With the simmanager, I can copy the phonebook on my sim to contacts.
But is there a way to reverse it too? I mean copy some contacts to my sim?
Thanks in advance
Hi
this is a very interesting question, I would need the same and was wandering about how to do it ...
anyone any idea ???
ciaoo
Isidar :shock:
In Contacts, if you tap and hold on one or more selected contacts it allows you to save to SIM.
Thnx DCS!!
You're the master :lol:
only one word:
GREAT - you are great
tanks
can you please explain how to do it step-by-step as my screen has broken :S or how to back up to a computer..?
Thanks heaps
the normal way to back up contacts or pim data to the pc would be: sync it!, put it in the cradle, set up a partnership, then all your pim data (except sms) will end up in your outlook and can be synced with any other device (replacement i guess). another way would be pim backup. but exactly how broken is your display, because your suggestion to back up on the device itself would require, that you at least see something!?
to get to the step by step part (in case your display shows information, but is maybe without touch function):
1. go to this site and download mymobiler (to control your device from your pc): http://www.mymobiler.com/
2. install it to the pc, it will install on the ppc automatically, once connected to the pc
3. if that worked, you should be able to see the device's screen on the pc and control the device with mouse and keyboard, so avoiding your screen problem
4. to the actual backup: go to http://www.dotfred.net/ and download pim backup 2.8 for your os, either the wm2003 or the "wm5 and up" version
5. unzip the package
6. copy the exe to your device
7. start it using mymobiler
8. choose data to back up, in your case the contacts (and maybe a little more)
9. pick the location, where to put the backup file
10. start the backup.
11. once it's done access that location and copy the backup file to your pc
12. through your broken device out of the window
13. take a new device, connect that to the pc, copy the pimbackup exe and the backup file onto it
14. start pim backup, pick restore, pick your backup file and hit start
15. as soon as it's done, your contacts, mail, calendar, whatever you picked to back up in the first place is restored to another device and possibly another os
if you don't have a new device yet, maybe you should think about just syncing the device with outlook, because your pim backup file will not import into other devices (non-windows mobile devices) or outlook or anywhere, you can only use it on winmo devices, while outlook pim data can be synced with nearly every brand of mobile phone, in case you pick another kind of phone as a replacement for your device.
in case you also want to know how to repair your device or where to get spare parts and so on, please re-post. for your one line i already sat here for 20 minutes writing a novel of things you maybe don't even wanna know
have fun, good luck, re-post
Chef_Tony
Hi everybody,
I'm stuck trying to upgrade my TyTn to WWE WM6 (HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe).
After following all the steps of the upgrade wizard, the screen of the Tytn goes black and subsequently the ActiveSync connection is lost. After a while i then get the dreaded "ERROR [260]: CONNECTION".
I am running the original ROM (ROM 1.18.255.3) , and active sync 4.5 on Windows XP SP2. I downloaded the WM6 upgrade directly from HTC website after properly registering my device.
I even tried upgrading to SPL version is 2.10.olipro, but i still get the same behaviour.
[EDIT] Another thing i noticed is that when launching the upgrade executable, when it "veryfies informationj on my computer", if the TyTn is already connection via ActiveSync, it automatically resets into bootloader (4 colors window) and i am forced to perform a soft reset before re-trying the upgrade.
Could anybody help me out here?
Thx!
few people have seen this - no solution as yet.
Best workaround is to use the SD Card update method. No USB connection required.
todd_jg, could you please point me out to a procedure for upgrading to WM6 via SD card?
Thank you in advance.
dondobert
There is a description in the WIKI, just go HERE for instructions on how to flash from SD card.
Best wishes
I'm having the same exact problem....
I'll try the SD card method I guess. I'm suspecting it has something to do with how activesync recognizes my phone, because when I just sync normally it doesn't do it as well as previous phones, for example when I plug in the phone it wont auto recognize, I hafta manually start active sync on my computer before it starts.
this is because the usb port in the device is crap...it gets worn and then the cable gets lose....im having the same problem ,it is a nitemare...new usb cable sometime fixes the problem.i have tried 7 new cables the same happens. it gets so bad tha you will be unabled to charge the device,im afraid we got to send the device to htc for repair.
Still nothing...
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
@dondobert -
i assumed, you have already tried to uninstall and re-install ActiveSych 4.5 and recreate the synch profile.
OR
try this -
#1. on your phone device goto start-settings-connections-USB to PC
and set the tick mark to Enable advanced network.
#2. synch your device via ActiveSync
#3. do your upgrade OS or Radio
#4. once you are completed the install, undo #1.
Note 1: only do the above steps if you are having continously encountered the lost connectivity to ActiveSynch during the OS or Radio upgrade.
Note 2: your device must has either HardSPL Olipro method or SuperCID
The best way I have found to work around error 260 is
First disable Antivirus software
Next Go into Windows Firewall then exception tab, and search for "Windows Mobile-based Device Connectivity". Check it as an exception.
For the people who use Microsoft Live OneCare,
Go to "Change OneCare Settings" then go to the "Firewall" tab then click the "Firewall Connection Tool" . Make sure the Active Sync/Windows Mobile Device Center is checked on
Good luck
Let me know if this works
dondobert said:
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
Click to expand...
Click to collapse
I had this problem, and managed to upgrade with my SD card just fine. In fact, my upgrade died and the device was stuck on bootloader mode.
The SD upgrade method is so reliable I may just do it now for every upgrade.
@dondobert -
on your reply post #8, you have mispelled on the HERMING.nbh file name. it should be HERMIMG.nbh
please verify the file name on your SD card, and rerun the SD procedure.
I had the same 260-error. Fixed:
- Did a "Clear Storage" (factory settings)
- Did all the "settings up your new device"-stuff.
- Did new active sync to computer (vista)
- Flashed just fine from original exe. (And i do have olipro SPL)
I have problem and resolved
Hi I have a same problem but, i just try to upgrade with mobile in boot mode and appears the error, but when connect normally mobile to pc and start upgrade error dissapear, and upgrade full, schap's spanish and radio 1.50 try this method cheers
Had the same problem and got it working
You need to set you TyTn in bootloader (4 color screen) mode and then connect it to the computer. then start loading the WM6 and you should be fine. I had done it using Schaps wm6 and it worked fine...
good luck.
Hi there ...
I had the same Prob with error 260 ...
- After i disabled the "USB-TO-PC" extendet function
- Reboot the PC
- Soft Reset my Vario II
ist works, but i don't know why
I hope it will work on yout decive to ... CU No.Trace !!!
Successful!!!
Thank you all for the great support!
For all of those out there still struggling with the problem, for me it finally worked following hellomotto's suggestion.
Regarding otoro_315 remark: yes, my mispelling int he post, file name on SD card was indeed HERMIMG.nbh.
Thank you all again!
Cheers
Had exactly the same problem. Resorted to SD upgrade - went very smoothly (Official Cingular WM6). However, will keep these suggestions in mind for the future.
I think the SD upgrade probably also eliminates some possible points of failure. According to wiki instructions, SD must be erased except for the img file - takes a bit to transfer 2G to/from SD. Don't know if this is a must - but didn't want to take a chance. Might just buy a cheapie SD just for upgrades.
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
You mean the SD card was not erased and there were other files on it? (You don't say that explicitly).
I too was amazed at the speed - the wiki said it takes about 30 minutes - when it indicated complete in less than 10 min, I let it alone for about 15 min. because I thought it was going to do something else!
consul said:
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
Click to expand...
Click to collapse
Hi all,
I've been trying to find a working solution which will allow me to use my D810 in Mass Storage mode.
I've tried both Card Export and WM5Storage but while they both appear promising I end up having to Soft Reset my phone whenever I attempt to use the device in Mass Storage mode.
I've tried various 'tricks' (like installing Card Export after/over WM5Storage) but nothing seems to work.
Does anyone know of any other software or solution which may work with WM6 and the D810?
Much appreciated,
~ elroy
did you install any programs on your storage card?
I installed all programs to my phone's memory (although i'm now down to 12 megs left) and haven't had any problems activating the wm5 storage.
Before activating the WM5Storage version 75, you need to:
setting- connections - usb to pc (disable the advanced network functionality)
now activate program and enjoy
PS; what version of Card Export are you using?
Thanks for your replies guys,
I have the latest version of Card Export (3.03). But the same thing happens whether I use Card Export, Wm5Storage (with OR without Card Export installed)... AND with 'Advanced Network Functionality' unchecked.
I can start the application (whichever I'm testing at the time) and attach the phone to my computer - I can even transfer files and do all the things that you'd expect to be able to do in that mode.
However, once I eject the device from the computer and deactivate Card Export (or WM5Storage) the 'X' button (top right menubar) doesn't appear for the next application that I launch, the start menu fails to open too. The only solution I'm left with is to Soft reset the phone.
This only happens immediately after using these applications (Card Export and WM5Storage) and is reproducible, without fail, repeatedly.
My works fine , but only if I activate the wm5storage before connecting to the pc
My mda is dead my display flatcabel is broken...
now i got to recover my contacts that i have saved on my sd card.
any idea how to restore them on pc?
Thanks
If you saved them on your SD card then just put the card into a card reader and copy them to your pc. Another thing, even though your display is dead, you may still be able to access the phone over activesync if it still boots.
I did already hard reset cause in first i meant that it was something wrong with software...
it destroyed all data on phone exept on sd card, i copied backup contacts file on pc but i dont have an idea how to open contacts on pc (is there somme kind of viewer or maybe virtual pocket pc for Xp)? i hear active sync signal when i connect Mda via usb but i dont see anything so i am not able to install anything or to do synchronization. And i still need my contacts...
Help
I've read where you can open the file that had your contacts in it up in a hex editor and it will allow you to view your contacts. Other than that, I don't know of any program that will open it up normally though. If all you're needing to do is see them, then that method should be ok. If you need to do more with them though you may want to explain what program you backed them up with and see if anyone else has any ideas.
By the way, there are programs that allow you to view what you would see on your phone on your PC. If you're still getting a good sync then using one of them should work. Here's the link to one I've tried that works well. - http://www.mymobiler.com/
Hi all
I hope someone can help me with this I'm using an XDa Artemis and I have TT6. I have previusly copied files from the TT6 SD card direct to my storage card on my device and the system picked up the necessary installation files and sorted it from there.
However every now and then when I started TT6 on the device, it would fail to recognise the location of the maps though the software appeared to be working ok. The resolution to this was to re-set the device and wait for it to reload the software. (a bit of a pain but...)
Just lately the device and or TT have failed to start properly no matter what I do. I have tried re-installing the files, I have removed the TT software from the XDa using add remove progs.
I can not now get the Xda to recognise the newly copied files to a newly purchased staorage card irrespective of whether I install to the device direct or to the storage card when installed in the comuter.
My TT home software does not recognise my device and I'm stumped...
Any advice welcome, particularly in relation to getting the TT Home software to recognise my device and allow me to install the software direct from the C rather thn thru the above methods would be great.
Thanks
Pete
check you setting for the GPS Port in the TT& software. the baudrate should be set on standard 4800 and the com port ist Nr. 4 (usually the one at the top. if it still doesn't run, then try hard-reset your pda and also formatting the sd card and start reinstalling the whole TT6 package
Thx for that, yes it's all ok and I had already done all of that except hard reset. (trying to avoid that as I dont want to spend days re-installing all my other apps).
What I've done is purchase a new card, copy the TT^ data across to it and that seems to have worked (fingers crossed). Since doing this my device has only once failed to recognise TT6 so I'm hopeful....
Cheers
Pete