Related
I cannot stand the installation procedure needed for the screen protectors. Every single time: I use the "provided micro fiber" cloth to remove dirt and lint and the apply. EVERY TIME I am left with tiny lint,, micro specs of air dust etc. between the film and the screen, and a small little bubble here and there. It drives me crazy. Call me obsessive compulsive but it take me about 3 screen protectors until I finally get it right. Anyone aware of any screen protection technology that will help me avoid this outcome?
I don't, but I did read that if you apply it in the bathroom after running hot water and steaming it up real good that it will help that problem a lot. I plan to try that when I get my first screen protector this week.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hard type screen protectors will solve your bubble issues. Martin Fields screen protectors is pretty much impossible to have bubbles stuck inside it.
However it won't solve your dust problem. If anything, it's much easier to see dirt and other imperfections stuck between the screen and a Martin Field protector.
Or you could try one of the crystal screen protectors from boxwave. I had your problem too with my first 2 screen protectors, and it seemed that I couldn't just get them on there without a problem. With this one from boxwave, I just wiped it off with the provided micro-fiber cloth and used the bubble-elimination card to remove any possible bubbles under the screen!
http://www.boxwave.com/
Get the ones from ATT. I have tried Bodyguardz, Zagg, Stealth Guards, and some generic BS from eBay. All of those were the type you apply with the solution (and have that dreaded orange peel look) and you have to wait for it to "cure" and it is extremely easy to get bubbles stuck in them.
The ones from ATT on the other hand, are completely smooth and truly invisible. They are a stiffer material and you do not need application solution. I am very happy with them and for 9.99 you get 3 of them. If you mess one up by getting some lint on it or whatever, you can just wash it with soapy water and spray it down with some water+baby soap and re apply it that way. Very easy to get the air bubbles out that are caused by using the solution. Again, they can be installed with no solution at all and if done carefully, it should look like nothing was ever installed on the phone
http://www.wireless.att.com/cell-ph...038&q_sku=sku4770252&q_manufacturer=&q_model=
I got them from a local store for 7$ since I got a discount. Those above ^^ from BoxWave seem extremely over priced. For 10$ you can't go wrong with the ones from ATT.
I am using clarivue not even a single dust, lint, inside. It's the quick and easy 3 layer type screen protectors.
Here's a tip ... go to the bathroom and turn on hot water on sink or whatever to create humidity that would trap the dust or w/e in the air ... and it makes this easier to apply.
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Siks said:
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Click to expand...
Click to collapse
+1
I had my iPod Touch for years, in and out of pockets with keys and pocket-knives and cell phones, dropped countless times, two little kids messing with it all the time, accidentally sliding it face-down across surfaces, and so on. Never used a screen protector, never got a single blemish or scratch. And that was basically plain old arsenic-free glass. The Captivate is made with Corning's high-tech Gorilla Glass.
Sure, either could still scratch or break. But it's like getting a car with an expensive paintjob, and then covering the whole thing in Scotch tape so it won't get scratched. You end up with something that looks god-awful 100% of the time, because you're afraid something might happen to it that would affect how it looks. Pretty much any time someone hands me their smartphone or DS, it is a scratched, smudgy, dusty mess because of some $40 screen cover they have on there. I always try to point out that it seems odd to make your screen look terrible on purpose just because you're afraid of you might make it look terrible on accident. I used one good one once, that you couldn't even tell was there, but the first time I took it on a flight it turned into smears of rainbows.
use a piece of clear packing tape to remove the dust. running the shower helps bring dust down but there will be some lint from the cloth. dont lean over it, a lot of "dust" is dry dead skin or dandruff so if you have dry skin or dry scalp dust will fall on it. also stop being so anal.
Siks said:
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Click to expand...
Click to collapse
+1
I don't need no stinkin' screen protector. I mean unless I know my phone is going to be dragged across macadam but then a screen protector won't help, will it.
Gorilla Glass... Screen Protector unnecessary... I have always used a screen protector too on previous phones but the screen on this phone is rugged.
I used to be the same way as you guys, "I don't need a screen protector because it's been through everything and still works perfectly!!" Yet, one day I found a scratch on my screen that I have no idea whatsoever where it came from. So, I got this Boxwave ClearTouch Crystal screen protector, and you literally cannot tell it is on there. It feels just like the glass (con for me actually, I prefer a paper kind of feel) and doesn't scratch easily at all. Plus, I installed it in a dusty room and there was no lint or anything else under the screen. It even comes with a thick card to remove bubbles once it has been applied. So, if you're even slighty, .000001% scared of getting lint trapped underneath the screen, go with Boxwave. I vouch for its clarity and ease of installation. Also, my screen is just as sensitive as before, as I've tried BARELY touching the screen and it still would pick up a touch.
And, in the rare event that you did get dust glued to the screen, it is completely washable and rewashable, so it is a little expensive, but well, well worth it.
Oh, and there is no adhesive whatsoever, not even water is needed. Just peel and go.
magnumrt562 said:
Gorilla Glass... Screen Protector unnecessary... I have always used a screen protector too on previous phones but the screen on this phone is rugged.
Click to expand...
Click to collapse
i listened to this
totally terrible advice. not that i care but i have about 20 microscratches and a couple decent sized ones....
it takes time to learn how to put screen protectors on... I have probably put 500 or so on all different types of phones you just wipe it clean tilt it so that you can make sure there are no dust particles... then you pull the backing off of the protector a few inches apply to the designated area and take a credit card and follow the rest of the protector down... works everytime
iamamp3pimp said:
i listened to this
totally terrible advice. not that i care but i have about 20 microscratches and a couple decent sized ones....
Click to expand...
Click to collapse
I second this . there is no such thing as 'unscratchable glass' some very expensive sunglasses use to have that warranty , guess what , they dont anymore ...
although I have to say the argument about HAVING YOUR PHONE LOOK UGLY JUST IN CASE SOME ACCIDENT CAN HAPPEN TO MAKE UGLY made me laugh , I d never have a phone without one my advice :
Just buy a few cheap ones on eBay and master the trick when your bored , after 3 times it should be installed perfectly , I also noticed if you have light scratches already on it , the screen protector hides them so thats a bonus
Ive tried SO many screen protectors. The only one I have been happy with so far (and VERY happy at that) is Realook. They are SUPER clear, thin, and very hard. You do not lose the glassy feel or the crisp vivid look on the screen. Ive put them on a few phones now, a few Vibrants and a Mytouch Slide 3g (my gf didnt even know i had put it on there till i told her). Its $10 for 2 protectors and I HIGHLY recommend them.
http://cgi.ebay.com.sg/REALOOK-AT-T-Samsung-Captivate-AFP-Screen-Protector-2PK-/250674134359
Siks said:
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Click to expand...
Click to collapse
I have a tiny little chip right in the middle of my screen on my Captivate about a cm underneath the AT&T logo. It has taken less abuse than yours, and it even has a screen protector on it. It looks like the kind of chip you would get if a piece of gravel hit your windshield a little too hard.
Your mileage may vary.
Hydrocharged said:
I used to be the same way as you guys, "I don't need a screen protector because it's been through everything and still works perfectly!!" Yet, one day I found a scratch on my screen that I have no idea whatsoever where it came from. So, I got this Boxwave ClearTouch Crystal screen protector, and you literally cannot tell it is on there. It feels just like the glass (con for me actually, I prefer a paper kind of feel) and doesn't scratch easily at all. Plus, I installed it in a dusty room and there was no lint or anything else under the screen. It even comes with a thick card to remove bubbles once it has been applied. So, if you're even slighty, .000001% scared of getting lint trapped underneath the screen, go with Boxwave. I vouch for its clarity and ease of installation. Also, my screen is just as sensitive as before, as I've tried BARELY touching the screen and it still would pick up a touch.
And, in the rare event that you did get dust glued to the screen, it is completely washable and rewashable, so it is a little expensive, but well, well worth it.
Oh, and there is no adhesive whatsoever, not even water is needed. Just peel and go.
Click to expand...
Click to collapse
Thanks for the info on the Boxwave screen protector, I've been wandering if it's as good as it looks.
In the malls near me now, there are little carts (you know those areas of the mall, where the cart/carny people are) that have people with small steady hands...
Invisible Shield it is called. They give you a lifetime warranty on the cover. They put it on. They will even cover your entire phone if you want (the back of the Captivate I am thinking of getting covered to avoid scratches on the metal back), and if you get a replacement phone for some reason, you only pay a portion of the price (material only) and they put it on again.
They use some sort of silicon liquid (snake oil... was probably just water) to aid in putting it on, and mine is perfect. Had a couple bubbles with the liquid still in it, but true to their word, it evaporated (through the protector) and it was perfect the next morning.
I jumped at this opportunity after totally FAILING at putting on a protector on my Tilt 2 (two packs of 3). On that phone, I took an exacto knife to cut off the excess I was so bad at it. I gladly paid $20 to have someone else do it and give me a warranty on it.
Invisible Shield. Check out your local mall.
Jeepsdaddy said:
I cannot stand the installation procedure needed for the screen protectors. Every single time: I use the "provided micro fiber" cloth to remove dirt and lint and the apply. EVERY TIME I am left with tiny lint,, micro specs of air dust etc. between the film and the screen, and a small little bubble here and there. It drives me crazy. Call me obsessive compulsive but it take me about 3 screen protectors until I finally get it right. Anyone aware of any screen protection technology that will help me avoid this outcome?
Click to expand...
Click to collapse
I think the gorilla glass is pretty resilient. Check out this youtube vid.
http://www.youtube.com/watch?v=6xASJobjD68
I tried to use them, I really did. The first one was a zagg and it wasn't a very good experience. The screen was rubbery and got scratched up within 2 weeks. So I removed it and just left my seidio case on for a few months. No scratches at all. Now I just got an otterbox impact case and came w/ a nicer screen protector. I put it on, but the lint underneath the screen was driving me crazy. I tried cleaning it off and made it even worst! Is anyone else just rockin it with just a case? I'm done w/ screen protectors.
I used my phone for months without a screen protector until the OB Defender(waste) came out.
I do agree with you that the lint and dust is utterly frustrating. you almost need a clean-room with a surgeon to get the damn thing on right. I can't remember who suggested it, but they said if you take your phone into the bathroom after a good, hot shower, the moisture in the air will keep dust from floating around and you'll get a real clean protector.
i will tell you this, like i said, i rocked my phone for months without any protection. then one day i slid it into the same pocket as my car keys and received a nice long scratch along the length of the phone.
I use the otterbox one and I love it. You really can't tell that there is even a screen protector on the phone. You just gotta be very careful when you put it on. I have gotten really good at it, mine is perfect- not a bubble, spec of dust, scratch, etc...
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Wish I posted here first before applying the screen protector. I'll just have to baby it for now.
If you are going to use one of the ones made with the military grade polymer, bodyguardz is one of the better ones. It doesn't have the orange peel feel to it and they have a dry apply version.
I use steinheil too. The shower method is a little excessive tho. Just get a couple pieces of tape and dab around the whole screen to remove as much lint as you can, apply the protector and if there is still lint under use a strip of tape to life the protector and another piece to remove the lint.
spankmaster said:
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Click to expand...
Click to collapse
I started using them and love them. IMO one if not the best out.
You just have to take your time. You cant tell mine is on.. I have used the anti fingerprint anf liked it a lot, but im using clear now and love it.... I wont go to the wet apply again.
Sent from my PC36100 using Tapatalk
I hate the glass. I like the plasticy rubbery feel of zagg. My hand can slide and there's no smudges or prints on. Amaxing
A drop of Chuck Norris's semen was placed on the IPhone. We now have the Htc Evo.
Just FYI, I found a screen protector that I swear buy. It feels like glass, like the original screen. I dont know how scratch resistant it is but after a few months I'm still scratch free. Also I put one on my wifes phone. They come in a three pack off Amazon for $7 and some change shipped. It's worth giving a shot. Here's the link- http://www.amazon.com/gp/product/B003T1WI02/ref=oss_product
mob87 said:
I use steinheil too. The shower method is a little excessive tho. Just get a couple pieces of tape and dab around the whole screen to remove as much lint as you can, apply the protector and if there is still lint under use a strip of tape to life the protector and another piece to remove the lint.
Click to expand...
Click to collapse
That's pretty innovative! I'll remember the tape trick next time. Thanks
I like Zagg InvisibleShield on my EVO. I had to order a replacement since I messed mine up with attempting to put on the front of a DecalGirl skin (pain in the butt).
I know I would have a hard time doing it myself so I had Best Buy install the last one and probably do my replacement. Yeah, they charge $8 but both times on my EVO and on my father's new android upgrade were perfect. No air bubbles, no trapped dust, dirt, and grim under the screen protector.
Check my Signature for a great option for screen protectors. They used to only have one type, now you can get a whole lot of options. I love them! I used the shower method too, and it worked great for me. Still on my first one - 4 months and counting.
jedwardmiller said:
Check my Signature for a great option for screen protectors. They used to only have one type, now you can get a whole lot of options. I love them! I used the shower method too, and it worked great for me. Still on my first one - 4 months and counting.
Click to expand...
Click to collapse
Are there scratches on ur screen protector? That's the other thing that drives me crazy.
I personally have to have a screen protector mainly due to my job . I work in the service department of a heavy equippment dealership . Besides being around dust and dirt and parts being ground down there is no telling what my fingers will pick up . I went with no protector at first and thats when I got my first two scratches . Had the invisible shield installed and scratches got covered up . Point of the story is , depending on your field of work and what you are exposing the phone to pretty much determines how well your screen is gonna remain scratch free . One thing that does irritate me to some extent . I had a Blackberry Storm that remained scratch free and never had a screen protector on it .
spankmaster said:
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Click to expand...
Click to collapse
Going to give my vote to the Steinheil too. First off, I started out with a Zagg but could not stand the rubbery feel. In addition, I also use my EVO as a music player when I work out (I have an armband case that has a plastic cover on it) and every time I pulled the EVO out of the case after the workout, it would pull the Zagg cover off. PAIN IN THE *SS! I got so tired of it happening, the last time I just crumpled up the Zagg and tossed it in the trash. At that point, I was ready to go with a NAKED screen but had to remind myself that I was on my second EVO. The screen on my first got scratched 3 days after I brought it home (Don't even know how... with a 20-month old running around at home, could have been anything).
Now, going back to the Steinheil - I read reviews of it on Amazon and everyone raved. It was somewhat affordable so I thought, why not. After applying it, I have to say it's pretty awesome. Does it feel like glass? Not in my opinion - it feels "silky" but not SMOOTH like glass (does that make sense?) More importantly, it doesn't feel like rubber like the Zagg. And a fringe benefit, it does a great job of keeping off the fingerprints! And how about working out? I've used put in the armband case now 4X and it hasn't come off once. With the Zagg, I've had to reapply it 4 times!
So, my vote is for the Steinheil too... (BTW, they give you two in a case so you can try and find someone to split the costs with you if cost is an issue).
Boxwave screen protectors are the way to go. The crystal ones are awesome
Sent from my PC36100 using XDA App
I buy the cheap ones from China on ebay and they seem to work fine. I usually just buy them in bulk for like $10 and stash them. I replace them every couple of months once they get scratched. I swear by the shower method in the bathroom, always have a clean application.
I initially had a zagg screen protector but it was GARBAGE. I ripped it off after 2 days of having it. I ended up getting a privacy screen protector off eBay for $3.00 and have had it since. I do miss the crisp clarity of the Evo screen but it has proved useful and has worked much better than that zagg crap.
I got a Zagg as soon as I got my Evo. I had used them on other devices (G1, my brief stint with an iphone, my Moment). Some people don't like the orange peel effect, and say it feels tacky, but it doesn't bother me (I don't even notice the orange peel effect). I have had it since August of last year, since the Evo was so hard to come by for the longest time lol. I have no scratches, and no bubbles. No peeling of the sides, except one when I put my Seidio case on initially, but it smoothed back out. I had Best Buy install it for me this go around, and I couldn't be happier. I have had it like I said, since August, with heavy use, and it stays in my pocket. It still looks as good as the day I got it
I was wondering if there are any go to screen proctectors? Any to avoid, like do any cause issues with the touch screen?
Sent from my Galaxy Tab!
I'd avoid the hard plastic static-type. They're difficult to put on without dust. I've been using the ones from clearprotector (.com). 50% off and free ship with the code iwantultra (have it memorized cause I've gotten several). The corners and edges are kind of a ***** to get on, but they work well and come with a lifetime warranty (or so they say...). This is a wet-application so don't use them unless you're willing to take the time to watch the youtube videos to learn how to install, and then takes about 20 minutes to install.
I get mine from www.bestskinsever.com. I've had no problems with them. The screen protector is easy to apply and very durable.
I have Ghost Armor on mine and like it, it is a bit smoother than Zagg or Bestskinsever.
Be warned if you want the full body protection, adding this to the back of my tab caused me to have the newton ring problem. I never had the problem with just the screen protector on, I should I have just stuck with the screen and not the entire thing but I really wanted the matte back on my tab.
Thanks fellas. I have and used to do/use the wet application ones for a while. Then I got tired of them and just went with the cling ones. I think I'll get the wet app and it should last a longgg time. Especially since Im not going to be using the tab every day.
I went with Clarivue on the recommendation of a friend.
It's decent enough, no tackiness or anything like that but it's not the best fitting, could've been a couple of mm wider and taller.
Other than that, whilst I've had a long-standing dislike for them, recently I've found Zagg's InvisibleShield protectors to be pretty decent - they seem to be very well fitted and the tacky feel to them that I remember doesn't seem as noticeable.
Kinda wish I'd gone with them for my Tab
Which would you guys say offers the smoothest screen experiences of all? I don't care about longevity as I only use my tab about once every 2 weeks
Imo the smoothest would be the cling on ones.
Sent from my Galaxy Tab!
I purchased these in July from Amazon. http://www.amazon.com/gp/product/B0058NXPLK
I was never a fan of the "wet" applications, to me it just seemed like too much work and I was never comfortable spraying any type of liquid all over my devices, regardless of how harmless they might be.
But anyway, this is a clear, non-matte protector that is the "static cling" kind of application. Once it goes on properly, you cannot see that is even there. The touch feeling is the same as if you had no protector on. I really feel that those matte ones, while they do reduce sun-glare, a lot of them provide a "tacky" feeling that maybe is fine for a smaller screen such as a phone, but can become very annoying for a larger screen if you do a lot of swiping across the larger surface area of a tablet. But that is a personal thing....I usually don't use my tablet outside in the bright sun anyway, so the matte types are useless for me.
I've had it on since the end of July and it's held up very well. You do have to wipe the smudges off the screen occasionally, but you'd have to do that anyway even with no protector. I'm extremely satisfied with these.
So I've got an Invisible Shield en route for my Tab, will post back when it arrives.
Same here haha.
Sent from my Galaxy Tab!
I just bought the glare-reduction screen protector from BodyGuardz. Has anyone else had any experience with them? I wanted something that would offer a decent amount of protection for the screen (fingerprint and physical pressure), but also not reduce the touch sensitivity at all. (I type with the tip of my nose since I can't use my fingers, and trying to press too hard hurts )
Not sure where you can get it, but here in Singapore there's a brand called DataFlex and their screen protectors seem really good.
I bought SGP steinheil shield ultra optics. I liked it.
Raistlin1 said:
I have Ghost Armor on mine and like it, it is a bit smoother than Zagg or Bestskinsever.
Be warned if you want the full body protection, adding this to the back of my tab caused me to have the newton ring problem. I never had the problem with just the screen protector on, I should I have just stuck with the screen and not the entire thing but I really wanted the matte back on my tab.
Click to expand...
Click to collapse
So this newton ring issue is a major problem. What if I just protect the back and leave the screen open? I have the new logitech keyboard case on the way and the front is protected in the case, but the back is exposed. I planned on protecting the back only. But I wont do anything if it'll case the newton rings.
Newton Ring?
nuprotocol said:
So this newton ring issue is a major problem. What if I just protect the back and leave the screen open? I have the new logitech keyboard case on the way and the front is protected in the case, but the back is exposed. I planned on protecting the back only. But I wont do anything if it'll case the newton rings.
Click to expand...
Click to collapse
Yeah. Same here. Just want a more "grippy" back. How does one produce Newton Rings from the back of the device. Methunked it was a display issue resulting from the interaction of the protector and display glass...kinda by definition...
Hopefully we'll find out soon. I just want to protect the back.
skeeter123 said:
Yeah. Same here. Just want a more "grippy" back. How does one produce Newton Rings from the back of the device. Methunked it was a display issue resulting from the interaction of the protector and display glass...kinda by definition...
Click to expand...
Click to collapse
I blame the install of the rear skin because I had the screen skin installed first and then three weeks later I had the rear done. He turned the tab face down and installed the skin. When he turned it over, bam, Netwon Rings...
I never had them before the front screen protector, during the front screen protector install or after the front protector was on the Tab.
Will it happen to you? I have no idea but from what I have read about the problem it is caused because of the Tab moving/flexing which can be caused by excessive heat and certain handling of the Tab.
thanks!
Raistlin1 said:
I blame the install of the rear skin because I had the screen skin installed first and then three weeks later I had the rear done. He turned the tab face down and installed the skin. When he turned it over, bam, Netwon Rings...
I never had them before the front screen protector, during the front screen protector install or after the front protector was on the Tab.
Will it happen to you? I have no idea but from what I have read about the problem it is caused because of the Tab moving/flexing which can be caused by excessive heat and certain handling of the Tab.
Click to expand...
Click to collapse
Thanks for taking the time to explain the details. Sounds like a warranty kinda thing mebbe. Hope it gets resolved! Mine is on order and I'll watch out for this issue.
Cheers!
slack04 said:
I'd avoid the hard plastic static-type.
Click to expand...
Click to collapse
I bought an anti-glare protector from Cellularbuy on eBay and managed to get it on in one go with no dust at all. The protector fits perfectly and the camera and light sensor holes line up spot on. The anti-glare makes the screen look a little grainy, but I hear that even the Steinhell ones that are many times more expensive have the same problem.
This has been gone over millions of times on each forum here, but here's how I did it:
-Wipe the screen down with a soft cloth and glasses cleaner or isopropyl to get any grease off
-Run the shower in a small bathroom on hot until the room is unbearably steamy
-Put on a hat to keep your hair and head funk from falling on the screen
-Line the protector up on the screen before removing the film and tape it on one side with a few pieces of Scotch tape
-Also make a "handle" out of tape to put on the top of the protector opposite the taped-down end. This will help with alignment
-Go into the bathroom and clean the screen with a good microfiber cloth. Also clean the front and back protective sheets on the film so there's no dust to come off when you start peeling them. The steam should be enough to wet it. Take one final look
-Peel the protector back and lay it down pulling the taped edge taut to keep it lined up
-Smooth any bubbles out with a credit card BEFORE peeling the top sheet off
IF you do have any dust, use a piece of tape on a corner to lift up the protector and another piece of tape to pick up the dust. If the room is steamy enough and you did a good job of wiping the screen this shouldn't happen.
I got my GNex the day of release and since day one I have had a screen protector on it.
I used the cheap Verizon ones temporarily, and purchased an invisible shield about a week later.
I really like the invisible shield, its lasted me this whole time. From December to April with no issues. It was clean looking. It did have a little bit of the "orange peel" effect, but I didn't mind it.
But its starting to get a little bit worn, dirt starting collecting around the edges of the screen protector, and won't come out. Its also got little fine surface scratches from me cleaning the screen......
So my question is, who here is using their GNex Naked?
Im thinking about taking my invisible shield off now,
But im just worried that the glossy black front of the phone will start to get little fine surface scratches from pocketing/cleaning.
I know that the screens are not suppose to scratch easily, but its the little fine hair like scratches that appear over time from use / cleaning that bother me to no end.
Anyone using their GNex Naked care to chime in on how well the screen is holding up? How about the glossy black above and underneath the screen?
hxdrummerxc said:
I got my GNex the day of release and since day one I have had a screen protector on it.
I used the cheap Verizon ones temporarily, and purchased an invisible shield about a week later.
I really like the invisible shield, its lasted me this whole time. From December to April with no issues. It was clean looking. It did have a little bit of the "orange peel" effect, but I didn't mind it.
But its starting to get a little bit worn, dirt starting collecting around the edges of the screen protector, and won't come out. Its also got little fine surface scratches from me cleaning the screen......
So my question is, who here is using their GNex Naked?
Im thinking about taking my invisible shield off now,
But im just worried that the glossy black front of the phone will start to get little fine surface scratches from pocketing/cleaning.
I know that the screens are not suppose to scratch easily, but its the little fine hair like scratches that appear over time from use / cleaning that bother me to no end.
Anyone using their GNex Naked care to chime in on how well the screen is holding up? How about the glossy black above and underneath the screen?
Click to expand...
Click to collapse
Nothing on my nexus just yet... I tried scratchingit with a key( don't do that) and not a single scratch.. I had a screen protector aswell but it seems to make blacks not so black..
Sent from my Gnex
Honestly, wouldn't risk it.
When you have that tiny grain of sand or something in your pocket and your phone is with it. That is just enough to scratch it and just make you OCD and annoyed with the screen because of that one scratch you always see.
Just put on a quality screen protector. I put an XO skins on mine and it's been good so far.
I used it from half of January until now. Collected my fist scratch a week ago, even though I treat it with extreme care. It is not very visible but still. I would recommend one.
Sent from my Galaxy Nexus using xda premium
I would use a screen protector just to not take the risk of the screen getting scratched. Because if those tiny little scratches bother you, imagine what'll happen when you get a big scratch on your screen. You'll regret it. I, and many others here would recommend XO Skin's. It's a really good screen protector and I'd say give it a chance.
Sent from my Galaxy Nexus using xda premium
I've never put my phone into trouser pockets. It always goes into a suit jacket pocket on its own - without any other items in the pocket. Despite this, I have a curved scratch on the screen that becomes noticeable in bright environments.
So, if a scratch will bother you greatly, you'll definitely want a screen protector.
I put protectors on all my phone's screens before use them. On my old iphone 3gs one from power support saved my glass from a 1.5 meters fall, protector broken but screen untouched.
Ran mine about a week without one until my case and protector came in...was extremely careful and no scratches thankfully.
It's like having a home alarm system. No one gets them until their house has already been broken into. For how cheap they are...it's cheap insurance since it's much harder to repair a scratch than replace a screen protector.
if small scratches that can only be seen when the screen is off and clean bothers you then use a screen protector. The galaxy nexus's Oleophobic coating will get these tiny scratches without one. the screen feels much nicer without one, try it for a day when you plan to switch up the screen protectors and you will see what you are missing out on.
I peel mine off. Was too slippery, got easily scratched with microscratches, looked greasy. Bleh. The screen is great and durable, has that nice oleophobic coating; the glass is strong enough, a protector isn't needed anymore on phones for regular, they're not plastic screens.
Now if you work in construction or other particle heaven environment, by all means get a protector.
Mines naked and I have zero scratches from slipping it in and out of my pocket! And trust me...I clean the screen and look under a light to check! Lol
Sent from my Nexus Prime
Picked up 10 good protectors from ebay for like 5 quid.
Get greasy, wipe on your trousers, get scratched, put a new one on.
Cheaper than new glass, simple
Sent from my Galaxy Nexus using xda premium
dexterslab said:
Picked up 10 good protectors from ebay for like 5 quid.
Get greasy, wipe on your trousers, get scratched, put a new one on.
Cheaper than new glass, simple
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Link?
I'm actually looking for a very basic, as-clear-as-possible, and non-water base screen protector. I hear the basic ones from Verizon do just fine (not anti-glare ones)? I may go with those.
What exactly are you protecting the screen from? From looking bad? If isn't for resale value, then what on Earth justifies tainting the display of a phone's screen with a piece of plastic that worsens the clarity and collects dust, fingerprints and oil?
I'd spend the money on addressing the OCD. Just get the first scratch out of the way and be done with it. It's pretty liberating to not walk around as if you are babysitting fine china in your pocket.
I highly recommend Steinhall Oleophobic screen protectors.
With a good install, it is hard to even tell its in there. Very clear, and the feel of it is better than any others I've used. Almost as good as glass.
Sent from my SPH-D710 using xda premium
Until 2 days ago I had this on since I got my GNex back in December...
http://www.amazon.com/Rearth-Ultima...CK/ref=sr_1_12?ie=UTF8&qid=1333684536&sr=8-12
Completely clear, couldn't notice there was one on, some rainbow effect not much, Covered pretty much the whole screen. The only slight issue was that the bottom right corner did not adhere so it was off about 1mm. .
Currently I have the XO on there still waiting for 2 bubbles to dry out, almost no orange peel, but I can tell it has effected the visibility a bit. Overall pretty happy.
http://xoskins.com/cell-phone-skin-...tector?zenid=2d2895b48f6f59ef6241b525b3c20c2a
Promo code SPRINTXO for 30% off still works as of a few days ago.
Also heard good things about these...
http://www.amazon.com/BoxWave-Clear...QS/ref=sr_1_10?ie=UTF8&qid=1333684536&sr=8-10
http://www.amazon.com/ArmorSuit-Mil...GBE0/ref=sr_1_6?ie=UTF8&qid=1333684536&sr=8-6
http://www.spigen.com/cell-phone/google/galaxy-nexus.html
no screen protector here and i've been using this phone for 2 months without a scratch. It's always all by himself in my left pocket and I dont feel worried about getting a scratch.
If you want a screen protector and you'd feel better with one I suggest you the Tru brand, the feeling is really nice compared to the other brands out there that I see at my workplace...
I'm the complete opposite of you. I purchased my nexus the week it came out and refused to put a screen protector on up until 2weeks ago. Was talked into trying one by a coworker. In those 3.5 months I've never had a single scratch. I'm a little OCD about having a perfect screen. Free of scratches and clean of fingerprints and dirt. I ended up throwing on a cheap verizon one thinking I'd be pulling it off very shortly after applying it. After putting it on damn near perfect, I started to like it. Color distortion was farely minimal and I wasn't wiping fingerprints every 20 minutes. That in itself is worth the screen protector. The protection to me is the added bonus..... I really hate fingerprints. Lol
Sent from GNexus w/CM-9 & franco.kernel
I am using XO Skins as well. http://xoskins.com It doesn't have orange peel and is super strong. I have had it on since day 1.
no screen protector and use this for good measures
http://forum.xda-developers.com/showthread.php?t=1488683
Hey all. Quick question here. I bought an S9+ without any contracts or anythign cash. I was due for an upgrade so I figured I would splurge. When I bought the phone I picked up an otterbox and a glass screen cover. I spent good money on the glass and I literally applied it right after I unboxed the phone, gave the screen a quick spray with the included solution and cleaned it up to perfection. The glass itself was annoying due to the loss in sensitivity. I set up the higher sensitivity in the phone, but I still had sensitivity issues when I noticed the glass protector was separating from the screen. Very annoying and one day I just yanked it off due to constant typing errors from inputs not registering. So I went online to Amazon and I picked up a Spigen wallet case so I could protect my screen in my pocket while not bothering with annoying screen protectors.
After a few short weeks, I noticed my phone had scuffs from the stitching on the case. I cant believe how fragile this screen is considering it was just a soft material scuffing it up so bad.
Anyhow, it's not a MAJOR issue because I do not notice them when the screen is on, but it certainly looks shady and will affect resale if I want to sell my phone. Any thoughts on buffing out the very small micro scratches?! Im nervous to take a magic eraser to the screen, but I have some at home and am tempted to test that out. Im almost curious if Samsung would warrant that, but I highly doubt it since it was an aftermarket case.
Looking for opinions. I am attaching a link to my Amazon review where I took a picture to show. Im not sure how to attach in here due to lack of file storage. Thanks for any advice.
https://www.amazon.ca/gp/customer-r...ef=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B0789R1F6N
I have carried my phones in my pocket for years and never had a scratched glass. I don't put anything like keys in the same pocket but that's why I wear jeans, shorts, and slacks with 2 pockets. ?
Tel864 said:
I have carried my phones in my pocket for years and never had a scratched glass. I don't put anything like keys in the same pocket but that's why I wear jeans, shorts, and slacks with 2 pockets. ?
Click to expand...
Click to collapse
So many people say they do this And never get scratches, yet every phone I've had had ended up with micro scratches. I'm the same add you and never place my phone in a pocket with anything else...
riso123 said:
So many people say they do this And never get scratches, yet every phone I've had had ended up with micro scratches. I'm the same add you and never place my phone in a pocket with anything else...
Click to expand...
Click to collapse
Never had any scratches on any of mine either, but might depend where in the world you are, certain types of dust/sand that have a high Mohs scale value could scratch gorilla glass, possible your region has those where ours don't, or at least not commonly
First few days I get a new phone I carefully clean it with a proper screen cloth, a week later I'm wiping it on pretty much anything soft I am close to
gemini8026 said:
Hey all. Quick question here. I bought an S9+ without any contracts or anythign cash. I was due for an upgrade so I figured I would splurge. When I bought the phone I picked up an otterbox and a glass screen cover. I spent good money on the glass and I literally applied it right after I unboxed the phone, gave the screen a quick spray with the included solution and cleaned it up to perfection. The glass itself was annoying due to the loss in sensitivity. I set up the higher sensitivity in the phone, but I still had sensitivity issues when I noticed the glass protector was separating from the screen. Very annoying and one day I just yanked it off due to constant typing errors from inputs not registering. So I went online to Amazon and I picked up a Spigen wallet case so I could protect my screen in my pocket while not bothering with annoying screen protectors.
After a few short weeks, I noticed my phone had scuffs from the stitching on the case. I cant believe how fragile this screen is considering it was just a soft material scuffing it up so bad.
Anyhow, it's not a MAJOR issue because I do not notice them when the screen is on, but it certainly looks shady and will affect resale if I want to sell my phone. Any thoughts on buffing out the very small micro scratches?! Im nervous to take a magic eraser to the screen, but I have some at home and am tempted to test that out. Im almost curious if Samsung would warrant that, but I highly doubt it since it was an aftermarket case.
Looking for opinions. I am attaching a link to my Amazon review where I took a picture to show. Im not sure how to attach in here due to lack of file storage. Thanks for any advice.
https://www.amazon.ca/gp/customer-r...ef=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B0789R1F6N
Click to expand...
Click to collapse
Caring your phone in your pocket is not safe if you are in dusty environment. One speck of sand dust can scratch your screen. The case probably picked up some particles. The stitching can not scratch the glass, neither can keys, coins, knives etc. Only things that are harder than glass like quartz. Even a speck of quartz dust can scratch your screen. You have to keep dust, dirt, and sand away from your screen or it will get scratched.