I have read on wiki that "You can not lock it once you've unlocked and resized it cause the resizing tool resets the Extended_ROM password."
Is there any fix for this ?
Hi
As far as I know, there isn't.
You still can HIDE extrom though... and it's enough to rest easy
Related
I use this tool without an expected goal, I use another one (PPCW.net Extended_ROM_viewer) with same effect andfinally I did changes in registry manually, but still without effect. Where should be the problem?
ROM 1.72.00WWE
Radio: 1.17.00
Protocol:1337.28
ExtROM: 1.72.901
What do you expect and what do you get?
Can you be more specific about what isn't working?
Mark
to: markutah
Described applications has clear functionality: to show Extended_ROM directory (lock, unlock too, of course). I want copy .cab files to pc and cook my own ms_.nbf.
So after aplying these tools nothing happens, no directory shows in root of my XDAII. Why? Can you help me with this mess?
Did you soft reset your device after applying the unlock tool?
If not then do a soft reset. If yes then do the following to read the content of your extended rom:
Go in the registry to
HKLM\system\StorageManager\Profiles\TRUEFFS_DOC
Change the key MountFlags to 0 (= zero)
Soft reset your XDA II/QTEK2020 etc
In the file explorer a directory Extended_ROM will show up. Now you will be able to copy the content of your extended rom.
Note that your extended rom is not unlocked so you will not be able to write something to the extended rom. As you've stated you're going to flash your rom then this will not be problem I assume.
Mark
to markutah
you didn´t read ny first post carefully - i did it already hudret times manually or with tools, but nothing happens. No directory shows. I´m not rookie user, but now i´m on the end with my power and nerves.
I used copyying rom through bootloader and usb terminal to sd card, but format of data is not readable for Windows PC....see http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=62&PN=1
Sorry that my attempt to help you works on your nervers and sorry that I was trying to help you.
mark
to: markutah
today seems my mood better, (because i found somthing about that problem) so sorry about my reaction, for a little apology i´m writting what i find out:
so i had ROM version 1.60WWE as original one with Radio 1.12, devide with CDL oerator. I was upgrading ROM many times (ROM, ExtROM, Radio together and separatelly too), but new ROMs was still from CDL operator. Last time I upgraded ROM to 1.72WWE, Radio 1.17 from TMobile, and I couldn´t do any change in registry with sucsess. My registry data stand changed, but nothing happens. (for example: i tryied to show Orange logo in Phone to substitute title ORANGE (in right up corner) withouth sucsess, and that ist far easier operation that this we are talked before (see http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=80&PN=1 - you are orangeman too, so change yours logo , when you don´t have it yet.)
finally i have no idea how to fix it (without downgrading ROM) and i´m not 100% sure if this is the point of problem, but i gues. bye
I would like to unlock the Extended ROM in my MDA2 directly using the XDA_Developers_Unlocker.cab. After installation of this file i've tried to unlock that,but my device wrote me this message:
debug
FL_IOCTL_BDTL_HW_PRO
TECTION - A device
attached to the system is
not functioning.
Then if i go out to the Today screen, i see the message that the ExtROM is unlocked. But it is still not. Has any1 any ideas to solve this problem please?
TomasNM said:
I would like to unlock the Extended ROM in my MDA2 directly using the XDA_Developers_Unlocker.cab. After installation of this file i've tried to unlock that,but my device wrote me this message:
debug
FL_IOCTL_BDTL_HW_PRO
TECTION - A device
attached to the system is
not functioning.
Then if i go out to the Today screen, i see the message that the ExtROM is unlocked. But it is still not. Has any1 any ideas to solve this problem please?
Click to expand...
Click to collapse
I got the same error too when I ran the unlocked cab on verizon wireless's version on the blue angel. But I was able to get into the Extended_ROM however
Me too
I am also able to get into the Ext.ROM,but i can't modify anything inside. Ideas yet?
Me too
I am also able to get into the Ext.ROM,but i can't modify anything inside. Ideas yet?
me too,my device is daxian CU928, china's CDMA device,pls help!
this is my procedure
oke guys this is my step for unlocking extrom:
1. run the unhide - ok
2. run the unlock - ok
3. softreset
just do it that's step, now you can make your extrom
I don't think so. Doesn't help. :/
Hi there,
I don't know what went wrong, but this is what happened:
1. I had a Crossbow ROM running, one with the ExtROM unhidden and unlocked by default, calling it "Storage".
2. I was testing things out and reflashed Windows Mobile 5.0 (original shipped AKU2 WWE Qtek)
3. Testing was done and I reflashed the Crossbow ROM (Midget's 0.1 Vanilla).
The ExtROM (called "Storage") is still there, but it somehow seems locked.
I have access to the ExtROM, can delete, place, rename, files etc., but after a soft reset the original state has returned and all of my files/modifications are gone.
How can this be while the Crossbow ROM had it unlocked by default before? Can the ExtROM unlocking operate by itself, independent from the CE ROM?
If this all is the matter, how can I unlock the ExtROM again?
I tried a few "ExtROM Unlock" cabs already, but these only create another entrance called "Storage 2" and it stays locked somehow....
Thanks a ton!!
Hi there,
I don't know what went wrong, but this is what happened:
1. I had a Crossbow ROM running, one with the ExtROM unhidden and unlocked by default, calling it "Storage".
2. I was testing things out and reflashed Windows Mobile 5.0 (original shipped AKU2 WWE Qtek)
3. Testing was done and I reflashed the Crossbow ROM (Midget's 0.1 Vanilla).
The ExtROM (called "Storage") is still there, but it somehow seems locked.
I have access to the ExtROM, can delete, place, rename, files etc., but after a soft reset the original state has returned and all of my files/modifications are gone.
How can this be while the Crossbow ROM had it unlocked by default before? Can the ExtROM unlocking operate by itself, independent from the CE ROM?
If this all is the matter, how can I unlock the ExtROM again?
I tried a few "ExtROM Unlock" cabs already, but these only create another entrance called "Storage 2" and it stays locked somehow....
Thanks a ton!!
Check Jwright's WM6 thread, there's a solution in there
I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!
brick?
hello,
First you must open the bootloader menu,
hold voice dial button and press soft reset.
If this not working hold voice dial and on/off button and softreset.
You must connect first your htc with your pc and the start the bootloader.
When you are in the bootloader menu, you can upload an orginal fabricrom to your htc.
Search xda-developer for the fabric rom.
And then you can change your rom for something else but don't forget the uspl.
When you want to change image you must install the uspl first otherwise everthing will blocked
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
uspl does not work. this is the point you can not get it.
have a problem but I cannot find anything useful for my case, maybe you can help me?
pvdhelm said:
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
Click to expand...
Click to collapse
Hi Patrick,
I have a dutch rom on my htc P3300
IPL: 1.12.0001
SPL: 1.12.0000
GSM: 02.67.90
os: 1.12.0.0
my HTC remains stuck on the startup screen (logo HTC) and will not get any further.
Connection with active synch is not possible, ans holding the buttons reset-voice rec-on/off buttons don't react. WM cannot be started in that way.
is it possible to find a boot program which allows me to start up WM again like a regular PC? something like a emergency startup disk? I have a 2GB micro SD card. After reading and trying so many things, I lost the way in this site and was hoping maybe you can send me some useful links that can solve my problem? I would appriciate the effort.I don't know if it's allowed to send my personal emailadress? If it is allowed please let me know. Maybe we can exchange directly some info, otherwise I don't have a problem mailing this site.
(I hope I can find this thread again after closing?)
Kind regards , Eli
my artemis is also in the same state
Hi All,
Please help me with problem which I am facing with my HTC P3300
When i switch it on..Its stuck in the state where it shows
IPL 3.07.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.4.0.0
What I tried.
1. I tried USPL , its not loading as device is not getting detected in my laptop.
2. Volume Down+Reset is not working
Please help me with this