Hi folks!
As some of you already know, I wrote a tool which sets a Wizard to use the WLAN g mode. It also did some other tweaks.
Some people reported the tool also works for other devices, like the Universal and the Axim X51(v). But the additional tweaks of the Wizard Optimizer were specifically for the Wizard.
So now you can download a special version of the tool, which only enables WLAN g.
FEEL FREE TO TEST IT ON OTHER WLAN ENABLED POCKET PCS AND SMARTPHONES!
Tested devices:
HTC Wizard: works perfectly
HTC Universal: claimed to be working, no exact information on this
Dell Axim X51(v): claimed to be working, no exact information on this
How to use it:
-copy the cab file to your PPC
-execute it on the PPC
-wait a minute then (soft)reset the device
I don't take any responsability for damage (lost data) caused by this tool. :wink:
RE
Its no longer there, why???
I don't know why the file was down, but I reupped it. Have fun!
Re: DJVW WLAN 802.11g Activator
djvw said:
Tested devices:
HTC Wizard: works perfectly
HTC Universal: claimed to be working, no exact information on this
Dell Axim X51(v): claimed to be working, no exact information on this
Click to expand...
Click to collapse
acutally on my O2 XDA Exec, the ethernet comms device is called 'tiacxwln1', so im surprised if the cab tested ok on the universal :roll:
i've poked in the registry values as follows (values in decimal):
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS:
DWORD dot11SupportedRateMask=1 (this is already configured on my latest 1.13.82 ROM)
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS:
DWORD dot11SupportedRateMaskG=8
can't say i've noticed getting more than 11Mbps - how do i find out?!
You have to set your router to use only wlan g mode, then you will see if it works.
Thanks for your regentrys, I will add them if it works for you.
RE
Hi!
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS:
DWORD dot11SupportedRateMask=1 (this is already there by default on my QTEK9000)
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS:
DWORD dot11SupportedRateMaskG=8 (added)
I see no difference in speed unless there's some speed test site to try out. My router works in a/b/g modes
I can confirm without a doubt that it doesnt work on my o2 xda exec (HTC Universal)
@FOSA
@ericblong
Did you try to set your Router to G-Only mode by now?
RE
djvw,
Is there a need to set the router to 'G' mode only?
I'm using 'A' mode to connect my router to my notebook. 'B' mode to connect my PPC to the router and 'G' mode for my IP webcams
The modes are auto detectable by the devices
You need to set the router to g-mode to test if your Qtek CAN connect to it in g-mode.
If you leave the setting at a/b/g mode (mixed mode) you have no chance to see if you are connected in g-mode. The device may also connect in b mode without your notice.
It's all just for testing, after that you can set the router back to mixed mode. The Qtek will always try to use the best mode autmatically then.
I have updated the registry and set my router to G only and the Exec (HTC Universal) won't connect - it goes off searching for a 11b network :wink:
Regards,
RE
May be can use this software to determine the data speed
IP Dashboard Network Monitor, here:-
http://www.pocketgear.com/software_detail.asp?id=9463
1. It's old.
2. I think it doesn't show which WLAN mode you are running.
@tony
Did you change the above regkeys or did you install the cab?
It's actually a new version which is supposed to support WM5 and was only released this year.
djvw said:
@tony
Did you change the above regkeys or did you install the cab?
Click to expand...
Click to collapse
Just did the reg keys - I didn't think the cab file was for an Exec...
Regards,
Tried the cab file but still no joy!
Remember, CapNotify.exe doesn't exist on the Exec but shouldn't prevent the other aspects from working but they don't
This on a UK Exec from O2 with ROM 1.13.82 WWE, Radio 1.04.02, Protocol 42.37.P8, Extended ROM 1.13.188 WWE.
Regards,
Same here dont work, added just the reg key, router set to g only mode, exec searches for signal.
Ive done the same as TonyBro & dazzled
IE/ added the registry keys, soft reset, enabled G mode on my router, the exec wont connect, as soon as I enable b/g mode on router the exec connects.
Its a shame, It would have been nice to have G transfers.
Doesn't work on the Alpine either. Knew it wouldn't but worth a try.
Thanks anyway.
Wont connect!
After I installed the cab-file my phone can´t connect to the GSM-net!
I did a softreset, but the phone still did not function until i did a hardreset...
Someone...
Qtek 9100, Sweden
Related
Hi!
Just asking whether anyone tested a wifi 'g' card on his Universal?
Any increase in speed performance and by how much for data transfer?
Thanks
why would you want to do that while you can change the registry and give the universal the power of using WIFI G network ?
RE
I'm thinking of 'g' WiFi it to the Wi-Drive hard disk....later
You're right about the registry change. I'll look into it later
there isn't any registry hack to change wifi to G on a universal it's all bulls...
There is a registry hack to make the universal into a wireless-g device, it just doesn't make it faster than 11 Mbits. It's useful though to find access points that are limited to only seeing g devices. I wouldn't expect an SDIO-g card to make any difference -- certainly web browsing speed would be approximately the same, and you can't use it and put in an SD card so downloading large files is a non-issue. Maybe streaming video, but then, I wouldn't expect the uni to be able to keep up with a full 11 Mbit streaming video in the first place.
That's is what I think too. I'm getting a Exec so I have been looing into this device for a while. Anyway, making the Universal to be able to get the network from a 802.11g is will be so much helpful since there is no much thing requires high data-transfer speed on the Universal like on a normal computer so 11mbps should be just fine.
Quote from msmobiles.com:
Here is description how to do it:
We have tested it with HTC Universal (Orange M5000) and it seems to work!
The test was done in the following way: a Wi-Fi access point that previously was running in 802.11g-only mode, had to be put into dual mode (802.11b + 802.11g) to support Orange M5000 (HTC Universal), but thanks to making the following changes into registry:
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: dot11SupportedRateMask=1
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: dot11SupportedRateMaskG=8
... the HTC Universal is able to access Wi-Fi access point that works in 802.11g -only mode. PHM Registry Editor was used to effect this change (but any freeware or commerical registy editor can do it). As before with HTC Wizard, please note: you must reset your phone after making the changes in the registry!
Credit: Brendon Ranum from UK/New Zealand.
b3n_asian_freak said:
That's is what I think too. I'm getting a Exec so I have been looing into this device for a while. Anyway, making the Universal to be able to get the network from a 802.11g is will be so much helpful since there is no much thing requires high data-transfer speed on the Universal like on a normal computer so 11mbps should be just fine.
Quote from msmobiles.com:
Here is description how to do it:
We have tested it with HTC Universal (Orange M5000) and it seems to work!
The test was done in the following way: a Wi-Fi access point that previously was running in 802.11g-only mode, had to be put into dual mode (802.11b + 802.11g) to support Orange M5000 (HTC Universal), but thanks to making the following changes into registry:
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: dot11SupportedRateMask=1
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: dot11SupportedRateMaskG=8
... the HTC Universal is able to access Wi-Fi access point that works in 802.11g -only mode. PHM Registry Editor was used to effect this change (but any freeware or commerical registy editor can do it). As before with HTC Wizard, please note: you must reset your phone after making the changes in the registry!
Credit: Brendon Ranum from UK/New Zealand.
Click to expand...
Click to collapse
I set it in the registry w/ PHM registery Editor. But I can't connect to G-mode only AP yet. My phone is T-Mobile version MDA pro. Any suggestions? Anyone succeeded to connect to G only AP with Universal?
You can try dot11SupportedRateMask=8 and delete dot11SupportedRateMaskG from registry.
Hi all, for the last few months I have tried various Universal ROMs and even various WM5 phones including HTC and HP iPAQ, there are some commond issues which I haven't been able to figure out a permanent solution (work arounds are available though not ideal), these are:
- SIP (System Input Panel), if you install any additional SIP like SPB fullscreen keyboard, Monster SIP etc, every time after you soft reset the device, unless you load them up straight away, you will not be able to load them up after a few minutes (don't know exactly how long) until next reset!! This is a great pain, I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
- Bluetooth problem with Tomtom 6 (TT6). With lots of AKU versions of WM5 (apart from Helmi AKU 3.3 I tried so far, haven't tried it with Helmi AKU 3.5 though so I can't be sure with that version) every time I start up TT 6 it asks me to enter the passcode to pair my BT GPS receiver again even though I have done it 100 times already!! Again I have seen this issue on other WM5 devices in addition to Universal so I am wondering if any one has a solution.
Thanks!
kevin.jiang said:
- Bluetooth problem with Tomtom 6 (TT6). With lots of AKU versions of WM5 (apart from Helmi AKU 3.3 I tried so far, haven't tried it with Helmi AKU 3.5 though so I can't be sure with that version) every time I start up TT 6 it asks me to enter the passcode to pair my BT GPS receiver again even though I have done it 100 times already!! Again I have seen this issue on other WM5 devices in addition to Universal so I am wondering if any one has a solution.
Click to expand...
Click to collapse
I've never seen this problem on either my Universal, or my friend's Wizard (which I set up for them).
I don't know if this is the "standard" way, but basically, I pair the GPS device (a BT-77 in our cases), and then setup an outgoing COM port to it, and then simply tell TomTom to attach to that COM port. In fact, I have two BT-77s, one set to COM0 in the car, and a hand-held one on COM4, and I can switch to my heart's content, and have never been asked to re-pair.
Cheers,
Steve.
kevin.jiang said:
- SIP (System Input Panel), if you install any additional SIP like SPB fullscreen keyboard, Monster SIP etc, every time after you soft reset the device, unless you load them up straight away, you will not be able to load them up after a few minutes (don't know exactly how long) until next reset!! This is a great pain, I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
Click to expand...
Click to collapse
I know many SIP can not be able load out. Did you solve this? or how to load them with permanent solution?
kevin.jiang said:
I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
Click to expand...
Click to collapse
i've installed a hebrew sip but i dont have a problem loading it anytime i want.
although, sometimes i have a problem composing a new text message. the device gets stuck sometimes if the keyboard it not opened when i click "new".
happends only with helmi's 3.5 and with the hebrew keyboard. doesn't happen with default SIPs.
whats te program you found to load the all the SIPs?
is it "SIPz"? (from the same maker of PQz).
I have the same problem with blue thooth and CoPilot I use. The software is iGo. I tried several roms, but after I switch off the GPS and switch it on, it always wants to pair with Uni again.
StevePritchard said:
I've never seen this problem on either my Universal, or my friend's Wizard (which I set up for them).
I don't know if this is the "standard" way, but basically, I pair the GPS device (a BT-77 in our cases), and then setup an outgoing COM port to it, and then simply tell TomTom to attach to that COM port. In fact, I have two BT-77s, one set to COM0 in the car, and a hand-held one on COM4, and I can switch to my heart's content, and have never been asked to re-pair.
Cheers,
Steve.
Click to expand...
Click to collapse
Thanks for the suggestion Steve, I have indeed paired the BT GPS receiver, created the outgoing port as COM4 (actually I also tried other available ones) and point TT6 to it. I have been using this BT GPS receiver for over 2 years with various devices including my good old HP iPAQ H4150. This problem didn't happen with my Universal's original Orange SPV M5000 ROM and it doesn't happen with Helmi's AKU 3.3/3.5 ROM either which is the main reason why I am using AKU 3.3 now.
I have this problem on JWright's i-mate AKU 3.2 ROM, my wife's HP iPAQ rw6828 (WM5 AKU 2.3), my friend's T-Mobile MDA Vario II (HTC Hermes, WM5 AKU 2.3).
vuquan said:
I know many SIP can not be able load out. Did you solve this? or how to load them with permanent solution?
Click to expand...
Click to collapse
No good solution and I am wondering if anybody else knows how to solve it. I have tried hacking the registry to make my additional SIP default and I ended up with my universal not being to boot until a hard reset. The work around is this SIPChange attached, basically you set which one you want as default, then every time you soft reset it loads that SIP automatically before it becomes impossible to load it.
kevin.jiang said:
Thanks for the suggestion Steve, I have indeed paired the BT GPS receiver, created the outgoing port as COM4 (actually I also tried other available ones) and point TT6 to it. I have been using this BT GPS receiver for over 2 years with various devices including my good old HP iPAQ H4150. This problem didn't happen with my Universal's original Orange SPV M5000 ROM and it doesn't happen with Helmi's AKU 3.3/3.5 ROM either which is the main reason why I am using AKU 3.3 now.
I have this problem on JWright's i-mate AKU 3.2 ROM, my wife's HP iPAQ rw6828 (WM5 AKU 2.3), my friend's T-Mobile MDA Vario II (HTC Hermes, WM5 AKU 2.3).
Click to expand...
Click to collapse
I've not had the problem with either of the O2 ROMs, and Ivan's AKU3.5 test ROM - I haven't tried any other ROMs. I unticked the "secure connection" - not sure if that's relevant or not.
I found that only COM0 and COM4 seemed to be available for outgoing ports.
Before you go into TT6 - is the GPS device in the device list, along with the outgoing port set up correctly? Do you switch BlueTooth on and off? I have it on all the time - I'm just trying to think of things that might be different in our configs.
Cheers,
Steve.
I have both TT6 and iGO 2006 on my XDA Exec. The TT6 (and TT5 before that) always worked well with the BT-77 by simply pairing the GPS to the XDA EXEC on a COM port and selecting that COM port in TT6.
With iGO 2006, on the same XDA EXEC, it will ask to pair the BT-77 every time I launch iGO 2006. The only solution I could find was to use Franson's GPSGate to create Virtual COM ports for the BT-77 and to select this virtual COM port in iGO 2006.
StevePritchard said:
I've not had the problem with either of the O2 ROMs, and Ivan's AKU3.5 test ROM - I haven't tried any other ROMs. I unticked the "secure connection" - not sure if that's relevant or not.
I found that only COM0 and COM4 seemed to be available for outgoing ports.
Before you go into TT6 - is the GPS device in the device list, along with the outgoing port set up correctly? Do you switch BlueTooth on and off? I have it on all the time - I'm just trying to think of things that might be different in our configs.
Steve.
Click to expand...
Click to collapse
Thanks for the advise, I have tried unticking "secure connection" as well and it didn't help.
From what I am gathering in the information supplied it looks to be caused by a combination of the BT GPS receiver, the WM5 and the Sat Nav software.
I can't remember what make and model my BT GPS receiver is because I bought it over 2 years ago and back then I didn't care what model it is. Now that I can't tell it from looking at the outside of this thing.
This is a wierd problem as with different combination of the GPS reciver, WM5 and software it may or may not happen. What I was having that problem using Tomtom 6 I tried the GPSInfo shareware and it didn't ask me to pair every time. Very strange, anyway I am alright now with Helmi's AKU 3.3 using COM5 as the port with my good old BT GPS receiver and TT6.
kevin.jiang said:
No good solution and I am wondering if anybody else knows how to solve it. I have tried hacking the registry to make my additional SIP default and I ended up with my universal not being to boot until a hard reset. The work around is this SIPChange attached, basically you set which one you want as default, then every time you soft reset it loads that SIP automatically before it becomes impossible to load it.
Click to expand...
Click to collapse
Thank you so much! it work on my device.
Indeed clicking as much as one time on "Bluetooth Explorer" will cause TomTom not to function properly any more (maps/voices not found etc.).
I have learnt that the hard way!!!
Many members of this forum speculated that the Artemis SD card housing is somehow related to TT's maps to vanish.... NOT TRUE!!!
After a hard reset I have tested that TT was fully functional and I have (intentionally... just to find out) clicked on Bluetooth Explorer and BINGO the TT6.1 maps&voices are GONE!!!
If some of the forum experts would happen to read this and would feel like giving instructions to disable Bluetooth Explorer it would be very helpful.... this will surely avoid SEVERAL hard resets to many people.
I have read that one should go to Settings/Connections then select the FTP tab and uncheck "Enable Bluetooth Explorer" but this is not to be found on my ARTEMIS (P3300)... Let's see if somebody will find a moment to share his/her wisdom with the rookies and shed some lights on this annoying problem.
Cheers!
SiperX
On my Orbit you do the following to disable the Bluetooth Explorer
Settings / Connections / Bluetooth / FTP (tab)
Then select or de-select Bluetooth Explorer.
I appreciate your kind reply Patrick but as you can read in my thread this path (Settings / Connections / Bluetooth / FTP (tab)) is not available in the Artemis/HTC P3300.... Anybody else?
Do you have a comms manager? If so you can access the ftp option of the bluetooth settings from here.
TomTom and Bluetooth explorer both work on my xda orbit.
herghost, what version of TomTom are you running?
I m unable to have Bluetooth Explorer enabled on my Orbit, and get TomTom to find the maps. I am running ver 6.02
perfect, i wasnt able to make tomtom recognize maps on orbit(on universal it works w/o probs) i switched bt expl. off and it works. thx
Guys, there is no doubt. TT (mine is version 6.1) and BT Explorer are NOT going to work together! I am glad to hear that phsnake could get his orbit to resume TT functions.... And (also) I found out that my old rom (the one originally shipped with the P3300) had the path (Settings / Connections / Bluetooth / FTP) to disable BT Explorer (as Patrick_UK explained) ... but the one I am using now does not offer the chance to enable/disable BTE.... any registry master would be kind enough to offer his/her expertise to make this possible? I am not so keen on editing the REG unless I know exactly what has to be done
rom 1.28.0.0 wwe
rom date 11-06-06
radio 02.69.90
protocol 4.1.13.30
ext. rom PDAMobiz.com
SiperX:I'll try today to find reg solution, i cannot promise anything, but i'll do reg export with btexpl. switched on, then with switched off and compare reg.files. hopefully i'll find the right one key.
Phsnake, this sounds like a great idea! Thanks in advance!!! I really hope that you can succeed and give me support in this matter.
By the way where did you find the rom (ROM: DOPOD IPL: 1.25.0001 SPL:1.27.0000 GSM: 2.69.90 OS:1.28.0.0 WWE) you are running now? It sounds lke the right one for my T-Mobile Artemis.
so i compared the regs and diff follows:
Code:
[HKEY_CURRENT_USER\Software\HTC\BluetoothFolder]
"EnableClient"=dword:00000001
"HDEVICE"=dword:00031380
[HKEY_LOCAL_MACHINE\Drivers\Active\68]
"ClientInfo"=dword:00000000
"Hnd"=dword:00031380
"Key"="Drivers\\BlockDevice\\BTDisk"
"Name"="BTD1:"
i guess all U need 2 do is change "EnableClient" from 1 to 0. try it and let us know. (i can disable it thru bt settings). or remove above posted reg entries.
ROM:its standard dopod shipped(the latest one) should be on wm-gurus.com
Thanks man! The registry editing you suggested worked and the BT Expl. is now OFF and TT finds the maps again!!!
But the option to enable/disable the BT Expl. (via BT settings as you say) is still not available any chance you could send me a screenshot of your reg for both [HKEY_CURRENT_USER\Software\HTC\BluetoothFolder] and [HKEY_LOCAL_MACHINE\Drivers\Active\68]?
For your Dopod rom, could you please give me a precise link where I can download it? I could not find it at wm-gurus.com.
Thanks a lot
ftp.wm-gurus.com/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
yes i know that wont allow u to switch off btexpl. thru bt control panel.
Here are regentries U requested, but i dont think it'll help. but try.
Thanks again!
BTW, the same file (ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe) was available at XDA too.... I have tested it a few weeks ago it and -being an AU (Australian rom) my sim (Dutch T-Mobile) did not get registered as the operator is apparently not quoted .... strange that you can use it in Scotland.
For regs I will see what I manage to put together and will let you know... Great (and prompt) support was very appreciated...
Hi again,
I have flashed once more the ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe onto my Artemis and I have (FINALLY) noticed that the SIM does register and I am able to use the phone (incoming & outgoing calls).
The only problem is that every time I reboot I get a notification from the "NETWORK WIZARD" which says "your current operator (20416) is not supported. You should obtain an update from your device vendor".... Any idea how I can get this nag off my back?
Thanks
try to check \windows\startup
I have deleted (& made a copy for backup) these 5 files:
netwiz.cpl
netwiz.dat
netwiz.exe
netwiz.exe.0404.mui
netwiz.ini
from the Windows folder of my Artemis.
After rebooting the Network Wizard notification does NO LONGER pops up!!!! So I would say "Problem solved", right?
I am glad that -thanks to the recent communications we exchanged- you "inspired" me to give one more try to the Dopod rom and I finally seem to have found what I wanted.
Only one final point: In other roms if you click on the phone signal bar you get the option to turn on/off the flight mode and if you click on the icon on the right of the phone signal bar you culd turn on/off the WiFi... in this rom you get a small (blue) Comm Manager link to follow in order to enable/disable these functions.... did you find any faster ways to activate WiFi or Flight mode? May be they can be added to the voice commands?
Cheers
u can use phonealarm-some skins supports one click wifi, gprs,btooth switch,
I saw phonealarm but I have decided to spend the end of the weekend configuring my newly installed rom (immediately after I will make a Sprite backup) and along the way try to think of something to keep to a minimum the amount of additional SW installed. What do you think if I use "tray launch", would that allow me to make the necessary shortcuts?
By the way (with previous roms) I kept my Artemis overclocked at 240 Mhz and it was pretty stable, did you test any higher frequency on the Dopod rom?
Microsoft are going to release WM6 with the ability to enable (DUN) for legacy devices, I.e. TOMTOM GO series... are there any cooks interested in releasing a ROM with this option enabled?
this would be great. if this was done i would have nothing to complain about with wm6
Same here, it's just the final thing I need for a perfect WM6 ROM.
One vote more
Same, here. I also tried to use DUN on WM6 with TomTom Go. But apparently WM6 lacks DUN support in Bluetooth Stack.
Does anyone have a fix for this or is there any good WM6 Rom out there with Bluetooth DUN support?
Yes-Sir-Eee
I would love to see that, my 910 won't use the services without DUN...
I was browsing earlier and I think I saw a .cab file in the Wizard forums for PAN support in Windows Mobile 6, however I don't think that anyone said that it worked.
Really?
Point me in the right direction & I'll happily give it a whizz...
Cheers,
mccreath said:
Point me in the right direction & I'll happily give it a whizz...
Cheers,
Click to expand...
Click to collapse
I downloaded the CAB from here, and installed on my Wizard. It says it installed but does not work.
Here's some more info:
http://forum.xda-developers.com/showthread.php?t=307235&page=2
I can confirm this fix
Used trinity files posted by MuN on the above thread.
heres what i did
Installed cab - soft reset
pasted all files from zip in windows folder - soft reset
then unpaired tomtom 910 and reparied, hey presto it found DUN support
Perfect, have been waiting for a fix for this
I've run the .cab and copied the files into the Windows directory, however I'm having a real headache trying to configure a data connection.
Which device to choose for TomTom GO 910?
@the.drone
I followed your instructions and now my TomTom reports that my phone has DUN capability. Problem is HTC TyTN or HTC Hermes ist not listed as phone in the phone list and automatic configuration does not work.
Can you please give instructions which phone to use or how to configure the data connection manually? Because DUN support which can't be configured is as good as no DUN support.
Thanks a lot.
Marc
it just worked first time automaticaly with mine, maybe i was just a fluke but it found the data coonection first time on 3g
How can I find out my TomTom thinks my phone has DUN?
Edit: when I try to add my TomTom to my Hermes, it only brings up a handsfree tick box, when in Windows Mobile 5 I think it also brought up two additional tick boxes. Any ideas if this is following the path to success of if I've screwed up?
Double post.
DUN Doin' it
Will be giving it a go first thing in the morning.
Cheers for the update, will post results....
Bargain!
You eff-ing ROCK... DUN on WM6.
My TomTom 910 loves you!!
Hoo-haa!
How did you get it to work?
So can someone share how they did it?
I followed the instructions and it now finds my ttg 300, and says it has the services - but can't set up the actual DUN connection either manually or automatically!
Any ideas?
Matt
I really am sorry to be a pain in the butt, but I'll outline what I've done.
1). Paired my Hermes up with my TomTom 910.
2). Run the .cab.
3). Soft reset.
4). Copied the files into the Windows directory of my Hermes via the storage card.
5). Soft reset.
6). Repaired my Hermes and TomTom 910 after having deleted the previous connection. At this point it says "The following features were found: Hands-free calling, Wireless data connection, Phonebook".
At this point I try and setup a data connection that it hits the fan. It's really annoying because it feels like I'm falling at the final hurdle. I also wondered if I was struggling because of an issue with connecting to the T-Mobile network, however am I right in thinking that mccreath's using a T-Mobile GPRS contract SIM connection?
In order to fix my buggered wifi problem I purchased a 'G' sdio wifi card from spectec. I thought I would post my experience.
The card does work! It has good speed (perhaps fitting the 'g' rating, but I am not sure) and EXCELLENT range (compared to my old Dell CF wifi card in my Axim X5 anyway).
The only problem with it is that if the unit powers off or if you remove the card, you must soft-reset to gain access to the wlan driver again. The card will power up and flash, but there will be no connection... in fact the WIFI utility will not even open until you soft reset. All I do is run WIFIfofum and keep the card alive all the time.
BTW, if you use POCKETLAN with this, you can map a folder on a file share and pretend it is your missing SD storage card. Works quite nicely.... My plan is to buy a BLUONYX (when the come out) and use it as a massive SD Card replacement.
Vomithaus said:
In order to fix my buggered wifi problem I purchased a 'G' sdio wifi card from spectec. I thought I would post my experience.
The card does work! It has good speed (perhaps fitting the 'g' rating, but I am not sure) and EXCELLENT range (compared to my old Dell CF wifi card in my Axim X5 anyway).
The only problem with it is that if the unit powers off or if you remove the card, you must soft-reset to gain access to the wlan driver again.
Click to expand...
Click to collapse
wow you must really need wifi to make you buy a separate one...
but the problem with the wlan driver losing access when you power off the device or after turning it off is actually ROM dependent....
thanks for the info anyway regarding the card
Yeah. It seems to have something to do with keeping the driver alive and getting confused with the built in driver when it is time to revive it. Often WIFI comes back in the 'on board' form. I have been toying with the idea of just swapping the names of the drivers in the registry...
WIFIFOFUM2 does a pretty good job (if I remember to start it). The only drawback is battery power is lost.. (you cannot remove the card, even with it running).
I don't how anyone can live without WIFI on these things... there are just so many uses for it...
Skype... web surfing... syncronising podcasts directly...a whole host of lan services...vnc... windows terminal services...
I do a lot of support work now at home... I just carry my VNC or WTS connection around with me instead of being tied to a desktop/laptop... it's great!
i forgot to mention that it does not work in wm6. i tried. the driver locks up on install.
Really? I didn't realize that was an SDIO slot. Thanks for letting me know, the wifi on my uni is dead too, and i was thinking about buying a new phone. hehe
Is it Spectec SDW-821 SD WiFi Card 802.11b/g ?
I find black one (http://www.mobileplanet.com/p.aspx?i=132725) and blue one(http://www.buygpsnow.com/spectec-sd...821-sdio-wireless-lan-retail-package-613.aspx) in internet , does it make any difference?
I found blue one is always cheaper than black one while searching internet.
I'm palning to buy one since my O2 XDA EXEC WiFi has poor reception,. and I need to get better option.
It says Transfer data rates is up to 54Mbps at 802.11g, so I'm hoping I get faster speed, and range.
Any updates on this?
Vomithaus said:
...
The card does work! It has good speed (perhaps fitting the 'g' rating, but I am not sure) and EXCELLENT range (compared to my old Dell CF wifi card in my Axim X5 anyway).
...
Click to expand...
Click to collapse
I have an Qtek 2020 with PPC 2003 (ROM v1.75.103) on it and I just bought a Spectec SDW 821 b/g WiFi Card. It seems as if I can connect to my WLAN (it says 'connected' in the Settings menu) but when I for example start Pocket Internet Explorer I cannot surf the internet, because it says there is no connection??? When I then want to configure the connection I only cannot choose WLAN...
Any idea?
deschman said:
I have an Qtek 2020 with PPC 2003 (ROM v1.75.103) on it and I just bought a Spectec SDW 821 b/g WiFi Card. It seems as if I can connect to my WLAN (it says 'connected' in the Settings menu) but when I for example start Pocket Internet Explorer I cannot surf the internet, because it says there is no connection??? When I then want to configure the connection I only cannot choose WLAN...
Any idea?
Click to expand...
Click to collapse
It's a ROM related problem. I'm currently running c_shekhar's 6.1.1b version with a Spectec 820 b WiFi card without problems. See the c_shekhar's Himalaya (Qtek 2020) ROM forum here:
http://forum.xda-developers.com/showthread.php?t=369701
The 'b' version is not available anymore and some people complain about the 'c' version with the Spectec card, but try it out first. Maybe c_shekhar can send you the 'b' version to you personally.
Thanks for your reply. I hoped it could get it working without the scary flashing thing (). I will think about it...
Qtek 2060 (HTC Himalaya) SPV M1000
Insert Coin said:
It's a ROM related problem. I'm currently running c_shekhar's 6.1.1b version with a Spectec 820 b WiFi card without problems. See the c_shekhar's Himalaya (Qtek 2020) ROM forum here:
http://forum.xda-developers.com/showthread.php?t=369701
The 'b' version is not available anymore and some people complain about the 'c' version with the Spectec card, but try it out first. Maybe c_shekhar can send you the 'b' version to you personally.
Click to expand...
Click to collapse
Hello folks,
fist of all, , i appologies about my "rusty English language, quiet long time indeed, i dont practice... anyway !
Well , just buy some Spectec card b/g SDIO bluecard format, and some spectec GPS receiver to give some wifi and GPS connections to my old but nice Qtek2060 , my configuration is like deschman one: let see some details about it:
Qtek 2060 "Orange" SVP M1000
WM 2003: 3.66.2.238
rom ver: 1.66.02FRA
rom date: 02/23/04
radio ver: 1.10.00
protocol ver: 1337.18
extrom ver: 1.66.238
cpu: Intel(r) PXA263
speed: 400 mhz
ram: 128 mo
flash: 32 mo
flash chipset: 28F128K3
data bus: 32 bits
memory size: 14.57 mo
LCD: 240x320 TFT
colors: 65536
model n°: PH10A
ppc
IMEI: ***************
as you can see, i update the rom and the radio, and get better results
i was thinking: great ! gonna install the c_shekhar's Himalaya ROM, then get some cool new stuff
i tried to upgrade with the: WM6.1 AKU1.0(build 19199) RAMDisk-16MB Pagepool size-32MB for Hima(Updated 23.03.08), but with no succes. (in fact, the program does not install at all)
any suggetions, please ?
all answers, appreciated, thanks,by advance
hi,
I answered myself for the previous message, the problem is that, with an integrated USB bridge facade of my tour, deploiment of packadge did not take place as required,
morality: Always check your USB connection is directly connected to a USB port.
otherwise, everything works very well, no incompatibility, or problems, great!
Registry trick to fix WIFI
This is a trick to fix my O2EXEC. The internal WIFI died, so I bought a SPECTEC 11G SDIO wifi card. It works with WM6, however when you power off the machine the wifi stops working. You have to reset with the wifi card in to get it to work again. I suspected that it might be a problem with the old driver for the built in wifi....
I got a registry editor (REGEDITCE c1.2) and found all the references to TIACXWLN.DLL and changed it to point to WLAN11G.DLL
goto
HKEY_LOCAL_MACHINE
then
COMM
then
TIACXWLN
edit
IMAGEPATH
to say WLAN11G.DLL
then do the same on
TIACXWLN1
I have not tested too much, but initially it seems to survive a power down and a card replacement.
I have been testing for a few days now and it is working great. a few seconds after inserting the car, it connects.... and even shows the icon (which was previously there only when the built in wifi was on)
Vomithaus said:
I have been testing for a few days now and it is working great. a few seconds after inserting the car, it connects.... and even shows the icon (which was previously there only when the built in wifi was on)
Click to expand...
Click to collapse
Where can I buy products from this company ?
thank you