I can upgrade everything BUT the radio ROM on my BlueAngel.
Anyone else ran into this? I've tried every radio ROM version I can find, but it fails every time giving an error dialog instructing to contact the vendor. After this, the entire unit is locked until I flash the ROM and ExtROM again. I really need to update the radio portion because I'm getting complaints about the well documented "echo" problem these units with older ROM versions are prone to. FYI, in case it matters, I've been using the unit with a Cingular SIM. HELP!!!!
Model: PH20B
ROM: 1.40.00 WWE
ExtROM:1.40.176
Radio ROM: 0.91.00 (Can't update this)
I am unable to upgrade radio ROM on my O2 XDA Exec (SIM-free).
When trying to upgrade radio rom from either the bootloader or OS itself, the upgrade process stops at 0% and after 2-3 minutes I get the “error 114: Radio rom update error”. Tried advices found in http://forum.xda-developers.com/showthread.php?t=296901 and http://forum.xda-developers.com/showthread.php?t=296393&page=2, but to no avail.
I'd like to point out that my problem is slightly different because I have not able to upgrade radio ROM at all and the rom the device came with is still working.
Currently the device has Jwrightmcps's Crossbow ROM 2.02.00 (installed without the radio part and v1.01 bootloader. Radio ROM version 1.04.02.
Any help would be highly appreciated.
ubigene
Dear all,..
Since I unlocked my MDA-PRo sim lock with the Buzz sim unlocker i'm experiencing radio problems.
I've tries almoast every ROM incl radio Roms. Still nu success.
The problem is that I do have a radio connection, but it keeps disconnecting when Im roaming. The GPRS connection keeps disconnecting, the radio signal disconnects when driving in my car. In the same road my work phone has no problem, only the Exec.
Before the Unlock there was no problem, after unlocking there is. Yesterday I re-unlocked my MDA-Pro with the BuzzDev unlock tool V1. sTill the same problem, not a steady radio signal...
Please advice...
Arjan D.
Hey I have the same or similar problem I have done all the prosses to ulnlock it ....now the radio version is 0.00.00 and i have already run the exe that it supposed to make the radio 1.whatever but still 0.00.00
could you please give me a and with this ??
thanks
After changing radio version into 0.00.00. with HTC_Uni_Unlock_v1. It is impossible to upgrade radio version of Exec with MaUpgradeUt_noID.exe.
I have upgraded radio version of my Exec with ROMUgradeUt.exe sucessfully. No any problem.
The problem isnt upgrading, but disconneting the radio signal several times a day. And when the radio signal is back again, the GPRS connection won't establish automatticly.
Before I userd the Sim unlock tool there weas no problem, but now when my MDA-Pro is unlocked there is...
I've unlocked my phone 1 year ago, since then I'm experiancing this problem. I've really tried almoast every rom, and every radio rom. Still no success...
Can someone tell me which rom (doesn't need to be a WM6 rom) including the radio rom is the best for the MDA pro?
thanx in advanced...
Arjan
Actually I am using Rom PV 2.10.07 and radio 1.15.00, my device is working normally.
Hello to anyone who can help me...
i am posting this thread after searching this forum for answers to my problem, and i could not find the answers...
I have the Diamond (DIAM100) with Original SPL 1.37.000 and GER Stock Rom installed.
My Upgrade goal is HardSPL 1.38 Signed (Olinex) / DiamondProject V2 GER / radio .05
I try to upgrade SPL, Radio and Rom according to several guides in this forum, but nothing seems to work for me.
I tried using the RUU Program with HardSPL, tried Diamond CustomRUU, tried manual Bootloader access, everytime the Upgrade Software stays at 0% (on the phone also) and after about 5 minutes i get ERROR [262].
Luckily, i haven't bricked my diamond yet, it always came back to life again.
i can confirm, that the device enters bootloader mode, then changes to grey screen with progress bar. But that is all.
Maybe it is a Vista issue, maybe not.
But all i get is ERROR [262]: Update Error
Suggestions, anyone?
Thanks in advance for any serious help...
______________________________________
HTC TD DIAM100
MDA Compact I (Magician, unmodified)
MDA VarioII (Hermes, running Schaps 3.54GER, thanks Schaps great ROM)
I get EXACTLY the same... i've tried everything (except a hammer) to fix it.
I'm running
Rom: 1.37.707.1 wwe
Radio: 1.00.25.03
Proto: 52.26a.25.09h
I'm also using Vista 32
(all fresh out of the HTC box)
http://forum.xda-developers.com/showthread.php?p=2338991
Are you running Vista X64 coz i had the same error in it ..
try to flash it with xp!
udayrulz said:
Are you running Vista X64 coz i had the same error in it ..
Click to expand...
Click to collapse
... Running Vista Ultimate 32bit, but not sure if that will make a difference...
I will try to get hands on XP computer tonite....
You can always try running the RUU update utility in WinXP32 compat mode.
What Hard SPL ar eyou using???.... usually the problem...
you will need Developer edition if the ROM is not signed.
developer edition worked for me on Vista 32. Thanks guys!
OK
I ran a Hard-SPL (from the dev thread) Diamond-OliNex
This completed and did whatever it did and i had to do the basic setup on the phone again.
I have now got the radio ending .06 from this thread this thread and cant get it to work with the OilNex Hard SPL or the 1.34 listed in that thread.
I'm back to square one where Error 262 Update error is occuring.
I'm tring to flash the radio as the O/S i have appears to be running sweet but its having web issues that appear to be DNS/Connection related.
This needs an idiots guide like the other phones have .... 'coz i'm an idiot and I can't do it.
Monty Burns said:
OK
I ran a Hard-SPL (from the dev thread) Diamond-OliNex
This completed and did whatever it did and i had to do the basic setup on the phone again.
I have now got the radio ending .06 from this thread this thread and cant get it to work with the OilNex Hard SPL or the 1.34 listed in that thread.
I'm back to square one where Error 262 Update error is occuring.
I'm tring to flash the radio as the O/S i have appears to be running sweet but its having web issues that appear to be DNS/Connection related.
This needs an idiots guide like the other phones have .... 'coz i'm an idiot and I can't do it.
Click to expand...
Click to collapse
Yeah, but for me the problem still is to get ANY HardSPL on the Diamond in the first place.
I was trying to put HardSPL 1.38_Signed to the phone...
Adwinp: thanks for the advice, but did not work either...
As far as i can tell, this may be a problem with the USB driver from the Windows mobility center software...
I will try on real XP and give you feedback tomorrow.
thanks guys.
Doctor_Who said:
...
I was trying to put HardSPL 1.38_Signed to the phone...
...
Click to expand...
Click to collapse
The developer edition i.e. unsigned worked for me.
I am currently going through the stages in the wiki VERY closely. Dont know if they will work :/
Doctor_Who said:
Hello to anyone who can help me...
i am posting this thread after searching this forum for answers to my problem, and i could not find the answers...
I have the Diamond (DIAM100) with Original SPL 1.37.000 and GER Stock Rom installed.
My Upgrade goal is HardSPL 1.38 Signed (Olinex) / DiamondProject V2 GER / radio .05
I try to upgrade SPL, Radio and Rom according to several guides in this forum, but nothing seems to work for me.
I tried using the RUU Program with HardSPL, tried Diamond CustomRUU, tried manual Bootloader access, everytime the Upgrade Software stays at 0% (on the phone also) and after about 5 minutes i get ERROR [262].
Luckily, i haven't bricked my diamond yet, it always came back to life again.
i can confirm, that the device enters bootloader mode, then changes to grey screen with progress bar. But that is all.
Maybe it is a Vista issue, maybe not.
But all i get is ERROR [262]: Update Error
Suggestions, anyone?
Thanks in advance for any serious help...
______________________________________
HTC TD DIAM100
MDA Compact I (Magician, unmodified)
MDA VarioII (Hermes, running Schaps 3.54GER, thanks Schaps great ROM)
Click to expand...
Click to collapse
I had the exact same problems. I tried every possible combination of Hard SPL and ROMs. Here is what worked for me in the end (no problems since):
1. install newest .Net 3.5 on windows PC (don't know if this has anything to do with my problems but after installing everything started working fine)
2. install Unsigned HardSPL (developer edition): http://forum.xda-developers.com/showthread.php?t=400950
3. install chosen ROM / Radio ROM with RUU (Rom Updater Utility): http://forum.xda-developers.com/showthread.php?t=396073
After flashing a ROM the device makes a hard reset so you should backup your data first! http://forum.xda-developers.com/showthread.php?t=299705
good luck!
Finally it worked, also thanks to all who replied in this thread.
So i like to share my experience in this:
1. first i downloaded all SPL and Radio i could find, then i looked for GER language Rom. Quickly decided for DPT V2.
2. First attempt to flash failed completely on a Vista PC (32 Bit Ultimate)
3. Back home, moved all the downloaded files to my XP SP2 PC..
4. Noticed: DiamondCustomRUU would not start in XP, got error message saying "... could not be initialized", so i tried the standard RUU instead, with the shortcut of manually putting the PDA into Bootloader mode...
5. Sucessfully flashed HardSPL 1.38 on the Diamond, and the device rebooted with Hard reset.
6. Next i tried to upgrade Radio to .05 Version... Failed, stuck a 0%
7. Changed SPL to 1.40 (Unsigned), now the Radio could be flashed. Seems that Radio Files are Unsigned?
8. Flashed DPT V2. Success.
But still wondered about the unsigned Radio file...
Again, thank you all
-------------
I followed the instructions on upgrading my Universal to Wm6.1 (Ranju's v7.7) which included downgrading the Radio version to 0.00.00. Upgrade went fine for the most part but Bluetooth isn't working now and when I try to turn it on or discover another device I get a "bluetooth hardware error" message.
My radio version still shows up as 0.00.00 as there was no radio.bkf file in Ranju's update (I'm assuming) so should I install a new radio-only ROM and if so which version and where to find? I did a few searches on the forum but ended up going round in circles! Should this solve the BT problem?
Also can I just install the new radio ROM "on top" of the WM6.1 upgrade or will I need to do it all over again?
Just to let everyone know, after much reflashing and rebooting of both OS and Radio, I finally managed to get it to work by stopping the Extended ROM installation adding on all the O2 crapola after the initial ROM install. Might be useful info for anyone else having this issue in the future ...
i dont understand what its the O2 caprola, what did you do exactly because i have the same problem after i upgrade to WM6