I measured that here. I hope that that correct is.
EDIT:
New attach file updated!
... nice job
PavelR.
nice!
Could you also determine the values of the capacitors?
FANTASTIC, just sitting here wondering about the pinout - perfect timing!
Merry Xmas
Hello !!
thank you ...
please, you know what is the purpose of this circuit ?? only volume & micro ?
thank you.
david.c said:
Hello !!
thank you ...
please, you know what is the purpose of this circuit ?? only volume & micro ?
thank you.
Click to expand...
Click to collapse
With the schematic, one could make an adapter that will allow charging the device and at the same time listening to fm radio or mp3s with or without a headset
Thank's ...
I'll try to do it ... but ... maybe I can conect directly to pint 1 on the headset .....
zerimar said:
With the schematic, one could make an adapter that will allow charging the device and at the same time listening to fm radio or mp3s with or without a headset
Click to expand...
Click to collapse
Or, charge the Pocket PC whilst having the SatNav audio from TTNAV come out of your car speakers using the car stereo's (auto-faded) external SatNav input...
Hi,
thanks for the layout!!
Does anyone know where to buy the 11-pin mini-usb plug?
cheers
tom
Hi,
search for mini usb at: www.digi-key.com (or .de); www.segor.de
Kind regards,
hqqh
hqqh said:
Hi,
search for mini usb at: www.digi-key.com (or .de); www.segor.de
Kind regards,
hqqh
Click to expand...
Click to collapse
Sorry,
can't find any 11pole plugs there
Wher I can get the ext-mini usb? I d'ont have original headphones, but maybe I can use this scheme and make it myself..
So I tried this yesterday without success...anybody tell me where I went wrong...oh btw I am NOT an audio / electrical engineer so I may have made basic mistake.
I took original headset cable and cut off earbuds. Purchase 3.5mm female stereo line socket. Opened silver case and identified green was R+ and red L+.
Connected red to silver bayonet on line socket and green to copper. Connected LG & RG to main bar on socket.
Then connected radio transmitted to line socket...got absolutely no sound.
Any ideas?
Is my cabling correct?
Eoin
Try with this:
http://forum.xda-developers.com/showthread.php?t=284446
Hi,
Just seen ur circuit diagram. Really Good
Is this for an external circuit(to make ur own speaker/mic/chrager), or is it the internal circuit of the phone?
I'm after the internal circuit diagram of the microphone/usb circuit with component values as I knocked off a component whilst cleaning it(water damage) & now have no microphone unless I use the headset. DOH!
Any ideas
Cheers
has anyone actually built this circuit?
How can you if you dont know the values of the caps and resistors?
Stal-Ker said:
I measured that here. I hope that that correct is.
Click to expand...
Click to collapse
thank you very much
hi.
i want charging Diagram of the O2 Orbit(ARTEMIS 200)
Batter connector
actually i have unfortunatelly connected 12 volt to charge the set.
now when i plug charger into set,
set displays charger for only abt 5 seconds
and after it didnt display charging and also didnt charge.
muskangul said:
hi.
i want charging Diagram of the O2 Orbit(ARTEMIS 200)
Batter connector
actually i have unfortunatelly connected 12 volt to charge the set.
now when i plug charger into set,
set displays charger for only abt 5 seconds
and after it didnt display charging and also didnt charge.
Click to expand...
Click to collapse
I could be wrong but I think you are going to have problems: 1) getting the diagram you need and 2) fixing that phone!
12 volts would definitely do damage ... if it is anything like my Hermes it only handles 5. 12 may have burned out components .. components you may not be able to verify as operational just by visual inspection, and that may require expensive tools to diagnose , let alone repair.
If I were you , I would get my info off the phone while it still works, sell it for parts , and get yourself a new one.
But in any case, I wish you all the luck in the world!
elysion said:
nice!
Could you also determine the values of the capacitors?
Click to expand...
Click to collapse
Any pointers arround value of capicitors ?
Hi
Is it possible to tweak the Tp2 so I can listen to the radio without the need for a usb-cable?
It is possible but don't know how. However if you flash an Energy ROM he has already carried out the tweak and it will work without the cable, however you will need to be very close to a radio station to get it as the cable is the aerial and without it there is no aerial.
cheers
Barney
there is a registry setting in state for plugged in head phones. you wont get any signal at all without headphones. i have an adapter that cost $0.01 i got off amazon, it sets the state unlock the stock htc adapter and it provides half signal (for being only 3") but thats good enough for radio.
Okay, thanks for replys.
Curious about adapter
The Jack of Clubs said:
there is a registry setting in state for plugged in head phones. you wont get any signal at all without headphones. i have an adapter that cost $0.01 i got off amazon, it sets the state unlock the stock htc adapter and it provides half signal (for being only 3") but thats good enough for radio.
Click to expand...
Click to collapse
Would you mind posting a link to this adapter or telling us what it is called?
Thanks in advance!
i would if i could but i cant seem to find it anymore. its disappeared from my purchase history.
I want to buy mhl cable for my note, the thing is, I'm not familiar with this technology at all, seen a few videos where mhl won't work unless its plugged into a power source, which might be an inconvenience as it requires u to carry the charger.
How is the image quality on the screen? 1080?
Anyone with good experience can tell me a way around this, more into less wires carried around?
and a good mhl cable link to buy from, cos there r thousands out there...
Sorry for such question but this is my first Samsung device (coming from desire HD)
Cheers.
Sent from my GT-N7000 using xda premium
I've yet to receive my Note but coming from a GSII I can answer a few things.
Unfortunately, yes you will need to have a power cable plugged into the MHL adapter, and I don't believe there is any workaround.
The effective resolution on the TV will be mirrored from the phone's native resolution. So a phone that is 480x800 will only mirror that resolution throughout the OS. Only when playing HD content will the phone put out 720/1080(p/i) effective resolution.
The great thing with the Note is that because the native res. is already 1280x800, that will be the res displayed on the TV which will be great for web browsing as that's about an average laptop res.
Any MHL adapter should do. I bought a cheap one from expansys and it works without a hitch. Just read any comments on the product to see if previous buyers said it doesn't work on a recent device.
I bought genuine Samsung from Amazon.com:
http://www.amazon.com/gp/product/B005LGUDKK/ref=oh_o00_s00_i00_details
It arrived as advertised and works great!
thank you for the feedback , i bought http://www.amazon.co.uk/gp/product/B0060Z8CYK from amazon uk , it has a discount on it for the time being.
will report once i get it.
cheers
Goodm7sn said:
thank you for the feedback , i bought http://www.amazon.co.uk/gp/product/B0060Z8CYK from amazon uk , it has a discount on it for the time being.
will report once i get it.
cheers
Click to expand...
Click to collapse
I bought a non Samsung one on ebay and am having problems. The connection keeps breaking down and re establishing (the video on the phone continues). I've tried 3 chargers and 2 cables. The MHL adapter gets warm also. I was looking into getting a genuine version from Samsung and looked at Amazon (UK). 1 reviewer had doubts about the authenticity of the device he received, fearing it to be a counterfeit.
4braid said:
I bought a non Samsung one on ebay and am having problems. The connection keeps breaking down and re establishing (the video on the phone continues).
Click to expand...
Click to collapse
I had this issue a couple times on my GSII and I found that using SetCPU to lock the clock speed up to 1GHz+ [depending] helped and basically removed the issue, so give that a try and see if it did anything.
charging through HDMI
isnt the HDMI TV port supposed to charge the device , or provide enough power for the adaptor to work ?
not all models can provide power through HDMI but some newr ones can i suppose ? i read that somewhere so long ago but i cant find it anymore to link as a reference , though im not quite 100% sure of that , ,may be it me saying non-sense ??
cheers
DarkShot666 said:
I've yet to receive my Note but coming from a GSII I can answer a few things.
Unfortunately, yes you will need to have a power cable plugged into the MHL adapter, and I don't believe there is any workaround.
The effective resolution on the TV will be mirrored from the phone's native resolution. So a phone that is 480x800 will only mirror that resolution throughout the OS. Only when playing HD content will the phone put out 720/1080(p/i) effective resolution.
The great thing with the Note is that because the native res. is already 1280x800, that will be the res displayed on the TV which will be great for web browsing as that's about an average laptop res.
Any MHL adapter should do. I bought a cheap one from expansys and it works without a hitch. Just read any comments on the product to see if previous buyers said it doesn't work on a recent device.
Click to expand...
Click to collapse
DarkShot666 said:
I had this issue a couple times on my GSII and I found that using SetCPU to lock the clock speed up to 1GHz+ [depending] helped and basically removed the issue, so give that a try and see if it did anything.
Click to expand...
Click to collapse
Thanks for the advice. Have just installed setCPU with minimum speed of 1000 but still getting disconnections. Am not sure, however, how to use setCPU so the min CPU speed might not have been saved.
Goodm7sn said:
isnt the HDMI TV port supposed to charge the device , or provide enough power for the adaptor to work ?
not all models can provide power through HDMI but some newr ones can i suppose ? i read that somewhere so long ago but i cant find it anymore to link as a reference , though im not quite 100% sure of that , ,may be it me saying non-sense ??
cheers
Click to expand...
Click to collapse
From what I recall, TVs that support MHL will provide the adapter with power so the power cable can be used to charge the phone while plugged into the adapter. I might however, not be 100% correct.
4braid said:
Thanks for the advice. Have just installed setCPU with minimum speed of 1000 but still getting disconnections. Am not sure, however, how to use setCPU so the min CPU speed might not have been saved.
Click to expand...
Click to collapse
Odd. Have you tried to set SetCPU to performance with the top clock speed at 1.4GHz or higher? That could potentially help.
Cheers.
Sent from my GT-I9100 using XDA App
Odd. Have you tried to set SetCPU to performance with the top clock speed at 1.4GHz or higher? That could potentially help.
Cheers.
Click to expand...
Click to collapse
Will give it a try, thanks.
4braid said:
I bought a non Samsung one on ebay and am having problems. The connection keeps breaking down and re establishing (the video on the phone continues). I've tried 3 chargers and 2 cables. The MHL adapter gets warm also. I was looking into getting a genuine version from Samsung and looked at Amazon (UK). 1 reviewer had doubts about the authenticity of the device he received, fearing it to be a counterfeit.
Click to expand...
Click to collapse
Hi there !
I've got the same problem than you, 4braid. Connect/disconnect every 1 or 2 minutes while playing a movie. Perhaps is it a software problem ? I use MX Video Player. What is yours ?
Samsung told me that SGS 2 cables were ok and, more than this, that every MHL cable should work. So, do we need to buy a Samsung cable to test ??
manu_katz said:
Hi there !
I've got the same problem than you, 4braid. Connect/disconnect every 1 or 2 minutes while playing a movie. Perhaps is it a software problem ? I use MX Video Player. What is yours ?
Samsung told me that SGS 2 cables were ok and, more than this, that every MHL cable should work. So, do we need to buy a Samsung cable to test ??
Click to expand...
Click to collapse
Hi, I am using the default player but I don't think it's the problem as the video continues to play on the phone when the TV cuts out. Also, I've tried playing Asphalt HD through the TV and the same thing happens.
I'm gonna try another better HDMI cable and another app, just tu know if it's better. Perhaps will I have to try also with the branded Samsung MHL cable ?
I bought a non-samsung aswell.
Tried it and it works flawlessly on my LG plasma.
Tried several apps and sources.
Hi,
I think I got a clue !
In fact, it's not so easy to explain but I'm gonna try...
I have put my new HDMI cable between my Galaxy Note and my HD tv. I have watched a new movie with the same video player (MX video player) and I notice great results : no disconnections ! I was very excited and tried the movie that I was watching last time with problerms. And, then, no problems this time ! So happy again !
But that's not finished. Listen...
At a moment, it cuts ! And 4 seconds later my phone rings. I answear and watch my movie again. A few minutes later, a new cut ! And 4 seconds later, my phone rings a second time. I don't answear and the movie goes on. 15 seconds later, my movie stops again and my phone ring to show me that I have a message.
It seems that the phone network is not transparent in that case. More, that not only the fact that phone calls stop the MHL transfer (like the camera application do) because, otherwise, the signal should have stopped at the moment of the phone rings and not 4 seconds before. These 4 seconds are the time, for the phone, to switch between Wifi network to 3G network ! And, that's a fact, I was connected with Wifi during time where my MHL connection worked.
I'm not sure of being clear in my explanations but, if you ever put your phone near a amplified device, there's a symptomatic noise every x seconds or minutes when the phone look for a signal on the phone network (something like bzzz bzzz bzzz). Well, I think that each time that event arrives, the MHL link is "broken" for a little time.
To be sure, I tried somethig else : I have disconnected Wifi and used only 3G network and my disconnections returned back frequently ! I have reconnected my phone to Wifi and I have no disconnections problems again !!
So strange, isn't it ??
Perhaps the distance between my phone and my tv plays too ? It seems that a good quality HDMI cable is a good thing too.
Well, 4braid, could you try to use Wifi a short moment (or even cut the phone network by puting your phone in airplane mode) to test and tell me the result ?
manu_katz said:
Hi,
I think I got a clue !
In fact, it's not so easy to explain but I'm gonna try...
I have put my new HDMI cable between my Galaxy Note and my HD tv. I have watched a new movie with the same video player (MX video player) and I notice great results : no disconnections ! I was very excited and tried the movie that I was watching last time with problerms. And, then, no problems this time ! So happy again !
But that's not finished. Listen...
At a moment, it cuts ! And 4 seconds later my phone rings. I answear and watch my movie again. A few minutes later, a new cut ! And 4 seconds later, my phone rings a second time. I don't answear and the movie goes on. 15 seconds later, my movie stops again and my phone ring to show me that I have a message.
It seems that the phone network is not transparent in that case. More, that not only the fact that phone calls stop the MHL transfer (like the camera application do) because, otherwise, the signal should have stopped at the moment of the phone rings and not 4 seconds before. These 4 seconds are the time, for the phone, to switch between Wifi network to 3G network ! And, that's a fact, I was connected with Wifi during time where my MHL connection worked.
I'm not sure of being clear in my explanations but, if you ever put your phone near a amplified device, there's a symptomatic noise every x seconds or minutes when the phone look for a signal on the phone network (something like bzzz bzzz bzzz). Well, I think that each time that event arrives, the MHL link is "broken" for a little time.
To be sure, I tried somethig else : I have disconnected Wifi and used only 3G network and my disconnections returned back frequently ! I have reconnected my phone to Wifi and I have no disconnections problems again !!
So strange, isn't it ??
Perhaps the distance between my phone and my tv plays too ? It seems that a good quality HDMI cable is a good thing too.
Well, 4braid, could you try to use Wifi a short moment (or even cut the phone network by puting your phone in airplane mode) to test and tell me the result ?
Click to expand...
Click to collapse
Hi manu_katz,
You are a true genius!!!
Switched to flight mode and played a video with no problems (even tried a game).
Cancelled flight mode and signal to TV lost in less than a minute (video continued on phone). After picture returned to TV I called the phone from my landline and as soon as I pressed the last digit of the telephone number the signal was lost and 4 seconds later the phone rang. Also happened when I sent SMS to myself. I suppose this will happen every time the device "phones home". Many thanks for your info. you have saved my from buying a genuine Samsung MHL adaptor.
Great to hear I was right !
Me too, I have seen a movie entirely, yesterday night !
As I said, perhaps is there ways to correct the problem without need of cutting 3G network (like the fact to use a branded cable or the distance between phone and tv) but for now we find the way to use our f*** not branded cable ! Lol !!
Are you able to see the srt subtitles on the tv screen with the mhl cable? I can only see them on the phone screen but not on the tv.
paris.gr said:
Are you able to see the srt subtitles on the tv screen with the mhl cable? I can only see them on the phone screen but not on the tv.
Click to expand...
Click to collapse
I've encountered that issue too. It's a shame unfortunately, but the only way I've found to get them to work is to use software decoding. It's a downer, but it does work.
I've got a strange problem with my third party cable (similar to this one: http://www.lunashops.co.uk/goods-935.html). It seems like the output is cropped on the top and bottom (so the notification screen and dock are cut off). I've already tried all the aspect ratio settings on both of my TVs (1 HD Ready and 1 Full HD), so that isn't it. Has anyone else experienced this before?