Related
---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck
Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,
Thanks again , will try today
CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!
The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback
the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker
[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight
Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks
How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself
No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2
Thanks a lot again. I want the A2DP!!!! Yeah.
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.
All the nordic user wich have åä and ö in there keyboard often uses "scandivaisktastatur5.cab" (se attached file) to replace the orginal software keyboard in a WM6 ROM. Tho its very ugly and has the old WM5 design I would like to change the bmp picture in the dll:s inside the cab. How do I do that? I can extract the Cab file, and replace the bmp file in the dll:s but how do I make a Cab out of it again? I have tried to change the BMP picture inside the dll and then copy the dll file in the windows directory (where the dll files are extracted by the cab file) but that will not work. Can anybody help pleas??
Hi
I have already tried what you suggests with no luck. This is what I did:
1) Extracted the dll from the cab
2) Extracted the bmp from the dll with resource hacker
3) Edited the bmp in Photoshop (see the attachment)
4) Inserted the new bmp into the dll with resource hacker
5) Replaced the original dll in the cab with the new one
6) Installed the cab
...and it did not work. Maybe it has something to do with signing of the dll or something, I don't know. If someone wants to try another shot, feel free to us the attached keyboard skin.
Regards,
PK
You would have to sign this dll etc, and even then it may not work - if you cook your own rom it might, but have a look at the new app that came out recently to change the Wait cursor. See how that's been signed and the certificates it uses, with an mui file. A similar technique may help here.
V
paalkr said:
Hi
I have already tried what you suggests with no luck. This is what I did:
1) Extracted the dll from the cab
2) Extracted the bmp from the dll with resource hacker
3) Edited the bmp in Photoshop (see attachment)
4) Inserted the new bmp into the dll with resource hacker
5) Exchanged the original dll in the cab with the new one
6) Installed the cab
...and it did not work. Maybe it has something to do with signing of the dll or something, I don't know. If someone wants to try another shot, feel free to us the attached keyboard skin.
Regards,
PK
Click to expand...
Click to collapse
Okaj...I did the similar thing.....but i guess that you need sign it with a certificate...I hav watched a little on that maybe making your own root certficate and sign the Dll with it, but it seams to be very complicated :-(
vijay555 said:
You would have to sign this dll etc, and even then it may not work - if you cook your own rom it might, but have a look at the new app that came out recently to change the Wait cursor. See how that's been signed and the certificates it uses, with an mui file. A similar technique may help here.
V
Click to expand...
Click to collapse
Do you have a link to that??
Found this
http://forum.xda-developers.com/showthread.php?t=321236
So someone know what his doing....i must be possible to do a nordic keyboard them
vijay555 said:
You would have to sign this dll etc, and even then it may not work - if you cook your own rom it might, but have a look at the new app that came out recently to change the Wait cursor. See how that's been signed and the certificates it uses, with an mui file. A similar technique may help here.
V
Click to expand...
Click to collapse
Hi
Thanks for the info Vijay! BTW: I use many of the free tools you have developed for the XDA's! Thanks for the effort!
The wait cursor thing was done on WM5, right? Could we use the same certificates or does WM6 need others?
Regards,
PK
uffe6 said:
Found this
http://forum.xda-developers.com/showthread.php?t=321236
So someone know what his doing....i must be possible to do a nordic keyboard them
Click to expand...
Click to collapse
Hi!
I don't think the German keyboard is excactly the same thing as we try to achieve. the German one installs as an separate SIP. The SkandinaviskTastatur.cab changes the inbuilt default keyboard SIP, but there is definitely possible to learn something from the German one.
Regards,
PK
Hello all,
i have read through a lot in the forum and have alerady flashed and tweaked a lot my i780 with my readings of your Forum. (after doing the same for my TyTNII !))
Bravo to all BTW.
I have a French i780 with an AZERTY keyboard.
I have flashed with the DXHC4 PDA & Phone ROM found here. Since then I have a QWERTY keyboard when the physical keyboard is AZERTY
I have tried the registry edition in order to modify the keyboard mapping to 040C code in the 3 locations described in the different posts without success as it rendres inactive the keyboard.
I tried the different combinations etc...
Here are the exact lines :
in hkey_current_user\keyboard layout\preload string default e0010409 changed to e001040c
\\\HKLM\System\CurrentControlSet\Control\Keyboard Layout\Active to 0000040c
Is there an issue with a dll or someting in addition ?
Also, I do use RealVGA in 96dpi with an English pack as the french pack is trashing the i780
Any idea is more than welcome !
Hello the i780 specialists ?
Any Idea what registry key to update ? or which driver ?
do you think a cab like the one for the Kayser can be compiled ?
Thanks
While youre on it, please get us the key for Swedish keyb as well
I flashed with the english ROM as well, and....
I am pretty sure there must be a way and it would be great to know the right registry location - would like to change mine over to QUERTZ as I am having an English rom with a German keyboard...
And ideas anyone?
Thanks
Alex
AE Keyboard Mapper
While we are waiting for better solution the buttons can be mapped to right letters wit AE Keyboard Mapper program. I've mapped my samsungs ä and ö buttons with that and they are working as they should.
Juggeli said:
While we are waiting for better solution the buttons can be mapped to right letters wit AE Keyboard Mapper program. I've mapped my samsungs ä and ö buttons with that and they are working as they should.
Click to expand...
Click to collapse
Yes it work but i creates a very irritating keybaord lag when using the keys that is mapped with AE keyboardmapper.
Yep, I have seen this tutorial, but I must admit that I am not at all interested in the software emulation. I 'd rather wait for a proper OS / registry / hw solution
No news guys ???
First of all, I'm no export in this and want to apologize for my english, cause I'm german.
Me too wants to change the keyboard layout as I have an english rom with qwerty and want to get back my german qwertz-layout.
As far as I've found out there is an registry entry under "HKLM/Hardware/DEVICEMAP/KEYBD/DriverName" which with my device maps to a dll named "zylonite_keypad_us.dll"
This file seems to be located in the ROM. I couldn't copy it for editing. Maybe someone can develop an idea how to deal with this.
solution here :
http://forum.xda-developers.com/showthread.php?t=290967
For now my keyboard does more, but I hope
webise said:
solution here :
http://forum.xda-developers.com/showthread.php?t=290967
For now my keyboard does more, but I hope
Click to expand...
Click to collapse
Do you have an I780?
If yes, which of these mentioned steps did you do?
This is not yet working for me. At the Moment the hardware keyboard doesn't work at all...
Edit: So, keyboard is working again. But "z" and "y" are still "swapped". So still not the German- QWERTZ
Same here, ive got an azerty i780, but this tip does'nt work for me
It doesn't work at all
The keyboard is rendered NON active by modifiying these reg keys / strings ...
webise said:
solution here :
http://forum.xda-developers.com/showthread.php?t=290967
For now my keyboard does more, but I hope
Click to expand...
Click to collapse
When I change the settings like that thread, my keyboard stopped working
I use the code: 041d for Swedish.
Mind helping out what I need to do? I followed the instructions from that page but the keyboard just stopped working, the hardware keyb that is.
In my humble opinion the problem is that when we change the registry keys we are telling windows to use a different dll that simply is not there, and so the keyboard becomes inactive. The solution is that someone with a German WM6 gets the german dll and shares it with us.
Regards,
Luís
Before flashing my azerty orange fr i780, i saved HKLM sytem tree, and the dll is the same.
The only difference in HKLM tree is :
\\HKLM\System\CurrentControlSet\Control\Keyboard Layout\Active
040c for azerty french
0409 for US
But doesn't work on my device
lmbranco said:
In my humble opinion the problem is that when we change the registry keys we are telling windows to use a different dll that simply is not there, and so the keyboard becomes inactive. The solution is that someone with a German WM6 gets the german dll and shares it with us.
Regards,
Luís
Click to expand...
Click to collapse
Or a Swedish ROM since there are a few of us that would need the swedish dll then
I still got the German phone and intend to upgrade to UK ROM. What dll exactly do you guys need?
dll is : zylonite_keypad_Us.dll
But totalcommander refuses to copy the file
entropy said:
I still got the German phone and intend to upgrade to UK ROM. What dll exactly do you guys need?
Click to expand...
Click to collapse
Do you have a registry editor on yout I780?
Then look at: HKLM/Hardware/DEVICEMAP/KEYBD/DriverName
There should be a .dll listed.
I guess thats the one we need. But I fear, as webise said, that you can't copy this file from your windows folder. As far as I've seen this file is in ROM.
Hi,
I want to create a bin file with my dumped rom (HHC2 FR), with the Samsung i780 kitchen 0.2 beta, but there is a connection issue.
Like famusc wrote in his post, the problem can be fixed by use another bin with the same language for the conversion. But all the bin I found has this problem.
Does anyone have an old french rom which works fine ?
If not, do you know how to fix this issue ?
Is it possible to fix it with the use of another rom language for the conversion ?
If I find a way to fix it, I'll upload it here.
Thx.
No one can help me ?
We have the same problem with the German rom. It seems that we can't use the kitchen to cook the rom and have to find another way. But here comes the problem. Maybe someone could give us advise....
mievalt said:
We have the same problem with the German rom. It seems that we can't use the kitchen to cook the rom and have to find another way. But here comes the problem. Maybe someone could give us advise....
Click to expand...
Click to collapse
I am inclined to port my WM6.1 release to "some" euro locales (Germania, Italino, French etc) I have ideas on how to do that but I don't think I have the time to selectively port the required MUIs.
I understand that, but maybe you can give us hints on how start filtering the MUIs or what you think we have to do. Just replacing the zylonite_keypad_Us.dll and the S00x files brings the result that the layout changes but the mouse and the touchscreen seem to not get along with it...
What do you think???
mievalt said:
I understand that, but maybe you can give us hints on how start filtering the MUIs or what you think we have to do. Just replacing the zylonite_keypad_Us.dll and the S00x files brings the result that the layout changes but the mouse and the touchscreen seem to not get along with it...
What do you think???
Click to expand...
Click to collapse
Changing the keyboard driver alone will not be sufficient. You need to have supporting MUIs to make them work in harmony. The MUIs need to be salvaged from pure Fr (for example) rom which runs on the desired DPI. IE, the MUIs must be extracted carefully out from the donor rom and then placed in the kitchen with the proper rgus that correspond to the Lang ID. But finding intact MUIs can be a problem in itself. Was there any official release for i780 Rom in Fr?
I don't know if there was in France, but in Germany we have an official release and I have the dumped files extracted from the clear german rom too...
mievalt said:
I don't know if there was in France, but in Germany we have an official release and I have the dumped files extracted from the clear german rom too...
Click to expand...
Click to collapse
So I assume that Germanic keyboard is applicable to Fr as well?
No don't think so because in France they got azerty and we here in germany have the qwertz layout. We just have to change the Y and Z... I don't know if it makes that easier... So you think that replacing the zylonite_keypad_Us.dll or editing it is not he right beginning...?????
mievalt said:
No don't think so because in France they got azerty and we here in germany have the qwertz layout. We just have to change the Y and Z... I don't know if it makes that easier... So you think that replacing the zylonite_keypad_Us.dll or editing it is not he right beginning...?????
Click to expand...
Click to collapse
I think you are on the right track, just that you can't rely 100% on that alone. If you are familar with rom cooking, then you can explore with sourcing out for MUI files from other roms (not necessarily i780) and do trial and error in cooking them.
Ok thanks for helping... I will try some MUIs from other ppc. But I think the problem is that the zylonite_Keypad_Us.dll is Samsung made think...
Thx for helping.
Is there a simple way to just fix the connexion issue in an fr rom ?
I have the raw files, the bin file and I just want to make change to this rom.
The connexion issue is : there is no connexion at the first start of windows mobile, IE and WLM don't work...
I only want to correct this bug, can anyone help me ?
Can I fix that by edit reg config ??
Looking for someone who can edit/translate all localization files from ROM.
We must edit all MUI, XML files etc so we can get fully translated ROM to POLISH language. We can edit ROM via HTC ROM EDITOR...
Model of the phone is HTC OZONE (non touch screen device).
In exchange I am offering Motorola Q9 GSM, 3G HSDPA, Bluetooth, GPS, Camera, WM6, ...
If anyone is interested send me PM I will send You WM6.5 ROM.
I have more phones to translate ...
genevaq said:
Looking for someone who can edit/translate all localization files from ROM.
We must edit all MUI, XML files etc so we can get fully translated ROM to POLISH language. We can edit ROM via HTC ROM EDITOR.
Click to expand...
Click to collapse
You don't need to translate mui files. Windows Mobile 6.5 Standard already have Polish localization files (0415 PLK Polish Polska).
hTC rom editor is not the best tool to use. It's better to cook a Polish ROM for Ozone.
Spiaatie said:
You don't need to translate mui files. Windows Mobile 6.5 Standard already have Polish localization files (0415 PLK Polish Polska).
hTC rom editor is not the best tool to use. It's better to cook a Polish ROM for Ozone.
Click to expand...
Click to collapse
Thank You for fast answer.
This model doesn't have 0415 (Polish) localization files but only 0409 (English) and 0C0A (Spanish).
Actually I did find similar model with Windows Mobile 6.5 Standard which has 0415 files so I exctracted them > changed names to 0409 > made CAB file > now OZONE has half of the desktop and half of the applications in Polish so we need to translate the rest.
I can send these files too to someone who is interested in translating.
genevaq said:
Actually I did find similar model with Windows Mobile 6.5 Standard which has 0415 files so I exctracted them > changed names to 0409 > made CAB file > now OZONE has half of the desktop and half of the applications in Polish so we need to translate the rest.
Click to expand...
Click to collapse
Ohh.. you're doing it the hard way.
I supose you use OEM packages from hTC Snap. Most files are the same, so there should be no need to translate them, you just need to replace the corrent ones.
But you will also need to change some registry keys to match Polish language, if not - it will stay half English, half Polish.