Related
Hi All,
First of all, credit goes to the original ROM author - jasjamming
Based on the Black v3.0.1, I have changed the following:
- Remove English SIPs (Letter Recognizer, Block Recognizer etc).
- Set Keyboard SIP as default.
- Included Windows CHT IME (M$ Phonetic & Chajei).
- Included Windows CHS IME (M$ PinYin).
- Included Windows JPN IME (M$ Kana & Romaji).
- Included PIM Backup v1.9.0.0
- Added CommManagerVibrateFix.
- Applied WM VI Black Update BT Drivers.cab.
- Added mingliu font, change wince.nls for Chinese/Japanese/Korean support (Korean need proper fonts).
- Added ClearTemp v0.9.2.4.
- Enabled NITZ time sync by default.
- HTC X-Button/Task Manager updated to v1.5.
- Replaced IA_Zip with PocketRAR v3.6 (freeware)
- Added VistaHide Battery Bar.
- Added SIP_CHT, SIP_CHS, SIP_JPN cab files for change SIPs (located in \Windows\)
- Replaced built-in MobileCalculator to Eval.
- Upgraded Office to 2007 version. (support docx, xlsx, pptx etc)
I've also included 3 cab file in the \Windows folder -- SIP_CHT.cab SIP_CHS.cab SIP_JPN.cab
Please remember to install one of the cab file to enable the inputs (soft reset after installation), otherwise only english input is available.
For additional programs (eg, VOIP, MSN Messenger), please visit the original black thread.
For chinese description or screenshots, please visit:
http://blog.yam.com/leo2016/article/10104618
Download:
http://www.sharebig.com/d/spxowmtll/0t9cFGM464C682B0E/Black_v3.0.1-CCS.zip.htm
(password: [email protected])
or
http://www.megaupload.com/?d=OAF20XT6
great thanks
looking forward to try this one out! thanks!
Thanks a lot for this new rom release
Any Traditional Chinese Handwrite Input function?
Thanks
As Ricky said, i would also like to thank jasjamming first...
now..
THANK YOU THANK YOU THANK YOU Ricky. Your solution is the only one that works stably for reading chinese... again, thank you very much!
Hi Ricky
I just installed the rom, and I notice that the font size is funny. The default size for the menu item does not change even if i change it in the screen adjustment screen (Settings-> system -> Screen). This does not happen with your old rom...
Thanks!
Slider
HKFreak:
Sorry that I did not include any of the handwriting software this time, I was trying to create a cab file for the Handwriting, however, everytime I installed the cab file I made the touchscreen would stop function (need to use hard reset to fix).
I'll find a solution later on... (oh well... maybe it's time to try 3rd party inputs )
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
X01HT Installed and Working Well!
Well done Ricky, awesome job. I found the Japanese input pretty painful, as it didn't have the correct romaji option, instead the layout for a true Japanese keyboard, which the X01HT doesn't have.
I used Asukal's one (tried to upload, but no go) and that is exactly as it should be. You might look at replacing your's with that one.
I will let you know how it goes as I run it through its paces, but its looking impressive so far.
Now where's the Black 3.5 version
Thanks, got it!!
Sorry, got it, thanks
thanks to you and the original rom chef jj. would like to know is 簡易 input method included?
RickyLan said:
HKFreak:
Sorry that I did not include any of the handwriting software this time, I was trying to create a cab file for the Handwriting, however, everytime I installed the cab file I made the touchscreen would stop function (need to use hard reset to fix).
I'll find a solution later on... (oh well... maybe it's time to try 3rd party inputs )
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
Click to expand...
Click to collapse
Mind if you post the cab file here? I need the CHT hand writing indeeded!!!~
RickyLan said:
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
Click to expand...
Click to collapse
Thanks Ricky.. I notice text break problem too, and this happens even with regular English rom + CE-Star.. so I guess we can only choose no line breaks, or weird font size... :-\
I've been runing the ROM ever since it went up and haven't had to do a reset yet, whereas with the straight Black 3.01 with the hacks to get it using Japanese, I found myself resetting 5 or more times a day.
Thanks for a great stable release!
Is this rom built up from black 3.0 insted of 3.01?????
I found the Black 3.0 bug still on this ROM....
1) today theme cannot be changed(only Top/Under Bar can be changed)
2) symbol pad cannot be loaded.
how to use korean
I want use korea.
how can i use korea language.
The Voice Command button also disabled. Any idea how to enable it?
And is it possible to set the default input from '拼' to English? (For both keyboard and soft keypad) Thanks!
Ricky, can you post the Japanese SIP cab file on its own?
I'm trying to muck around with Black 3.5. and the Asukal one I've been using up until now doesn't want to work properly.
flashed this no prob. used it to replace 3des + CE Star, which was a very unstable combination.
this is working great. fine job Ricky, and also to whoever did black. Nice ROM. I love my phone again.
anyone know where there is a manual on the input methods. they take some getting used to after CEStar, a manual would help.
hamster0914 said:
Ricky, can you post the Japanese SIP cab file on its own?
I'm trying to muck around with Black 3.5. and the Asukal one I've been using up until now doesn't want to work properly.
Click to expand...
Click to collapse
Really , just can't enable kansaku & tegaki. On 3.5 & all the new released roms.
Yes. All versions > 2.5 seemed not support SIP switching.
I guess some REGISTRY changed.
I switched to LVSW two weeks ago.
It works great!
Cedricguo said:
Really , just can't enable kansaku & tegaki. On 3.5 & all the new released roms.
Click to expand...
Click to collapse
Hello,
i wont write czech characters on slide keypad (áčďéěíňóřšťúůýž).
Now i my write all chracters, except ď,ň,ř,ť,ů,ž.
Example..
On slide keypad i press "r" then press "FN key" then press "Space" = ř (now ®)
Please help me.
I know these guides, but dont work in my TyTN :-((
Italian settings
Swedish characters on keyboard
Restore local language support for sliding keyboard after upgrade to a different language ROM
List of Locale IDs, Input Locale, and Language Collection
I have in my TyTN:
Windows Mobile 6 Black Shadow (4.0)
ROM version: Black-IV-Shadow
ROM date: 05/10/07
Radio version: 1.41.00.10
Protocol version: 32.74.70.20.18H
Thanks all, LaPEPE.
sym.txt
Edit your sym.txt in Windows directory. It contains symbol sequences for each letter/key. For Czech it could be something like this:
aáä
AÁÄ
cč©
CČ©
dď
DĎ
eěéë
EĚÉË
ií
IÍ
lľł
LĽŁ
mµ
Mµ
nň
NŇ
oóö
OÓÖ
p¶
P¶
rř®
RŘ®
sšß
SŠß
tť™
TŤ™
uúůü
UÚŮÜ
yý
YÝ
zž
ZŽ
$€£¥
/\|
"'«»
([{<«
)]}>»
+±&-_
!?
.:,;
*^°#
@~§
%‰
Smart Dial Feature
in the smart dial - when pressing the numbers/letters the phone shows corresponding names containing pressed letters, but does not show names that have some "special" central european letters like "ľščťžýáíé". (I don't know if eg. french letters work)
Where or how could I set it - if possible?
I have same sym.txt file as jixxie, but dont work.
I dont write on hardware keypad ř i can only r or ®.
Have you any idea??
LaPepe.
How do I get this dialer for my HTC P3300? I recently purchased this phone which came with a wm6 os installed and it has the native smart dialer.
However, i would like to have this dialer.
Please help
cheers
Burjis
Install, before In registry HKLM > Security > Phone > Skin
Change Enabled from 1 to 0
And reboot
Thanks but could you please elaborate on this registry thing... i am new with the registry edits etc...
cheers
Burjis
Install this editor.
Couple of simple steps
Ok here a couple of simple steps for you.
1. copy the attached Areo_Dialer.cab file to your xda (Its not exactly the same dialler skin as the one you posted but its as close as i could find), tap it from there and it will install.
2 if you dont have a registry editor, use the one tabarda has provided.
once you have installed both (the Areo_Dialer.cab & Registry Editor) open the Registry Editor, go to HKEY_LOCAL _MACHINE > Security > Phone > Skin > then change Enabled from 1 to 0.
Then do a soft reset and it should now have the dialpad you requested.
hope this helps
Wooley
Thanx a ton... u guys are too good...
cheers
Burjis
NO, no, they are wrong! (just partly...)
There is NO NEED TO INSTALL ANYTHING! The picture in the first post shows the original WM6 dialer that comes built-in, by Microsoft. But you usually cannot see this, because or HTC either the branded versions put their own dialer skin 'above' the original one.
So, the only thing to do: obtain a registry editor (the posted one is OK), navigate to 'HKEY_LOCAL_MACHINE / Security / Phone / Skin' and change the value of 'Enabled' from 1 to 0. Then soft reset and voilá: you will see exactly the same dialer like in the picture.
thats what i thought? i think theres a post on it which i asked the same thing in meschles 2.1 touch rom
but if you want to divert back to the other pad do you just edit to 1 again and soft reset?
i just did this and nohting changed? i have the same dialler that you get with the touch 2.1 wm6 mechle's rom?
ctibor said:
NO, no, they are wrong! (just partly...)
There is NO NEED TO INSTALL ANYTHING! The picture in the first post shows the original WM6 dialer that comes built-in, by Microsoft. But you usually cannot see this, because or HTC either the branded versions put their own dialer skin 'above' the original one.
So, the only thing to do: obtain a registry editor (the posted one is OK), navigate to 'HKEY_LOCAL_MACHINE / Security / Phone / Skin' and change the value of 'Enabled' from 1 to 0. Then soft reset and voilá: you will see exactly the same dialer like in the picture.
Click to expand...
Click to collapse
thats precisely what I did - changed the registry and thats it, I got my dialer back.
cheers
Burjis
sim code input
does this also work for the sim code input ?
daffy
patterns said:
i just did this and nohting changed? i have the same dialler that you get with the touch 2.1 wm6 mechle's rom?
Click to expand...
Click to collapse
change the setting. WAIT ABOUT 20-30 SECONDS and then soft reset.
The WAIT is hard to explain, but then you can be sure a registry setting keeps changed.
worked fine after the WAIT
daffymol said:
does this also work for the sim code input ?
daffy
Click to expand...
Click to collapse
To modify PIN pad you can remove this line:
[HKEY_LOCAL_MACHINE\security\ResOver\Bitmaps]
"BaseDll"="phcanOverbmp.dll"
cesconoa said:
To modify PIN pad you can remove this line:
[HKEY_LOCAL_MACHINE\security\ResOver\Bitmaps]
"BaseDll"="phcanOverbmp.dll"
Click to expand...
Click to collapse
thanx. it works
now only the comm mannager is green.
can i change that also ??
greets daffy
Hi all,
Have somebody a link where I can find skin for the small caller window ?
I mean the half-screen window which appear when we are called ?
I think remember that this window is skinned in the Diamond Rom WWE V1.0.
I don't know how this window it's call so i find nothing on google.
Thanks.
P.S : Is it possible to "cancel" this window because i'm using PointUI and it takes time to go back to HTC Home screen, then make appear the small caller...So is there other solution ?
Use Advanced Config tool
paul.crepin said:
Hi all,
Have somebody a link where I can find skin for the small caller window ?
I mean the half-screen window which appear when we are called ?
I think remember that this window is skinned in the Diamond Rom WWE V1.0.
I don't know how this window it's call so i find nothing on google.
Thanks.
P.S : Is it possible to "cancel" this window because i'm using PointUI and it takes time to go back to HTC Home screen, then make appear the small caller...So is there other solution ?
Click to expand...
Click to collapse
Hi,
The Advanced Configuration tool did it for me. Install, open prog, choose to disable Phone skin, soft reset, voila
(I use schaps_advancedconfig_v2020)
jcschrijver said:
Hi,
The Advanced Configuration tool did it for me. Install, open prog, choose to disable Phone skin, soft reset, voila
(I use schaps_advancedconfig_v2020)
Click to expand...
Click to collapse
GOOD JOB !!!!
thanks dude for sharing ...
If u use Advanced Configuration Tool to create custom accent, u may found that some text is missing in some application.
I found that advance config use old version(may be nodo) of "xxxx_ThemeResources.xaml" and "xxxx_System.Windows.xaml".
if who use custom accents and found that some text is missing do this"
That two file is the setting of ui found in /windows.
xxxx meaning.
xx xx
[theme][accent]
So dark & first accent is 0000 light & first accent 0100.(if u have more theme it will 03xx , 04xx, ......)
If u want to fix ur custom accent.
1.find accent number. Open registry editor go to HKLM/controlpanel/themes/accentdisplayname/ look to ur accent number and remember.
2.note ur number code "#????????".
3.find the way to copy xxxx_System.Windows.xaml & xxxx_ThemeResources.xaml from /windows to ur PC.( all xx[Some number that don't have bug]_?????????.xaml )
4.edit all ThemeResources.xaml. around line 115 will have name of color under that line will have color code replace with ur color code.
5.rename all with the right number of ur accent. xx[ur accent number]_?????????.xaml.
6.find way to copy all to /windows.
END
Ps. I use WPDM to copy file.
Missing text
From Whatsapp.
Translation!
Dont use Advanced Config because thare is a bug that when useing a custom accest color made buy Advanced config some text dosent show up in some applications!
however...
he says the bug is caused buy advanced config useing nodo theme's files
He has not stated what version he is useing!
Also this tutorial is to fix 1 bug with 1 accsent color made buy advanced config!
thare are 152 colors included in v1.5.0.0!
so I hope you have all year!
my sugjestion is if you are experianceing this bug where some txt is not showing in some application just use a default color!
My english is very bad sorry.