Develop Bugs

Please , how can switch between two language (shift+sym)

Please , how can switch between two language (shift+sym), im using rom 3.2 ivan and I install arabic, but now way to change hard keyboard , pleasse help me.

You have to press SHIFT +SYM for 1-2 sec. And then the ahrd Keyboard will change to arabic
Else you can use keypad on screen by pressing (LOAH AL MAFATEAH) written in ARABIC. when you will clikc on keppad you will c several option e.g. Keypad, letter recognizer, Block recognizer,..... it is written ther.
By the way are u able to receive message in ARABIC language and are the readable. cause i can only send Messages in ARABIC but cannot read. Message always received are coming as ???????????????????????????????

Remapping Keys on the Excalibur

Has anyone see anything on how to remap keys on the Excalibur (assuming it can be done) similar to the relatively easy remaps that could be done on the SP5M and the 8500/smartflip/3125? I looked thru the windows directory and could not see anything to modify that might relate to remapping the explorer key and/or the email key. I would like to remap one of them to the internal voice dialer. I have it set to #9 as a speed dial but would like to remap if possible.

probable solution, to be confirmed
I've found this: (sorry, I have to repeat this sequence)
"Your device Locale - how to change the letters entered when pressing keys on the hardware keyboard.
Change slide-out keyboard layout
If you have a Device from one country, but would like to use the keyboard layout of another, you can change the keyboard's language setting to do so...
For US layout (QWERTY):
HKCU\ControlPanel\Keybd\Locale = 0409 (REG_SZ string)
For German layout (QWERTZ):
HKCU\ControlPanel\Keybd\Locale = 0407 (REG_SZ string)
For French layout (AZERTY):
HKCU\ControlPanel\Keybd\Locale = 040C (REG_SZ string)
For Spanish layout (AZERTY):
HKCU\ControlPanel\Keybd\Locale = 0C0A (REG_SZ string)
For other codes, see: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
Note that the values are STRING values, not DWORDs!
"
Alas, it seems to me somewhat doubtable that it be in the HKCU section, having assumed it to be a machine-wide setting. It does not work in either place. Can anybody confirm or correct this setting for smartphones?
Thanks Michael

http://www.howardforums.com/showthread.php?t=1029394

HKLM\HARDWARE\DEVICEMAP\KEYBD\CURLANG = 1033 for US keyboard.
make sure to reboot afterwards for the change to take effect.
peace
D

HKLM\HARDWARE\DEVICEMAP\KEYBD\CURLANG = 1031 for German QWERTZ keyboard

Great Help
drunknmunkie said:
HKLM\HARDWARE\DEVICEMAP\KEYBD\CURLANG = 1033 for US keyboard.
make sure to reboot afterwards for the change to take effect.
That's what I needed, thank you, drunkmunk!!
miguel
Click to expand...
Click to collapse

mschweiz said:
drunknmunkie said:
HKLM\HARDWARE\DEVICEMAP\KEYBD\CURLANG = 1033 for US keyboard.
make sure to reboot afterwards for the change to take effect.
That's what I needed, thank you, drunkmunk!!
miguel
Click to expand...
Click to collapse
I thought you wanted to just remap the mail and web keys? The link I posted above explains how to easily accomplish that.
Click to expand...
Click to collapse

Does anyone know which shortcut file controls the lower right hand mail key on the dash?
Thanks

swivel said:
http://www.howardforums.com/showthread.php?t=1029394
Click to expand...
Click to collapse
i don't get this tutorial. and i also don't have the lnk files. How to remap on the htc s620 and not on the dash?

I agree. I have a S620 and I don't have the link files either. Can someone please help?

You absolutely have .lnk files on your phone. You just must not be able to see their extensions. It's quite simple. Find the .lnk file that corresponds to the button on the phone you wish to remap. Then drag and drop that .lnk file onto your desktop computer. Now open it with NotePad or a similar text editor. Then change the path to the desired application. Save it, and then drag it back to your device, copying over the previous .lnk shortcut.

I only have the Camera.lnk shortcut. I see the extensions. There is no lnk file for the mail and the internet explorer key.
But maybe if we create them manually? Does anyone with a htc s620 got that working? i am not talking about the t-mobile version.

I tried. It did not seem to worl on my S620.

link down
The tutorial referred above seems to be unaccessible. Could someone copy-paste it here?
ubigene

snudel said:
I only have the Camera.lnk shortcut. I see the extensions. There is no lnk file for the mail and the internet explorer key.
But maybe if we create them manually? Does anyone with a htc s620 got that working? i am not talking about the t-mobile version.
Click to expand...
Click to collapse
You don't have a \Windows\Short_IE.lnk file?

When you change your locale, is it still possible to switch between languages? I.e. have both English and, say, Russian at the same time?

Want to remapping Swedish letters, å, ä, ö in my Samsung i600
Hi
I'm new at this forum and have first question I hope I get help with.
I have just flashed my Samsung i600 and like now to remapp the Swedish letters, å, ä, ö, to some keys. at the keyboard. I have Swedish as my system
language
Anyone know how I have to do?
Thanks
Lasse T

mschweiz said:
I've found this: (sorry, I have to repeat this sequence)
"Your device Locale - how to change the letters entered when pressing keys on the hardware keyboard.
Change slide-out keyboard layout
If you have a Device from one country, but would like to use the keyboard layout of another, you can change the keyboard's language setting to do so...
For US layout (QWERTY):
HKCU\ControlPanel\Keybd\Locale = 0409 (REG_SZ string)
For German layout (QWERTZ):
HKCU\ControlPanel\Keybd\Locale = 0407 (REG_SZ string)
For French layout (AZERTY):
HKCU\ControlPanel\Keybd\Locale = 040C (REG_SZ string)
For Spanish layout (AZERTY):
HKCU\ControlPanel\Keybd\Locale = 0C0A (REG_SZ string)
For other codes, see: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
Note that the values are STRING values, not DWORDs!
"
Alas, it seems to me somewhat doubtable that it be in the HKCU section, having assumed it to be a machine-wide setting. It does not work in either place. Can anybody confirm or correct this setting for smartphones?
Thanks Michael
Click to expand...
Click to collapse
can anyone explain me how to do this?
thanks

okaj, i found i needed Total commander for it,
but still, i changed the layout but it didnot work,
the letter Q + FN should give me ! but gives me : %
so it its a qwerty layout, but not the US or UK layout, anyone an idea? thanks!

evow said:
okaj, i found i needed Total commander for it,
but still, i changed the layout but it didnot work,
the letter Q + FN should give me ! but gives me : %
so it its a qwerty layout, but not the US or UK layout, anyone an idea? thanks!
Click to expand...
Click to collapse
Seems to be that my device is set in USA language, but my hardware layout is UK,
iff i adapt it (0409) to 0809
i use the phone for a while before reboot it doesnt change..
iff i adapt the other reg keys, i´m only able to type numbers and no letters any more...
any help would be nice

Asus p525: anybody knows how to add a T9 Language?

Looking how to add a T9 Language to a p525 (limited to english and french on my version).
I've got the dlls, and I followed the instruction of this page: http://www.user.cityline.ru/~ronswens/Tips.htm
but apparently this is not enough for the asus p525
can anybody helps?
Srj

Hello all.
Could someone help me on this?
I plan to buy a P525 but it's gonna be an English or a German version.
This means that the alphanumeric phone keypad of the Device will not support the Greek language (I'm Greek), so I won't be able to use it for writing in Greek.
Is there any way (any program I can find / buy) that will allow me to map the alphanumeric buttons to a sequence of my desired letters?
For example when I press "2", it could show the following letters - (depending on how many times I will press it):
a b c 2 α β γ .... etc
Now can that be done?
I know it can be done with a qwerty hardware keyboard like those of the Ipaqs 69xx - with a program called Sunnysoft Interwriter - but I don't know if it can also be done with an alphanumeric phone keypad like the P525's one
thanx in advance

srj said:
Looking how to add a T9 Language to a p525 (limited to english and french on my version).
I've got the dlls, and I followed the instruction of this page: http://www.user.cityline.ru/~ronswens/Tips.htm
but apparently this is not enough for the asus p525
can anybody helps?
Srj
Click to expand...
Click to collapse
These dlls exist in different versions, and you will have to find the version that will work on P525, for example by trying different smartphone models as source.
Also dictionary dlls are not enough, you will also need to replace T9AWEngine.dll

Swedes key layout on Windows Mobile "XDA Live" 0.10?

hello, can eney body pleas explain to my how i setup so i get Swedes key layout on my t-Bord agen? eney reg key i need to Chang?.
i haw tested
Go to hklm/software/oem/qwerty/layout/
make sure the hex value is 20409, you probably have 40409.
recommended of crosswind
but it don't help when I'm trying to get Å i get noting, when i try Ö i get arrow down and when i try Ä i get =
im using Windows Mobile "XDA Live" 0.10

@Kinky:
20409 gives you the default US layout. If you want Swedish layout you have to set the value 20414 (hex) for this parameter. This is effective at startup so a soft or Russian reset is required. Russian reset is better as it guarantees that the registry changes have been saved to Flash disk.

Hello. Is this trick for software keyboard or hardware keyboard? I would like to get the norwegian keyboard, but no luck so far.

@BrumBrum74:
20414 is a Nordic QWERTY layout, i.e. the hardware keyboard layout for Finnish, Swedish, Norwegian and Danish. It contains the characters 'å', 'ä', 'æ', 'ø' and 'ö'.

isnt there a file called P_Nordic_keyboard in extended rom for that? and to use swedish in software keyboard you use skandinavisktastatur5.cab. You can DL here http://forum.xda-developers.com/showpost.php?p=1150091&postcount=97
There is norwegian softkeyboard in skandinavisktastatur5.cab to.

I have installed the cab file on my norweigian Tytn, and it works perfectly with Windows Mobile "XDA Live" 0.10.

shark1 : what about hardware keyboard?
The software keyboard works fine.

Tanks now i can us åäö agen now dount ned to us a insted fore åä and o insted fore ö., on keybord
abubasim said:
@Kinky:
20409 gives you the default US layout. If you want Swedish layout you have to set the value 20414 (hex) for this parameter. This is effective at startup so a soft or Russian reset is required. Russian reset is better as it guarantees that the registry changes have been saved to Flash disk.
Click to expand...
Click to collapse

What program do you use to change the values?

German keyboard file for wm6.1 ENG?

Hello,
i install the shadow 2.1 CE Clean version ENG but everything works fine
but the problem is i can`t writing in my qwertz keyboard german
Have you people a idea how can write in german
it is possible to add german keyboard files in wm6.1 ?
Whats folder and File Please help me?
Thanks
Peace to the people
i have a mda vario 2

If you're talking about hardware keyboard, look at the Hermes Wiki or install Advanced Configuration Tool by Schaps.

Is this corectly i must only change the registry to use German Hardware Keyboard nomore files needed
Great Thanks
Restore local language support for sliding keyboard after upgrade to a different language ROM
This has been reported not to work, see below for another hack
You need to create Registry value of name "Locale" and type of "String" and data of "Localization ID" within
[HKEY_CURRENT_USER\ControlPanel\Keybd]
Localization IDs:
German = 0407

superman13 said:
Is this corectly i must only change the registry to use German Hardware Keyboard nomore files needed
Great Thanks
Restore local language support for sliding keyboard after upgrade to a different language ROM
This has been reported not to work, see below for another hack
You need to create Registry value of name "Locale" and type of "String" and data of "Localization ID" within
[HKEY_CURRENT_USER\ControlPanel\Keybd]
Localization IDs:
German = 0407
Click to expand...
Click to collapse
no. you have to read carefully the wiki. you will see there that you have to create it in
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
the name of the key is Layout
the value (hex) of the key is 20407
do a soft reset via switching the device off (long button press of the on/off button) as it keeps your changes. otherwise you will loose your changes.

Thanks that works fine

this CAB does the registry entry for a german keyboard and installs the file (\windows\sym.0409.txt) for the german umlauts (that you get ä first and not á when you switch via dot + space)

Vielen Dank

Hello,
i've installed the rom HTC HERMES_CE OS 5.2.19949 Build 19949.1.2.0. and your tool doesn't work with this rom. Do you know what I can do to have the german Umlaute (äöü)?
Thanks a lot.
Greetz.

edit the file \windows\sym.0409.txt yourself. it is very easy.
have a look into it and you will see what i mean.
colt-ca0 said:
Hello,
i've installed the rom HTC HERMES_CE OS 5.2.19949 Build 19949.1.2.0. and your tool doesn't work with this rom. Do you know what I can do to have the german Umlaute (äöü)?
Thanks a lot.
Greetz.
Click to expand...
Click to collapse

Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]There is a key called 'Layout' and it is in Decimal.
The suitable value for German Hermes keyboard is 20407 (132103 in decimal). =qwertz

Thanks for the posts. I installed the rom, then I installed the tool of stan23. I looked into the registry and the value is 20407. When I want to use the hardware keyboard I can't write a "ä, ö, ü" not even an "á". I can't understand it.

check the following:
- is the file sym.0409.txt still there (maybe you have deleted it?) and have a look into it.
- is the value of the reg.key 20407 HEX
- when typing: make sure you press "a" then "dot-key" then "space-bar".
if this does not work, hard-reset.
if this does not work, try a different rom