Related
i am new to pda's so take care with me, i am a real novice!!
any way it keeps frezzing up,
i have tomtom 3 blutooth sat nav, loaded on, which a college has given me!! it works fine but every time i touch the pda it frezzes (plus i dont need to touch it it just does it on its own accord,)
it isnt just when the tomtom is on,
it does it what ever i am doing!!
if you can help, please do!! but remember i may need well detailed info on what to do to rectifi the problem,
thanks bill
Bill, I had a similar problem with my wifes XDA II when I loaded Tomtom software onto it. I did the following and it resolved the problem for me, so you may want to give it a try (assuming you still have the problem).
Tap on Start (on the desktop screen)
Select Settings
Select the system tab at the bottom of the screen
Tap on the memory icon
Select the Running Programs tab
This opens up a window which shows you all the programs which are currently running on your PPC
Select STOP ALL from the options available
This will close all programs running on the system and free up your memory resource, so now go back to the desk top view.
Then start your Tomtom program up again as you would do normally and see if it freezes on you this time.
IMPORTANT ADVISE - You must close Tomtom down from the options within the program which, on my system is a large red EXIT APPLICATION icon found in the Navigator Menu.
Hope this works for you as well as it did for me.
Good luck :lol:
Piper
8) Go to the windows startup folder and delete connections.exe.
That will free up a lot of resources
Fatzzz
whats this do
connections.exe.
Other than connections.exe..
Hey everyone,
I just received my XDA IIs from Hong Kong 3 days ago. Since then, the PDA portion is working great. But the phone keeps locking up. I cannot hear caller and they cannot hear me. I have been soft resetting at least 2 x a day...and missing calls..
is there anything else that we should delete?
Thanks!
max0002
There is an inherent problem with the audio on this particular model (Blue Angel)
The problem seems to escalate if you use the Bluetooth Audio.
I experience the problem 2-3 times a week, even with the connections.exe removed from the Windows/Startup Folder.
Hopefully a new release of the Radio/Firmware will cure the problem.
Fatzzz
I have a weird issue with my TP2.
When i reset it... it boots up and i can see the HTC logo but tf3d won't start.. i went into settings unchecked tf3d and reticked it.. no difference!
How is the executable called? anyone elese experiencing this issue?
Known problem.
The best workaround I found till now:
1. Switch on Flightmode. (use the red phone button press for more than 3 seconds)
2 Reset/Restart
3. Switch off flightmode. The PIN screen comes up automatically.
Works in 100% of the cases.
Huib
You can run the manila.exe found in the Windows folder but I've found that when doing this, the clock on the home tab doesn't refresh/change and the notification balloons don't come up (the little round icon on the sms tab when you have unread sms's for example)
the workaround worked like a blast. Thanks..
I could not find that thread describing it.. i wonder why HTC did not release any hotfix for this.
How is the manila.exe started???
Hi!
I have the same issue, Touchflo3d not starting after boot on my swedish Touch Pro2.
If i try to manually start manila.exe i also get the clock freeze on the start screen and no mail/message notifications.
I've tried two hard resets, and adding programs and settings one at a time just to try to find the reason for this, but no luck. It feels like it's all random, it all works with apps installed, and suddenly it stops working, no changes made.
I notice that when i manually execute \windows\manila.exe the screen goes from the black screen with the HTC logo directly to the start screen of touchflo3d. When everything works the way it should do, there is a difference, a text appears on the black screen under the HTC logo, something like "starting Touchflo3D".
I'm not that good at windows mobile myself, but i hope someone on this forum, that has a phone with touchflo3d, can find the difference between starting the manila.exe manually, not seeing the "starting Touchflo"-test, compared to the automatic start with that text.
I hope that would lead to a solution or fix, i would not mind very much having to start touchflo myself with a click, but i'd like to start it the same way it does when working so the clock and notifications work as it should.
Let's all hope some of the many extremly skilled members here picks up the glove and takes a good look at this!!
Best regards
Cerebral Cortex
Phone screen will disapper?
herpi said:
Known problem.
The best workaround I found till now:
1. Switch on Flightmode. (use the red phone button press for more than 3 seconds)
2 Reset/Restart
3. Switch off flightmode. The PIN screen comes up automatically.
Works in 100% of the cases.
Huib
Click to expand...
Click to collapse
Thanx it worked for me!
But now TF3D will come in front when I make a call. So after 5 seconds calling the first screen of TF3D (the clock) will appear. Then I have to press the first button (phone) to get the phone screen again. Verry sad.
I also can not use the program Notes anymore when calling, the program will go to the back. And TF3D will come to the front!
Someone know the answer?
Thanx in advance,
Richard
Hi,
i had the same problem and tried many solutions until i found what was the cause for that problem: S2U2. Once i disabled the S2U2-autostart on boot up, tf3d is always starting the way its supposed to. I simply removed the ilock2-shortcut from windows/autostart and start it manually after tf3d has launched. Not really perfect, but better than everything else for me.
Do you use S2U2?
Regards
MiDiAN
MiDiANx360 said:
Hi,
i had the same problem and tried many solutions until i found what was the cause for that problem: S2U2. Once i disabled the S2U2-autostart on boot up, tf3d is always starting the way its supposed to. I simply removed the ilock2-shortcut from windows/autostart and start it manually after tf3d has launched. Not really perfect, but better than everything else for me.
Do you use S2U2?
Regards
MiDiAN
Click to expand...
Click to collapse
I did the same, disabled s2u2, and no more problems. After a while however the hanging came back randomly.
S2u2 is back now. Mothers little helper! I can live with the flightmode on and off solution.
Huib
Quote:
Originally Posted by daveke0201
have a problem with s2u2 v2.04 wvga and 3dtf. after installation it wont boot anymore.
this is what i tried.
start stop 3dtf => not starting
stop ilock2, stop start 3dtf => not starting.
does work with the 1.62.
can anyone help me?
************* reply from ac ************
Try to set a longer "Boot-up Delay" (S2U2 Settings->Advanced).
__________________
Cheers,
A_C
http://ac-s2.com
*******************************************
I've set my bootup delay in the advanced menu to 20seconds and my problem is gone.
pieterbotes said:
I've set my bootup delay in the advanced menu to 20seconds and my problem is gone.
Click to expand...
Click to collapse
Nope, 20 secs does not do the job in my case.
Tried several combinations and different ways of startup, but no deal.
I already had the problem without S2U2 so I cannot possibly blame them.
I still am stuck at the flightmode trick which gives a 100% success.
Huib
Moisture damage perhaps???
herpi said:
Known problem.
The best workaround I found till now:
1. Switch on Flightmode. (use the red phone button press for more than 3 seconds)
2 Reset/Restart
3. Switch off flightmode. The PIN screen comes up automatically.
Works in 100% of the cases.
Huib
Click to expand...
Click to collapse
I have the same issue. The first time this behavior surfaced for me was right after i´d applied Zagg´s inivisible shield.
I must admit that i lacked the patience to be leaving the phone for 12 hours drying up.
I´d put it in a dry, warm & well ventilated place for approximately 4 hours and thought that should suffice.
When the phone started acting up i used up all the non-printable 4 letter words i knew and did a hard reset.
Anyway - the problem has showed up about every third time i do a soft reset.
To me the solution has so far been another soft-reset.
Regards
Have the same problem, it's driving me nuts. Hate reseting the phone - it takes ages to boot up.
Won't spend time trying to fix this, will just not reboot/reset often. Hopefully the WM6.5/TF3D official package sometime in October will cure this.
vasra said:
Have the same problem, it's driving me nuts. Hate reseting the phone - it takes ages to boot up.
Won't spend time trying to fix this, will just not reboot/reset often. Hopefully the WM6.5/TF3D official package sometime in October will cure this.
Click to expand...
Click to collapse
I combine the flightmode trick together with the SlidetoShutdown, where I use the restart slider.
Doing it this way makes it more acceptable.
Huib
Hmm... I've had success with the 20 second thing but now that is also not working for me anymore... not sure what changed.
pieterbotes said:
Hmm... I've had success with the 20 second thing but now that is also not working for me anymore... not sure what changed.
Click to expand...
Click to collapse
It is quite random.
The flight-on/restart/flight-off always works, at least in my tp2.
Huib
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile
All,
Upgraded my unbranded UK TP2 to WM6.5 yesterday and just re-installed all the apps; here's some initial impressions.
It IS worth doing the hard reset to do the upgrade. First off, you're going to have a nice clean install which is always a good thing; secondly WM6.5 itself is more evolution than revolution; small graphical tweaks, things are 'easier' to stab at with your fingers (the screen seems more forgiving), and text/menu options/e-mails etc are spaced out more to make using the device easier on the run.
Some changes/good things/quirks in WM6.5:
Owner information option is gone from the "settings" menu. Simply activate on the Today Screen, click where it says "Touch here to enter owner information" and you're in the same place. Don't bother messing with a nice clean install with that .cab file doing the rounds on here when you just don't have to.
The honeycomb menu is a personal choice, but it's flexible and clean looking enough to make it easy to navigate around. I've gone from using SPB Menu 2 (as version 3 just did NOT integrate with TF3D and the phone contacts (soft key) option) back to just using the standard WM6.5 menu and Today Screen.
WM6.5 introduces new options to reject calls with a text message - most useful.
WM6.5 introduces a new option to automatically activate the pen notes application when the stylus is removed from the holster during a call. The main reason to remove the stylus is to scribble a phone number down, so this option is again, most welcome.
VOICE DIALLING OVER BLUETOOTH WORKS AGAIN! The feature I missed the most on my TP2 works again. I installed MS Voice Dialler 1.6UK version and with my Jawbone BT headset I'm back to normal operation.
Re-organising the main honeycomb menu is a little painful; rather than a nice "hold and drag" method, you can only "Move To Top" or "Move Down". Putting things into folders and using File Explorer is the order of the day.
The new 'slide to unlock' screen lock is a real boon for not messing up your phone while it's in your holster and avoids installing battery killing 3rd party apps.
FM Radio application is installed as a default. Again, no need for 3rd party hacks or apps.
WiFi reception and throughput speed appears to have been boosted. I certainly get a better reception in my home, in the same locations I used to get slow/juttery video streaming in.
Battery increments - not seen it in 1% as yet, anyone else confirm if it's 1 or 10% increments?
No major application incompatibility problems that I can see as yet.
Run the Rhodium Advanced Config app over the device to ensure fast GPS, A-GPS and the like is tweaked to your convenience and you'll find you can get pretty much everything you want done with a standard configuration, with your normal apps installed on it, rather than hacking and tweaking. As a result the system takes a much smaller memory footprint and everything seems to hang together more smoothly and without slowing the system down.
Hope this helps clear some things up for your normal/power users looking to update their devices. All-in-all I'm really happy with the WM6.5 update. It almost feels like the TP2 was made in the first place for WM6.5 and its just come to life with it, almost as if WM6.1 was a (temporary) necessary retrograde step that HTC didn't want to do...
Thanks and be good to see other people's feedback on the update.
Adam.
Thx for the update.
Very glad to hear that voice dialing over BT is working again and that there is a slide to lock and FM Radio (without having to install battery killing 3th party apps).
Looks very promising.
Hope I can install this soon and add some comments. Dutch version however not yet available.
The quick drop down menu from the start button is gone in 6.5/ Is there a decent cab to get it back? I've tried some previously that did not work. One thing I would miss with 6.5. Yeah, I know a petty thing to some, important to me.
I dislike BT so that feature means nothing, don't care for titanium or tf3d, so ms 3.5 is my prefered ui. My tp2 is one of the most finger friendly phones I've had yet even while running 6.1 . I know it always seems to make sense to upgrade to the latest and greatest, but the latest isn't neccessarily the greatest.
Having tried several diff cooked 6.5's on my old tp I may sit this one out for awhile. If you've neve tried 6.5 then by all means one should give it a try. Judge for yourself.
Bluetooth
Does the fact that Voice Dialling now works over BT mean that htc have upgraded the BT stack, ie hopefully gone back to the MS one?
adamchap said:
The new 'slide to unlock' screen lock is a real boon for not messing up your phone while it's in your holster and avoids installing battery killing 3rd party apps.
Adam.
Click to expand...
Click to collapse
Maybe I'm missing something. It seems that the slide to unlock doesn't lock the hardware buttons. If the phone is in a case or a pocket and a call comes in, it's possible to accidentally press the hardware accept or hang up button. That's a problem that only seems solvable using 3rd party apps.
I'm very satisfied with this 6.5 rom release. It includes basically everything I wanted. The only thing is the Manila 6.5 with the animated today menu that changes as the weather from your localization changes.
even though this official release of winMo 6.5 looks great (installed the french one on an unbranded tp2) :
-i think the colored tf3d look is giving the rhodium a less serious image (too much green in it
-in general, the OS seem to be quite heavy for the device
-there's an obvious problem with the tf3d today clock (which is always giving me exactly 1hour & 2minutes earlier for 2seconds everytime i press the "no" button)
-also i noticed that the wi-fi antenna doesn't automatically reconnect to the selected network after i put the phone out of sleep mode, while the wi-fi antenna stays active on the phone!!?
and seriously guys, i still don't get why they didn't provide tp2 users with manila 2.5, it makes absolutelly no "SENSE"
thank you so much.
could you tell us if tom tom run ok and if you can use it in landscape mode?
s2u2 is compatible?
sorry of my english.
thank you
true2you said:
also i noticed that the wi-fi antenna doesn't automatically reconnect to the selected network after i put the phone out of sleep mode, while the wi-fi antenna stays active on the phone!!?
Click to expand...
Click to collapse
agreed, it's a bit annoying, it also deactiveates the wi-fi when you soft reset the device... I'm sure there will be a tweak for it soon!
malumbreras said:
thank you so much.
could you tell us if tom tom run ok and if you can use it in landscape mode?
s2u2 is compatible?
sorry of my english.
thank you
Click to expand...
Click to collapse
s2u2 still works but the new 'lock' that this version of Windows Mobile is very similar...
I noticed the thing about the clock temporarily showing the time an hour and 2 minutes earlier for about 2 seconds. Can the OP please explain how I can get the owner info screen to enter my details. I cant find anywhere on the today screen where it says 'tap to enter information'
lombardo8 said:
I noticed the thing about the clock temporarily showing the time an hour and 2 minutes earlier for about 2 seconds. Can the OP please explain how I can get the owner info screen to enter my details. I cant find anywhere on the today screen where it says 'tap to enter information'
Click to expand...
Click to collapse
For the Owner info - see this topic (link in first page):
http://forum.xda-developers.com/showthread.php?t=571376
lombardo8 said:
I noticed the thing about the clock temporarily showing the time an hour and 2 minutes earlier for about 2 seconds.
Click to expand...
Click to collapse
This is a feature of the manila/sense itself to give the effect of the old clocks with the flipping numbers.
t69broken said:
This is a feature of the manila/sense itself to give the effect of the old clocks with the flipping numbers.
Click to expand...
Click to collapse
but the new clocks still flips as well......
never had this with the stock rom, plus it's more than annoying when it happens after using the task manager or locking the device with the "no/end call" button... so it often happens to me and when it does, it's three times in two seconds so thanks to htc guys for making it worst
t69broken said:
This is a feature of the manila/sense itself to give the effect of the old clocks with the flipping numbers.
Click to expand...
Click to collapse
never had this with the stock rom, plus it's more than annoying when it happens after using the task manager or locking the device with the "no/end call" button... so it often happens to me and when it does, it's three times in two seconds so thanks to htc guys for making it worst
true2you said:
never had this with the stock rom, plus it's more than annoying when it happens after using the task manager or locking the device with the "no/end call" button... so it often happens to me and when it does, it's three times in two seconds so thanks to htc guys for making it worst
Click to expand...
Click to collapse
I think it actually has something to do with the my location thing, but since I can't get that to work properly most of it is just an annoyance. Lol
E-mail to HTC (bug that I found in Manila 2.1 in the WM 6.1 that still maintains in WM 6.5):
Good Morning
I've been using the Windows Mobile 6.1 for a while and found a bug that I was expecting to be solved in the 6.5 release but unfortunately no.
When I choose in the weather tab the City of Lisbon, Portugal and update the forecast it corrects me the system time to GMT CASABLANCA instead of using the correct GMT LONDON, DUBLIN.
The Portuguese Time includes changes to the Winter Time and Summer Time, like in UK. To correct that I need to use always as my default city London, not taking use of the function from the new Manila: "My Location".
Can that be corrected in a next release?
Best Regards
Márcio Teixeira
apv245l said:
Does the fact that Voice Dialling now works over BT mean that htc have upgraded the BT stack, ie hopefully gone back to the MS one?
Click to expand...
Click to collapse
Nope, it's still the WidComm BT Stack.
lombardo8 said:
I noticed the thing about the clock temporarily showing the time an hour and 2 minutes earlier for about 2 seconds. Can the OP please explain how I can get the owner info screen to enter my details. I cant find anywhere on the today screen where it says 'tap to enter information'
Click to expand...
Click to collapse
Quick and easy - don't bother downloading and installing cabs, this is easier!
Go to Settings -> Today and make sure that in the "Items" tab, the option for "Owner Info" is ticked.
Now go to your today screen. There will be the owner information line - and if you've entered nothing, it'll say "Tap to enter info..." just tap there and enter the info in the control panel that appears.
If you then don't want Owner Info on your today screen (but just wanted to enter a username for app registration etc), then go back into Settings -> Today and untick the Owner Info option.
Thx,
Adam.
Anybody know if there's a way to change the update interval for the weather tab in TF3D? I'm not even sure how often mine currently updates; I've seen it say "Last Update" as old as 3 hours. I most often see it as 2 hours, so I assume it's updating right around every 3 hours or so.
I'd like to get it to update at least every hour, if not every half hour. The weather here in Minnesota can change pretty quickly!
Does anybody know how to do this?
Any and all help is greatly appreciated!
That's a mystery to me, too. Under menu/settings, you can check "Download weather automatically." But it doesn't say how often and I don't see where you can set or change the interval.
Any ROM with Sense/TF3D/Manila 2.5 allows specified update times for stock, weather, etc. There's a link in my signature to EnergyROM, and it has TF3D 2.5. The only downside to TF3D 2.5 is that it doesn't support landscape, and can be slightly laggy at times.
I'm using the Energy ROM, but it's the newest one which had Manila backed off to 2.1 (I think).
Is this still possible somehow without going to Manila 2.5?
Thanks,
Correct me if I’m wrong, but it seems to me the “auto update” feature isn’t what most people think it should be. I’ve observed that if you have the auto update toggled on, it just means that every time you navigate to the weather tab and the weather is over 3 hrs old, your device will attempt to retrieve updated info. It doesn’t retrieve the updated info on a fixed regular interval in the background. You must navigate to the weather tab to trigger the update.
I do believe it automatically updates in the background after around 3 hours as well, because I have at times went to the weather tab and found it to be, for instance, 14 minutes old.
It's just annoying because I'm using a Today Screen that has the weather underneath the clock. so if it updates at, say, 7 in the morning and it's 31 degrees out, then I look again at 9:30am and the today screen still says 31 degrees, when its actually gotten up to, say, 42 degrees. That's what happened this morning...
DaveTheTytnIIGuy said:
Any ROM with Sense/TF3D/Manila 2.5 allows specified update times for stock, weather, etc. There's a link in my signature to EnergyROM, and it has TF3D 2.5. The only downside to TF3D 2.5 is that it doesn't support landscape, and can be slightly laggy at times.
Click to expand...
Click to collapse
Shame this is only for manila 2.5
ohyeahar said:
Correct me if I’m wrong, but it seems to me the “auto update” feature isn’t what most people think it should be. I’ve observed that if you have the auto update toggled on, it just means that every time you navigate to the weather tab and the weather is over 3 hrs old, your device will attempt to retrieve updated info. It doesn’t retrieve the updated info on a fixed regular interval in the background. You must navigate to the weather tab to trigger the update.
Click to expand...
Click to collapse
Yeas, same behavior here.
Perhaps any registry edit?
Hope this can have a solution as it´s very annoying
Thanks,
Looking for a reg hack for this too .. seems odd that it does not update more often if you want it too .. i have unlimited bandwith so not a big deal to me ...
someone ? Help us ?
bump..
I too would like to know the answer to this, its annoying looking at it and haing o check the last time it updated Kinda defeats the purpose
I wonder i seem to not be seeing full animation on the home screen, just a short fade in. No Temperature either, any thoughts?
I am using Energy Rom with 2.1 on TILT2
After it auto updates, does it disconnect the data connection on it's own or do you have to manually disconnect it? I'm only worried that if the phone stays connected, it will drain my battery way to fast.
On mine the data connection stays on so i turn off auto update.
Scann69 said:
After it auto updates, does it disconnect the data connection on it's own or do you have to manually disconnect it? I'm only worried that if the phone stays connected, it will drain my battery way to fast.
On mine the data connection stays on so i turn off auto update.
Click to expand...
Click to collapse
Try this instead: Download and install Advanced Config if you don't already have it (most cooked ROMs do), run it, tap the "Menu" softkey, then "More Settings" then "Connections". Then, check the "Disconnect after:" box, and set it to whatever you like (mine's set at 5 minutes). Tap "OK" at the bottom, exit Advanced Config, soft reset and the changes will take effect. In my experience, your battery life will be much better after doing this.
DaveTheTytnIIGuy said:
Try this instead: Download and install Advanced Config if you don't already have it (most cooked ROMs do), run it, tap the "Menu" softkey, then "More Settings" then "Connections". Then, check the "Disconnect after:" box, and set it to whatever you like (mine's set at 5 minutes). Tap "OK" at the bottom, exit Advanced Config, soft reset and the changes will take effect. In my experience, your battery life will be much better after doing this.
Click to expand...
Click to collapse
Ok that makes sense Thanks for the tip. I don't have Advance Config tool but i'm using Tweak UI and it has that option too.
I'll see how it goes
SOLVED!
Got it working folks! I added the reg entry from a Sense 2.5 ROM, and can confirm that I've got it auto updating weather every half hour!!
Create this DWord entry in the following key:
HKCU\Software\HTC\Manila\
Dword Name:
Weather.AutoDownloadInterval
DWord Value:
30 (Decimal)
Change the value to whatever time you want in minutes. Reboot. Voila!
Enjoy!
SOLVED - Can set Sense 2.1 weather update frequency!!
Had been trying for some time to get the weather tab (and therefore the weather under the clock) to update more frequently than every 2 - 3 hours. I added the reg entry from a Sense 2.5 ROM, and can confirm that I've got it auto updating weather every half hour!!
Create this DWord entry in the following key:
HKCU\Software\HTC\Manila\
Dword Name:
Weather.AutoDownloadInterval
DWord Value:
30 (Decimal)
Change the value to whatever time you want in minutes. Reboot. Voila!
Enjoy!
NOW THAT IS WHAT I AM TALKIN ABOUT!
Excellent work bro. Been looking for this for a looong time.
Checking it as we speak.
Any trick for automatic update of the weather image.
I mean for example: now is night ... I update the weather application via internet ... the image is e.g. the moon (but I also have the meteo for next 3 days)... If I don't update again, the image of the moon still remain even at midday and don't change also the day after. Is it possible to have an image that change updated with the clock? I don't want update constantly via internet for having a correct image on my today screen
SPB weather do this correctly.
Sorry for my bad english ... I hope you can understand.
Thanks in advance.
muccamucca said:
Any trick for automatic update of the weather image.
I mean for example: now is night ... I update the weather application via internet ... the image is e.g. the moon (but I also have the meteo for next 3 days)... If I don't update again, the image of the moon still remain even at midday and don't change also the day after. Is it possible to have an image that change updated with the clock? I don't want update constantly via internet for having a correct image on my today screen
SPB weather do this correctly.
Sorry for my bad english ... I hope you can understand.
Thanks in advance.
Click to expand...
Click to collapse
The image updates with the weather...because it displays the weather, not just day-or-night. I mean, it doesn't show just a sun or moon, it can be sun-with-clouds, moon-with-rain, etc. So that's why it doesn't change if you don't update the weather. If you set it to update once every hour or two...that's a very small hit on battery life.
Okay, this "hack" is behaving a little strangely. I absolutely know for certain that it essentially works - my weather has updated every half hour numerous times now. But, if you've got a weak signal and the weather CAN'T update at the required time, it seems to break. It has happened once now, and I looked at the weather tab and it said last updated 1 hour ago.
What I SHOULD have done then was just wait, to see when it finally tried again. But instead I hit the update button and updated it, after which it worked as it should and updated every half hour.
So, once it "breaks" by not being able to retrieve the update, I need to find out how long it waits after that, and if it DOES finally auto update again, whether or not it sticks to the half hour interval after.
I'll keep an eye on it and let you know what happens. In the meantime, I absolutely suggest adding that reg entry! No ill effects so far, even once "broke" I'm certain it will auto update again eventually. Plus, it doesn't fail to update often at all (only when my signal is at like 1 bar), so for day to day purposes this should be excellent.
And like I said, if it does fail, you just have to manually update it once and it's back up again.
GOod luck, let me know if anyone else experiences this. I just tend to go to a few places with no signal alot...
THanks,
Jeff
notaliberal said:
Okay, this "hack" is behaving a little strangely. I absolutely know for certain that it essentially works - my weather has updated every half hour numerous times now. But, if you've got a weak signal and the weather CAN'T update at the required time, it seems to break. It has happened once now, and I looked at the weather tab and it said last updated 1 hour ago.
What I SHOULD have done then was just wait, to see when it finally tried again. But instead I hit the update button and updated it, after which it worked as it should and updated every half hour.
So, once it "breaks" by not being able to retrieve the update, I need to find out how long it waits after that, and if it DOES finally auto update again, whether or not it sticks to the half hour interval after.
I'll keep an eye on it and let you know what happens. In the meantime, I absolutely suggest adding that reg entry! No ill effects so far, even once "broke" I'm certain it will auto update again eventually. Plus, it doesn't fail to update often at all (only when my signal is at like 1 bar), so for day to day purposes this should be excellent.
And like I said, if it does fail, you just have to manually update it once and it's back up again.
GOod luck, let me know if anyone else experiences this. I just tend to go to a few places with no signal alot...
THanks,
Jeff
Click to expand...
Click to collapse
Jeff.....thank you soooooo much for discovering this!! Im going to try this asap !! I have been wanting to autoupdate the weather at a specific time interval forever. Also, if someone could cab this or better yet add it to advance config or other config app which you could easily edit the time interval...that would be luv. Thanks again for this.
p.s. could you post which rom and radio your using..
My pleasure!
It's still a little flaky, but I think that's because the URL for the updates is being flaky. I tried a manual update 4 times before it was successful. THen I set the interval to 10 minutes, and it indeed updated appropriately every 10 mins. So again, it works, but it appears we're at the mercy of the server that's dishing out the weather info.
I'm on the Energy ROM from 11/08/2009 and I'm using the 4.49.25.05 Radio.
I would absolutely cab this up for you, but I have not learned how yet. So until someone else can, you're going to have to make the reg entry by hand.
If someone does cab this up, might I suggest making several cabs for different update times. Perhaps a 30 minute, a 60 minute, and a 15 minute for the really hardcore junkies?
Thanks, good luck, and enjoy the more frequent updates!
EDIT:
Having trouble keeping the program focusing, so does not work yet.
It's a basic program which makes sure the display doesn't timeout while TomTom is running. Devices such as the HTC Maple and the HTC Excalibur doesn't support this function natively.
I have only tested it on my HTC Maple and it works fine. The default path to TomTom is \Storage Card\Program Files\Navigator\TomTom Navigator.exe
It comes with two programs, one is for launching TomTom and the other one is to change the default path. I suggest copying the files into your TomTom folder, but it doesn't matter. Remember to create a shortcut to the launcher and add it to your startmenu for easy access.
It could work on the HTC Excalibur but I haven't tested yet, so If someone could test and reply to this thread, that would be great.
Hmm?!? I've been using WinMo for quite some years, since Qtek S200 and also serveral different versions of TomTom, 5 6 and 7, and I never, but never saw my pda going timeout due to TomTom...
The same I cannot say of iGo8...
onesolo said:
Hmm?!? I've been using WinMo for quite some years, since Qtek S200 and also serveral different versions of TomTom, 5 6 and 7, and I never, but never saw my pda going timeout due to TomTom...
The same I cannot say of iGo8...
Click to expand...
Click to collapse
I think the timeout being referred to is when you have a PIN setup? I am going to download and try on Diamond - will post result.
Can it be used for Garmin as well?
I don't know about Tom Tom but I have the same issue with Garmin - could you modify this app so that it will so the same for Garmin? WOuld be greatly appreciated
burnes said:
I think the timeout being referred to is when you have a PIN setup? I am going to download and try on Diamond - will post result.
Click to expand...
Click to collapse
What pin setup??
onesolo said:
Hmm?!? I've been using WinMo for quite some years, since Qtek S200 and also serveral different versions of TomTom, 5 6 and 7, and I never, but never saw my pda going timeout due to TomTom...
The same I cannot say of iGo8...
Click to expand...
Click to collapse
Your right, I've used the HTC Universal and that work fine for TomTom. But with phones such as the HTC Excalibur and now my phone the HTC Maple, the TomTom times out. So the problem probably vary with different phones and maybe even different TomTom version.
Ross202 said:
I don't know about Tom Tom but I have the same issue with Garmin - could you modify this app so that it will so the same for Garmin? WOuld be greatly appreciated
Click to expand...
Click to collapse
Have you tried using this program with Garmin as well? Even though it says its for tomtom it could be used for other programs.
If it doesn't work its probably because your device has a different pvDevice name than my HTC Maple. The pvDevice name is needed to access the power functions on the phone (Mine is BKL1: ). What is your device name? I could check the pvDevice name and update the program to work with your phone and my phone
Same issue with Garmin
Have you tried using this program with Garmin as well? Even though it says its for tomtom it could be used for other programs.
If it doesn't work its probably because your device has a different pvDevice name than my HTC Maple. The pvDevice name is needed to access the power functions on the phone (Mine is BKL1: ). What is your device name? I could check the pvDevice name and update the program to work with your phone and my phone [/QUOTE]
Thanks for the prompt reply. I am currently using my old iMate JasJam (runs wm6.1) as the GPS chip on my HD2 died. It is - hopefully - being repaired as we speak. However, as I am off to the Czech Republic in a week for a holiday I may have to use it instead. Nothing worse than having to restart the phone every 5 min as you are walking around trying to see the sights.
Don't know what "pvDevice name" is or where to find it. Under Device settings in wm6.1 it says my model no is Herm100 and Platform is PocketPC using CRCs rom version r13.5 but I'm guessing that's not what you are referring to.
I will try just installing it and see what happens. Any further help would be greatly appreciated as this app would be brilliant.
Edit: 1: Just edited the "Save TomTom.exe path" file to point the Tom Tom Navigator launcher to Garmin instead. This has worked to launch Garmin instead of Tom Tom but it still cuts out after a few minutes. I also have S2U2 running so I will add Garmin to the Exceptional Exe list on that and see if that helps.
Edit: 2: Still turned itself even after adding to S2U2 Exceptional Exe's!
Ross202 said:
Thanks for the prompt reply. I am currently using my old iMate JasJam (runs wm6.1) as the GPS chip on my HD2 died. It is - hopefully - being repaired as we speak. However, as I am off to the Czech Republic in a week for a holiday I may have to use it instead. Nothing worse than having to restart the phone every 5 min as you are walking around trying to see the sights.
Don't know what "pvDevice name" is or where to find it. Under Device settings in wm6.1 it says my model no is Herm100 and Platform is PocketPC using CRCs rom version r13.5 but I'm guessing that's not what you are referring to.
I will try just installing it and see what happens. Any further help would be greatly appreciated as this app would be brilliant.
Edit: 1: Just edited the "Save TomTom.exe path" file to point the Tom Tom Navigator launcher to Garmin instead. This has worked to launch Garmin instead of Tom Tom but it still cuts out after a few minutes. I also have S2U2 running so I will add Garmin to the Exceptional Exe list on that and see if that helps.
Edit: 2: Still turned itself even after adding to S2U2 Exceptional Exe's!
Click to expand...
Click to collapse
Im really sorry. I just did a full test today and It seems even I can't get it working . The screen stays on but it loses focus after a while. I'll start working on it now!
When you say "cuts out after a few minutes" is that the display turning off? Or just Garmin losing focus?
Nothing to apologise for - just to have someone develop such an app and make it available for free is a privilege - wish I had the knowledge and skills to do it.
To answer your question, the screen turns off - I have to press the screen-on button at the side of the jasjam, then navigate to the Garmin program launch icon and press it. The program comes back up to where it left off so I guess it must still be running in the background. Of course, when I am on external power this is not a problem - it keeps running. OK in the car but not much good when walking around.
I have noticed that in System/Backlight settings the screen is set to turn off after 5min when on Battery Power so I have unchecked this option, ie screen shouldn't ever turn off. This seems to be working; however, when Garmin is turned off I then have to remember to reset the backlight-off timeout otherwise I'll quickly have a flat battery.
Nowhere near as elegant as your app promises to be.
Have had Garmin running for past 10 min while I have been typing/composing this reply and it hasn't dropped out ..... yet.
What do you mean by "losing focus"
Further to above, I have had Garmin running non-stop since the above post - 30 min - so unchecking the "turn off screen backlight" seems to have done the trick. Now I just have to go through the nausea of manually checking it again in he system properties.
Thanks for your assistance.
What do you mean by "losing focus"
Click to expand...
Click to collapse
Its just like your desktop, when you are doing something in a window, be it typing, mouse clicking etc, you are focused to that window. But as soon as you click another window your focus changes to that window. So whats happening with this program is its focused on TomTom for around 30s but then it is losing focus to something in the background. Nothing visually happens on the screen, but as soon as I press a key it switches to the background.
It sounds like even the backlight doesn't stay on for you...
Hopefully I can figure this problem out by soon, when I do, ill post
For your info, I have two settings that seem to be relevant both related to Battery Power:
1. Settings>System>backlight>battery power> uncheck "turnoff backlight if device not used for ..."
2. Settings>System>power>advanced> on battery power> uncheck "turnoff device if device not used for ..."
When the Garmin first turned itself off I noted that "1" was checked and set to 5 minutes and "2" was checked and set to 2 minutes. 2 minutes seemed to be the time it took before the phone/screen turned itself off. Once I unchecked "1" the setting @ "2" was irrelevant.
Re loss of focus - no, the screen went blank. When I pressed the power on button for the screen the "today" screen came back up. I then pressed the program launcher>Garmin and Garmin resumed where it had left off.
Hope this helps. Regards Ross
Just a heads up.
You can just download a LightJacker from this address:
http://w1.ozone.mine.nu/default.asp?c=index_lj Looks like it does what people want and is easy to use.