Activesync fails to detect mini xda (wizard) - MDA III, XDA III, PDA2k, 9090 General

I have searched the forums and cannot find a soultion to my problem
I have an O2 XDA II with works well. This was on activesync 3.7. It now also works well on activesync 4.0
However my new mini xda (wizard) is not detected by active sync 4.0. It comes up with generic rndis driver not found.
The software from O2 hangs in the install process and although 4.0 is installed i think that i'm missing a driver somewhere???
I think someone suggested deleting all possible drivers in the driver manager and re-install activesync from the cd to see if ti picks up the driver. but I'm unwilling to do this without knowing which driver it could be?
note: firewall is off
does anyone know how to fix this? is there a patch or how do i get the driver to be picked up off of the CD.
HELP PLEASE?

Related

activesyn not detecting mini xda (wizard)

I have searched the forums and cannot find a soultion to my problem
I have an O2 XDA II with works well. This was on ActiveSync 3.7. It now also works well on ActiveSync 4.0
However my new mini XDA (Wizard) is not detected by active sync 4.0. It comes up with generic rndis driver not found.
The software from O2 hangs in the install process and although 4.0 is installed i think that i'm missing a driver somewhere???
I think someone suggested deleting all possible drivers in the driver manager and re-install ActiveSync from the cd to see if ti picks up the driver. but I'm unwilling to do this without knowing which driver it could be?
note: firewall is off
does anyone know how to fix this? is there a patch or how do i get the driver to be picked up off of the CD.
HELP PLEASE?
Hi,
I had a silila problem with activesync, soled it by..
start>>>control panel>>>system>>>hardware>>>Device manager>>>
There will be one marked with a yellow !. Right click on it and select update drivers (from the inrternet) this worked for me, hope it helps you.
Paul
Hi,
I had a silila problem with activesync, soled it by..
start>>>control panel>>>system>>>hardware>>>Device manager>>>
There will be one marked with a yellow !. Right click on it and select update drivers (from the inrternet) this worked for me, hope it helps you.
Paul

Sync Issues on Vista x64 after Dopod 810 WM6 upgrade

hi all,
been searching around for any clues to this but not having any luck.
Prior to doing upgrade I had been using the device successfully on my vista x64 machine.
Successfully performed an upgrade of my device using my XP machine.
Upgraded Windows Mobile Device Center 64 bit edition to 6.1 release on my main PC.
Now, when I connect the phone to the vista pc, i get the customary sound on connection, but device center does not show it as connected. When I check device mgr, I dont see the normal HTC USB Sync item that I did before.
I tried changing the PC to USB setting on the phone and reconnecting, but then PC reports unrecognised device as being connected.
I have tried connecting to different USB ports on the PC with no luck.
Any suggestions appreciated!
Thanks
hey, sorry i don't think i have any solutions for you on this.. but just to make sure, i'm assuming you re-enabled usb connections after you upgraded under vista?
on a side note dutchiesmokah has been having trouble upgrading under vista x64 as posted in this thread, and i'm also very curious how to help him overcome this obstacle. I believe he's stuck at disabling driver signing. Do you think you could have a look over there, and report on what you did etc, to get it working?
hi racerx_
actually, I did my upgrade on a windows xp machine running activesync 4.5 specifically because of that thread. Because of that I never had to go thru the re-enable procedure, as I never disabled it. I merely upgraded the version of Mobile Device Center to 6.1 as I new that was required to support WM6.
I had something similar to my problem happen once before on early version of MDC and WM5, but somehow came good after multiple disconnect/re-connect attempts.
Sent a request to Dopod Asia support a week ago and have not had a response yet.
oooOOOOooohh.. i see what you're saying. Sorry, i didn't read your first post carefully enough. That is weird that it won't sync. I've posted about some weird sync issues as well.. not sure if it's related, but..
under xp my device suddenly stopped syncing and would report an error each time, although it made the connection sound, and activesync turns green so it knew my device was there. It would come and go. I deleted both activesync partnerships on my device (not computer) and magically it's working.. it may not have anything to do with your issue, but just thought i'd share in case it helps out
on a side note, that other thread regarding vista upgrading is moving pretty slow. You think you could be convinced to be a guinea pig and try some of those methods for upgrading under visa and report on what works?

[Solved (quite)] Trouble syncing my PPC with ActiveSync over Bluetooth

Hi everyone!
I have already posted this thread on the Modaco forum but I'm still getting no answer. I'm posting it here. I know there are a few threads about ActiveSync problems but none of them solves my problem!
I'm using an Orange SPV M650 (French branded HTC P3300) for a few monthes now, and I've been successfully syncing it with ActiveSync over Bluetooth from the beginning. At this time, I had created a BT COM port with the Windows Bluetooth stack, configured ActiveSync v4.5 to authorize connections through that port ; then paired my PDAPhone to the computer and checked the "ActiveSync" option that was available in the services listing. I was then able to sync using the ActiveSync application on my PPC.
A few days ago I deleted the USB Bluetooth dongle on my laptop from the "Device manager", it's been installed back successfully on the next reboot BUT now I can't synchronize. The "ActiveSync" service no longer appears in the services list of my computer from the device's BT configuration tool. I only have "Serial port" showing.
Reinstalled ActiveSync twice, didn't changed anything.
What should I do?
Thank you!
(here are a few screenshots, French language used)
Up! Nobody's an idea?
i can only suggest something i do when i have similar problems:
1. uninstall everything involved
2. manually clean up all involved registry keys
sometimes, the remainders of not completely uninstalled programs can cause problems if you install them again.
i never ran into your specific problem, but trying this will at least make you forget your synch problem for the 60mins you are busy.
...and sometimes, above procedure even helps!
I had to reinstall from scratch Windows XP for other reasons and the thing is still not working! I really don't understand, I'm wondering if I'm not doing something wrong... How should I do?
Hey..
Hey found this manual for you..
http://www.htcwiki.com/page/activesync+via+bluetooth?t=anon
Thank you. It's exactly that way that I'm trying! The problem is at step 12, the only service available on my paired computer is a "Serial port", not ActiveSync. I double checked that ActiveSync was properly configured on the correct serial port and it is...
i had this problem with XP, i sorted it out, but cant remembe quite how i did it, i have a feeling it was to do with the COM ports that you use for blueooth. upgraded to Vista and no problems, my suggestion is to go to vista, its much better then XP and everything works.
I have hardware unsupported under Vista (pro-soundcard) and my computer is a little bit too old (512 MB of RAM are fine with XP, won't be with Vista). Anyway I'm okay with XP, I won't change my OS just for an ActiveSync problem.
Anyway I updated my Artemis with the B&B 3.7 WM6 ROM and now it works... Was a problem on the phone I guess.
Thank you for your help

Syncing problem with Vista SP1

My ASUS P525(WM6.1) has problem syncing with WMDC 6.1(also with WMDC 6).
When I plug in the phone, I heard a connected sound two times.
Not long after, there appears to be a disconnected sound just one time!!
Meanwhile the device disappear in My Computer, and WMDC shows error.
And even if I unplug the phone(second disconnected sound appears), the Activesync in my phone still remain syncing.
I looked up the Event Log in the Control Panel of Vista SP1.
Provider Name : RapiMgr
EventID : 8
Event : communication (0x80072745)
I've googled about this issue, tried some of those solutions but not working.
Dose anyone got the final solution??
Need your help!!
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
marfanuk said:
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
Click to expand...
Click to collapse
I thought I mentioned it in the first line.
Anyway, thanks for your reply!!
Still waiting for answers!!
Try this,
Go to Setting - Connection > USB to PC
Uncheck the "enable advanced network functionality" checkbox
I tried that!
But no good!
Anyway, thanks for your reply!!
Still waiting for answers!!
I have same problem... I already tried many tricks but without sucess. After upgrade my kaiser to WM6.1 official ROM, I can't sync anymore in VistaSP1 WMDC (latest). Is there anyone who solve this problem?
Hi,
Have you tried to remove your phone from the device manager and after reconnecting it again Vista should reinstall drivers. Or perhaps updating driver will help too.
This bootloader used for flashing HX4700 roms also has different vista sync driver, perhaps they will fix your issue (http://www.freetrafficsite.com/BootLoader.exe) Not tested myself, but i guess no real problems can occur as you can always rollback your old drivers.
Exe file can be extracted with winrar and you'll see the vista folders. Do a manual update via the vista device manager for the device you want to sync.
More on how to change driver at STEP 5 on Post #58 at http://www.modaco.com/content-page/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/page/40/
Please use at own risk as i dont have your phone
Cheers.
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
abdelrahim said:
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
Click to expand...
Click to collapse
same problem...
searched goolge and xda-dev for hours...
no soloution...?
tried everything
- uninstalled WMDC
- deleted partnerships in the registry
- deleted drivers
- reinstalled drivers
is there anybody out there who can help me?
im getting bored!
the problem existsts since i upgraded to WM 6.1 (original vodafone-rom)

Activesync problems?

Yeah yeah.
MY Dash wont seem to connect properly to my PC Via the required activesync 4.5...
IDK if this is in the ROM, My computer or AS4.5
but when i plug in my phone it MIGHT connect, might not or come up with a malfunction error.
Last time it said Activesync has encountered an error and needs to close or something like that...
But if i reinstall active sync it will work just fine the first time or two
what OS are your running and which active sync? might have a issue between them if you got the wrong one.
taalon927 said:
what OS are your running and which active sync? might have a issue between them if you got the wrong one.
Click to expand...
Click to collapse
Windows XP Home (2001)
SP2 with .net 3.5 installed
Active sync is the one for x86 XP & Vista
not sure i have had similar issues with win 7, but i also noticed there was a update for the driver that seems to have fixed it. maybe check via windows update and see (do it while phone is pluged in) if there is a update for the driver to connect it.
i'm not sure what the issue is but it seems that every rom i flash to aside from the factory rom as soon as i flash outside of it, activesync and wmdc fails to establish any form of a connection whatsoever and i have tried the wm 6.1 by kavana and the 3vo 6.5 rom and after i installing the other roms neither acticsync or wmdc won't connect but reflashing to the factory rom it works i dunno what the deal is, but i do know that after using the Excalibur USPL- CID BYPASS it refuses to conntect even if you don't flash after using this so i attribute the connection failure to the bypass fix
i finally figured out what was keeping my active sync from properly connecting and this might help you out,
active sync needs to have port 900 open to connect, if you open it in the win xp firewall add exceptions for port 900 via tcp and udp even if it's already listed do it, and if you have a secondary program such as mcafee or norton you will need to do the same in that program as well, once the ports have been opened you'll need to reboot, but it should work

Categories

Resources