hi,
bought a Carcomm i-mate PDA2K Handsfree DSP Car Kit from Expansys:
http://www.expansys.com/product.asp?code=122685
Had it professionally fitted at the weekend and the problem is that whenever there is audio out, the stereo gets muted for about ten seconds. So, during a normal Tom Tom experience with multiple turns and speed camera warnings, this basically renders the stereo useless.
Is there a way to change the amount of time the stereo is muted for?
Many many thanks
FB.
Anyone....?
Did the installer use the mute cable as supplied or did they use any sort of 'intelligent' mute system such as from Elan?
Hi, thanks for the reply.
no other kit was involved, I just gave them this:
http://www.expansys.com/product.asp?code=122685
and they fittted it -- any ideas on how I can get around it? Whats this intelligent mute you speak of?
Cheers
Related
I am looking for some feedback on the various in car bluetooth kits that are available in the marketplace, ie the fully installed kits rather than the in ear jobbies.
I have a Pioneer head unit that offers bluetooth headset features however due to a design fault it is fecking useless, ie the mobile phone can't be within a metre of the head unit unless you are prepared for the caller to put up with terrible interference.
Admittedly for a normal phone this would be of a lesser issue as there is the facility to store numbers on the headset, but as I use a XDA Exec with TomTom, I need the pda where I can see it
I have used an in ear device in the past, but it is bloody annoying.
I have looked at the various Parrot kits, the 3000, 3100 and 3200 all of which would do the job, but I don't know how they fair in reality.
I have used a Nokia bluetooth kit, IIRC CK1W or was it CK 7W that appeared to be a litle flaky when trying to connect to the exec.
Whilst browsing eBay, I have come across these http://cgi.ebay.co.uk/SIEMENS-BLUET...6QQihZ008QQcategoryZ42419QQrdZ1QQcmdZViewItem ,http://cgi.ebay.co.uk/BLUETOOTH-HAN...7QQihZ009QQcategoryZ80085QQrdZ1QQcmdZViewItem http://cgi.ebay.co.uk/MOTOROLA-BLUE...3QQihZ018QQcategoryZ35190QQrdZ1QQcmdZViewItem
So does anyone use any of the above and does anyone have any recommendations?
Cheers and Happy New Year
I have been using a Sony head unit with handsfree, A2DV and AVRCP. Its been pretty good and I have no problems recommending it.
dsen said:
I have been using a Sony head unit with handsfree, A2DV and AVRCP. Its been pretty good and I have no problems recommending it.
Click to expand...
Click to collapse
Would that be the MEX-BT5000? I'm considering getting it for use with my Wizard.
Yes, thats the one.
http://www.sony.com.au/xplod/catalog/product.jsp?categoryId=22000
Hi all,
Seems the most appropriate place to post this.
I recently upgraded my headunit to the Sony MEX-BT5000. It plays CD's, MP3 CD disks, has a good tuner and and AUX in. It also supports bluetooth profiles A2DP, AVRCP, Hands-Free (HFP) and Object Push Profile (OPP - for contacts) and as is supports A2DP and AVRCP (basicically A2DP but the remote control features) you can also play music from your MP3 player, phone or whatever through the stereo. It works fine with my M3100.
The handsfree calling is good and pauses the music when in call but there are bad points which I've not managed to solve yet such as inability to initiate voice dialing from the unit, the call button brings up a Sony phone menu. It also can only store 50 contacts and doesn't automatically sync with the M3100 like my Parrot CK3100 would. This means you need to decide which 50 you want to have on there. You can assign 6 speed dials to the 6 preset buttons on the front.
The sound from this stereo is far better than my previous Sony MP3 stereo and on this alone I would recommend it to anyone. It also comes with an infrared remote which allows you to digit dial, andswer and hang-up etc alongside all the basic stereo functions.
Hope this might help someone looking to buy something similar.
http://www.sony.co.uk/view/ShowProd...n_GB&pageType=Overview&category=ICA+CD+Tuners
Gavin.
I've had the BT5000 since January, and use it with my Wizard. Its BT performance is the best I've ever seen -- it's the best speakerphone I've ever used.
Sony also has a new MEX-BT2500 unit that's about half the price of the 5000, with all the same BT functionality plus an aux jack on the front panel.
Parrot
I am using Parrot, both the ck3100 without the LCD and with the LCD, and since upgrading to Radio 1.15/1.18 have had no issues switching between them and my Jabra X10 BT Headset.
I am using this
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=230142025172&ssPageName=STRK:MEWA:VRI
Works good for me...
Laubscherc said:
I am using Parrot, both the ck3100 without the LCD and with the LCD, and since upgrading to Radio 1.15/1.18 have had no issues switching between them and my Jabra X10 BT Headset.
Click to expand...
Click to collapse
When I experimented with a friend's Parrot unit I discovered that it didn't retrieve the contacts from my Exec, and I couldn't do voice-dialling with it. It worked OK as a hands-free speakerphone but that's about it.
Was your experience better than this? If so, is this because you upgraded your Universal's radio stack?
SiliconS said:
When I experimented with a friend's Parrot unit I discovered that it didn't retrieve the contacts from my Exec, and I couldn't do voice-dialling with it. It worked OK as a hands-free speakerphone but that's about it.
Was your experience better than this? If so, is this because you upgraded your Universal's radio stack?
Click to expand...
Click to collapse
Sorry for the late reply.
Check the Firmware version on the Parrot. You can download the BT updater from their site, and use it to upgrade the firmware of the BT Car Kit. I had the same issue, but after upgrading to the new FW, the issue was fixed.
I have this car radio too.
Works like a champ on my iMate JasJar.
Bluetooth stereo headset on htc s620?
Does anybody have expirience with a stereo bluetooth headset on de HTC S620 or Dash? and is this possible? And wich headset is a good one?
Fortunately, the Dash has bluetooth 2.0, so you'll be able to try the newer headsets/headphones as they come out. Sony has a set of 2.0 headsets that I tried as they had the earbud style I prefer (they stay in). The sound quality was a big disappointment though, not approaching that of wired headphones. The range was great though. Tried to watch video with them, but the audio was out of sync. Wound up returning them.
These look worth trying: http://mobilitytoday.com/news/007355/Jabra_BT8010_CES
Whatever you decide to try out, make sure the place you get them has a return policy.
Thanks for your reply.
i think i will keep it by mine wired headset
My dash was setup for poor audio on the stereo bluetooth. After much searching, i found out i had to delete the keys in the registry for it to work. Once i did that, audio quality improved ten times.
More on that here. I appear to not be the only one with the issue. If your getting poor audio quality with the stereo bluetooth, give it a shot.
I just got the itech clip headset which takes nomal earbud headphones not the headphones take look dorky when you wear them. A2DP AVCRP, works perfectly. No problems with audio quality. Handling of phone calls back to windows media player is fine Microsoft voice comand works fine as well. I have the o2 Germany ROM installed.
bluetooth headset profile question
everytime i connect my bluetooth headset or my wired handsfree headset my profile automatically changes to "headset" and i cannot change it to any other profile while the headset is connected
is there any way to change your profile while a headset is connected? or is there a registry edit that will do the job?
thanks in advance
Bluetooth loudness
Hi,
I am using the Dash flashed to the S620 original ROMs, on the US T-Mobile network.
Everything is fine, but the call volume on with my bluetooth headset seems low.
(I tried a Motorla hs500 and a samsung wep200)
Is there maybe a registry hack to increase the bluetooth volume?
Cheers,
Bela
I know what your talking about and I hate it. Only way to change the profile is to turn off your BT Headset.
I would like to have 2 headset profiles so i can have a silent one and that isnt silent.
bluetooth a2dp registry settings
So... following a thread here, I deleted everything in regards to those keys and I'm getting random dropouts whilst listening to music over my Motorola HT820 headphones. Is there anyway someone can send me their backup settings or tell me the settings so I can put them back in? Am I just forced to do a clean install of the WM6 Beta rom? I know, I'm stupid for not backing up, but they said it worked well... :-( Thanks!
HKLM\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings
thats where the key values were deleted...
can someone give me their values so i can reprogram it in?! thanks!
BitPool 30
MaxSupportedBitPool 30
UseJointStereo 1
all of them dwords
bluetooth file exploring
is there any application or software that i can use to look at and copy files that are on other devices through bluetooth?
i used to have a samsung phone and i was able to do this, because my co workers and i always need files that are on eachothers phones and its just easier to go and get the file yourself then to have to ask them to beam me the files
any input would be helpful
T-mobile Dash and Bluetooth Stereo headphones
Has anyone tried using the A2DP functionality with bluetooth headphones to get stereo music? In particular I'm considering the I-tech S38 with my T-mobile Dash.
Thanks in advance!
My understanding is that certain headphones work better than others. Dishe over at HoFo tried the I-tech Clip r-35 with hs SDA and (I think) a Dash and wasn't happy with the results. I've used my cheapo Logitech BT headphones with my Dash and had very good results. Because of this I'd make sure whereve ryou get them has a liberal return policy.
Thanks for the update!
I followed up by searching the threads at Hofo and read a number of reviews outlining a bunch of issues with I-tech clips. Apparently, the plantropics headsets are much better.
cheers
My brother has a plantronics 590 I think it is. It sounded really good on my MDA, but that was before I had my dash.
None of them that I have tried (and I've tried a lot) sound nearly as good as a wired set of headphones. Definitely follow the poster's advice who recommended purchasing from someone with a return policy. I did, and returned them all -- an online store with a good selection and a good return policy: http://www.mobilecityonline.com
Bluetooth problem on SPV E600
Hi guys,
Anyone got that after installing HTC rom "RUU_Excalibur_HTC_WWE_1.11.405.4_4.1.13.28_02.63.90_Ship"?
I can't get the bluetooth to start.
Any help would be greatly appreciated
Bart
Same with t-mobile wm6 beta
Heya,
for a long time i have been looking for some decent bluetooth stereo headset.
now it has come down to two models. well, actually one only
my choice: motorola s9
and the second possibility: Motorola T820
from reading the comments on amazon on those devices i realize that my phone needs to be A2DP compatible to get the best sound out of the headset.
i use s2p as music player and i know it is A2DP compatible... but is real question is: is my phone (HTC P3300 WM6) compatible with this tecnology
also: if you can suggest any other good headsets, please do so.
key features i seek:
- able to use on my phone and pc
- a2dp
- good sound and microphone quality
a2dp not working
Hi,
I have HTC artemis. I recently purchased wireless bluetooth stereo headsets (Jabra bt325)
I cannot connect it to use as wireless stereo. Its working fine as handsfree. After pairing, I cannot see wireless stereo option. Its Greyed. I know that artemis is A2DP compatible.
But i am sure that headset is fine because I tested it with n95 and it worked fine.
Please give me a solution.
Try this:
Start - settings - connections - bluetooth - and add new device
If your headset is already added, use your stylus and press on the bluetooth headset name until the following menu comes up:
Edit
Delete
Set as Hands-free
Set as Wireless Stereo
Choose no. 4
yes it is.
I'm using Dopod M700 which is the P3300 w/o the GPS module.
It works with dell BH200 BT stereo headset and also the o2 BT stereo earphones.
It works on joint stereo in WM5 and since its now running WM6.1 its real stereo.
Dell BH200
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
sameerbs said:
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
Click to expand...
Click to collapse
might be a specific problem of your headset model.
i use a motorola s9 and it's quite nice. fits nice, does not disturb after hours, controls work fine, calling works fine...
BUT (and there's always a but) it has some major drawbacks i found out. while it's still nice to listen music without wires, i encounter this problems. which MIGHT be due the phone, not the headset... but i have no way to test that.
so, basicly, P3300 + motorola S9 through A2DP:
- insides works like a charm. phone in my belt, headset on. music cuality nice with some small music interrupts every now and then (maybe once per 5 minutes). phone calls nice and i can hear and they can listen me well.
but my oh my when i get on the street...
- constant music interrupts every 15 seconds. i have hang the phone around my neck so it's where my chest is to not get interrupts so often (still get one every 2-3 minutes)
- as the mic is where the ear is, if i have a call, it's impossible to hear me due the background noise. this also applies to the underground/metro. it's not that bad in a bus
and well. without A2DP enabled my music player uses so little resources the phone still works fine...
if A2DP is enabled, the phone gets REAL slow and the battery drain is MASSIVE.
when this motorola S9 break... i'll get another model to test. and when that breaks i'll probably get back to some nice wired ones (unless the CPU issues and the battery drain on the phone gets solved) ... but maybe i actually change the phone before that happens. who knows.
I am pretty new to Android and still trying to get all the grips on I need. As of now, there is one thing that really bugs me badly.
I use the device for Sat-Nav driving a lot, I have a semipermanent installetion in my car from my previous smartphones. Basically just a power feed and a 3,5mm Jack that come out of the dash panel where the device holder is mounted. I recharge plug in for recharge as needed. The audio jack goes into the device, from there to a so-called Fastmute box behind the dash which is connected to the stereo head unit (the loudspeaker output cables running away from the head unit to be specific. The Speaker lines are interrupted by the box and just pass through whatever audio is being played back by the stereo. However, once there is current on the 3,5 audio jack (i.e. speech from the SatNav) the music immediately goes mute and you can hear the turn instructions in perfect quality through the car speakers. Once the signal fromthe satnav dies down stereo music comes back.
For my taste this beats most commercial, fixed systems.
Now, since I am on Android weird stuff happens.
On a first testrun shortly after I gut the Desire (which was o2 branded stock 2.1 at that point) I noticed that I do not get any announcements through the fastmute. Checked the jack, opened the dash to check internal wiring, retried a mp3 player. It's all good on that side. The accouncements come through the device speaker, hard to hear, easy to miss a turn etc. I do not why or how, but it seems that the audio routing takes a route different from other audio. This had me pretty much meh!
Well few days later, now with a ModaCo R8 custom ROM and Froyo I was hoping for good luck and gave it another whirl. Of course, no dice. When I plug in the jack of the supplied headset (which I assume doubles as a handsfree) I get the symbol for that in the upper symbol bar. When I exchange that headset jack with the regular 3,5mm jack the symbol looks different, but still vaguel like a set of speakers.
But now here comes the completion of the mindfaq... I had the SatNav volume at about medium (so barely hearble with driving ambient noise) when the phone went and I took the call through the Bluetooth Handsfree instaalled in my car and was distracted by the call (the car came euipped with the BT Handsfree from factory, so the stereo goes to "pause" and the conversation is routed into the vehicle speakers.. A few minutes into the call I suddenly hear a perfectly well understandable, clear turn instruction hopping into the phone conservation. I was extremely intrigued and was hoping that I discovered that CoPilot can route instructions either into A2DP or more likely emulate a "call event" that results in routing the audio into the according BT profile.
However, after that singularity I tried reproducing this for a god part of an hour, driving a route that forces many instructions from the SatNav, all the while calling my own answering machine fo have an connection established.
Sorry for the lengty explanation. Questions:
1 Has anyone ran into this before? What was your solution? Bear with it, switch SatNav software, avoid listening to music in oder to not miss any turn directions?
2. Is there a hack, hidden configuration that would enable me to _force_ this audio routint into the direction of the BT Handsfree, making it think it is an incoming call?
As a fellow co-pilot user I share your frustration.
You will probably find that it's nothing as technical as it not routing to bluetooth or whatever.
Co-pilot has a nasty habit of messing with it's own volume setting when a headset is plugged in. It tends to reduce itself down to zero without notification or cause. You would try to reset the volume, but firstly, it wont go more than a third of the way up, and secondly, it will simply jump back down to zero again on it's own.
They know about this issue and their response is not to use it with a headphone jack!
It is rather annoying!!
Hi everyone. I ask you for help because I am a GOLF 5 owner with an Eonon GA5153F installed (which should be an MCTB) originally with Android 4.4.4 which I then brought to version 5.1 with a rom
The problem he has always had is related to the audio quality in calls. Until I used it, I used the hands-free phone and that's it, but now that my wife uses it, I prefer to be careful while driving and therefore call and do everything via the car radio. The problem is that the audio I get is really HORRIBLE. Practically whoever is on the other side of the phone hears nothing, hears 1 word every 5 and at a very low volume (I've already gone to the factory settings and turned up the bluetooth but nothing changes).
I've read that many of these Chinese have made hardware changes, removing the capacitor and resistor on the bluetooth module or similar, but I can't find anything about my car radio. Have any of you done this? Does anyone of you have photos, videos or something that tells me on mine which component I have to desolder, which track to open, or what to do?
Please because the quality that this car radio has on call is really a shameful thing!
Thanks a lot to everyone
P.S. Currently I have connected (in the back of the car stereo) an external microphone (the one that was inside the car stereo package)