Related
I upgraded...so I thought to this version...
Rom Version 4.01.16 eng
Rom Date 02/04/01
Radio Version 4.21.00
Protocol version 32s54 now I cant get into bootloader, cant use the phone, or internet on my SX-56...nor can I boot by flashing....What Have I done wrong should I just use it as a paper weight? Remeber If I press the power button and soft reset to just goes back to the Tmobile screen an continue to boot as a normal Alt-Ctrl-delete. I have tried xdairt and himayla..cant get it to work...
someone plz guide me through this I want my pda!!!!
Try the option fix-bootloader from the XDATools.
Then you should be able to enter the bootloader, and reflash your device...
HTH
Stefan
after XDA1 ugrade to 4.01.16 not able to do up/downgrade !
Have upgraded my XDA1 to ROM-version 4.01.16 Eng.
Now I wanted to install a different version, but I failed.
The PDA is working so far, but I can't upgrade/downgrade anymore.
When I use OSImageTool, there is a connection error displayed in the black command window:
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connection type.
Can somebody please help me ?
Re: after XDA1 ugrade to 4.01.16 not able to do up/downgrade
Stefan_PDA said:
Have upgraded my XDA1 to ROM-version 4.01.16 Eng.
Now I wanted to install a different version, but I failed.
The PDA is working so far, but I can't upgrade/downgrade anymore.
When I use OSImageTool, there is a connection error displayed in the black command window:
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connection type.
Can somebody please help me ?
Click to expand...
Click to collapse
There are many postings concerning this problem.....
You have to flash via SD-Card....
HTH
Stefan
Cant get into bootloader via pressing pwr botton and soft reset. I've have also hard reset the device and i still get nothing
Have you tried the fix-bootloader option from the xda-Tools?
Stefan
yes...but all i get is tthe command prompt...and i click yes is there something else i must do...tried edit2003 but still nothing
Cannot execute
Cannot execute "C:\DOCUME~1\Ovynten\LOCALS~1\Temp\Rar$EX00.203\RSUpgrade.exe"
wHAT THE [email protected]#$ DOES THIS MEANS? If uI could only understand this maybe I could get mt PDA working again.
I'm running Vista and when I wanted to run the bootloader upgrade on my Dash I kept getting this message error. Error 260. anybody find any way around it? I've tried to manually set th ephone into bootloader mode, same result. help!! PS the error is supposed to mean "port already open" or "open port error" I'd really appreciate any help!
erro 260 - fixed
switches to my wife's laptop that had XP on and it worked like a charm. I'd be glad to assist anybody in the process od de-branding their Dash. Removing the ugly T-mobile paint logo on the unit was easy too.
ERROR 260
Sorry for thislong story....
OK, I've been on looking around the site for a while. I installed the WM6 Beta. I was looking for two days for the WM5 ROM only because I want the little things to work. Finally found it. But now every time I try to flash my phone ack to WM5 bI keep getting the 260 connection error. The readme only says to restart the comp and phone and try again. I have literally, no joke, done this 12 times in the last 2 hours, hoping maybe it will go. All the phone does is go to the green, blue, and red screen and stays there. Then the comp says it gets the error. I know it's connected because Sync Center syncs, I can look through the phone, install apps from my comp, etc. Also I tried doing the 'Update only' rom for version 1.11 or so, and it starts to go but then says its the wrong version RUU. Has anyone had this problem before? Flashing to WM6 did this once and then worked after.
I'm running Vista Premium, stock sync cable, Microsoft Sync Center for vista. All this is the sameas when I flashed to WM6.
There goes another 3 attempts, trying to change timing, reinstalling Sync Center, etc.
Decided to try it on my XP desktop, and for some reason, first time it worked. Maybe Vista didn't like it? Who knows..
Mladito Vista!!
Hi there,
I have the same little problem here!!!! I have a laptop with Vista (garbage)... so i´ll try on a laptop running XP...thank you for posting this, it was a big help..i let you know how it turns out... see you around
WM5 to WM6 --> Problems at 3%
Hi all,
I've errors upgrading my phone to WM6.
I Can open the Wizard (it`s a generic to S620/S621), but in 3% i`ve an error.
I think thats my phone has a blocked CID.
How can i unlock this? i`ve tryed with tools to unlock, but without success...
Regards,
Emerson
Hello,
Welcome to the forum.
Your problem is that your phone is CID-Locked. Hence, you'd need to use a paid service to unlock it. I personally used the following service which provides instant unlocking:
http://www.gsmliberty.net/shop/htc-excalibur-instant-remote-unlock-p-1452.html
I used a credit card, it's 39.99 $ - I was done unlocking and upgrading to Windows Mobile 6 in about 15-20 minutes.
Good Luck !
P.S:
Steps to install WM6
- First CID/SIM Unlock using GSM Liberty
- Flash Bootloader
- Install WM6 ROM (It will take some time for it to load so give it about 5-10 mins. it does get stuck at the boot screen for sometime but eventually it'll load)
- Install Office/Audio Manager
- Application Unlock your phone using SDA Application Unlocker
- Install the necessary software/tweak/hacks
there you go, if you have any questions, feel free to ask. also, if you use the search function, everything's available here.
Good Luck !
Here's the following links you require
1) Flash Bootloader
ftp://xda:[email protected]
2)here's the WM6 ROM:
http://files-upload.com/files/472108....90_Ship.ex e
here's office for those who want it:
http://rapidshare.com/files/31706137/Office.WM6.zip
here's Htc Audio Manager for those who want it:
http://forum.xda-developers.com/atta...1&d=1183909664
Ps. I better like German flash, it's smaller due to fewer language packs, and contains English, here: http://files-upload.com/files/472422....90_Ship.exe
thanks to jsp_m for the links.
Hi,
I`ve problems because my IMEI is from Brazil...
And in the site accept only 15 digits IMEI..
My imei is: 35*************02 (17 Digits IMEI)
Thanks,
Emerson
hey,
that's not a problem. everyone has 17 digits, don't include the last 2 digits when you type in your IMEI so for example
11111111111111102
just include the first 15 and submit and you'll get an unlock link in your e-mail, follow that link, scroll down to the page to download dashunlock software and download the .UNL file for your IMEI and then make sure ur phone is connected to active sync and it's green, open the dash-unlock program and then hit enter then it'll ask for the .UNL file, locate it and open it and your good to go - your phone will be unlocked then soft reset it or i think it's automatic and everything's set.
good luck !
p.s: in other words, don't include 02 when you type in your IMEI.
HTC Audio Manager
http://forum.xda-developers.com/showpost.php?p=1355010&postcount=5
Thanks!
I'll Try NOW and let all know...
Regards,
Emerson
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
tatarezende said:
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
Click to expand...
Click to collapse
Emerson;
Read the second post from luckybandit on this thread. That´s exactly what to do to get rid of the "invalid model" issue. Download the bootloader, flash the phone, flash the new ROM and be patient.
My excalibur is also from South America, and worked OK. If you have any doubt just let it know to this thread.
Boa sorte!
Hi,
I`ve problems with the link of Boot loader....
Anyone can send the full URL?
Thanks,
Regards,
Emerson
Hello,
I'm sorry about the links not working, here - i've attached the bootloader for you. here's what you do
1) Run bootloader (attached file)
2) Run the WM6 WWE ROM
3) Run SDA Application Unlock
4) Install Office/Microsoft Voice Command/HTC Audio Manager
5) Install Tweaks/Hacks
here's a site that has some applications and tweaks:
http://mobile.surrealnetworks.com/DashApps.htm
and search this forum, there's tons of information, hacks - etc.
Good Luck !
oh by the way, did you unlock your phone properly?
1) Download unlock software
2) Download .UNL file specifically for your IMEI
3) Connect phone to computer and make sure the activesync's icon has turned green
4) Run unlock software
5) When unlock software asks for .UNL file, browse for it, choose it
6) That's it ! It should say Unlocking done and it'll reboot
Your phone is now Sim & Cid Unlocked. If you have more questions, feel free to ask. just do what i said first then post.
Good Luck ! Hope to see everything working for u...
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
tatarezende said:
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
Click to expand...
Click to collapse
Hi,
Are you using Windows Xp? Cause I've gotten that error a couple of times too but it was in Vista. Try Xp if you're using Vista.
Hi!!
DONE with XP.... but now i`m affraid!! The "Green Screen" with nem OS apparently locked... this is normal? at least 3/4 minutos in the same screen.. both "patches" are applyed sucefully....
Is there anything else to do now?
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
LiquidSky said:
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
Click to expand...
Click to collapse
so u r able to unlock the sim or not?
cruzzmz said:
so u r able to unlock the sim or not?
Click to expand...
Click to collapse
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
LiquidSky said:
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
Click to expand...
Click to collapse
try the hard SPL thread ... there is a program to unlock the phone
cruzzmz said:
try the hard SPL thread ... there is a program to unlock the phone
Click to expand...
Click to collapse
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
LiquidSky said:
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
Click to expand...
Click to collapse
Error 270 ... U must do HardSPL first ... Pls follow instruction on the Hard SPL thread
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
Have u tried tis tool?
http://forum.xda-developers.com/attachment.php?attachmentid=91644&d=1213100403
what's the end of the story ?
these japanese guys just gone with the wind.
Maybe it's work, because I just did a test on my x02ht. I’m able to modify register through CeRegEditor after SDA_ApplicationUnlock.
Need help to Flash X02HT from JAPAN
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
I have the same problem. I would appreciate if someone knows how to solve it.
Thanks!
Totalelectronics said:
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
Click to expand...
Click to collapse
yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
TESTED and working.......
good ..................................................
As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).
The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .
You can download my ROMs, they come with the full package
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?
Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP
Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.
strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?
Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.
From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )
Lol I can't belive I forgot to tell you that!
It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?
Thank you, here you go!
sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!
nevermind, it worked ok on the second attempt!
The tool can hack the bootloader password from many devices e.g.:
HTC Blueangel
HTC Universal
HTC Himalaya
HTC Magician
HTC Harrier
HTC Alpine
and some more...
and with hacked password you can download or upload data from the device...
within the tool there is a little terminal like mtty...
So please test and give feedback...
Later this tool will be used to upload the new Linux kernel/bootloader for Android...
!!! WARNING !!!
If you don't know what you are exactly doing, you can brick your device!!!
FAQ:
- What is special on Vista/Win 7 32/64 bit!?
DOWNLOAD
VIEW CHANGELOG
05-02-2013
- Webupdate for Partitions
04-02-2013
- auto update function
02-02-2013
- gui like Windows 8
- add backup/restore function
- full Windows XP compatible
12-01-2013
- add Himalaya BL 1.01 (B-44)
02-11-2012
- add Magician partitions
- fix problem with partition bigger as 32MB
- more logging
- speed up upload e.g. 32MB from 10 to 4 min...
31-10-2012
- add logging mode
29-10-2012
- add Himalaya password for BL 1.03 (B-44)
- use timout and alternate commands for device name and bootloader...
reserve...
Another great work from you, d-two
I don't have Windows at the moment, so I can't test it, but I'm sure there aren't any serious bugs...
And just out of curiosity: What programming language did you use to make this?
Bootloader 2.07?
Can't open XML-File "devices".
Don't have a BA at hand, will come to play this afternoon.
O.K.-
WinXP, BA WM6.5.5Multilang, Bootloader v2.07
First forgot to disable USB-Connection in ActiveSync,
then connected properly.
Bootloader unlocked.
Flash/Download displayed like pic#2 in post#1.
tbc.
B-44 said:
Bootloader 2.07?
Can't open XML-File "devices".
Don't have a BA at hand, will come to play this afternoon.
Click to expand...
Click to collapse
What have you do?
have you extract the zip and start the exe or have you start it from zip file?
PS: Yes, my blueangel has the bootloader version 2.07...
you can use the Hima or Harrier too
miki100 said:
Another great work from you, d-two
I don't have Windows at the moment, so I can't test it, but I'm sure there aren't any serious bugs...
And just out of curiosity: What programming language did you use to make this?
Click to expand...
Click to collapse
I have use VB.Net...
d-two said:
What have you do?
have you extract the zip and start the exe or have you start it from zip file?
PS: Yes, my blueangel has the bootloader version 2.07...
you can use the Hima or Harrier too
Click to expand...
Click to collapse
What i've done?
Downloaded your file, copied it into a new folder & unzipped it.
Started exe and after connecting i can open "devices" in flash/download.
(I first was curious and tried to open it directly via right-click/open which didn't work.)
My Hima also likes your tool:fingers-crossed:
(Downloaded Himas bootloader just for testing.)
N:cyclops::cyclops:B question: is it also possible to upload .nbh files?
B-44 said:
What i've done?
Downloaded your file, copied it into a new folder & unzipped it.
Started exe and after connecting i can open "devices" in flash/download.
(I first was curious and tried to open it directly via right-click/open which didn't work.)
My Hima also likes your tool:fingers-crossed:
(Downloaded Himas bootloader just for testing.)
N:cyclops::cyclops:B question: is it also possible to upload .nbh files?
Click to expand...
Click to collapse
Nice idea i think i can add .nbh/.nbf support...
d-two said:
Nice idea i think i can add .nbh/.nbf support...
Click to expand...
Click to collapse
...as it unlocks bootloader...
edit 29.10.2012: here i was wrong.
As D-Two wrote: it unlocks BL-Password
and not BL itself, sorry.
nice tool
B-44 said:
...as it unlocks bootloader...
Click to expand...
Click to collapse
the bootloader is already unlocked but the nbf/nbh files need to be decoded ...
d-two said:
the bootloader is already unlocked but the nbf/nbh files need to be decoded ...
Click to expand...
Click to collapse
For the bootloader i'm impatiently waiting for a Hima i bought some days ago which hasn't yet experienced any one of your or other updates or unlocks... will first test your tool before doing anything else.
Just arrived- MDA2, supposed to be broken, but it is just the battery which is down to zero, so the phone doesn't start charging. Replaced.
Radio1.18.00 BL v1.03
Download mode, started your HTC_Flasher but in second step instead of "checking information of your device ... please wait" just a white bar appears, static.
Software is original T-mobile. Is there anything i can do before i start unlocking and upgrading?
(btw- i first didn't get it right, thought your tool wouldn't only hack BL password, but bootloader itself.)
MTTY Password for BL v1.06 didn't work (naturally?).
B-44 said:
Just arrived- MDA2, supposed to be broken, but it is just the battery which is down to zero, so the phone doesn't start charging. Replaced.
Radio1.18.00 BL v1.03
Download mode, started your HTC_Flasher but in second step instead of "checking information of your device ... please wait" just a white bar appears, static.
Software is original T-mobile. Is there anything i can do before i start unlocking and upgrading?
(btw- i first didn't get it right, thought your tool wouldn't only hack BL password, but bootloader itself.)
MTTY Password for BL v1.06 didn't work (naturally?).
Click to expand...
Click to collapse
OK, you have a Hima with BL 1.03 so we need the password for it!!
Make this:
Download this program
and install it on your pc...
then start it and select the stuff shown on the picture in the menu ...
after that start an update for the hima with the original updater and you can see the password...
Then send it to me...
That's why i asked... often older versions get lost because of people always update to "newest" version. That's why i call 1.2 of my EF82 the lost one- 1.3 has been registered just 16 hrs later, but now everyone updates to it, though it's worse. will take a look at bootloader... Update- which one, T-mobile or can i take Aeroflyluby's?
The bootloader Version will not updated ... never! You can update a wm6.5 Rom Form arofly.
O.K. just wanted to be shure not to spoil it.
edit: checked my BAs... Harriers all have v1.02 (think yours won't be different), one MDA3 v2.05, second one, italian Qtek2020 and Siemens SX66 v2.07
If you need PW of one of those just tell me, and i'll do as with Hima (tomorrow or monday).
d-two said:
The bootloader Version will not updated ... never! You can update a wm6.5 Rom Form arofly.
Click to expand...
Click to collapse
Here you are:
http://www.mediafire.com/file/pcyn08bc2xr2ybg/v1.03.dmswks
USB>password ~F0>~kv~a~~~~000
Pass1.
USB>
B-44 said:
Here you are:
http://www.mediafire.com/file/pcyn08bc2xr2ybg/v1.03.dmswks
USB>password ~F0>~kv~a~~~~000
Pass1.
USB>
Click to expand...
Click to collapse
ok i have add the password in the XML file please test it
thanks for help!!
PS: Blueangel, Universal and the other devices have a dynamic password only the Hima/Harrier use a static password for every bootloader version!
d-two said:
ok i have add the password in the XML file please test it
thanks for help!!
Click to expand...
Click to collapse
Negative- downloaded Flasher, unpacked it, Hima in bootloader mode, started Flasher
again gets hung in white bar
d-two said:
PS: Blueangel, Universal and the other devices have a dynamic password only the Hima/Harrier use a static password for every bootloader version!
Click to expand...
Click to collapse
So i only tell you if i find Hima or Alpine with a bootloader not yet listed.