs, I try to solve them,
but the ones by HTC Home was terrible..... 6 or 7 mb in memory waste all....
hopeing they' ll solve this big iusse in a next release.....
....... It is not perfect ... he does not make the coffee! I want a rom which prepares the coffee! ERVIUS thanks
marco3254 said:
....... It is not perfect ... he does not make the coffee! I want a rom which prepares the coffee! ERVIUS thanks
Click to expand...
Click to collapse
I'm juts preparing an utility fot that....
wait...
I've just installed it, everything works fine except the Touchpad, it doesn't show up when I change from keyboard to phonepad. I didn't install anything on the PDA yet.
hi ervius i installed your last relase ican say tha previus was better this cometimes ave lock and i lose all controll of my device need soft reset
sip change don't work with pcmkeyboard also if i put the dll. into windows
marcosorano said:
hi ervius i installed your last relase ican say tha previus was better this cometimes ave lock and i lose all controll of my device need soft reset
sip change don't work with pcmkeyboard also if i put the dll. into windows
Click to expand...
Click to collapse
I had a device lock too while using the TouchFlo and needed to reset.
marty_73 said:
I had a device lock too while using the TouchFlo and needed to reset.
Click to expand...
Click to collapse
never seen this problem, for keypad, I made other hard reset and now works, this one is really a mistery for me....
no solution in mind for it...
Hi ervius... where can I find some more info about sdconfig? I'd like to know how to configure it, if I can install apps into main memory too, modify settings, add registry keys...
GDT said:
Hi ervius... where can I find some more info about sdconfig? I'd like to know how to configure it, if I can install apps into main memory too, modify settings, add registry keys...
Click to expand...
Click to collapse
there is a package somewhere, about cabs.... only insert into sdconfig\ folder into storage card, for registry tweak, you must learn about provxml files...
bye!!!
ervius said:
there is a package somewhere, about cabs.... only insert into sdconfig\ folder into storage card, for registry tweak, you must learn about provxml files...
bye!!!
Click to expand...
Click to collapse
And where will the cabs be installed? Into SD Card, into main memory or I can choose it?
GDT said:
And where will the cabs be installed? Into SD Card, into main memory or I can choose it?
Click to expand...
Click to collapse
there is apposite 3d about
http://forum.xda-developers.com/showthread.php?t=372309
Another great work, sdconfig is a very great idea. I have flashed and all work fine but I have a little question: with your weather configurator is possible change between Celsius and Farenhait ? It's necessary for MeteoRay.
Thanks.
mar_60 said:
Another great work, sdconfig is a very great idea. I have flashed and all work fine but I have a little question: with your weather configurator is possible change between Celsius and Farenhait ? It's necessary for MeteoRay.
Thanks.
Click to expand...
Click to collapse
no, only celsius, but we can update it, only, tel me what uou need!!
bye!
MeteoRay software display properly temperature only with Fahrenheit grads in settings otherwise it display temperature in Fahrenheit instead Celsius.
Ciao.
chiamata vocale
I have not "chiamata vocale"
ABOUT THE PHONEPAD BUG: I did a hard reset, the Phonepad worked for a few minutes, then it stopped to work after a soft reset, maybe the bug appears after you get into the SIP properties.
Hi, can someone tell me which is the plugin (and where I can take it) that add the thin line of the battery status on the top of the screen.
Thanks
Bye
actarus999 said:
Hi, can someone tell me which is the plugin (and where I can take it) that add the thin line of the battery status on the top of the screen.
Thanks
Bye
Click to expand...
Click to collapse
batterygauge.... here:
Can anybody patch the FastGPSsetup.cab from the original X2 to use with the X1.
I tried the cab. Installation is o.k. but after a restart it is no more possible to go on Start Menu.
I put it in the attachements.
it doesn't need to be patched. it should (i can't guarantee it) work if you install more cabs, but I haven't checked too much.
which cabs should I install in addition?
I tried instlling after fastgps other programs.
but just the same happens, after instllation of fastgps the startmenu is out of order.
problem with fastgsp for X2
hi guys
i tried also to active gps on my xperia X2 by patching fastgspsetaup.cab but it doesn't work !! no icone in the start/setting/System !!
plz help...how can i do ?
aleloya
hi
i think find something :
after patching fastgpsstup.cab on my phone (remember i didn't find any trace in the setting ! ) i restart my phone. i lanch googleMap, in the menu i choose Options/reinitialise google map...i lanch again googleMAp and i choose "use GPS" and...i saw a the righ top something like "GPS actif (x)...) x is the number of satteling found (sorry my language phone is in french)
i am going to test it after in open area
so good luck...
is it same program like QuickGPS?? cause i use QuickGPS rightnow
hans_karl said:
Can anybody patch the FastGPSsetup.cab from the original X2 to use with the X1.
I tried the cab. Installation is o.k. but after a restart it is no more possible to go on Start Menu.
I put it in the attachements.
Click to expand...
Click to collapse
I think quickgps is better than it