HI enyone... I Hawe a problem with my MDA Pro... I want to update it from GER to english with UNI TMUK 11242 126 10002 Ship.exe, but it says ERROR 120: COUNTRY ID ERROR 34.34.38.38.38 How can i made it myself..... :?:
ps sory if some thing is wrong my english is bed
Please search the forums as this has been discussed many times.
Anyway, here it is:
Download this file from the XDA FTP : MaUpgradeUtnoID
Extract the files of the ROM that you have to a folder, then copy the above file to the same directory then run the noID file TWICE
Twice because normally the 1st time will give a country ID error, then run it right after again, this should work
thank you. i will try it now...
IT'S A LIVE ///// IT'S WORKING ///// thank you, for all
PS Who Can sey me, how I can change qwerty to qwertz in english firmware///// thank's
4. for the german keyboard on english ROM
4a. get a registry editor (like Resco)
4b. search the Change the key
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
4c. edit - Layout in decimal to 66567
5. softreset
6. enjoy
RILuse, you were told once,
SEARCH THE FORUM before asking to make sure your question has not been answered before...
Related
I have Qtek 9090 with german windows, and i need to change it to english
ROM 1.22.01 GER
RADIO 1.06.00
EXT ROM 1.22.134 GER
I need everything, from drivers for win 98 (i can't find it anywhere), to ROM files and instruction how to not kill PDA
all you need is in the link of my signature
Thank you.
i can't download anything from there. - "File not found"
mendoza said:
i can't download anything from there. - "File not found"
Click to expand...
Click to collapse
nevermind, something wrong with my internet settings
I've just tried to update PDA using MaUprtadeUtnoID.exe, got error "no connection with device", and now Qtek just shows "serial" on top of the screen and "V2.06" on bottom of the screen, and when i connect USB cable, it shows "USB". thats all, no reaction to power on, no reaction to reset... Whats wrong? Is this the end?
sorry, false alarm
So much qestions, when doing something for the firs time...
mendoza, does this mean the upgrade worked?
I wasn't fully sure that the MaUpdradeUt_noID.exe method worked when I wrote that guide.
Yep, no problems. I've used it because normal update said: "This update is not for the model that you are trying to update... bla bla bla"
mendoza said:
I have Qtek 9090 with german windows, and i need to change it to english
ROM 1.22.01 GER
RADIO 1.06.00
EXT ROM 1.22.134 GER
I need everything, from drivers for win 98 (i can't find it anywhere), to ROM files and instruction how to not kill PDA
Click to expand...
Click to collapse
did you able to change the language buddy? how? i got same problem now, could you help me please.. id like to change my qtek9090 language from german to english.
many thanks... vic
philippines
vic pag-ong said:
did you able to change the language buddy? how? i got same problem now, could you help me please.. id like to change my qtek9090 language from german to english.
many thanks... vic
philippines
Click to expand...
Click to collapse
steps to change the language
You need a registry editor.
Say we want to add "T9englishLdb.dll"
- copy "T9englishLdb.dll" to \Windows
- go to [HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages]
- it should be:
"Available"="0407"
- change it to:
"Available"="0407, 0409"
(if you want that T9 english to appers first, put 0409 first in that list.)
- go to: [HKEY_LOCAL_MACHINE\T9 Input Method\LDBs]
- add new string value "0409"="T9UenglishLdb.dll"
- reboot
vic pag-ong said:
did you able to change the language buddy? how? i got same problem now, could you help me please.. id like to change my qtek9090 language from german to english.
many thanks... vic
philippines
Click to expand...
Click to collapse
see here http://forum.xda-developers.com/showthread.php?t=758462
Hi all,
I just bought the qtek 9000 but os is in french, i have the os in english but when i want to do this it says wrong rom. Could someone please guide me threw this problem.
Also if i'm able in the future to get it upgraded in english wont i have a problem with the azerty keyboard, cause english os is with qwerty keyboard no?????
Please advice
Daffy
Hello,
First, extact your new english rom, than repace files in new rom with files in my package. Put universal in bootloader mode, run MaUpgradeUt_noID.exe wait... 30-40 minute and enjoy new rom
Thx for the reply but this is chinees for me. I am completly new at this. What do you mean with extract new boot and afer that replacing files with yours??? Extract from where and how?? also upgrade tool is showing picture from S100 and mine is 9000?? then how do you put your phone in bootloader mode??? and what about keyboard problem???? ( azerty/qwerty )
this is what i get as error :
I know that You have country id problem, I will try to explain how to.
1 If you have upgrade file as XXXX.exe you will have to extract that file using win rar (just right klik on it and extract to your folder.
2. Unpack file from my package WM2005reinstall.rar
3. Replace file in the original unpacked rom with files from WM2005reinstall.rar (RUU.dll , Getdevicedata.exe ...
4. Run MaUpgradeUt_noID.exe That file has no country specyfied so You can install Your rom (English). It is working in all MDA so don't worry about different picture.
Hope it wiil be clear if not - write ...
Ok got that. Finally but before i try this upgrade, what about keyboard. Will it be different?? (azerty/ Qwerty, do you know this...
Thank you verry verry much
If it is WWE rom (World Wide English) it will be qwerty
If other like German - qwertz
thats a problem then cause mine is azerty any sollution for this?
And again many thx for your help
thats a problem then cause mine is azerty any sollution for this?
And again many thx for your help
daffy duckati said:
thats a problem then cause mine is azerty any sollution for this?
And again many thx for your help
Click to expand...
Click to collapse
Here's your solution:
1. Get a registry editor. Here is a free one :
http://www.pocketpcfreewares.com/en/index.php?soft=92
2. Look at the value in the following:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty
The DWORD should show what the FRENCH code is for in XXXXX format. Write this down.
3. Upgrade to the new english ROM
4. Install again the RegEditor
5. GO to same local key and the key will be 66589. Change this to the value of the french keyboard (value you got from step 2)
Goodluck
I have a german t-mobile device with a qwertz keyboard and loaded with english wwe version. I would like to have the right mapping so can i change the english mapping to german on the keyboard ? what is the registry key for that a what is the value for the german qwertz keyboard layout ?
Thanks for nay advice
Regards,
Try:
http://wiki.xda-developers.com/index.php?pagename=Changing_Device_Language
I have the same keyboard also but don't know how to go to Reg Edit mode. Please advise.
Use TotalCommander. It is an file explorer with an good registry editor.
keyboard layout
I just upgraded my qtek 9100 to AKU 2.3 but the slide-out keyboard that I have is in Swedish. I tried to make the changes suggested at
http://wiki.xda-developers.com/index.php?pagename=Changing_Device_Language
but that didn’t work. Has anyone been successful in changing the keyboard language?
I was not able to do it also. Can someone help?
Thanks
It just needs a hard reset
I kept on trying at this and finally after changing the value to 0414 and doing a hard reset by using the stylus in the hole it worked. I went back and tried the 041d and it too worked so I guess the reset was what was needed. Also there is a Swedish keyboard fix circulating but don't use it since it will only work for Ext_ROM ver. 1.3.7.103. Hope this helps someone else!
Can you advise how I can go to the following step?
For German layout (QWERTZ):
HKCU\ControlPanel\Keybd\Locale = 0407 (REG_SZ string)
Thank you in advance.
you need a registry editor
First of all you need to download and install a utility that will allow you to access the registry. There are a number of good freeware applications that will let you do this. Unlike regular windows there is nowhere you can type regedit. I use Total Commander and it can be downloaded from
http://www.ghisler.com/pocketpc.htm
Once you have access to the registry (in total commander you click on the folder named “\\” ) click on registry -- >HKC-- > ControlPanel -- > Keybd . Once under Keybd create a key called Locle . In Total Commander this is done by double clicking on “+Add Value+” Set the name to Locale and select String. Click Ok and then when the value box pops up enter the LCID Hex number like 0407. If you need to change the number highlight the key and click properties.
Don’t forget to reset the machine by pressing the stylus into the reset hole.
Hope this helps.
Thank you very much for the elaborate procedure. I followed every step you wrote and locale = 0407 was sucessfully entered. After reset, the keyboard still did not change to German! I tried many times but the result was the same. Did I do any thing wrong? Many thanks.
HKEY_LOCAL_MACHINE\Software\OEM\Qwerty\Layout
Change from Ger Z: 66567 to 66569 (eng Y)
Good luck
I am sucessful!
Thank you very much. I got it now!! :lol:
0407
used for Wizard not Uni
Hello.
I have n520 deutch language model.
Everytime I try to update its ROM I get this message:
The language in this Flash Image update (ENGLISH) differs from that on your device (DEUTSCH)!
You have to use no ID installer
I have MaUpgradeUt_noID installer. But when i try to open it says: UpdateRadio could not be located in the dynamic link lybrary RUU.dll
I put this file into WM6_18125 folder, there are all files including ruu.dll
men.. wtf? why do you use RUU from other devices? i told you many times, open os_122u.nbf with winhex and replace ENG in the beginning once with
FRA
GER
ESN
Ok, that works. Thank you.
Works for me too
Thanks sp3dev,
I had hungarian one.
I cold reset it and becomes german. Then modify it as you said and worked.
Just I had an error in winhex when I want to save. But I used XVI32 (free) and worked.
Hello,
i install the shadow 2.1 CE Clean version ENG but everything works fine
but the problem is i can`t writing in my qwertz keyboard german
Have you people a idea how can write in german
it is possible to add german keyboard files in wm6.1 ?
Whats folder and File Please help me?
Thanks
Peace to the people
i have a mda vario 2
If you're talking about hardware keyboard, look at the Hermes Wiki or install Advanced Configuration Tool by Schaps.
Is this corectly i must only change the registry to use German Hardware Keyboard nomore files needed
Great Thanks
Restore local language support for sliding keyboard after upgrade to a different language ROM
This has been reported not to work, see below for another hack
You need to create Registry value of name "Locale" and type of "String" and data of "Localization ID" within
[HKEY_CURRENT_USER\ControlPanel\Keybd]
Localization IDs:
German = 0407
superman13 said:
Is this corectly i must only change the registry to use German Hardware Keyboard nomore files needed
Great Thanks
Restore local language support for sliding keyboard after upgrade to a different language ROM
This has been reported not to work, see below for another hack
You need to create Registry value of name "Locale" and type of "String" and data of "Localization ID" within
[HKEY_CURRENT_USER\ControlPanel\Keybd]
Localization IDs:
German = 0407
Click to expand...
Click to collapse
no. you have to read carefully the wiki. you will see there that you have to create it in
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
the name of the key is Layout
the value (hex) of the key is 20407
do a soft reset via switching the device off (long button press of the on/off button) as it keeps your changes. otherwise you will loose your changes.
Thanks that works fine
this CAB does the registry entry for a german keyboard and installs the file (\windows\sym.0409.txt) for the german umlauts (that you get ä first and not á when you switch via dot + space)
Vielen Dank
Hello,
i've installed the rom HTC HERMES_CE OS 5.2.19949 Build 19949.1.2.0. and your tool doesn't work with this rom. Do you know what I can do to have the german Umlaute (äöü)?
Thanks a lot.
Greetz.
edit the file \windows\sym.0409.txt yourself. it is very easy.
have a look into it and you will see what i mean.
colt-ca0 said:
Hello,
i've installed the rom HTC HERMES_CE OS 5.2.19949 Build 19949.1.2.0. and your tool doesn't work with this rom. Do you know what I can do to have the german Umlaute (äöü)?
Thanks a lot.
Greetz.
Click to expand...
Click to collapse
Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]There is a key called 'Layout' and it is in Decimal.
The suitable value for German Hermes keyboard is 20407 (132103 in decimal). =qwertz
Thanks for the posts. I installed the rom, then I installed the tool of stan23. I looked into the registry and the value is 20407. When I want to use the hardware keyboard I can't write a "ä, ö, ü" not even an "á". I can't understand it.
check the following:
- is the file sym.0409.txt still there (maybe you have deleted it?) and have a look into it.
- is the value of the reg.key 20407 HEX
- when typing: make sure you press "a" then "dot-key" then "space-bar".
if this does not work, hard-reset.
if this does not work, try a different rom