Related
I was trying to upgrade the radio on Universal, somthing I did all the time on my magician. And I think the upgrade worked, I'm not sure. BUt now it won't get out of boot loader mode. If I hard resest and choe clear it says "clearing now" then just goes back to loader mode. I've tried every key combo I know. Power + reset, backlight + power + reset, pulling the battery. Nothing works! Anyone had this issue before? Any suggestions? :?: :?: :?: :?: :?: :?: :!:
That happend to me too. I tryed every thing ... not working ... then i upgrade to the last radio and (soft-reset and power botton) and it worked ... i havent make any upgrade after :lol:
Hi,
the same happened to me, but I solved the problem:
1.) Make the update without any card (SD + SIM) in the phone!
2.) Use the original USB-cable
Now it should work!
Greetings,
Teja
Thanks guys. Pulling out the SIM and the SD did work. I wonder why though? ANyway, thanks again.
A million thanks!!!
I read a lot of replies on other threads, and nothing worked.
Then your suggestion of the Sim + SD worked like a charm.
Thanks a bunch for restoring my expensive brick.
It took a long time for me to find out you've to remove the cards so I was about 2 weeks without my expensive MDA-Pro. And I'm looking forward if it helps anyone to solve the same problem!
Greetings,
Teja
As you've seen, it was my first post here...
Stuck at USB V1.01
New to this. I have a QTEK 9000 Spanish edition. Was upgrading the ROM and the PC for some reason restarted cutting the connection while ROM was in progress. now the PDA is stuck in USB V1.01 screen, tried to hard reset. nothing working. I have read posts about removing SIM and SD cards I have done this. I can not even connect back to the PC, I use the original USB cable, windows pings to suggest a connection is made BUT, now light shows uup on PDA to suggest a connection and Windows mobikle Device Center is not picking up the device. can anyone help me?
Hi, the same problem with me. So at last I am successful and I solve it. I suggest you. First you make update with out any card and then the second step you use the original USB cable.
Try the best.
Bootloader screen stuck!
I dun know i removed cards and hard reset but still its not connecting... show usb when connected to pc and Serial of not down at the bottom show v1.01
Any idea what should i do now?
Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks
That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.
Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414
i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?
The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.
hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot
Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz
hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot
Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.
connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
are there any useful hints extrem69 ?
no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?
siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.
wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................
Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.
Hi,
I was upgrading my XDA Exec using Xda_Exec_Upgrade_v1.30.162.exe
My laptop died. It sometimes overheats but it hadn't happened in a while.
I now can't progress past the bootloader even after full clean reset.
Anyway. I have the O2 screen reading:
R 1.04.01
G 42.37.P8
D 1.13.82 WWE
My laptop detects a USB connection, although it says "USB Device Not Recognised". Activesync 4.1 won't detect it, however, I've tried changing settings etc but to no avail.
I've trawled the board here and found people recovering from similar situations with other devices. Am I gonna be able to restore my beloved exec from paperweight-status?
btw: am in Ireland where O2 don't support the exec and bought it from a guy in the UK who got it as an unwanted upgrade. have flashed it before just fine...but don't think I'll be able to return it to O2 as UK and IRL are not the same company...
Help?
Mark
p.s. ran BL10_RUU_UNI_V11.exe and got 101 connection error :-(
EDIT:
Fixed, using bootloader mode and re-running the upgrade. thanks
xda neo crash
You need to reinstall your windows mobile 5 system. If you are using orginal german neo rom, you can download rom from o2 web site, or you can download from this sites ftp server
thanks for the feedback,
I found the info on restarting in bootloader mode (i had previously misunderstood "bootloader") and was able to re-flash it by USB no probs.
I now have a happy XDA
Hello there ...I have about the same problem with my MDA Vario....could you explain how do I "restart in bootloader mode"?
My PPC just stucks before loading windows...
thanks
How to get bootloader mode
Ok, did a bit of a lookaround and got this (I thinkg the MDA Vario is the XDA Mini)
For Xda II and Xda IIi
- Press & hold the power button
- Press & hold the D pad (5 way directional button)
- Push the stylus into the soft reset hole - until you see the word 'Serial' on the screen.
You should now be able to follow the upgrade process above for a device stuck in Bootloader mode.
For Xda IIs
- Press & hold the power button
- Press & hold the Camera button
- Push the stylus into the soft reset hole - until you see the word 'Serial' on the screen.
You should now be able to follow the upgrade process above for a device stuck in Bootloader mode.
For Xda Exec
- Press & hold the power button
- Press & hold the Backlight button
- Push the stylus into the soft reset hole - until you see the word 'Serial' on the screen.
You should now be able to follow the upgrade process above for a device stuck in Bootloader mode.
For Xda Mini S
- Press & hold the voice command button
- Push the stylus into the soft reset hole (short quick press). Keep hold of the voice command button until you see the screen with multicolored horizontal stripes). The device is now in Bootloader mode and you can follow the upgrade process above for a device stuck in Bootloader mode.
EDIT:
The rest of the process (just in case you need to know) is as follows:
(and if you have problems open your connection settings in activesync and ensure that USB is unchecked...that is OFF. remember to reset the USB settings once you've successfully upgraded)
in 'Bootloader' mode
When this happens the device screen will be blank except for the words;
Serial
v 1.00a
The word 'Serial' should change to 'USB' when the cradle is plugged into the PC, and the version number below this will vary. When you get this screen, a soft or hard reset will not make any difference.
It is still possible to run the ROM upgrade file again, WITHOUT using Activesync (activesync will not restart anyway).
Firstly unplug the USB cradle and reboot the PC
Plug the cradle back into the USB port (this must plug directly into the USB port and not into a USB Hub/adaptor).
Now run the ROM upgrade file again from the PC. This should just run as per normal and correctly reflash the device.
Thanks bob_jesus!!
I am already in bootloader mode....Could you tell me where I can find the files to flash it? My device is Tmobile MDA Vario. Are there different files for flashing for every device? (O2 XDA mini s, MDA Vario, imate kjam...)??
Thanks again
Hi Ermoscow,
I'm sure if you trawl around the boards a bit you'll find it. I'm pretty new to this but yes, all these devices tend to have a different Rom, and each device itself tends to have a different Rom based on your mobile carrier.
e.g. I use an XDA exec which is the same as an HTC universal, they could theoretically use the same Rom but not the same rom as an XDA mini.
Again, this is all in my understanding and keeping it simple.
another idea would be to check the t-mobile site and download your rom directly from them, it should be available. if i find anything for you i'll post back.
Thank you everybody!
After managing to get to the bootloader mode I made a rom update which solved the problem!
Now it works great again!
thanks
Botloader Mode
I have a bricked MDA as I had a power outage while flashing the ROM. Can someone tell me how to recover. I find references to folks entering bootloader mode and then recovering, but I cannot find a post that tells me how to do it. Can anyone help? [email protected]
I'm desperate!
Regards,
Bob
Hi, which MDA is it because the instructions should be included in my post up above. You just need to find which XDA your device corresponds to and go from there. All that info's in this forum somewhere for sure.
Best of luck!
XDA Exec Dead after interrupted Rom Upgrade
XDA Exec Dead after interrupted Rom Upgrade
Hi
I was installing new ROM WM6.1 on autom exec when it rebooted it was showing black screen and just vibrating. as when I hard rebooted it after removing my phone battery and again press the power button it was again showing the black screen and vibrator continues it is not bootng up.
can any one help me please.
How can I reinstall the the old rom using usb
help required....
Please help....
It´s always good to READ the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Keys dont work
Hey i just put WM6.1 on my xda exec and it works fine apart from the keys not working so i have to type using the touch screen and the WI-FI randomly turns off and on i was wondering if anyone else had these problems and if they could help.
Thanks
Hello Everyone. I Am Trying To Istall The Official Wm06 But The Bootloader Does Not Respond. Any Sagestions Pls
U give us very little info to respond to
what pc system r u using? What version activesync, what exactly happens (or doesnt), which rom/language, did u cid unlock it (used uspl), etc.
Be more specific please.
Twiggerdingo said:
U give us very little info to respond to
what pc system r u using? What version activesync, what exactly happens (or doesnt), which rom/language, did u cid unlock it (used uspl), etc.
Be more specific please.
Click to expand...
Click to collapse
hello again.thanks for the responce. my p3300 has the official wm5. i load the
wm06 (not official) one of the programs that i use in my job dosn't work propertly. so i have to restore in previus wm5. i download fro the site of htc the official wm6. in htc they told me that it is very easy so i could do it my self. i had only to conect the usb cable to the pc (windows xp) and run the file (wm6) i did it but when it start to install the wm6 the activesyng (ver 4.5.0) shut off and stoped the instalation. the screen turn to black. after that the p3300 started again but when i push the voice key and the power key to get in to the bootloader it doesnt work the screen becams to a multi color pixel.the htc told me that i have to replace all the inside hardware. thats all thanks a lot .
robinbatman said:
hello again.thanks for the responce. my p3300 has the official wm5. i load the
wm06 (not official) one of the programs that i use in my job dosn't work propertly. so i have to restore in previus wm5. i download fro the site of htc the official wm6. in htc they told me that it is very easy so i could do it my self. i had only to conect the usb cable to the pc (windows xp) and run the file (wm6) i did it but when it start to install the wm6 the activesyng (ver 4.5.0) shut off and stoped the instalation. the screen turn to black. after that the p3300 started again but when i push the voice key and the power key to get in to the bootloader it doesnt work the screen becams to a multi color pixel.the htc told me that i have to replace all the inside hardware. thats all thanks a lot .
Click to expand...
Click to collapse
Ok, let me see if i understand u correctly, your specs give me no new questions they look ok. U have WM5 and want to run a program (from your work) which needs WM6 (wont run on WM5). HTC told you about the official WM6 update. This wont flash as activesync crashes, right?
With an official Rom you will not need to unlock the CID/SPL with USPL. But this goes only when you stick to your current language. i.e. a german WM5 is not allowed to be flashed into english. To do this you will need to USPL-unlock it 1st.
If the language is the same, it should work. Best is to do a hard reset 1st (2 soft buttons and soft reset, wait and press green/send.) Afterwards hook it on the PC (activesync want to start a newe partnership, click cancel, so u will be connected as guest).
Start the rom upgrade. Activesync should close and bootloader on the ppc will be started. This is a screen with many colours/stripes, which is normal but looks very bad and different from normal bootup.
Then the flashing will start, the screen on the ppc will turn white/grey and a scale will show you the percentage of the flashingprocess (similar to the screen of the pc). Wait patentiently and do not toch the ppc or disconnect (or expect a bricked device).
At the end, the ppc will reboot and take a while (longer then normal bootup) to initiate the boot for the 1st time.
If this wont work, then try to extract the upload file, put the ppc in boatloader mode, connect to pc and start the romupdateutility.exe directly.
Good Luck!
hi,
i've flashed my HTC P3300 and it was done successfully (using USPL) but the language was Spanish, i searched a lot how to change it to english since i dont understand a word of it.
through one of the forums, i was told to set the SysLang = 1032 in registry to get the english language, i done so, now, the phone is stuck in Welcome (WM6.1) screen and nothing is happening, not even responding to power key.
I tried hard reset, it doesn't work, i tried entering to bootloader, it also doesn't work, also, i am not able to connect it to PC since i guess its not completed up.
Just got stuck with a brick, can you help please. Really needed!!!!!!
Thanks
Maybe flashing ROM from memory card may help. Search Artemis wiki for micro card ROM flashing.
Hello, I guess I'm having the same problem...tried to flash but something went wong and now I have my htc p3300 blocked with the multicolor screen. It does not work, so I don't understand how I could start flashing rom by memory card. Could you be a little bit more detailed? Thanks in advance
Does anybody know if there is a way to boot N560 using SD card? I think I killed my FS with some "rom killer" and all I get now is FS boot screen, no other activities.
Any way to start it from SD card and flash it from there?
Perhaps any other way to bring it back to life?
i have the same problem
is there anybody for help???
SOS please
Eenigmaa said:
Does anybody know if there is a way to boot N560 using SD card? I think I killed my FS with some "rom killer" and all I get now is FS boot screen, no other activities.
Any way to start it from SD card and flash it from there?
Perhaps any other way to bring it back to life?
Click to expand...
Click to collapse
You cannot burn the ROM from an SD card.
If the device has had the anti-theft password set at some stage then you cannot reburn the ROM! This might be the problem?
A hard reset on the N560 followed by running the Loox burn program on a PC with ActiveSync connection to the N560 cradle is the only answer i.e. a normal ROM burn.
fingerstoo said:
You cannot burn the ROM from an SD card.
If the device has had the anti-theft password set at some stage then you cannot reburn the ROM! This might be the problem?
A hard reset on the N560 followed by running the Loox burn program on a PC with ActiveSync connection to the N560 cradle is the only answer i.e. a normal ROM burn.
Click to expand...
Click to collapse
Theft protection is not a problem here. It was wrong ROM and now it is stuck on boot screen, active sync does not see it at all, maybe there is a trick to somehow anable burn, flash, service mode on it? So far nothing helps....
Eenigmaa said:
Theft protection is not a problem here. It was wrong ROM and now it is stuck on boot screen, active sync does not see it at all, maybe there is a trick to somehow anable burn, flash, service mode on it? So far nothing helps....
Click to expand...
Click to collapse
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
Edit/Delete Message
vladtapes said:
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
Edit/Delete Message
Click to expand...
Click to collapse
GREAT!!!!
Thanks ever so much! You are real HELP!!!!
You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA.
Click to expand...
Click to collapse
Eenigmaa said:
GREAT!!!!
Thanks ever so much! You are real HELP!!!!
Click to expand...
Click to collapse
do you confirm the method is fully functional?
I made a backup of my german original rom, if i have problems i want to restore it...
have you got a backup of your old wm5?
thanks
Yes it is working! Even if error comes at the end, shut the appie and use FS update tool to finish it up! All perfect!
Google for WM5, it is somwhere out there!
Eenigmaa said:
Yes it is working! Even if error comes at the end, shut the appie and use FS update tool to finish it up! All perfect!
Google for WM5, it is somwhere out there!
Click to expand...
Click to collapse
could you please p.m. to me the link of wm5 other language?
If you refer 4pda...it can't be downloaded, i don't know russian, i registered, but always cannot download...
if you have other link...pls send me...
vladtapes said:
could you please p.m. to me the link of wm5 other language?
If you refer 4pda...it can't be downloaded, i don't know russian, i registered, but always cannot download...
if you have other link...pls send me...
Click to expand...
Click to collapse
You can if you use an translator like www.windowslivetranslator.com or translate.google.com
then it is pretty easy.
I've resolved...
Fully functional WM6.0 newplowe in English...
now I'm searching for editing it in Italian/French but I need to edit the rom part of the XIP (just that).
For doing that, I need to open decrypt the file .nbh file (don't really know howto, and newplow doesn't answer about that... ).
Hi everybody, I need your help. I spent 2 hours to read several posts about N560 brick recover, and I still can't figure how to do it.
I flashed the N560 with the WM 6.1 and then I tried to flash the backup Rom Image ... which failed. Now is stucked in the climbing image ... and is not reacting to nothing. I didn't try the mitty sol because I don't have a clear ideea about using it, I am still a newbie ...
Please, I am begging for help if you can , thanks
rcretu said:
Hi everybody, I need your help. I spent 2 hours to read several posts about N560 brick recover, and I still can't figure how to do it.
I flashed the N560 with the WM 6.1 and then I tried to flash the backup Rom Image ... which failed. Now is stucked in the climbing image ... and is not reacting to nothing. I didn't try the mitty sol because I don't have a clear ideea about using it, I am still a newbie ...
Please, I am begging for help if you can , thanks
Click to expand...
Click to collapse
Try this?
Take the N560 off the cradle. Remove the battery for at least 30 seconds. Reinsert battery and back cover. Do not worry if the screen shows the dolphins again. Do a full hard reset to get back to factory setting i.e Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
A hard reset should put the device back to the existing (last burned ROM) and you can try the burn again.
You probably do not know why the burn originally failed. The most common reason is some interrupt of the processor (internet access, switch of all internet access) but more likely something is polling the USB port, which might be shared in the PC. My external USB TV tuner constantly polls the USB port and interrupts any transfers on other ports! I suggest that you disconnect all other USB devices and make sure that your N560 cradle is connected to a USB port directly on the motherboard of the PC (not a USB hub or expansion card with multiple USB ports).
Hope this helps.
N560 - still stucked in the climbers bagground after WM 6.1 flash
fingerstoo said:
Try this?
Take the N560 off the cradle. Remove the battery for at least 30 seconds. Reinsert battery and back cover. Do not worry if the screen shows the dolphins again. Do a full hard reset to get back to factory setting i.e Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
A hard reset should put the device back to the existing (last burned ROM) and you can try the burn again again.
You probably do not know why the burn originally failed. The most common reason is some interrupt of the processor (internet access, switch of all internet access) but more likely something is polling the USB port, which might be shared in the PC. My external USB TV tuner constantly polls the USB port and interrupts any transfers on other ports! I suggest that you disconnect all other USB devices and make sure that your N560 cradle is connected to a USB port directly on the motherboard of the PC (not a USB hub or expansion card with multiple USB ports).
Hope this helps.
Click to expand...
Click to collapse
Hi and thanks a lot for your post ... I tried several times this procedure ... I see no change for the hard reset .. No dolphins image at all ... I would say whatever I do it doesn't affect it. No sound, no other signs ... same climbing image.... Please keep remember other solution, It should be one ... thank you again ...
rcretu said:
Hi and thanks a lot for your post ... I tried several times this procedure ... I see no change for the hard reset .. No dolphins image at all ... I would say whatever I do it doesn't affect it. No sound, no other signs ... same climbing image.... Please keep remember other solution, It should be one ... thank you again ...
Click to expand...
Click to collapse
THANKS FOR HELP, I didn't made correctly the the procedure ... now all it's Fine ... really appreciate your help ... saved my precious loox ...
rcretu said:
THANKS FOR HELP, I didn't made correctly the the procedure ... now all it's Fine ... really appreciate your help ... saved my precious loox ...
Click to expand...
Click to collapse
PHEW! Thank goodness. I suspect you did not do the hard reset correctly at first. But I agree about the Loox being precious! I look after mine very carefully! Glad I could help you. My pleasure....
My fs560 is brikked!!!!
It remains to climbing people...
I can enter to bootloader (dolphins) but i cannot update to Windows mobile 6.1 Classic ver. 063.07
I need your HELP!!
I tried to use mtty and i can arrive to:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0236002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
but then I cannot initialize normal update, it remains to dolphins with the blue bar fullfilled by precedent mtty...
the PocketLOOXN560FlashTool.exe can't find the device...
Can someone explain me the CORRECT method after mtty?
PLEASEE!!!
vladtapes said:
My fs560 is brikked!!!!
It remains to climbing people...
I can enter to bootloader (dolphins) but i cannot update to Windows mobile 6.1 Classic ver. 063.07
I need your HELP!!
I tried to use mtty and i can arrive to:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0236002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
but then I cannot initialize normal update, it remains to dolphins with the blue bar fullfilled by precedent mtty...
the PocketLOOXN560FlashTool.exe can't find the device...
Can someone explain me the CORRECT method after mtty?
PLEASEE!!!
Click to expand...
Click to collapse
I think you have received a reply from Newplow on his guestbook....
Hi
I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP!!
if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
I've done already procedure You've mentioned here with taking of the battery for at least 30 secs with hard reset afterwards but it is still climibing screen. Can U manage this as well???
THX
The most common error with the procedure is NOT making a proper or true hard reset, or back to factory settings reset. If you do it wrong, you will only achieve a soft reset, the same as you get if you just put the stylus in the reset hole in the base of the N560.
The correct procedure is to hold Power/Resume/Suspend button (on/off button) and the Calendar button simultaneously. Keep holding them and with the other hand press in the reset hole with the stylus. The screen should blank out. KEEP holding the other two buttons all this time, and release the stylus. KEEP holding those two buttons until the screen display returns, only then release them.
This should allow another burn.
I hope this is the problem. It has happened to me and others, so I think I am right. But if this fails, you may need another approach.