Hi there,
I have searched the forums on how to do this already with no real success.
I have installed the extracted BB Connect software for T-Mobile onto my PDA2K, running ROM 1.40, and I am on the Canadian Rogers network.
The cab was named:
htc_pocketpc_tmo_england_2.0.0.25-18.cab
The installation runs fine and the PIN is generated correctly, however the APN settings are hardcoded to blackberry.net
I need to change this to internet.com and set a username and password of:
username: wapuser1
password: wap
Has someone been able to create an install that allows you to change this in the GUI?
Or, does someone know which DLL file this is set in so I can modify it in C++ or another DLL editor?
Or, can someone out there that knows how to do this modify the cab for me with those settings?
Cheers
Aaron
Actually, my mistake... I need to have these settings:
Rogers AT&T (Canada)
GPRS APN : blackberry.net
WAP gateway IP: 208.200.67.150
WAP gateway port: 9201
Cheers
Aaron
I've been able to modify the IP with a HEX editor and it connects and gets an IP.
However, it still doesn't sync. I wonder if the ports are incorect. It says:
Remote Port: 19781
Local Port: 19780
Not sure if this needs to be changed....
A
Does anyone have a CAB file to install the MMS Settings for the T-Mobile Web'n'Walk contract tariff for the Artemis?
I have set up GPRS and internet access already, but cant seem to get MMS set up properly.
Can someone provide either step-by-step instructions or ideally a CAB file (for when the next B&B ROM comes out!)
Hi guys
I'm looking at a way to creating a custom operator connections cab (for MMS, GPRS/3G and custom work proxy settings).
So far I've managed to find the TmobileUK.xml operator settings and the cabwiz tools, so it will make the xml file into an easy to install cab file.
My question is what do I need to edit in the XML file to create a "My work network" connection that has a custom proxy in it? At the moment it creates an "Internet" connection only.
Thanks!
hi folks, as some of you may have know that connectionsetup doesnt have Canada listed as the country. I'd like to add the settings into the provisions.zip but I can't figure out the password for the zip. There was an older archive that uses a password of 1234 but I don't really want to have the latest setting list. I was wonder if anybody could figure out what's the password for the attached file. I've tried bruteforce password recovery for all printable letters up to 5 char but still no success.
kin0kin said:
hi folks, as some of you may have know that connectionsetup doesnt have Canada listed as the country. I'd like to add the settings into the provisions.zip but I can't figure out the password for the zip. There was an older archive that uses a password of 1234 but I don't really want to have the latest setting list. I was wonder if anybody could figure out what's the password for the attached file. I've tried bruteforce password recovery for all printable letters up to 5 char but still no success.
Click to expand...
Click to collapse
Try this one, you may have to enter the wapuser1:wap username and password
Password for newer provision.zip is:
030D681B-1DFC-4bd0-A72A-A9B3CCCDA653
Newer provision.zip from HTC ConnectionSetup 1.0.31247
030D681B-1DFC-4bd0-A72A-A9B3CCCDA653
this pass unpacked not all files
Need help again
post the cab file for this version connection setup.
hi guys - Does anyone have the latest provision.zip file? I'am looking for Canada for both Rogers and Fido connection settings. Thanks
ConnectionSetup v1.5.37142.1 & Provision.zip Password
The following file "HTC_Connection_Setup_v1.5.37142.1.cab" was exctracted and building from last official HTC Touch Diamond ROM.
Very very updated database (Provision.zip <=> PROVIS~1.005)
I think it's OK for all Windows Mobile Devices, please test and report unexpected error.
ALL ZIP DATABASE PASSWORD IS: "030D681B-1DFC-4bd0-A72A-A9B3CCCDA653"
--------------------------------------------------------
ENJOY IT
marromarco said:
The following file "HTC_Connection_Setup_v1.5.37142.1.cab" was exctracted and building from last official HTC Touch Diamond ROM.
Very very updated database (Provision.zip <=> PROVIS~1.005)
I think it's OK for all Windows Mobile Devices, please test and report unexpected error.
ALL ZIP DATABASE PASSWORD IS: "030D681B-1DFC-4bd0-A72A-A9B3CCCDA653"
--------------------------------------------------------
ENJOY IT
Click to expand...
Click to collapse
Many thanks, it work perfectly with my Touch HD under Pyrana ROM v.12B. It resolve many problems (MMS...)
aw, simyo spain still not included on the database
LinXP said:
Newer provision.zip from HTC ConnectionSetup 1.0.31247
030D681B-1DFC-4bd0-A72A-A9B3CCCDA653
this pass unpacked not all files
Need help again
Click to expand...
Click to collapse
How do I use that zip file? How is it intalled into my Hermes?
Alex1306 said:
How do I use that zip file? How is it intalled into my Hermes?
Click to expand...
Click to collapse
Well. Download "htc_connection_setup_1_5_37142_1.cab" and simply copy to your SD card or phone memory.
Execute and install it directly from your phone!!!
If you want, rename it before copy to your phone, so you'll have a shorter name, something like "Connection Setup.cab"
Bye
flx_ said:
aw, simyo spain still not included on the database
Click to expand...
Click to collapse
Wiki says:
symio is a mobile virtual network operator (MVNO) since 29 January 2008 through the Orange network.
I'm italian guy and I don't know about this operator. I hope works with Orange settings but I'm not sure. Try and post your experience!
When I'll found a new database, even based on HTC HD or Diamond2, I'll post Connection Setup with new database.
Not sure if this has been posted here. If it was I apologize.
I installed the WSPHeader.cab only. I did not install anything else. I wrote down all my settings just in case it didn't work. Well it working so far. My incoming pictures are full size. I'm running NRGZ28's 'Rose' ROM Ver 1.3
I copied this from the Wizard forum
think I've got it figured out for T-MobileUSA on WM6..disregard my previous post.
First download Lurches CAB file for your plan ($5.99, $29.99, or $39.95) here:
http://forum.xda-developers.com/show...ighlight=lurch
install Lurches Cab then soft reset
Install "MMS auto config t-mobile.cab" then soft reset
Install "T-Mobile UStPPC.CAB" then soft reset
Set MMS picture size to Original
In 'servers' 'T-Mobile MMSC' 'Connect Via' field select 'T-mobile MMS'
good to go.
Let us know if this works
Update:
I've messed with this all day and this is what i've come up with:
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"Accept-Charset"="us-ascii;utf-8;iso-10646-ucs-2;ISO-8859-1"
"Accept"="application/vnd.wap.mms-message;*/*;"
"User-Agent"="prodigy/arcsoft-mmsua-ppc-3.0.0.xx"
"Profile"="http://www.htcmms.com.tw/gen/wizard-2.0.xml"
"Accept-Language"="ge"
This is all I've needed (it might be just one or the other etc...), Instead of installing a bunch of cabs that are doing who knows what.
Try it and let us know...
So now I'm getting full sized pics!...I've NEVER got full sized pics, I've always though that it was just the cheesy way the networks worked...Until I encountered this thread.
I'm not sure, but these MAY NOT be carrier specific. they might work on all services because these reg keys are included with arcsoftmms rgu files in cook packages, but the values are different.
I'm using arcsoftmms 3.0.7.19
I've made a cab file if anyone's interested..WSPHeader.cab. Just use this ONE cab if your settings are aready the way you want them and your only issue is picture size
Attached Files
File Type: cab MMS auto config t-mobile.cab (1.3 KB, 182 views)
File Type: cab T-MobileUStPPC.CAB (107.2 KB, 147 views)
File Type: cab WSPHeader.cab (394 Bytes, 248 views)
Click to expand...
Click to collapse
Here is a link to the thread
http://forum.xda-developers.com/showthread.php?t=297538&page=6