Hi all,
I have my mda-pro for a while now, and had some problems with it... After searching this forum(great forum) i found there were some fixes. After trying these fixes and still had some problems i decided to upgrade my device with the this rom ftp://xdaupload:[email protected] ROM update for MDA pro, january 2006.zip
After i upgraded my device was faster and more stable, but found 1 issue i can't find the answer for on this forum. (by the way if you have problems like device hanging etc this rom will help you it was my life saver... )
The issue i have is that with my older t-mobile rom i could make a call and use gprs/umts together, but after the upgrade grps/umts is disconnected when i get a call or make one. :evil:
Is there a reg tweak to stop this, i find it verry annoying that i can’t check my mail when i’m on the phone. When people who I’m in a converance call with and saying I mailed the info to you I have to disconnect my call open/check my mail and call them back verry verry annoying… :evil: :evil: :evil:
Thanks for the help
Doesn't anybody know????? :shock: :? :?
Related
Hi!
I have a problem with my QTEK9090. From time to time when either myself or caller calls to my PPC we can not hear anything! When I try to call back immediately the same procedure occurs. The only thing that temporarily solves this is then I do a soft reset of PPC. Until next time.
I have upgraded from original version 1.12.00WWE to 1.22.00WWE and to 1.40.00WWE. I got a beta version from technical support for radioversion (1.13.10) but without any success. I also have got a new SIM card.
Any ideas?
i have the same problems, and the same sys op... and i had applied all patch...grrrrrrrr :evil: :evil: :evil:
Is your BT on? If not turn it on and leave it on.
good luck
Hi!
Thanks for your replies. I will leave the BT on today and check any differences. Have you had the same problem yourself?
Hi!
matrix70 which version are you running? Have you tried different versions? Have you tried to contact technical support or Telia for this problem?
i'm italian and i bought ba in greece. I just have upgraded with 1.40wwe version, applied all patch...but the proble still here...grrr..i discover that it's coming when i try to use ba in fastest mode.. switching from an application to another in a very fast mode, or trying to recall quickly a number that it's busy.
matrix70 from version did you upgrade from, do you remember?
same problem here, i did read in another thread that this is a known problem and can only be solved by moving to wm5.
I have radio version 1.06.02 and will move to 1.11.00 to try my luck
now i have update from 1.40 to 1.42 and the problem it's seem disappeared.... but with this version i can't sync my calendar....wath a lolling problem ....
I have run with BT on for some days and the phone problem is not occured once.
Great to here that problem with phone is solved in next version.
I remember there was a thread a few months ago I think. I had the same problem when I got my IIs last July, but I just turned off the BT and up to now theres no prob..... I havnt upgraded my version yet, I still use the 1.31 coz everythings working fine
Search the forums for Unidirectional Audio patch. This will fix the problem. But you probably do need the 1.40 series ROM.
im having the same issues, anyone know how to fix it up???
sometimes cant make or receive calls till i make soft reset.
thanks in advance.
im running rom 1.40.
couldn't find "Unidirectional Audio patch"
anyone have any idea where can i find it? and if its really fixing this annoy problem
thanks in advance.
Hi!
You can find the patch here http://wiki.xda-developers.com/uploads/PDA2k_UniDirectional_Patch.sa.cab). It didn't help me at all. I still have problem when BT has been activated nextcoming calls I still can't here or the caller can here anything. The only thing that have helped me, from a tip in this forum, is to always have BT activated.
Regards,
Fredrik
Thanks for the answering m8.
I actualy have been experimented these issue with bluetooth off...
just tryed with bluetooth actived all time and seems to be working.. anyway don't like this fix at all .. consuming extra batery to make the phone working properly is ridiculous
i will try out the fix anyway.
Thanks.
there was a pollon here about this a few months back and 76% of the users in this forum experienced this problem to some degree. Never found a proper fix.
how come manufacturer companies havent take notice yet? or iven the supplied the proper fix to this? is a very important issue...
other licenses than Qtek 9090 got the same issue??? pda2k? and the other clones???? know about it???
for the moment i have to say by enabling bluetooth all time as working well so far ...
Hello there,
there are 2 big problems i have found with my Qtek 9090 since i bought it about 3 days. Its kinda soon to find out this big bugs, so i would like to know is these are general people issues or they are happening only to myself...
1.- somehow after some standby time, i can't hear neither do the caller hear what im saying tru a conversation. This is solved by soft reset the device... also founded in this forum that by enabling bluetooth all time, this issue can be ignored and the phone works quite well... (stable)
2.- when im connected to GPRS, speak about MSN, IE or Mail .. and i make a call (don't iven make the call during 5 seconds) i imediately lost the GPRS connection and wont be able to reconnect to it ... i always receive an error saying " unknown error found ... try to reset the device as the owner manual indicates .. something like this... "
in fact i have to soft reset each time to get GPRS working again.. and im really sad by doing this all the time ... but i dont know if anyone else has this problem, please let me know any information that could be helpfull, i realy apreciate.
Thanks in advance.
Rodrigo Ventura R.
I had the same problem with not being able to be heard during a call. I upgraded my ROM and the problem went away.
Not sure about GPRS.
i have qtek 9090'... in
spanish... what rom should i download. actually
have rom 1.40.
thanks in advance.
I would try this one:
Qtek ESN DANGA304 1.40.03 1.40.158 1.12.00 Download Thread 2
from wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Follow wiki for installation walkthrough
I have a a Qtek 9090 with latest WM5 on it and i have a big problem with my incoming calls if my devide it's off and someone calls me only ather the 4th or 5th ring i start to see and hear my PPC ringing if my device only has the light off and someone rings my PPC start to ring imediatly.
Does anyone have any ideea or solution about this ?
What versions of Rom are you using, did it came with the 9090 or have you upgrade it? The Rom version of your 9090 could be the problem, try to upgrade it (but be very very carefull as upgrading is a very sensitive proccess)
Let me know
GoodLuck
Sidd
The version i got it didn't come by default i have the latest one which i took from the forum WM5 TuMa 1.3 yesterday i did a full flash with it again and it's a little bit better but no big difference
Hi Miker,
Try to install "SPB Tips & Trick", its a tweaking software for all these sort of problems. I did have the problem with my Alarms, my alarm was not working if my phone is in sleeping/standby mode, but this software has fixed this problem. Try to download the trial version, install it on the phone (not on Memory card), and let me know if this would fix ur problem.
Good Luck
Sidd
http://www.spbsoftwarehouse.com/products/tipsandtricks/?en
I have reflashed it and it work almost perfect just 1 second latency but I have also installed that program you told me about i'm searchin' now for a serial or keygen
Hi,
i am facing this weird issue of certain calls that come into my Hermes (now flashed with K's Lite ROM and 1.48.00 Radio) appearing on call history as a future event like a call that I'd receive on 10 am (current time which my PDA is set to) today would show the time1.30 pm today!!!! These items always sit first on the list and redialing becomes an issue. :confused
It's not happening with all the calls, I suspect if it's the calls that I receive while the phone's on standby.
i used to have this issue in some other ROMs too and am not too sure if it's a ROM thing. I downgraded from WM6.1 to WM6 to check this. Need help badly on this Thanks.
Riyaz
Could someone pls help???
Can some one Pls tell me what to do.. need Ur help badly
Rgrds
Riyaz
Ill think it could be a bug in your "old" rom.
Just flash:
1. official AT&T WM6 Rom
2. Radio 1.54.30.10 (best one i have ever tested)
3. PDAVIET WM6.1 19400 (or 19209) Black & Clean Rom
Ill now running the 19209 for about 2 Weeks without any problems and its horrible fast
cu
pOpY
Thanks
Hi popy2006,
Thanks for the info pal.. I am a great PDAVIET fan myself for prophet... Cloudyfa has ensured that I still havent thrown away rophet and seems never will
i've tried black and clean and green and clean before but both gave me serious hard resets (evenafter AT&T flash)
so thought I'll go back to the WM6.
thanks for the info anyway
Riyaz
Hi. Try to disable SD Card Power Management. I have found an other thread here: http://forum.xda-developers.com/showthread.php?t=378750
Whis guy have the same problems. After deactivating the SD Power Management, his ROM running quite well.
Hope this helps you.
cu
pOpY
Seems working - testing Now
Hey pal,
seems to work testing now... Hope this stays same Thanks
riyaz
hi, i have a tytn II , when i make a videocall to any device who supported 3g this answer me like a voice call. And if any device want make a videocall to me the dial signal is present, but I don't see anything on my device. please help me, cause i cant find any solve to my problem !!!!
man, tytnII does not equal to hermes, need to post at right forum if you want help.
This is the 3rd or 4th I've seen coming to the wrong forum for help in the last couple of weeks.... It's sad they don't know what device they've got....
sorry , i've got the right way