Develop Bugs

Help A Newbie once A Day with An MDA

Hi All
Have a problem with my latest phone. A so called friend told me to upgarde the ROM so as to remove all the T Mobile poop in it. So he gave me the software I started the upgrade all went well stage 1 then stage 2 and finally stage 3. It said Congrats just hit reset and the power button at the same time and its done. Easy Me thought..... Not Easy....... Its now just booting up and screaming at me. The screen wont lite up and nothing else. I have tries to reset over 10 times now.....Anyone got any ideas, have I shot and killed my new phone...
Ta JG

this is not good. do you know which phone you are having? MDA is all the phoen from t-mobile. First identify your phone. Then, you need to know if you are using the right ROM on the right phone. THEN, you have to know are you using the right phone ROM on the phone (eg G3 or G4).

Its an MDA Copmact 11 does that help....

common.. more info. which rom you've used?

Alpine_Ext-1.11.162_Radio-1.04_stuffstripped_Camera_Fixed.
SORRY i AM NEW TO THIS AND i AINT GOT A CLUE WHAT i AM DOIN...HE HE HE

Oh forgot to mention it all went in ok, stage 1, 2, 3 and even told me on my computer it had worked. It was when I tried the power and reset that it all came tumbling down........

JeanGenie said:
Oh forgot to mention it all went in ok, stage 1, 2, 3 and even told me on my computer it had worked. It was when I tried the power and reset that it all came tumbling down........
Click to expand...
Click to collapse
All I would like to do is get the old stuff back then worry about an upgarde later can this be done without me having to do unspeakable things to the phone????

You've just flashed your Charmer phone with an Alpine ROM. If that doesn't kill your phone, I'm not sure what will.
Ok, try this. Hold down all 3 buttons -> power, camera, record buttons, and poke the reset. See if you can get a 3 colours screen.
If you get that, close active sync (stop the process WCESCOMM.EXE), connect your phone to your PC (when it is displaying the 3 colour screen). Then you ought to be able to run the ROM update file (EXE) from t-mobile (check the Charmer Wiki) and that may fix your problem.

hanmin said:
You've just flashed your Charmer phone with an Alpine ROM. If that doesn't kill your phone, I'm not sure what will.
Ok, try this. Hold down all 3 buttons -> power, camera, record buttons, and poke the reset. See if you can get a 3 colours screen.
If you get that, close active sync (stop the process WCESCOMM.EXE), connect your phone to your PC (when it is displaying the 3 colour screen). Then you ought to be able to run the ROM update file (EXE) from t-mobile (check the Charmer Wiki) and that may fix your problem.
Click to expand...
Click to collapse
I have done what you have said, I think...DUHHHH the screen has not lit up but its now showing USB in the top and V1.02 in th ebottem. I have connected it to my computer but active sync has not cut in yet....... I assume I have done it wrong....

hey
you DONT want activesync to cut in
put it in that 'usb mode' that you managed to get and just run the OFFICIAL T-Mobile rom update utility, but make sure to kill the wcesscomm process in windows' task manager.
good luck!

duke_stix said:
hey
you DONT want activesync to cut in
put it in that 'usb mode' that you managed to get and just run the OFFICIAL T-Mobile rom update utility, but make sure to kill the wcesscomm process in windows' task manager.
good luck!
Click to expand...
Click to collapse
I have just downloaded the t-mobile update as below
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
I have switched off the file as you have said in the task manager. The update laods then says cannot find MDA Device connection error 274.
Could a system restart help?????
Sorry for all this, maybe stick to things I do know in the future, like washing my car.......

hey
get your phone back into that screen which had 'usb' written on it.
then do this:
download and install a program called 'winrar', you've probably heard of it and in all likelihood already have it!
once its installed, right click that t-mobile update you just download and select the 'extract to.../' option that will come up in the drop down menu, let it extract to the folder it does, open the folder in there will be a few files: you want the file which is called something along the lines of 'upgrateUT' or RUU Upgrade UT, it'll be an exe,
connect your phone up to the computer (with it in the USB mode and activesync disabled) and run that exe, it should go through as normal
good luck
(if you want any help just post back! best bet is for you to extract the files and report back with the name of the files in the folder!)

duke: I think he did that. He downloaded the EXE from http://www.tm-phonedownloads.com/download_manager_mda_com2.html
and it seems not able to detect his Charmer.
JeanGenie: Just to make sure, when you run that EXE, you have the phone connected with it displaying USB?

duke_stix said:
hey
get your phone back into that screen which had 'usb' written on it.
then do this:
download and install a program called 'winrar', you've probably heard of it and in all likelihood already have it!
once its installed, right click that t-mobile update you just download and select the 'extract to.../' option that will come up in the drop down menu, let it extract to the folder it does, open the folder in there will be a few files: you want the file which is called something along the lines of 'upgrateUT' or RUU Upgrade UT, it'll be an exe,
connect your phone up to the computer (with it in the USB mode and activesync disabled) and run that exe, it should go through as normal
good luck
(if you want any help just post back! best bet is for you to extract the files and report back with the name of the files in the folder!)
Click to expand...
Click to collapse
okie dokie...have extracted all th efiles and these are what I have got in a seperate folder
EnterBootloader
nk.nbf
README
ROMUpdateUtility
RUUGetInfo
RUUResource.dll
Thats all the files inside the folder

is "ROMUpdateUtility" an EXE file? try running that.

hanmin said:
is "ROMUpdateUtility" an EXE file? try running that.
Click to expand...
Click to collapse
I have and after a few seconds it says error 274 cannot find device....!!!!

well, it is amazing that you can go into the bootloader at all. I'm suspecting that the bootloader is not the Chamer bootloader, hence the ROM update EXE is not able to find it. Where did you download the Alpine ROM. Give exact link.
UPDATE: Look at the post here
http://forum.xda-developers.com/showthread.php?t=269329&highlight=
by 'windowsceportal'. He is able to flash the phone with 'Prophet RUU 2.5.2 noID check' with the DLL RUUResource.dll of Charmer RUU. I'm not very certain, but the noIdCheck may able to help.
UPDATE: As according to this post
http://forum.xda-developers.com/showthread.php?t=280128&highlight=
the bootloader mode that you are having is that of an Alpine (Charmer's bootloader mode is a screen with 3 colours). So, probably the updating program doesn't work. However, as an idea, you may want to try getting alpine upgrading EXE files to load Charmer ROM into the phone. It is an idea, not sure how can this be achieved.

hanmin said:
well, it is amazing that you can go into the bootloader at all. I'm suspecting that the bootloader is not the Chamer bootloader, hence the ROM update EXE is not able to find it. Where did you download the Alpine ROM. Give exact link.
UPDATE: Look at the post here
http://forum.xda-developers.com/showthread.php?t=269329&highlight=
by 'windowsceportal'. He is able to flash the phone with 'Prophet RUU 2.5.2 noID check' with the DLL RUUResource.dll of Charmer RUU. I'm not very certain, but the noIdCheck may able to help.
UPDATE: As according to this post
http://forum.xda-developers.com/showthread.php?t=280128&highlight=
the bootloader mode that you are having is that of an Alpine (Charmer's bootloader mode is a screen with 3 colours). So, probably the updating program doesn't work. However, as an idea, you may want to try getting alpine upgrading EXE files to load Charmer ROM into the phone. It is an idea, not sure how can this be achieved.
Click to expand...
Click to collapse
This is the link i used to get the original upgrade
ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar
Does that help any...

JeanGenie said:
This is the link i used to get the original upgrade
ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar
Does that help any...
Click to expand...
Click to collapse
Is there anyway of just deleting the Alpine ROM and reinstalling the correct charmer. I, as you have probably guessed aint got a clue what I am doing never lone saying...he he he
Just a thought.......
Plus my new XDA IIi was delieverd today am I being silly when I say I have been told that I can debrand it with the Alpine rom as listed above, dont want to try anything incase this phone goes belly up also....

Hellllppppp...........
Its me again, can anyone make any other suggestions to my problem please. I have tried in vain to do what has been already suggested but it seems either it wont work or more to the point I have no clue as to what I am doing.

Help me! Up rom Asus P527

I have just bought an Asus P527 with Chinese language, now I want to up rom English. Please show me the way to up rom from Chinese to English. Thank you so much!

Hint
anhvu_175 said:
I have just bought an Asus P527 with Chinese language, now I want to up rom English. Please show me the way to up rom from Chinese to English. Thank you so much!
Click to expand...
Click to collapse
Was able to track this down from the asusmobile.ru site. It´s auto translated from Google but the setBL does the trick apparently. NO GUARANTEES IT WILL WORK, USE AT OWN RISK!
At the Asus site
http://support.asus.com/download/download_item.aspx?product=12&model=P527&SLanguage=en-us
you can find the WWE rom. In first instance, the update on another language was refused. SetBL.exe copied to the device that launched it, the phone ask to connect the sync cable, then choose "Advanced" mode to begin flashing firmware. That's all.
Perhaps you can ask some Russian developers over here like GreatVK or Sorg to confirm this.
PS. I´m thinking about buying this phone too. Can you comment on the use of it?

It's very useful with the keyboard, you can type text message quickly as a Nokia phone. But I really don't like chip Ti-Omap (run slowly). Battery and screen display are very good.

anhvu_175 said:
It's very useful with the keyboard, you can type text message quickly as a Nokia phone. But I really don't like chip Ti-Omap (run slowly). Battery and screen display are very good.
Click to expand...
Click to collapse
Last year I've used a HTC Wizard with the same processor and it was ok, but no speed monster though. The addition of GPS and FM and the formfactor makes the switch worth it.
But, since the phone is not sold over here I have to import one from Italy, which ships with an Italian rom.
Let me know if it works, my Italian is not so good

Jerome! said:
Last year I've used a HTC Wizard with the same processor and it was ok, but no speed monster though. The addition of GPS and FM and the formfactor makes the switch worth it.
But, since the phone is not sold over here I have to import one from Italy, which ships with an Italian rom.
Let me know if it works, my Italian is not so good
Click to expand...
Click to collapse
------------------
Hi, I've found the way to up rom for asus P527, it's the same with P526.
1. Download Official ROM for you are interested in from ASUS web site
2. Backup your device
3. Check the info of the ROM on your device (under settings menù)
you need the following info:
current ROM region code (WWE, RUS, THA, etc)
Extended ROM region code (WWE, RUS, THA, etc)
4. Extract the content of the file you downloaded from ASUS web site to any folder.
5. Edit the file P527.ini file and write there the info you collected at point (3)
in first line you have to write
the current ROM region code of the device (WWE, RUS, THA, etc)
in second line write the name of the Extended ROM region code if the device (WWE, RUS, THA, etc).
7. Run P527FUU.exe and follow the instructions screen.

Hello, Does anyone can help me to Upgrade the rom from Chi to Eng because I can't read Chinese. I try like the above instruction but I can't see the rom version Code. I saw only like this " 4.12.070815.000S.TMC " in my settiing. So I don't know what word to change the P527.ini in both row. Anyone please help me about this problem.
P.S. Can anyone send the link to download the Thailand ROM to me? I'm Thai. I can't see the Thailand ROM in ASUA Thailand. I call to check with the ASUS Thai staff, they said they will not allow the different country device to upgrade to Thailand device even I ask to give the payment.

ROM WM6.1 for Asus P527 THA - Build 19214:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=156434&PN=1&TPN=1
and WM6 - V4.1.23: http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/P527/V4123_WWE_THA_EXT_V106.zip

plzzz help me....
I downloaded official Firmware upgrade for my Asus P527 from Asus.com. But wen i start for the update it says "the extended ROM version of the device does not match" Extended ROM version is: V1.0.0 NA. The update procedure is also showing the same V1.0.0 NA and my phone too... plz help how can i upgrade??? And one thing more this firmware update is windows update basically?? i mean it will go to Windows Mobile 6.1??
thanx in advance

Extract any official ROM with WinRAR
Hold down, Push and Press left OK button then clic reset. View on display "IPL: Insert USB Cable"
On PC run P527FUU.exe click on top left cornel and choise "Expert mode"
Plug USB Cable then click "Update"
sorry for my bad English

After a bad flash (power cut) device is showing:
GSMFFS at 0x13000000
GSMFFS doesn't exist
Spin Forever
Use (Format All) instead
Is there a way to "force" format a rom from windows CMD?
If not what rom tool would i need?
Thanx in advance

Thanks.
anhvu_175 said:
------------------
Hi, I've found the way to up rom for asus P527, it's the same with P526.
1. Download Official ROM for you are interested in from ASUS web site
2. Backup your device
3. Check the info of the ROM on your device (under settings menù)
you need the following info:
current ROM region code (WWE, RUS, THA, etc)
Extended ROM region code (WWE, RUS, THA, etc)
4. Extract the content of the file you downloaded from ASUS web site to any folder.
5. Edit the file P527.ini file and write there the info you collected at point (3)
in first line you have to write
the current ROM region code of the device (WWE, RUS, THA, etc)
in second line write the name of the Extended ROM region code if the device (WWE, RUS, THA, etc).
7. Run P527FUU.exe and follow the instructions screen.
Click to expand...
Click to collapse
Done ! Thanks very much !( Chắc VN nhỉ)

same problem
santosru said:
After a bad flash (power cut) device is showing:
GSMFFS at 0x13000000
GSMFFS doesn't exist
Spin Forever
Use (Format All) instead
Is there a way to "force" format a rom from windows CMD?
If not what rom tool would i need?
Thanx in advance
Click to expand...
Click to collapse
hi santosru,
i am also having same problem were you able to solve it? i saw in one of your other post about pressing volume down ok and reset with lock on sends the boot loader to different mode with options for nand nor flash etc... where you able to select the options?

ppindia said:
hi santosru,
i am also having same problem were you able to solve it? i saw in one of your other post about pressing volume down ok and reset with lock on sends the boot loader to different mode with options for nand nor flash etc... where you able to select the options?
Click to expand...
Click to collapse
Here is what one can do
Put the p527 in bootloader mode and connect to PC
on yr PC open FUU.exe
Click on the upper left corner of the FUU window and select expert mode.
Now start flashing.
Yr p527 will b alive.
I hope this solves the problem

hdubli said:
Here is what one can do
Put the p527 in bootloader mode and connect to PC
on yr PC open FUU.exe
Click on the upper left corner of the FUU window and select expert mode.
Now start flashing.
Yr p527 will b alive.
I hope this solves the problem
Click to expand...
Click to collapse
Thanks hdubli, But I have already tried that it's getting stuck in format stage. Do you have any way of skipping formatting or some other way of formatting(may be in terminal mode, I am not able to goto terminal mode in asus p527 though).
GSMFSS at 0x13000000
GSM Doesn't exist
Spin Forever
Use (format All) instead. --gets stuck after this
Is any body having copy of GSMFSS.NB0 which I can flash

ppindia said:
Thanks hdubli, But I have already tried that it's getting stuck in format stage. Do you have any way of skipping formatting or some other way of formatting(may be in terminal mode, I am not able to goto terminal mode in asus p527 though).
GSMFSS at 0x13000000
GSM Doesn't exist
Spin Forever
Use (format All) instead. --gets stuck after this
Is any body having copy of GSMFSS.NB0 which I can flash
Click to expand...
Click to collapse
I found another mode in p527 by accident. If you press OK (next to volume control) camera and reset with lock keypad it goes into sd card mode with start sd init mode. Can I use this to recover my bricked phone?

santosru said:
After a bad flash (power cut) device is showing:
GSMFFS at 0x13000000
GSMFFS doesn't exist
Spin Forever
Use (Format All) instead
Is there a way to "force" format a rom from windows CMD?
If not what rom tool would i need?
Thanx in advance
Click to expand...
Click to collapse
Hi.I head the same problem and it's solution:
http://rapidshare.com/files/227192658/full.rar (WM 6.5)
1.Unpack and copy this on sd card up to 2GB
2.Put card to phone
3.Lock phone with hold switch,press OK (next to volume control) and camera together and now reset.
I hope this fix your phone.

thanks
kucza said:
Hi.I head the same problem and it's solution:
http://rapidshare.com/files/227192658/full.rar (WM 6.5)
1.Unpack and copy this on sd card up to 2GB
2.Put card to phone
3.Lock phone with hold switch,press OK (next to volume control) and camera together and now reset.
I hope this fix your phone.
Click to expand...
Click to collapse
Thanks Kucza, I had already fixed with steps shown by you and my phone is working fine. Kucza can you tell me as to which version of windows 6.5 are you using ? is this the one cooked by kalpeshmist or the russian or thai rom.

[email protected]#$%^&*()
Jerome! said:
Was able to track this down from the asusmobile.ru site. It´s auto translated from Google but the setBL does the trick apparently. NO GUARANTEES IT WILL WORK, USE AT OWN RISK!
At the Asus site
http://support.asus.com/download/download_item.aspx?product=12&model=P527&SLanguage=en-us
you can find the WWE rom. In first instance, the update on another language was refused. SetBL.exe copied to the device that launched it, the phone ask to connect the sync cable, then choose "Advanced" mode to begin flashing firmware. That's all.
Perhaps you can ask some Russian developers over here like GreatVK or Sorg to confirm this.
PS. I´m thinking about buying this phone too. Can you comment on the use of it?
Click to expand...
Click to collapse
i'm done as u describe that SetBL.exe copied to the device that launched it, the phone ask to connect the sync cable and then no more things happened at this time stopped by IPL:Insert USB CABLE..plz help me
with best reguards

Jerome! said:
Was able to track this down from the asusmobile.ru site. It´s auto translated from Google but the setBL does the trick apparently. NO GUARANTEES IT WILL WORK, USE AT OWN RISK!
At the Asus site
http://support.asus.com/download/download_item.aspx?product=12&model=P527&SLanguage=en-us
you can find the WWE rom. In first instance, the update on another language was refused. SetBL.exe copied to the device that launched it, the phone ask to connect the sync cable, then choose "Advanced" mode to begin flashing firmware. That's all.
Perhaps you can ask some Russian developers over here like GreatVK or Sorg to confirm this.
PS. I´m thinking about buying this phone too. Can you comment on the use of it?
Click to expand...
Click to collapse
plz help me..when i'm updating rom , USB cable disable due to my fault. when i'm power on my phone but it's too no more work..i can't power on and reset my phone, be ruined or not? ..plz drop me a little advice

Ok, this may not work for everyone but it worked for me. I CAN NOT take credit for any of the work. I can how ever offer a very sincere thank you to developers who have brought 6.5 to the P527.
Download SCHIST 21864 from http://forum.xda-developers.com/showthread.php?t=506417
use the P527FUU that is included and check both OS and GSM.
set the OS path to ????/SCHIST_21864_clean\flash.dio.nb0
set the GSM path to ????/SCHIST_21864\EXT GSM(IND)\GSM.dio.nb0
now you need your phone screen to show the IPL: USB Cable message.
turn key lock on, press in on the scroll wheel (left side of phone), press and release the soft reset button with stylus, release the scroll wheel and press the left OK button. it may take a times to get it right but you should get the IPL: screen up. (I actually have to release the scroll wheel then move it down, release and then press the OK button)
insert the usb cable, click the ???? button in P527FUU this should "fix" you.
after it's complete even if phone hangs at the blue Asus screen you can download the correct Asus flash and use the installed included from Asus in advanced mode to restore your phone to WM 6.1 for your area.
if this helps anyone let me know.

O2 Cosmo (Excalibur) ROM Update - How the Hell ?

Hello Experts,
i have read a lot of the Threads here, but i can't find a good information
about my O2 Cosmo. My Dash is Simlook free and SuperCID enabeld.
I found this instructions:
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
Click to expand...
Click to collapse
When i edit the .NBH file, i get a "ERROR 270" message!
When i dont edit the .NBH file, i get a "Invalid Ventor - Error Message"
I try to install this ROM:
"RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.90_Ship.exe"
So my Dash is a German Device, and i want a German ROM, if it is possible!?
OK, i try to go manually in the Bootloader modus, disable ActiveSync for
USB Transfer...and run the RUU Rom...but it allways break down the flash
process at 4% !
...mmh...have i forget any info, that you can help me...i dont know?
Ah Yes...i read in the Thread:
"How to flash a new ROM to your Wizard... a little tutorial!"
Here the link to:http://forum.xda-developers.com/showthread.php?t=298613
But i can see anything on the starting screen, if my dash ist a G3 or G4,
on my start screen ist "ABSOLUTLY - NO - Information" about it!
In the "System Information" i found a RIL Nr. 2.0002 ...
So i think my dash is a IPL/SPL G3...but i dont know it really!
I dont know what i can do anymore, to update my device to WM6.0 or 6.1
Plz, if anyone know what i can do, to fix my problem, plz then tell it to me,
thank you very much, and forgive me about my bad english!

Ok, i test many times this tool "Excalibur USPL- CID BYPASS" ...and yesterday
it works suddenly...i dont know "why" it works, i have done the same, like
every time i try it, but yesterday my dash move to the needed "WHITE
Screen"! And so i able to run the Rom Update, and it works fine!
Ah yes, my Phone tell me i'm in "SuperCID" Mode...so "WHY" i must use
this "CID Bypass Tool" ....crazy??? Or is my Phone a Liar...?
I have now installed this Rom, it Works a bit faster i mean:
RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.90_Ship.exe
But it is the same Rom Vers, like my old O2-Cosmo Rom, WM5.0 (1) with
Future Pack. But i have now the HTC Splash Screen!
So i want now to install this Rom (with WM6.1) :
"NoThrills_WM61_GER_V3.exe"
This is a "Kaiser" Rom... "Warum eigentlich Kaiser, hat der Beckenbauer damit
was zu tun...*g*
But when i try to run again the "Excalibur USPL- CID BYPASS" tool, my
dash show me only the "Linux Monkey" (Pinguin) Screen and hang up the
Phone, so that i must remove the battery....
The "White Screen" (that is the Screnn you must have to flash your Rom),
will dont come anymore....i dont know how...??? I start this batch file,
"Uspl.bat" ... and follow the instructions....mmh....allways i get the Linux
Monkey Screen...and not the white screen, "WHY" ?
Anybody a hint, how i can move into the "White Screen" Modus?
And a Question, is this Kaiser Rom compatible to my HTC S620 ?
Please belive me, i read a lot here...but i cant figure out this..., this Forum
here is a bit confusing, on many Threads you can read other informations!
Plz anyone, tell me (who know it) how i move exactly in the White Boot Screen?
Thank you!

If I understand you right you flashed a rom from the HTC Kaiser on your Dash. That's Windows Mobile 6.1 Professional for Touch Screen Devices. You need a rom from this thread for your Dash, not the Kaiser thread. Those ROM's are specifically for that phone. I doubt they'd even work on other Touch Screen phones because of it has the radio (I believe Radio is like Drivers in Windows, I may be wrong.) for that phone. As to fix your problem. I have no clue. Maybe you can get lucky and reflash it with an Official Dash ROM for your phone, but better getting advice on that from one of the more experienced people here. I'm a bit of a newby when it comes to this phone stuff. Good luck...

drkfngthdragnlrd said:
If I understand you right you flashed a rom from the HTC Kaiser on your Dash. That's Windows Mobile 6.1 Professional for Touch Screen Devices. You need a rom from this thread for your Dash, not the Kaiser thread. Those ROM's are specifically for that phone. I doubt they'd even work on other Touch Screen phones because of it has the radio (I believe Radio is like Drivers in Windows, I may be wrong.) for that phone. As to fix your problem. I have no clue. Maybe you can get lucky and reflash it with an Official Dash ROM for your phone, but better getting advice on that from one of the more experienced people here. I'm a bit of a newby when it comes to this phone stuff. Good luck...
Click to expand...
Click to collapse
Thank you!
But "NO" i don't flash my HTC S620 wit a Kaiser Rom..."What a Luck" ...i try
to do it...and now im Happy that this have not work for me!
I actually install this Rom:
RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.9 0_Ship.exe
I have now understand, what is a Kaiser ROM, it is the Device Name, oh
Man...i'm so a dummy....haha...
But i have a success, i change my O2 Rom to a HTC Rom
The Question now is, how i move in the "WHITE BOOT SCREEN" ?
That i'm able to Update my Rom to a WM6.1, if posible, a German 6.1 Rom.
Is here a German WM6.1 Rom?
Is a WWE a Multilingual Rom, is in such ROMs German Language included?
And how i can remove the CID forever, so that im able to update a ROM
without a CID Bypass Bootloader?
Any ideas?
The thing is, ...this CID Bypass Bootloader work "ONCE" and now that
Bootloader dont work anymore...i dont know why...i get only the Linux
Pinguin Screen...and this is a "Hang up Screen" so that i must remove
the Battery, for a new start.
But i get nevermore the "White Boot Screen" ...how is this posible?
I do the same, like before i do...mmh...???

If I understand what's been said. You need to re-run the CID-Bypass anytime you reflash you phone. As for a German ROM. I am not sure. Ypu'd need to look around through the furom. You could try the "Seach" feature and see what you come up with.

drkfngthdragnlrd said:
If I understand what's been said. You need to re-run the CID-Bypass anytime you reflash you phone. As for a German ROM. I am not sure. Ypu'd need to look around through the furom. You could try the "Seach" feature and see what you come up with.
Click to expand...
Click to collapse
Thank you,
but i try to run the "CID Bypass" but the "CID Bypass" run every time
into the "Linux Pinguin Screen" ...(i think it is programed in Linux?)
But the same "CID Bypass Bootloader" - work - for me "once" !
But now, not ! I dont know why?
With this CID Bypass Bootloader, i flash my Q2 Rom into a HTC Rom !
But that was only possible, as my dash move with this "CID Bypass Bootloader"
INTO a "White Boot Screen"...!
But "HOW" this was possible...i dont know...now this CID Bypass Bootl.,
wont work anymore....
You know what i mean?
The same tool (CID Bypass) wont work anymore, it work one time only.
When i now try to run this CID Bypass, i get a "Linux Pinguin Screen" in
Black. So there is a little Linux Pinguin "Preloader" ...and then the Phone
have a SOD..."Stand of Death" you Guys call that so, i think so!?
To search here, is very strange for me....i get results of all Forums here!
That was the reason why i want to try the Kaiser Rom, while i search
here in the Excalibur Forum...so i had think so, that was wrong, you know!?
Sorry, my english is not good enough to tell exactly my expirience!
But Thank you for Advice!

Hum, does it still look like windows mobile? If so they may have just changed the load screen. Either way when you run the bypass program, there' one step that'll show a screen on the phone when in windows mobile itself and you must press the center soft button to "continue" and then it'll enter the white screen mode. Sometimes I forget this step and bounce through the steps missing that. If you can't get into windows mobile, try reflashing with your phones official ROM first. They don't require the white screen. There's also a way to enter the bootloader screen by holding down a button, I forget which, while you press power to turn the phone on.

drkfngthdragnlrd said:
Hum, does it still look like windows mobile? If so they may have just changed the load screen. Either way when you run the bypass program, there' one step that'll show a screen on the phone when in windows mobile itself and you must press the center soft button to "continue" and then it'll enter the white screen mode. Sometimes I forget this step and bounce through the steps missing that. If you can't get into windows mobile, try reflashing with your phones official ROM first. They don't require the white screen. There's also a way to enter the bootloader screen by holding down a button, I forget which, while you press power to turn the phone on.
Click to expand...
Click to collapse
...no no, this ROM runs great! I have no Problem with this Rom!
But i have found a Solution "Yeah" !
For all who want to flash a O2 Cosmo!
Try this Link: Click
Thanks to the Uploader, found it by searching!
The last in line: "Unlock_phone_files.zip" !
Follow the steps in the text document!
Work fine for me!
But when you want to flash, and you get a connection ERROR, remove
the USB cabel, and put it back on your Dash, and run then only the
"ROMUpdateUtility.exe" again and it will work.
(Your srceen are allways WHITE!!!)
I had flash for 10min the "RUU_Excalibur_SPL-1.11_UpgradeOnly.exe"
You must extract the exe file, and copy the *.nbh file to folder 3!
After you run the "Auto.bat" and the Connection Error, click finish,
remove the USB cabel, put it back on the dash and run again and only
the "ROMUpdateUtility.exe" !
All work fine!
Thank you Developers!

How to upgrade ROm with nbh file

As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).

The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.

thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted

stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .

You can download my ROMs, they come with the full package

trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help

stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...

stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?

Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP

Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.

strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?

Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.

From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.

thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading

stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )

Lol I can't belive I forgot to tell you that!

It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?

Thank you, here you go!

sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!

nevermind, it worked ok on the second attempt!

WLAN ERROR NOW FIXED!!! Thanks to gruptnt

Thanks to gruptnt over at this thread: http://forum.xda-developers.com/showthread.php?t=490681
WLAN IS NOW FIXED!!!!!! Flash without worry anymore.

my wifi work great again
That is perfect solution !!!
thank !!!

complimenti....
penso proprio che questo tread sia
sticky
eng: sticky for ever

binht611 said:
my wifi work great again
That is perfect solution !!!
thank !!!
Click to expand...
Click to collapse
I also have the same problem... i visit the above post but the post is very big... can you please tell me what steps you follow....
Thank you.... i also have trinity and after this error my trinity hangs frequently.....

These two posts should help:
http://forum.xda-developers.com/showpost.php?p=5313622&postcount=340
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345

WLAN IS NOW FIXED!!!!!! Flash without worry anymore.[/QUOTE]
Dear Supersport....
thanks for update...
but after the complete procedure (all report was ok), the phone dont restart.
i can see the rom number...etc etc, but remain the htc logo on the black screen.
How can resolve this ?
Thanks a lot for your help.
Vito95

vito95 said:
Dear Supersport....
thanks for update...
but after the complete procedure (all report was ok), the phone dont restart.
i can see the rom number...etc etc, but remain the htc logo on the black screen.
How can resolve this ?
Thanks a lot for your help.
Vito95
Click to expand...
Click to collapse
Have you tried to flash another ROM to the phone and see if that gets it going again?

First of all thanks to you SuperSport and GRUPTNT for this
But for me, unfortunately, it doesn't works, i'm unable, when running Mtty116, to get the USB connection. I got Vista and i think it's the problem.
If somebody got an idea about it...

kabtv said:
First of all thanks to you SuperSport and GRUPTNT for this
But for me, unfortunately, it doesn't works, i'm unable, when running Mtty116, to get the USB connection. I got Vista and i think it's the problem.
If somebody got an idea about it...
Click to expand...
Click to collapse
yes, confirmed, you must XP

SuperSport said:
Have you tried to flash another ROM to the phone and see if that gets it going again?
Click to expand...
Click to collapse
Hi, after some hours the phone is restarted.
Now the only problem is that in comm manger application, Wlan dont work.
remain in off state (red botton).
can you help me?
regards

narshorn said:
yes, confirmed, you must XP
Click to expand...
Click to collapse
Please see this update.
Now, you can run MTTY in Windows Vista and Windows 7. I've made a Video Tutorial Showing how. It's Step 2b on this page:
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345

my god, you worked late yesterday on this...
thanks for this and everything else, but again, i think that nothing is going to be easy for me...first, if i disconnect USB from mobile center, it's not in the computer management anymore...so i can't change the driver...next if i reconnect the USB connection, i can find it in the device manager but i can't change the driver because:
On my Vista home premium(32 bits operating system) : ''The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for 32-bit systems.
and on my Win7(X64 Home Premium): it's the same message except for X64
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the splash screen

kabtv said:
my god, you worked late yesterday on this...
thanks for this and everything else, but again, i think that nothing is going to be easy for me...first, if i disconnect USB from mobile center, it's not in the computer management anymore...so i can't change the driver...next if i reconnect the USB connection, i can find it in the device manager but i can't change the driver because:
On my Vista home premium(32 bits operating system) : ''The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for 32-bit systems.
and on my Win7(X64 Home Premium): it's the same message except for X64
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the splash screen
Click to expand...
Click to collapse
Ok, I think I forgot to mention one step. Before you disconnect WMDC, be sure your phone is in Bootloader Tri-Color Screen Mode. (Also, before flashing any ROM, be sure to be in Bootloader Tri-Color Screen Mode. [Power/Camera/Reset]) Your Computer will Still be able to see the Phone in Device Manager after WMDC is Disabled.
I don't believe this will work on 64bit Windows. I tried and stopped after a couple failures.
I'm sorry your WLAN is not working still. That's not good and we will do our best to get you back to WiFi.
Looking at the Video again this morning, it does appear to go sort of fast. Hit Pause when needed to read the text pop-ups.
Next thing is I believe you may be selecting the wrong option when you browse for the driver. Be sure you are selecting the option: "Let me pick from a list of device drivers on my computer". If you get a warning that the driver is not the correct driver, BUT you have the option to go ahead with the installation, go ahead and install it. It's a Windows XP Driver, so Win7 will not suggest installing it. But when it's all over, you will be removing it again and reinstalling the Win7 Driver.

SuperSport said:
Ok, I think I forgot to mention one step. Before you disconnect WMDC, be sure your phone is in Bootloader Tri-Color Screen Mode. (Also, before flashing any ROM, be sure to be in Bootloader Tri-Color Screen Mode. [Power/Camera/Reset]) Your Computer will Still be able to see the Phone in Device Manager after WMDC is Disabled.
Click to expand...
Click to collapse
That was it...i succeed to install the driver and WIFi works again
SuperSport said:
I'm sorry your WLAN is not working still. That's not good and we will do our best to get you back to WiFi.
Click to expand...
Click to collapse
don't be, you do so much for the community here
Thanks again...

kabtv said:
That was it...i succeed to install the driver and WIFi works again
don't be, you do so much for the community here
Thanks again...
Click to expand...
Click to collapse
That was FAST , good work! Happy to hear it worked for you.
Also, be sure to delete the XP driver from Device Manager, and re-scan the system to install the original driver. And then, re-activate your USB Connection in WMDC.

kabtv said:
my god, you worked late yesterday on this...
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the 3G Asia splash screen
Click to expand...
Click to collapse
did you experience that...?

kabtv said:
did you experience that...?
Click to expand...
Click to collapse
Did you use SSPL_TRIN.exe to enter Bootloader Mode before flashing? I think that is necessary for a full flash of OEM.

SuperSport said:
Did you use SSPL_TRIN.exe to enter Bootloader Mode before flashing? I think that is necessary for a full flash of OEM.
Click to expand...
Click to collapse
i used the sd card method...

kabtv said:
i used the sd card method...
Click to expand...
Click to collapse
You would still need to use SSPL_TRIN.exe to put the phone into a special Bootloader Mode because the OEM ROMs overwrite the HardSPL on your phone. This special mode allows that to happen.
Copy SSPL_TRIN.exe & your TRINIMG.nbh to your phone's SD Card Root. From your phone's File Explorer program, browse to your SD Card and tap SSPL_TRIN.exe to run it. If asked, go ahead and say "Yes". This will enter a special Bootloader from which you can flash the OEM's.
Only use this method to flash Back to OEM ROMs and NOT for Normal Flashing. You want to use the HardSPL's Bootloader to flash Cooked ROMs to protect your phone.
Download SSPL_TRIN.exe
And, remember, after flashing an OEM ROM, be sure to flash a HardSPL back on your phone BEFORE Flashing Custom ROMs again.
Sorry everyone for getting off topic. kabtv, if you need more help with this, PM me, I'd be happy to help.

SuperSport said:
You would still need to use SSPL_TRIN.exe to put the phone into a special Bootloader Mode because the OEM ROMs overwrite the HardSPL on your phone. This special mode allows that to happen.
Copy SSPL_TRIN.exe & your TRINIMG.nbh to your phone's SD Card Root. From your phone's File Explorer program, browse to your SD Card and tap SSPL_TRIN.exe to run it. If asked, go ahead and say "Yes". This will enter a special Bootloader from which you can flash the OEM's.
Only use this method to flash Back to OEM ROMs and NOT for Normal Flashing. You want to use the HardSPL's Bootloader to flash Cooked ROMs to protect your phone.
Download SSPL_TRIN.exe
And, remember, after flashing an OEM ROM, be sure to flash a HardSPL back on your phone BEFORE Flashing Custom ROMs again.
Sorry everyone for getting off topic. kabtv, if you need more help with this, PM me, I'd be happy to help.
Click to expand...
Click to collapse
Hi,
I have moved to hd, so I didn't come to this forum since then...
I will try to explain a little better the HSPL and official roms.
First, there are several HSPL for trinity. The best one is olipro 1.30, so this th eone we want to get into the trinity.
First the theory, in a .nbh file we have several parts: ipl,radio,spl,splash,os,extrom In an official rom contains all parts, a custom ROM normaly nowdays contains os only. Whith older kitchens contains splash+os
The HSPL of olipro is protected so it is not overwrited by the roms. So it is safer, and you can't get a brick if you don't flash the ipl part.
The SPL is the tricolor program, so when flashing you should view the spl that you have in the trinity.
Whith the customruu of the trinity there is a file called enterbootloader.exe which is transmited to the pda and executed to display the spl. This file is SSPL_TRIN.exe renamed.
Ok, so this are the scenarios:
1) you launch the romupdate whith as/wmdc connected:
Enterbootloader is transmited and executed -> Special SPL 1.07
So when flashing you will flash every part of the nbh (all for oficial, os for custom)
2) you enter manually in boot loader
The SPL in your device -> olipro 1.30
So when flashing you will flash only (ipl,splash,os,ext)
The safer method is to put manually the bootloader mode and flash. You can have the HSPL whith an offical ROM whithout worries. Though there is an exception: you want to update the radio.
If you want to update the radio use method one so you run the other SPL.