Hey Vjaayyyyyyyy The new rom has a gap in the bottom of the connection manager. Do you know of anyway to overcome this?
Mike
Getting the same problem
How annoying
Hmm, haven't looked into it yet. I've not touched the new ROM yet, but my Universal rom is so screwed due to the stuff I do to it, I think it's time for a refresh. what rom are you using?
On the Phone Dialer, all we needed to do was copy in two bitmaps to replace the originals. Send me over a copy of the manager, or otherwise point me to the rom, and I'll see if I can do similar. At least this one is more VGA compatible then the last few. Try resource hacking it to see if it corrects it.
BTW - Sctojen - I notice you've still got the vertically offset (ie incorrect) titlebar text. Have you tried changing the font or playing with your window metrics (try CETuner to play with this stuff). I'm using a font called VJNina, posted somewhere or other on the board.
V
Vijay the following is the test imate rom I am using. Everything else rendering wise is fine.
i-Mate JasJar (PU10) Rom 1.30.68 WWE
Radio 1.09.00
Protocol 42.42.P8
Vj.
Not to sure what you mean by the horizontal text. Am Guessing from what i could make out do you use VJninja as like a system font. If so i will do a search and give it a try.
Also i notice in your screen shot you have got a nice looking battery bar sitting at the top of your screen where did you get this from.
Unfortunatly the new imate test rom comes with battery icon below (couldn't really get a good screen shot as it was in charging mode but with yours i notice you get several little bars with the 1 in the new imate rom the icon has just 2 big bars full and half full yours looks a little bit mor accurate. i would like to find out how to remove the one on mine and give yours a try.
Many thanks for all your help mate.
Scott
scotjen1: the vertical offset of your caption - in your screenshot, "Start" is touching the top of the caption bar. In mine, it's in the middle where it should be. This can be fixed, someone asked me once how I did it, I can't remember, but basically I use VJNina as my system font and CETuner to fix my "metrics". Have a look in the VGA thread for details (I think). But that's just cosmetic.
Battery bar - no idea. I thought it was built in. I'm not running much 3rd party stuff on my universal, since I only use it for development. I don't think I ran the extended rom cabs, so again, I'm not sure. I'll have to upgrade to the new rom soon and start playing. I haven't had time to look into any of it yet Busy weekend coding...
V
vijay555 said:
Battery bar - no idea. I thought it was built in. I'm not running much 3rd party stuff on my universal, since I only use it for development. I don't think I ran the extended rom cabs, so again, I'm not sure. I'll have to upgrade to the new rom soon and start playing. I haven't had time to look into any of it yet Busy weekend coding...
V
Click to expand...
Click to collapse
I think your battery bar is from SmallMenu/Plus (I think you told me once that you used this?). You can turn it on/off in the SmallMenu settings. (well - it certainly looks like the smallmenu battery indicator!)
man, do I have egg on my face.
Riceburner is correct, that's the battery icon from SmallMenu. You know, I never noticed? I use smallmenu on my Magician, which is my day to day phone, but I disable the battery icon because I use my VJToggleToday/PhoneAlarm hack instead. My universal hasn't been modded much at all yet by me, so I must have just left the icon on and not noticed. It's useful though.
V
For those interested, here's a link to the Nina font,
http://www.vijay555.com/nina.zip
and VJNina, a cut down version 1/2 of the size, but removing certain rarely used (by me) international characters.
http://www.vijay555.com/vjnina.zip
V
VJ, i guess its got nothing to do with the font. I had the start caption at an offset when i used to use OZvga to make the reg changes. I guess ozvga messes with some unwanted reg setting screwing it up....
However, if you copy the corresponding dlls (with 96dpi), and change the LogicalPixels reg values, the caption is center alligned!
Cheers,
San
Does anyone have the problem I have with the new rom, the new battery icon up on top bar still says its plugged into power when you unplug it from the computer, if I reset it it fixes it. Does anyone know how to fix this.
dreamtheater39: I'm sure it's not just the font, no reason why it would be. But I monkey around with various metrics, scrollbar size etc, as soon as I change resolution. So it's one of those. Not sure which, I just always play with a few by default... seems to correct the problem itself.
I just use VJNina because I find it a neater font then Tahoma at those resolutions. It's a hangover from my SPV days.
V
seal said:
Does anyone have the problem I have with the new rom, the new battery icon up on top bar still says its plugged into power when you unplug it from the computer, if I reset it it fixes it. Does anyone know how to fix this.
Click to expand...
Click to collapse
I have this problem too. Only when using Real VGA though, so my guess is that it's a problem with a slightly incompatible 96 dpi .dll file? (Of course, I don't really know what I'm talking about here, so feel free to expose my ignorance, everybody! )
dreamtheater39 said:
VJ, i guess its got nothing to do with the font. I had the start caption at an offset when i used to use OZvga to make the reg changes. I guess ozvga messes with some unwanted reg setting screwing it up....
However, if you copy the corresponding dlls (with 96dpi), and change the LogicalPixels reg values, the caption is center alligned!
Click to expand...
Click to collapse
The issue is with the system font size. For some reason, if you try to increase the size of the system font on WM5 it leaves the font at the same size, but raises it up. By default OzVGA tries to increase the size of all of the fonts when you switch to VGA mode. If you want to continue to use OzVGA and you don't want to deal with this, just go into the settings and change the System Font size for VGA mode to 900.
Brett
Brett
Worked a treat
Thanks
scotjen1 said:
Getting the same problem
How annoying
Click to expand...
Click to collapse
Hi, i am also getting this problem, I ahve patched with other utilities. Except this one.
Any one please suggest the changes to be done. Cheers
Related
Hi everybody,
I want to use a picture as wallpaper in my Qtek 9000..
But there is a problem: the lines between the Today plugins!!
I solved DEACTIVATING all today plugin!!
But i can't belive that i can't ERASE that damned lines!
Well: i tryed Wisbar Advanced desktop... but it slows the PPC..
I would write to Microsoft.. Because i HATE that lines..
I could use Pocket Plus.. But seems it crashes PDA..
Can you suggest me something similar.. Maybe freeware..
Please help me..
Bump and ditto, easy solution?
I too would like to know how to get rid of those stupid lines, it just makes any background image look crap.
I have managed to edit the Tomtom logo and made it smaller so it takes up less space but the annoying lines have to go.
If anyone out there knows a solution it would be greatly appriciated.
how did u edit the tomtom logo?
You could try changing the colour of the lines. Google for Tweaks2k2 and you should find a great tool you can download and use 3 times before needing to purchase it. BTW, the tool does a lot more than give you the ability to change the colour of the lines. This is a must-have app.
I can't belive that the only solution is to change the line's color!
I want to see the picture of my girlfriend WITHOUT that UGLY and STUPID lines!
No other phone in the world doesn't show a full picture!
I think that the solution is to write to Microsoft.. I can't belive it.. But there is no other solution!
They have to chang Today.. It's too old.. Based on old Pocket PC (In portrait)..
Maybe i posted in a wrong room?
on a old jornada I had I recall an app that had this as an option, so its possible, there must be a way to do it, maybe just replacing the image used for the lines with a blank one?, Im no coder or anything like that, just throwing out an idea, this is a developer forum, maybe someone could throw together a quick and dirty hack or maybe a reg hack, somebody help us out, I hate those lines too.
bhang
This issue has come up in several threads. The only way I know to "get rid of" them is to change the color to match the background by using a Theme Generator program.
I found links to the SHMetrics value in the SHELL32.EXE code of wm2003se. It is all done by COMMCTRL.DLL and te lines are called TodayLVItemLine2 and TodayLVItemLine1. But this is very undocumented. The problem is that you need to reboot every time you change something in the SHMetrics value.
See this post http://forum.xda-developers.com/viewtopic.php?t=44154
I am still fiddling around with various values of this SHMetrics value. Problem is that I realy don't know what the effect is on what GUI element.
Perhaps one day...
Cheers
Im running wisbar advance 2 and I average 2-8% cpu (overclocked to 264) with it running but I dont see a setting to remove the lines, correct me if Im wrong...
I wish wisbar had different edge/gprs icon support, edge is spotty in many areas I frequent, so I trey to dl when im in an edge supporting cell...even if it just showed the actual icon like "notifications"
bhang
to change the colour of the tomtom sign just go to paint and zoom in and change the colour to your desire. i have made mine deep red. and to change the size go into photoshop and change the image size to a smaller size.
Once you have the one you want just go to the tomtom folder that should be on the root of your device and replace the file ttoday.bmp with the one you have. You might want to back up the original ttoday.bmp file just in case.
Once replace you don't even need to soft-reset. just go into settings-today and check to see if tomtom is selected to appear on your today screen. once you tap on the tick in the corner your picture will be updated.
Il try to attach the ones i have done but this is my first time attaching an image so it might not work.
As for the crappy lines on the screen.....Is there not a way just to make the lines invisible???
to change the colour of the tomtom sign just go to paint and zoom in and change the colour to your desire. i have made mine deep red. and to change the size go into photoshop and change the image size to a smaller size.
Once you have the one you want just go to the tomtom folder that should be on the root of your device and replace the file ttoday.bmp with the one you have. You might want to back up the original ttoday.bmp file just in case.
Once replace you don't even need to soft-reset. just go into settings-today and check to see if tomtom is selected to appear on your today screen. once you tap on the tick in the corner your picture will be updated.
Il try to attach the ones i have done but this is my first time attaching an image so it might not work.
As for the crappy lines on the screen.....Is there not a way just to make the lines invisible???
Do you miss knowing which letters are on which numbers, like when dialing a number from a business? Like, "Call Now! 1-800-YES-YEAH" Here's the fix for Kavana/Ricky/HTC based ROMs.
This is a mod of Surreal Networks Alpha-Numeric Display patch (grey), without the T-Mobile Branding:
Now, with correct spelling. (Hey it was late!)
download BRANDING.GIF
place in the Windows folder
browse to it with resco explorer
rename to ms_mobile.gif, confirm
May require rebooting. You are welcome to modify this, make into a .cab or desktop installer.
UPDATE April 4: Newest version, no branding, simpler install, and works on both the in-call and dialer screens here! Or jump to page three for preview.
UPDATE April 18: One Point Zero release here: http://forum.xda-developers.com/showthread.php?p=2129954#post2129954
Thanks, that's great. Although, you spelled Excalibur wrong...
Thanks a ton! This is a great help!
Nice but I was wondering how the hell to get the panel AFTER you make a call to show the numbers on Kavana's 6.1. Like automated service tells you to put in your name or whatnot on the dialpad....
dialpad cab minus excalibur branding
attached is the same dialpad without the Excalibur branding.
install cab, reboot, enjoy.
thanks to Ben Hirashima for the cab
MountainDrew said:
Thanks, that's great. Although, you spelled Excalibur wrong...
Click to expand...
Click to collapse
Fixed!
Now, I am analyzing how to make a slicker package from Ben's example.
Yianaki said:
Nice but I was wondering how the hell to get the panel AFTER you make a call to show the numbers on Kavana's 6.1. Like automated service tells you to put in your name or whatnot on the dialpad....
Click to expand...
Click to collapse
Not sure. I will look into it. I suppose it could be added to the top of whatever image is in the "next" screen?
So it's only in one colour, and it might not match your blues, but I'll share the one I made for my phone if any of you like it.
I made one too
Windows standard colors
Here are original ones for each of the default colors and Segoe text. No Branding. Included one in grey, too!
Anyone else having a problem with the automatic alpha-num installers with a cooked ROM?
I like the one with T-mobile Branding. It makes the rom feel more official. (Extracted from the Surreal Networks CAB)
ygb said:
I like the one with T-mobile Branding. It makes the rom feel more official. (Extracted from the Surreal Networks CAB)
Click to expand...
Click to collapse
I am working on a complete suite of not T-Mobile Branding, trying to figure out the splash screens at the moment. I just cant dig the pink T; Ive tried! Been cruising the other forums for clues...
It seems that the Ben dialpad works on the in-call screen, but I cant simulate the behavior if i uninstall his cab and manually it the reg. What keys do others use to change background on the in-call screen? IT really needs some livening up anyway.
Profezza said:
It seems that the Ben dialpad works on the in-call screen, but I cant simulate the behavior if i uninstall his cab and manually it the reg. What keys do others use to change background on the in-call screen? IT really needs some livening up anyway.
Click to expand...
Click to collapse
Just one key...but it has to point to a file that exists. So if you've extracted the .gif file from the .cab / make sure you drop the .gif file in the windows directory and note what the .gif filename is as thats what you're going to put in the regitry entry...also make sure you soft-reset otherwise it won't change until then.
And as far as the in call screen is concerned ... look for a file in \windows directory named cprogback_land.png for your in-call screen
Here's the one that i use: It looks good with technology's another blue color scheme .......Just rename the extention from .jpeg to .png if you want to use it
nice tip! thanks!
pudgedaddy said:
...And as far as the in call screen is concerned ...
Click to expand...
Click to collapse
It appears that that file is hard-coded, so there is no way to mod the reg with the installer, but it looks like windows mobile's .cab-install system will back things up alright from a file replacement approach. So, a single installer for both is do-able.
Interestingly, the image I am overwriting is called Carrierlogo.gif, not cprogback_land.png. Are there two potential images retrieved for the call screen, one in the fore and one in the back? I wonder what I could do with that info...
Or, maybe it is named differently in different source roms with the same purpose. Will text that next.
boom, got it
So, I think i this is how the in-call graphics work:
It appears that the call screen does indeed call up two images (not including a contact thumb, if applicable) The background is hardwired as "cprogback_land.png". Also, instead of having the carrier text string at the top, it can have an image across the top, which is hardwired as "carrierlogo.gif". Nothing can be done, as far as I can tell, to change the pointers to other files, so overwrites are the only method of changing.
If the graphic is put inside the background image itself, it can be the full width of the screen, like any background, and likewise any height (up to 213) But the in-call screen is a bit busy.The top 24 pixels (after the window top) are reserved for the carrier branding text string (or image), followed by 2 blank rows of pixels and a horizontal rule at row 27. The next 88 pixels (the middle area is a call status area followed by another rule at row 116, and pressed digits fill the bottom area.
However, if the graphic (.gif only) is in the foreground, it can be any size and proportion, but if it is taller than 24 pixels, or wider than 311 pixels, it will be (UPDATED) scooted over four pixels and cropped to fit a box of those dimensions at the top. If it is smaller, it will be top-, then left-aligned. Either way, if it is there, it replaces the carrier text string, rather than having to be designed around it. One thing to keep in mind, if using this method is that it has to be 10 pixels narrower than the image that might be used on the dialer screen, or it will "shrink" when you switch screens, if you want them to "match".
If anything is unclear, or anyone has any details to add, or corrections to make, please let me know! Thanks
pudgedaddy said:
Just one key...but it has to point to a file that exists. So if you've extracted the .gif file from the .cab / make sure you drop the .gif file in the windows directory and note what the .gif filename is as thats what you're going to put in the regitry entry...also make sure you soft-reset otherwise it won't change until then.
And as far as the in call screen is concerned ... look for a file in \windows directory named cprogback_land.png for your in-call screen
Here's the one that i use: It looks good with technology's another blue color scheme .......Just rename the extention from .jpeg to .png if you want to use it
Click to expand...
Click to collapse
Thanks a lot pudgedaddy we definitely needed better visuals for the call in screen. Does anyone else have any other variations of screens like this laying around?
killswitch said:
...Does anyone else have any other variations of screens like this laying around?
Click to expand...
Click to collapse
One could be made by renaming any wallpaper that would work on the home screen.
I am working on a png one that blends seamlessly with a floating .gif dialpad right now. Must test it out tho'
Here is a trio of images to bring a consistent and mellow dialpad feature to BOTH the dial and incall screens.
Directions
could we do this http://www.youtube.com/watch?v=1IMtkNSjuhQ&feature=related
Definitely would be awesome!
Look here for possible needed files
http://allshadow.com/forum/viewforum.php?f=3
This is so cool! : ).
I can't wait to see it on my phone.
Can "we"? Yes, all the shadow glamour is powered by ( and probably funded 6.1) the funky new silverlight tech that powers Chome.
But do we want nice large photoes and album covers on our home screen? Do we want my fave loading with Flash-like slowness? Some yes, some, not so much...
There is a *load of possibilty in this .1 release, beyond what we've seen so far. SmartPhone Cube? Excalibur-exclusive UI functionality exploiting the unique hardware I assume is only days away, if everyone is as rapid-fire as you, Rick.
Replace * with your favorite word
I think, the people must have a choice, what to install and what is important - performance or effects. This is personal choice, and if there are many variants, technologies, etc, the people will be happy.
You see what happen when sliding panel come - everyone like it! .
The interface on the Juno... which is what you're seeing that in video... IS Chome. It's even the same CLSID on the home screen's .xml... the same GUID's... etc I'm thinking the .dll's are different to make it "special" for the TMobile Shadow (the HTC Juno).
I thought it was just a matter of formatting, like changing the .cpr file or something. I don't think it is so though... as I've searched the file system on a TMobile Shadow phone and couldnt find any .cpr files whatsoever...
All CHome interface in bronze.dll (i think so...)
yep.. true.
this cmhomeaddon plugin is only for portrait screen,and only for neo display style(another display style of chome)
Oh, sh....
Neo have weather plugin, and current CHome - no
Any recommendations for what to pick apart and repack bronze.dll with? ResHack isn't giving me anything too friendly.
Profezza said:
Any recommendations for what to pick apart and repack bronze.dll with? ResHack isn't giving me anything too friendly.
Click to expand...
Click to collapse
use this PE Explorer
PE is much friendlier! Thanks for the tip!
When I replace the images, the file is nearly 4x larger. When I replace bronzeres on the phone it kills Chome-based screens. Is there something I have to do to force a file-size match, or sign it, or something?
Profezza said:
PE is much friendlier! Thanks for the tip!
When I replace the images, the file is nearly 4x larger. When I replace bronzeres on the phone it kills Chome-based screens. Is there something I have to do to force a file-size match, or sign it, or something?
Click to expand...
Click to collapse
unsign the dll first then once done resign
i think it would be real neat to have a shadow interface on the dash it would make the excaliburs unique and for people in the barbershop with the same phone as me can envy lol
It works, it works! And boy, does this quick test version look like crap--- but it works, so I think I will try again, but with feeling now. Woo hoo hoo...
So, how shall we get this working on the same phone with an existing bronzesres.dll? I notice that thehome.xml calls only 2 plugins, iconbar and "Bronze". Anyone know how to dupe Bronze, and have it call the new dll?
Off to Google I go...
Ok, it's closer, and much stronger than the first experiment. In fact, the black is too strong. Back to the 'shop to tweak it again...
UPDATE: Closer still... (#6 & #7)
Got it
Ok, here it is, a nice, dark, but not too dark Sliding Panel set. At this point, it will REPLACE your regular sliding panel's soft translucent white bubble look.
Although a simple script to unload any current Chome-based homescreen and swap the dll's is probably trivial for someone to write (hint, hint), it is not for me.
Directions:
Be running WM6.1, and have Sliding Panel (Chome) working.
Switch to any homescreen that does not use Sliding Panel.
Backup your existing bronzeres.dll
Overwrite with the BrightNight version.
Load a Sliding Panel style homescreen. For best results, use black text and a bright and light background, or a medium text and a dark background for a low output "night mode". Hence the name.
CAUTION: This .dll is experimental. Use at your own risk. Look both ways when crossing the street. Floss. For those of you who didnt follow directions, the original bronzeres.dll is available earlier in this thread. It is in use and cannot be overwritten while chome is running.
UPDATE: Added some bright wallpapers, since they are hard to find around here. © someone else. If you need directions on what to do with them, just skip this whole topic.
That's tight! Maybe we can "join efforts" and make the top of the rectangle darker also, like I did in a previous thread around here. Oh... what do I do with those backgrounds ?!
send me the pic. I was toying around with making a whole new image, if I ever get a day off, too.
Here's a little mortscript package I put together so that the icon displayed in the battery page of settings panel will be active and change with battery percentage remaining.
Just install the cab and then goto program files\battery and run either battery.mscr or battery.exe. This is only one time to get it started, then it should run updates itself and restart itself after a reboot so you can forget about it. Note: if you get a message about the battery file isn't associated with an application, then run the mortscript.exe first and then the battery file.
I only included the rainbow battery images in the cab. The zip files are other battery images packs. To change image packs, download one of the zips and copy the images folder within it over your current program files\battery\images folder. If you want to save the rainbow images, rename the images folder before copying the new images folder over it.
Nice.. I ve always wanted to do this but I never had the time... I ve got some nice PNGs for you to use with about 10 increments
Question though.... do you have to open up some other application that takes the focus away from the homescreen in order to see the battery icon changes.... or not ?
No other app needed, just run the battery.exe one time and forget about it. It only updates and replaces the icon that is already located on the battery/settings panel. This way the icon changes with the percentage more or less shown on the panel. And since the name of the icon in the reg never changes after being set the first time on installation, as you rewrite the icon, no homescreen reload is needed. It just updates automatically. The icon battery packs I got from my ipod touch, which is set up as 17 images for about every 6 percent change.
I just wrote this today so if it doesn't work let me know or feel free to fix and post changes. If you have more icon packs, go ahead and post them. If they're not 17 images, then we would have to slightly modify the script.
nice work man, looking forward to see it!
Great job, Showaco. Will install it and let you know. Keep up the good work.
showaco said:
No other app needed, just run the battery.exe one time and forget about it. It only updates and replaces the icon that is already located on the battery/settings panel. This way the icon changes with the percentage more or less shown on the panel. And since the name of the icon in the reg never changes after being set the first time on installation, as you rewrite the icon, no homescreen reload is needed. It just updates automatically. The icon battery packs I got from my ipod touch, which is set up as 17 images for about every 6 percent change.
I just wrote this today so if it doesn't work let me know or feel free to fix and post changes. If you have more icon packs, go ahead and post them. If they're not 17 images, then we would have to slightly modify the script.
Click to expand...
Click to collapse
You didn't understand me at all. What I'm asking is... does the icon on the homescreen update in REALTIME or is a homescreen "refresh" needed. Let's say you're on the settings page with the battery icon... Let's also say your script replaces the icon with something else RIGHT NOW. Now.. does the icon change in front of your eyes, or will you need to go away from page, or open up another window that covers the homescreen and go back.. to see the new icon ?
I haven't actually sat and watched it when update was running. But I know a homescreen refresh is not needed. I think, and if anyone knows for sure then chime in, that when the icon changes, if you were actually on the battery page, that it would not update in front of your eyes. But if you were on a different panel and the update runs, then you moved to that panel, that the updated icon would be there. I don't think its necessary to go to an app and then back but I will try to check it out and get back to you.
The way my weather app works is, the icon only changes after another app's window gets on top of the homescreen (even if just for a brief second). I'll %100 sure the settings panel will exhibit the same behaviour. Not putting your application down or anything, this is all because I was just curious if you found a way to refresh a static icon in real time...
Do you intend to make a cab for it... etc ?
Ok, I checked out the icon updating by connecting to activesync and writing over the icon while I watched screen.
If you are on the battery page during updating of icon, it doesn't show. If you change pages or panels and back again, then the new icon is there.
If you are anywhere else on the homescreen when update occurs, then the new icon will be there when you look.
There is no need to leave homescreen and come back(like opening an app) and there is no need to reload homescreen for update.
So for clarification, if you're watching the battery icon waiting for the big icon changing show, it ain't gonna happen.
But if you are anywhere else but the battery page, the update happens without your knowledge and it will be there when you look at your battery page. And if you are on the battery page during update, the icon won't change in front of your eyes but it you look a page left or right, a panel up or down, and then look again, it would be updated.
Is that what you mean?
This is only meant as an enhancement to the current battery page, not a replacement.
OrganicM said:
Do you intend to make a cab for it... etc ?
Click to expand...
Click to collapse
Let's try it a day and see if its working. Then, if you get time, could you make a cab for it? I just threw this together today while I was bored at work, and finished writing it after work, so I really haven't tried it out to much. If you got any ideas just throw them in, because I would like to hear them.
Ok, now that I've used it for a day, I have a couple of things to improve upon but overall seems to work fine for me. Has anyone else had time to try it, did it work for you or not?
Dude, I love this
This is great
Nice work, man. I think this is exactly the kind of new addition we all need to out WM6.1. Thanks.
Nice script, but it is necessary to add command RunOnPowerOn("\My Documents\battery\battery.exe")
I was just looking for something like this the other day. I have a set of battery icons from the iphone that I wanted to use, how would i go about making the changes? Or would it be easier just to send them to you?
** oops **
i installed this on a Q9c and it seems to work with the exception of the icons being pinched. Looks like they were resized width-wise to fit in the same area alloted to the original icon area. Is there a way to fix this? Also, can we add an icon for when the battery is being charged?
Battery.exe does not run... it gives me a message saying that its not associated with any program. Also where do i find the runonstartup command?
ThePaleAle, Mortscript installed?
ThePaleAle said:
Battery.exe does not run... it gives me a message saying that its not associated with any program. Also where do i find the runonstartup command?
Click to expand...
Click to collapse
you need latest mortscript to run, version 4.11b7, and can find it here: http://sto-helit.de
For a run on startup, there's two ways to do it.
1: Add a link to battery.exe in windows\startup or,
2; add a line into battery.mscr: RunOnPowerOn("\file location\battery.exe)
awesome guys mortscript worked great
I couldnt find an app so I wrote one.
This small app will give you the option to Save your current Settings or rather Mods to Manila/Sence or whatever you call it.
Im no good at graphics so I need someone to give me ideas on how to make it look better.
It will scan the windows folder for all *manila files that has a different date to the original Rom installation. It will take all these files and backup them to a specified folder. So when you flash and you had special clocks,icons,sliders, etc etc you can simply restore it instead of having to reapply all these custom items.
O yes please install on the Storage Card. Might waste too much space on the Internal memory.
I tested it and seems ok but all apps has bugs so please be nice. Leme know if any body wants the source code. Written in C# VS2008
Version 1.1
Please uninstall the old version. I changed the name to Theme Switcher so it will install into a different folder. You can just move the Backup Folder Across. Got some nice graphics and changed the wallpaper. The Config.txt file have some settings in it. Have a look.
Also Any files listed in extrafiles.txt will be backed up and restored as well so one can easily backup the current wallpaper etc
Version 1.4
Just added an Image so if you add a file by the name of "theme.jpg" in the folder where its backed up to it will show the image before you can apply it
Im sorry I re Uploaded the Cab File forgot to include the txt files.
If the Application Icon didnt show in the start menu its been fixed as well. Please show me some screen shots on a diamond
Version 1.5
Rebuild Cab file
- Icon Shows correctly
- All files included
- Added option to Exit without refreshing TF3D
Version 1.6
- Small Graphical changes
- Added following entries to extrafiles.txt which should backup the taskbar etc as well:
top.png
bottom.png
hdwall_softkeybar.png
hdwall_taskbar.png
homebackground.img
BT Discoverable.bmp
BT On Mode.bmp
BT Stereo headset.bmp
GPS-icon Mask.bmp
GPS-icon.bmp
HTCVolumeControl.dll
MMSRes_480x800.dll
outres.192.dll
phcanOverbmp.dll
shellres.192.dll
Stereo headset.bmp
tapres.192.dll
notify.dll.0409.mui
notify.dll.040C.mui
CDMA_RSSI_PPC.dll
WLMMessengerResources.192.dll
Stereo headset Mask.bmp
tshres.192.dll
PictureMailRes.dll
BT Stereo headset Mask.bmp
BT Discoverable Mask.bmp
BT On Mode Mask.bmp
shellres.192.dll.0409.mui
VoiceCmdRes_PPC.dll
htcStartMenuService.dll
LargeTitleBar.dll
NotificationManager.dll
Spare
Just a spare post incase of sumting
Move
Can a Mod please move this thread to Software development please
THANK YOU
Grumps, great job I love this app. Simple and works great.
I will be using it, not only as a theme saver, but also as a theme changer.
I just tried it to switch themes and it worked great.
I haven't used it much yet, so I don't have much feedback.
The only thing that I have come across that needs fixing is that the drop down list for the restore saved theme.
It is hidden behind the restore saved theme button.
Everything else works great.
Thank you so much.
Wouldnt i be nice to save phcanover & the other dlls with icons, too?
Seems to be a great app that will save me a lot oft time,
thx³
Greetz
Boris
howzeet
Phonatic said:
Grumps, great job I love this app. Simple and works great.
I will be using it, not only as a theme saver, but also as a theme changer.
I just tried it to switch themes and it worked great.
I haven't used it much yet, so I don't have much feedback.
The only thing that I have come across that needs fixing is that the drop down list for the restore saved theme.
It is hidden behind the restore saved theme button.
Everything else works great.
Thank you so much.
Click to expand...
Click to collapse
what phone did u try it on . i made it on my rhodium. if its a vga device ill fix it. have a diamond as well that ill try it on
borisku said:
Wouldnt i be nice to save phcanover & the other dlls with icons, too?
Seems to be a great app that will save me a lot oft time,
thx³
Greetz
Boris
Click to expand...
Click to collapse
i can do that if you can gimme a list of the files. or maybe i can create a text file and one can list all the files in there that it should include in the backup? does anybody know which files contain the wallpaper and the top and bottom bar. guess its called the taskbar. the ones thats part of the top icons and bottom buttons. then it could be a complete theme changer. i use it as that as well
Grumps, thanks for the app. I believe that I am having the same condition that Phonatic describes. I have a Rhodium with stock rom, manilla 2.1.
But that shouldn't matter, should it?
My screenshot has differences from yours, aside from the bottom bar difference between your sense and my manilla.
Mine has the top task bar and less space between the drop-down list and the "restore saved theme" button.
Also mine has nicer looking buttons.
Do I have the wrong version?
When you have more items in your drop down list, does your list stay above the button?
I still am using it. I just use my arrow down/up to make my selection.
Grumps, as a suggestion to fix the problem that I have,
would it be easier to adjust the layout?, than to change the drop down to render in front of the buttons.
Something like this.
Also, since you asked for graphic suggestions, what do you think about making all the buttons have the same look.
Another suggestion is for your startup.jpg.
Instead of your screenshot, which is very nice, how about something that displays the program name and authored-by info.
With a "tap screen to proceed" kinda instruction placed somewhere.
Here are quick mock-ups of the idea that I am trying to convey.
I'm actually using it for your app, they look good on my Rhodium, much better than this screen shot.
I used screenshots from this site to make these mock-ups. Thanks to the OPs.
If anyone minds that I used their image, please let me know and I will replace it.
Anyway, just some food for thought.
Thanks again for the great app, Tilt
This awesome and such a time saver, thank you so much! One thing is I can not delete theme i have saved, I store on storage card but it says I can not delete it is denied other than that it is exactly what I have been looking [email protected]
Thank you for this program!
Tilt ommarow said:
Grumps, as a suggestion to fix the problem that I have,
would it be easier to adjust the layout?, than to change the drop down to render in front of the buttons.
Something like this.
Also, since you asked for graphic suggestions, what do you think about making all the buttons have the same look.
Another suggestion is for your startup.jpg.
Instead of your screenshot, which is very nice, how about something that displays the program name and authored-by info.
With a "tap screen to proceed" kinda instruction placed somewhere.
Here are quick mock-ups of the idea that I am trying to convey.
I'm actually using it for your app, they look good on my Rhodium, much better than this screen shot.
I used screenshots from this site to make these mock-ups. Thanks to the OPs.
If anyone minds that I used their image, please let me know and I will replace it.
Anyway, just some food for thought.
Thanks again for the great app, Tilt
Click to expand...
Click to collapse
Wow I like this. Think its a good idea. Maybe I should change the Name to Them Switcher. Dont you wanna do the images for me with the name Theme switcher? I dont know quote how to do all this but ill try and make graphics work as button thingys. Leme see what I can do.
Tilt ommarow said:
Grumps, thanks for the app. I believe that I am having the same condition that Phonatic describes. I have a Rhodium with stock rom, manilla 2.1.
But that shouldn't matter, should it?
My screenshot has differences from yours, aside from the bottom bar difference between your sense and my manilla.
Mine has the top task bar and less space between the drop-down list and the "restore saved theme" button.
Also mine has nicer looking buttons.
Do I have the wrong version?
When you have more items in your drop down list, does your list stay above the button?
I still am using it. I just use my arrow down/up to make my selection.
Click to expand...
Click to collapse
Cool ill fix this
Thanks
Grumps said:
Cool ill fix this
Click to expand...
Click to collapse
I will patiently wait for the fix. It still works as is.
By the way I like the taskbar showing on top.
Would you please do me the honor of putting this Startup.jpg on your Rhodium.
I just want you to see how it looks on the phone.
The screenshot just doesn't do it justice.
@anyone that wants to see how this looks on the phone, just right click on the image,
save as Startup.jpg and use it to replace the one in your phones Theme Saver folder.
Tilt ommarow said:
I will patiently wait for the fix. It still works as is.
By the way I like the taskbar showing on top.
Would you please do me the honor of putting this Startup.jpg on your Rhodium.
I just want you to see how it looks on the phone.
The screenshot just doesn't do it justice.
@anyone that wants to see how this looks on the phone, just right click on the image,
save as Startup.jpg and use it to replace the one in your phones Theme Saver folder.
Click to expand...
Click to collapse
Ihave and I am using it. Im batteling to make it look right on Windows 6.5 and 6.5.3 because of the topbar being smaller and bigger. Can you also give me one without any writing eg theme switcher and save/restore/switch and press any key. Trying to use it as a background image for the app and moving the controls to the menu items
Grumps said:
Ihave and I am using it. Im batteling to make it look right on Windows 6.5 and 6.5.3 because of the topbar being smaller and bigger. Can you also give me one without any writing eg theme switcher and save/restore/switch and press any key. Trying to use it as a background image for the app and moving the controls to the menu items
Click to expand...
Click to collapse
I will alter it however you like.
I have time tommorow. For now I must get 3hours sleep before I go to work.
Here is a background.
Goodnight, Tilt ommarow
Tilt ommarow said:
I will alter it however you like.
I have time tommorow. For now I must get 3hours sleep before I go to work.
Here is a background.
Goodnight, Tilt ommarow
Click to expand...
Click to collapse
You got a private message. Thanx for the image
What do you think of these buttons?
Here's a template that I made for you.The dimensions are exact to the current layout.
If you were to replace the current background with this, it would be functional.
Some graphics should be added, especialy to brighten the lower section.
The size of the top button looks off, I suggest either make it bigger to match
(which would look crowded with the task bar, unless you lower everything),
or I can change it into a text box or no box just text.
Do you need text added, or is the text part of the app?
Anyway, just let me know your preferences ie graphics, text, color, button style etc., and I will adapt accordingly.
Tilt ommarow said:
Here's a template that I made for you.The dimensions are exact to the current layout.
If you were to replace the current background with this, it would be functional.
Some graphics should be added, especialy to brighten the lower section.
The size of the top button looks off, I suggest either make it bigger to match
(which would look crowded with the task bar, unless you lower everything),
or I can change it into a text box or no box just text.
Do you need text added, or is the text part of the app?
Anyway, just let me know your preferences ie graphics, text, color, button style etc., and I will adapt accordingly.
Click to expand...
Click to collapse
This looks very nice. The reason why there is such a big gap at the bottom is that im not sure if it will all fit on a vga device. The buttons look nice. I also cant use it as is because on different device with different os's like 6.1 6.5 6.5.3 the image moves slightly up and down. so you will have to include the images with the text on it, as individual images and they have to be square cause i dont know how to program transparency as yet. Hope it would be possible. Thanx soo much for the effort so far It looks awesome
Grumps said:
This looks very nice. The reason why there is such a big gap at the bottom is that im not sure if it will all fit on a vga device. The buttons look nice. I also cant use it as is because on different device with different os's like 6.1 6.5 6.5.3 the image moves slightly up and down. so you will have to include the images with the text on it, as individual images and they have to be square cause i dont know how to program transparency as yet. Hope it would be possible. Thanx soo much for the effort so far It looks awesome
Click to expand...
Click to collapse
Grumps, I just read your pm. Gimme a minute. I think I have something for you.
Thanks for the info above.
As I understand it, you need buttons with text and the background seperate.
I am uploading a file for you. Please let me know how these work for you.View attachment Grumps.zip