Related
Hi all,
Does the XDA2s and Microsofts Voice Command work on a XDA2s?
I'm not English, but I'm sure my English is good enought!
Whenever I give a voice command I get a "please repeate" error..
I think it's something with the mic gain, but where and how do I set it lower? Enabling/Disabling the Microphone AGC settings did not really help!
Any suggestions?
You should rather forget about this application. I tried to use it but with no success, exactly like you. Then I tried other applications (with the same result) and finally I followed suggestions from this forum: Neuvoice - it works and it's cheap.
Rgds
Maciej L
Maciej L said:
You should rather forget about this application. I tried to use it but with no success, exactly like you. Then I tried other applications (with the same result) and finally I followed suggestions from this forum: Neuvoice - it works and it's cheap.
Rgds
Maciej L
Click to expand...
Click to collapse
Thanks Maciej L,
Yes I think I will dump it.. It really sucks...
Looks nice the Neuvoice. To bad there is no demo to test it 1st
Yes there is a demo version, just download the full version from somewhere and it works as demo until you purchase the unlock code (as far as I can remember - but I'm not 100% sure - so you should by yourself)
Rgds
Maciej L
XDA IIs Fonix Application
I have just received my XDAIIs upgrade from an XDA II and it comes complete with Fonix Voice Dial. It automatically records test voices against your contacts (name number) and then you can call it up any time. You can also record your own voice which makes it more efficient. It also works with bluetooth. It seems an OK applicaiton to me.
Is this what you have been talking about? :lol:
In a quiet environment, it really doesn't have any problems with recognizing my commands. As long as you don't have a terrible English accent. However, you can forget about if you are in a loud environment though.
of where you have downloaded it to you.
I don't find any demo in any place
greetings and thank you
XDA IIs Voice Software
I got mine with the XDA IIs cd but try Handango.com who have a good range of voice software including Vito Voice....
you have registered in your cd ?¿?
regards
Voice Command 1.5
well, I have to say MS Voice Command works great for me. 95% hit rate on about 1000 contacts in my xdaIIs. Even in the car. Far better that V1.01. A couple of tips from my experienece with it.
1. Make sure the microphone auto gain is "disabled"
2. If it initially has problems and hit rate is very low, a soft reset usually sorts it out
3. Map the "record" button to Voice Command for easier access.
4. If your car is noisy, use a wired head set while driving. (I have not been able to get the bluetooth voice dialing to work at this point)
Re: Voice Command 1.5
cbrow51 said:
well, I have to say MS Voice Command works great for me. 95% hit rate on about 1000 contacts in my xdaIIs. Even in the car. Far better that V1.01. A couple of tips from my experienece with it.
1. Make sure the microphone auto gain is "disabled"
2. If it initially has problems and hit rate is very low, a soft reset usually sorts it out
3. Map the "record" button to Voice Command for easier access.
4. If your car is noisy, use a wired head set while driving. (I have not been able to get the bluetooth voice dialing to work at this point)
Click to expand...
Click to collapse
Hmmm... With none of the Voice dial programs I've been able to get the bluetooth to work.. Not sure if it's the bluetooth unit itself, or if it's some ROM version thingy...
The BT headset is a SE HBH-600. The XDA2s is with ROM version 1.12.62 WWE and radio version 1.02.00.
Can/will this work with bluetooth voice dialing??
MS Voice Command & BT Voice Dialing
No, sorry, I have not been able to make it work. I think its still an issue with the implementation of the BT stack (in this case the Widcomm stack) on the HTC devices. I can establish a connect from my headset to the device, but does not "link up" with voice dialing.
I now use a regular noise cancelling wired headset in the car, via an adapter plug sold by PockPCTechs (www.pocketpctechs.com) Other wise just use the phone mic to initiate a voice command dialed call
Regards
Chris
Re: MS Voice Command & BT Voice Dialing
cbrow51 said:
Other wise just use the phone mic to initiate a voice command dialed call
Click to expand...
Click to collapse
I was going to ask how well this works?
I'm getting a BT car kit fitted literally in the next hour and was hoping I'd be able to voice dial like I could my old Nokia, while driving.
I am using
O2 xda2s with microsoft voice software
I have a fairly noisy sports car but it works well..
I have the voice mapped to contacts button so one press and direct voice towards pda and no botha.... about 95% hit rate on 200 contacts..
I must add it has only been that good since buying a brodgit car cradle so it positioned well.. obviously you have to turn stereo off
the only complaint i have with it is that when the voice speaks back to you to confirm what you have said I cant hear it very well..
does anyone know of any settings to improve audio levels..
cheers
stay happy
Hi Guys
I have upgraded my 'Voice Command' handsfree solution as follows.
1. Added an FM 'Sound Feeder' from Pocketpctechs, that connects to the xda via one of 2 different pocketpctechs audio adaptors.
2. Tune the radio to one of the 8 frequencies supported by the Sound Feeder and the xda then plays all audio output through the car stereo system. This works for all apps, including my Navman GPS and Media Player!. I also mapped a button (I used the record button) to Voice Command, so one press activates VC and I can initiate a call by voice from there.
The really nice thing about this arrangement is that if i have media player running through the system, and a call comes in, the music mutes automatically, the phone rings, and i can take the call. When you end the call, media player picks right up again!
3. For the microphone part, there are 2 options:
a. The one I am using right now, is to use the pocketpctech 'single' adaptor, that allows sound to play through the stereo, while keeping the mic of the xda active. This means the xda picks up your voice directly for voice command and telecons, while at the same time playing the sound you normally hear via headphones, through the stereo. This works great for the incoming voice, although you need to talk fairly loudly for the party calling to hear you well. Decent enough though...
b. The upgrade I will make this weekend is to use the 'dual' pocketpctechs adaptor. This one accepts the soundfeeder on one side, plus a regular 2.5mm heasdset on the other. This one disables the internal xda mic, and allows you to use the mic from the headset. So I plan to permantly position this mic (after cutting off the ear bud!) on the door pillar as in normal car hands free installs. This should improve the outbound sound a good bit....
Will let you know how I get on
Regards
Chris
In the end, the Parrot CK3100 car kit has its own built in voice recognition, so I have no worries
Great! I looked at the Parrot a while back. How much was it? Work ok?
Regards
Chris
Well, I've not really had chance to test it properly yet, seems to be good. Cost me £180 to have it fitted, the old one removed and a bit of extra power wired in for my GPS & PDA.
Hi Andy
Sounds good. Let us know how it works out for you. I am interested in how the bluetooth connection holds up. I am still having problems with my xda maintaining a connection with my bluetooth headset.
Regards
chris
hi,
bought a Carcomm i-mate PDA2K Handsfree DSP Car Kit from Expansys:
http://www.expansys.com/product.asp?code=122685
Had it professionally fitted at the weekend and the problem is that whenever there is audio out, the stereo gets muted for about ten seconds. So, during a normal Tom Tom experience with multiple turns and speed camera warnings, this basically renders the stereo useless.
Is there a way to change the amount of time the stereo is muted for?
Many many thanks
FB.
Anyone....?
Did the installer use the mute cable as supplied or did they use any sort of 'intelligent' mute system such as from Elan?
Hi, thanks for the reply.
no other kit was involved, I just gave them this:
http://www.expansys.com/product.asp?code=122685
and they fittted it -- any ideas on how I can get around it? Whats this intelligent mute you speak of?
Cheers
I am pretty new to Android and still trying to get all the grips on I need. As of now, there is one thing that really bugs me badly.
I use the device for Sat-Nav driving a lot, I have a semipermanent installetion in my car from my previous smartphones. Basically just a power feed and a 3,5mm Jack that come out of the dash panel where the device holder is mounted. I recharge plug in for recharge as needed. The audio jack goes into the device, from there to a so-called Fastmute box behind the dash which is connected to the stereo head unit (the loudspeaker output cables running away from the head unit to be specific. The Speaker lines are interrupted by the box and just pass through whatever audio is being played back by the stereo. However, once there is current on the 3,5 audio jack (i.e. speech from the SatNav) the music immediately goes mute and you can hear the turn instructions in perfect quality through the car speakers. Once the signal fromthe satnav dies down stereo music comes back.
For my taste this beats most commercial, fixed systems.
Now, since I am on Android weird stuff happens.
On a first testrun shortly after I gut the Desire (which was o2 branded stock 2.1 at that point) I noticed that I do not get any announcements through the fastmute. Checked the jack, opened the dash to check internal wiring, retried a mp3 player. It's all good on that side. The accouncements come through the device speaker, hard to hear, easy to miss a turn etc. I do not why or how, but it seems that the audio routing takes a route different from other audio. This had me pretty much meh!
Well few days later, now with a ModaCo R8 custom ROM and Froyo I was hoping for good luck and gave it another whirl. Of course, no dice. When I plug in the jack of the supplied headset (which I assume doubles as a handsfree) I get the symbol for that in the upper symbol bar. When I exchange that headset jack with the regular 3,5mm jack the symbol looks different, but still vaguel like a set of speakers.
But now here comes the completion of the mindfaq... I had the SatNav volume at about medium (so barely hearble with driving ambient noise) when the phone went and I took the call through the Bluetooth Handsfree instaalled in my car and was distracted by the call (the car came euipped with the BT Handsfree from factory, so the stereo goes to "pause" and the conversation is routed into the vehicle speakers.. A few minutes into the call I suddenly hear a perfectly well understandable, clear turn instruction hopping into the phone conservation. I was extremely intrigued and was hoping that I discovered that CoPilot can route instructions either into A2DP or more likely emulate a "call event" that results in routing the audio into the according BT profile.
However, after that singularity I tried reproducing this for a god part of an hour, driving a route that forces many instructions from the SatNav, all the while calling my own answering machine fo have an connection established.
Sorry for the lengty explanation. Questions:
1 Has anyone ran into this before? What was your solution? Bear with it, switch SatNav software, avoid listening to music in oder to not miss any turn directions?
2. Is there a hack, hidden configuration that would enable me to _force_ this audio routint into the direction of the BT Handsfree, making it think it is an incoming call?
As a fellow co-pilot user I share your frustration.
You will probably find that it's nothing as technical as it not routing to bluetooth or whatever.
Co-pilot has a nasty habit of messing with it's own volume setting when a headset is plugged in. It tends to reduce itself down to zero without notification or cause. You would try to reset the volume, but firstly, it wont go more than a third of the way up, and secondly, it will simply jump back down to zero again on it's own.
They know about this issue and their response is not to use it with a headphone jack!
It is rather annoying!!
OK, first post here, but I think it's a useful one!!
Collected a Galaxy S2 on Monday night from the 3 store in the Trafford Centre. Absolutely love it!, fantastic handset.
Or so I thought until last night.....
This was the only bugbear/issue that the phone gave me and gave me no end of grief; I paired it with my Parrot 9200 Car Kit, as with any other phone. All seemed to be well.
That was until I tried to make a call. When I pressed the green button on the handsfree to initiate voice dialling, android launched the "Voice Commands" program, which tried to take over. Unfortunately, the voice commands program required a little bit of interaction with the phone, and wasn't particularly accurate over bluetooth.
Tried deleting and re-pairing, turning off voice commands over bluetooth, which just bypassed the hands free mic, to the handset!!. Grief grief grief.
OK, I thought, I'll just manually select the numbers on the car kit. A bit of a ballache, but it'll do!
Wrong, the phonebook hadn't downloaded, and no amount of tweaking the car kit or the phone could sort it.
There was very limited info on this, hence the reason for this post!
After much googling, I found that the latest version of the Parrot firmware had an additional pairing setting; "Force AT Sync".
So, car kit updated with the latest firmware from the Parrot website, on the car kit, I navigated to Settings>Bluetooth Settings> Pair With> Force AT Sync. (This is at the bottom of the list of phones that the kit "knows" about by default.
Seconds later, my phone was requesting permission for the car kit to access the phone book, and syncing away nicely.
No more voice commands software, and the Parrot kit is working as it should, completely hands free!
Cheers
Tim
Thanks for the info on this. I'm thinking about getting the same kit, can I ask what the sound quality is like through Bluetooth?
Update:
I've just had an MKi9200 fitted. Only had a couple of hours to play with it but so far I'm delighted.
Feel free to ask questions.
pjfriend said:
Update:
I've just had an MKi9200 fitted. Only had a couple of hours to play with it but so far I'm delighted.
Feel free to ask questions.
Click to expand...
Click to collapse
Does it work?
Yep, works really well.
Phone calls are very clear for both parties and (to me at least) the bluetooth music sound quality is really good. It's not a top of the line speaker system but it's clear and the volume is adequate.
It cuts in with the sat nav directions nicely. I had a bluetooth headunit before and if I had the phone connected the directions wouldn't interrupt a cd or radio. This works just fine, even if I'm listening to the radio through the stereo, the directions still come through.
I've not tried using the other sound connections yet, iPod, USB stick, aux jack or SD Card. I'll try them all over the next couple of days.
I'm thinking about taking the SD card out of the phone and using that way as it only lets you move the tracks foreward and backwards on a playlist or album if you use bluetooth. You have to use the phone to select another artist or album etc. Also, an SD card would let you see the album art and display the track details on the Parrot screen.
The only thing that isn't working correctly at present is that the remote won't skip tracks if the music player isn't displayed on the phone. If I have the sat nav screen up the track forward and backward keys are ignored.
I'm just going out to update the software though so this might fix that.
Anything else you need to know?
Right, I've updated the software which was really painless.
The sat nav stopping the track controls from working only happens in Co Pilot, not in Google Navigation.
I tried using my SD card from my phone in holder and it didn't seem to pick it up. I might need to leave it in longer (about 28 gig of music on it) or it might be that the card is too large at 32GB. The Parrot website says that there is no limit to card size but that sounds a bit optimistic to me.
Other than that though, I'm delighted so far.
I've got one of these too. Great bit of kit. I did notice a tweak in the VillainRom thread that ups the Bluetooth audio quality, if that's how you're using it. Haven't tried it yet myself.
One thing I have noticed is it's a bit hit and miss when play and pause work. I could never get into the car and press play, and just have it resume the last thing that was playing (usually BeyondPod). In the end I set Tasker up to automatically start playing when Bluetooth connects. Job done.
Sent from my GT-I9100 using XDA Premium App
dan13l said:
I've got one of these too. Great bit of kit. I did notice a tweak in the VillainRom thread that ups the Bluetooth audio quality, if that's how you're using it. Haven't tried it yet myself.
One thing I have noticed is it's a bit hit and miss when play and pause work. I could never get into the car and press play, and just have it resume the last thing that was playing (usually BeyondPod). In the end I set Tasker up to automatically start playing when Bluetooth connects. Job done.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Could you post a link to that thread? I have a Mki9200 myself and would be very interested to read this.
Sent from my GT-I9100 using Tapatalk
Have a look for a post by Faremoney on May 16th in the VillainRom thread over in the dev forum. It's to do with altering the Bluetooth bitpool. I'd link, but I don't think I can from the app.
Sent from my GT-I9100 using XDA Premium App
dan13l said:
Have a look for a post by Faremoney on May 16th in the VillainRom thread over in the dev forum. It's to do with altering the Bluetooth bitpool. I'd link, but I don't think I can from the app.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Thanks, I'll go searching for it.
Sent from my GT-I9100 using Tapatalk
The only annoyance I have now, which is more parrot related is that if I have a usb memory key and sd card connected, even if i had been.listening to music on the sd card, next time I get in the car and press play, it defaults back to the usb.
All in all, the kit is impressive. I bought mine about 18 months ago and gave nearly £300 fitted. A couple of months ago, I bought a kit for my girlfriend, brand new for £110 and fitted it myself in 40 mins!!
Definitely recommended.
Sent from my GT-I9100 using XDA App
Thanks for this post. It helped me to sync my contact from sgs2 to my parrot 9100.
It works very nice now!
Galaxy SII and Parrot MKi9100
Thanks for the fix - I was getting close to returning the unit - spent an hour or more listening to 'Voice Prompts'! Stick loaded with update and ready to go
Cheers
david
Ordered a second hand unit off ebay for 65 and getting it fitted late this week/early next week.
Has anyone figured out a way to charge the s2 from the iphone connector?
Hi there
Hope all ok with yours. I've been delighted with mine so far.
It does charge off the USB connector, don't need to use the iPhone end. It seems to deliver quite a small charge though so I still use a cigarette lighter socket.
From memory you can set the phone to storage mode and the Parrot kit will read the music contents of the phone but I had trouble with a larger capacity card. I'm happy with the audio quality over Bluetooth so this was the simplest way for me to work.
Let me know if that doesn't make sense or if you have any other questions.
Paul
Working but could be better...
Hi,
I have updated my MKi9200 Parrot software and set the "Force AT Sync". Effectively I don't have the phone voice commands anymore and it is already much better. Thank you for this.
However, I experience some interruptions of sound each time I use the phone (like just checking my mail) or each time an event occurs on the phone (like reception of an email notice or reception of SMS notice). It is not comfortable when listening to music...
Also, I had a much better experience with my Parrot and another phone than SG2. With SG2 + Parrot, sometimes you press the green button on Parrot and you don't get the voice command to dial, sometimes you have a phone ring and you can't take the call when pushing the green button on Parrot, sometimes you can't hang up after a call, sometimes it only works after several attempts of push on a given button.
Well, it is better than before but still not working as it should. Of course, when the Parrot buttons are not responding, I can still get the command right using the phone screen to take the call or hang-up but it is really not safe at all while ones drives his car in the same time...
Has anyone here found a solution first not to get those cuts on phone events?
Has anyone found a better setting to make sure the Parrot buttons are always working with SG2?
Has anyone experienced the same kind of troubles despite the "Force AT Sync" mode is set like on my SG2?
Thank you for sharing.
Thanks for confirming. much appreciated.
pjfriend said:
Hi there
Hope all ok with yours. I've been delighted with mine so far.
It does charge off the USB connector, don't need to use the iPhone end. It seems to deliver quite a small charge though so I still use a cigarette lighter socket.
From memory you can set the phone to storage mode and the Parrot kit will read the music contents of the phone but I had trouble with a larger capacity card. I'm happy with the audio quality over Bluetooth so this was the simplest way for me to work.
Let me know if that doesn't make sense or if you have any other questions.
Paul
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
I can't find how to get latest firmware from the parrot website
Your post was interesting but for the life of me I can't work out where to get a newer version of firmware! I have just put in the unit and was dismayed when I called Samsung and was told that I can't put my contacts in it! It seems that you have so I'd love to know where and how you got the firmware you refer to.
You can get it from here http://www.parrot.com/uk/support/downloads
Hi guys, just registered. I have a Samsung Galaxy S2 (with 2.3.5 KI3) and a Parrot LS-3400GPS carkit. It pairs without problems but of course it is a bit limited so I would like to change it with a Parrot MKi9200. I'm reading in many places there are a lot of issues with Android phones. I also wrote di Parrot and they do CONFIRM. But the problem (they say) is not in the carkit sw but in the Android! So strange...
On the parrot forum there are still users with mic issues, contact sync issues and voice command issues, even with the last 1.96 fw.
I've read here that everything works fine using "force at sync".
I understood that it does sync but what about the voice commands? Any problems?
Is there a conflict with the parrot ones?
I'm really confused
Thank You
Hi all
Bought the above BT unit for my car and plant vehicles yesterday and thought I'd give you the heads-up on how it's going. I needed something that easily transfers between vehicles, so didn't want a wired solution.
Well, in a nutshell it's perfect for my use. The unit downloaded my phone book (792 contacts in 11 groups) in a matter of 15 seconds. I first paired with my Sg2 after a little bit of fiddling, I had to hold down the red and green buttons together first - nowhere in the supplied or online manuals does it say to do that first but, there ya go.
In use.....
1. Audio is extremely clear, although scrolling through the contact names with the centre dial is laborious and the robo-voice is pretty bad, but then again the voice dialling works great so there's really no need to use the scrolling method at all. For instance, I press the green button, the unit says " Who would you like to call", I say " Jane mobile" and voila, it dials instantly and extremely quickly. No errors.
2. Likewise with pickup of calls. The phone rings followed by the unit. I say "answer" and boom. Incidentally, if the caller is in your phonebook the unit says the name of the caller. Also, if you update your phone's contact list at any time, the Parrot automatically updates it's contact list to match the phone at the next time you turn on the Parrot and pair with your phone. Brilliant.
3. Using satnav ( CoPilot Live and a couple of others) the audio is sent out throught the Parrot automatically. The phone has priority over the satnav, naurally.
4. Using the music player, the audio also comes out through the Parrot. Not a great sound but good enough for most purposes, especially if you're listening to something like Tune In Radio. So if your listening, for example, to Tune In whilst running satnav at the same time, the radio dims for guidance audio then comes back up, and if the phone rings whilst your listening to the radio and using satnav, then they both dim until you finish your call.
Excellent stuff all round I reckon. By the way, I'm nothing to do with Parrot, but I think praise where praise is due.....
Using KL1 Frankenstein with stock kernel, courtesy of Intratech. Thanks bud. You ARE the man.
Greetings from sunny ( but darn wet and windy right now) Cornwall.
Regards
Phil