I have the Siemens sx-66 pocket pc phone and it really got annoying having to wait 1 minute for the device to go into standby mode. Because my power button no longer powers the device off. So i googled and searched around until i found this freeware program http://www.freewareppc.com/utilities/psshutxp.shtml It is a utility that when once installed, can be used to power down, reset, or turn off the backlight. With an interphase similar to the windows xp power-down prompt.
This i found to be much better than waiting a full minute for the device to power down.
I mapped the program to my calendar button since i never use calendar anyway, and when the program pops up, i tap "Turn Off" and it instantly puts the device into standby.
This doesn't fix the Hardware power button malfunction, But it sure beats waitin' around wasting precious battery.
Hi
I'd recommend hard resetting your PDA and starting all over again.
I'm 99% sure that your device will go to standby correctly after cleaning it up (hard reset).
Remember to backup your data.
already tried hard resetting. Once accidently (let my sister play with it until the battery was COMPLETELY dead). and 2 more times intentionally from reccomendations (after making back-ups of course). Still had the same problem afterwards. I'm happy with the program.
p.s. Best part is it's free!
Related
My PDA2k seems to be turning itself off even when in use :?
I use TomTom3 in the car, and even when the power is plugged into the bottom it was turning off ever few minutes.
I just took a phone call and when I has finished talking I noticed the screen had gone blank and pressing the red handset didn't bring it back, the power button did. (I do have screen lock on).
Having said that, thinking about it, I was watching TV progs on WMP on the way home and it never shut itself off once :?:
Anyone have any idea what is going on? Is this normal?
I have an o2 XDA2 S running TomTom 3 with the TomTom cradle. I occassionally find that the pda just turns itself off.
It doesn't happen all the time.
I have also found that sometimes during a call the pda turns itself off and I cant get it back on by pressing the handset key, just the on off button.
Cheers
Fatzzz
click start>settings>system>backlight . . in here you can change the time it takes to turn off in not touched the device, 5 mins max.... also if you click button lock in system settings, you can set it so that when it happens, you can tap screen and it comes back on again.... tho i prefer to keep that off, otherwise it may ring people while it its protective case.. :lol:
and going by all the software that is out for these xda's, you can prob find a programe /or hack to change it even longer if you need that!!!
But when it is on external power (plugged into the car using TT3), it shouldn't shut down at all. Aside that, when in use (when receiving a call) I wouldn't think it should shut down should it?
I have a seperate scren lock installed too. I found the built in one not enough. When it is in my belt pouch and I get a text, or connect to my BT car kit or something, it wakes it up. All of a sudden all the keys are being pressed (by the squeeze of the case) and all kinds of applications are opening!
I don't know if it's coincidence, but ever since I upgrade to WM5 and went back to WM2003SE, my navigation button has not worked the same.
For example, a lot of times I can go right, but can't go back left even after multiple presses, and then most of the time the middle or 'Enter' button doesn't do anything. Itz become extremely annoying because I have lost my 4th stylus by now, and I haven't received my new ones yet. Oh, and I can't play MorphGear right anymore.
Is it just hardware? Cuz I first went to ROM v.1.42 and then went to 1.40 to see if it was a problem with the new ROMs, but I still have the same problems. Any one else having these issues, and has any one fixed it??
UPDATE: WTF!! Now it went from bad to worse. Yesterday, when I left my BA at home, once I returned from work I noticed that PIE was constantly opening over and over again. Then some of the buttons wouldn't respond like the POWER to turn it off. The backlight pretty much stayed lit the whole time because it looked like the keys were stuck. I upgraded to WM5 derived from the Himalaya today and now the START menu comes up almost every 5-8 seconds, followed by a real quick succession of multiple "clicks", and my 'Start' button doesn't seem to be responding.
Can anyone help? Has my BA gone to the state of retardation? Is there a way to bring it back??
How did you go with this problem.
Mine is doing similar ever since a low battery problem.
DLC
I am experiencing the same kind of problem... and it happend after upgrade to WM5. But the problem likely to be caused by hardware.
I had problems with my phone opening up the start menu, opening IE, and closing programs immediately after opening them, Of course I had dropped the phone halfway in a cup of ice water, but immediately after tossing it in water (after hanging up, I simply dropped the phone into the cup-holder I have mounted below my stereo which happened to be occupied by a glass of ice-water I placed there without remembering) I shook the water out of the phone, and for about as much as i could stand the heat, I put a hair-dryer to the end of my phone which i pryed open after removing as many screws as i could. After a day of quirky behavior, and a night of having the battery seperated from the phone, my phone is back to its old self with the water-damage seal unnaffected after missing the line of water by just a few milimeters. I suggest going to Settings>Buttons and making every button perform no function at all followed by going to Settings>System>Button Lock and having all keys locked except your power button. Hope this helps!
Having somewhat the same issue. Only the "Down Navigation button" isn't working. Although, I'm still using Windows Mobile 2003 SE. Is there a DIY fix for this?
bump...
any suggestions?
Navigation Up/Down
Mine isn't working either - is this a hardware fault?
trying pressing down a bit harder. coz when i did that for mine, the "down" button works. normal applied pressure as for the rest of the buttons(left/right/up) does not seem to work with the "down" button, but a bit more force would make it work.
this happens to my IIs.. mebbe u can try.
Button problems
After no trauma or dunks in water several of my buttons have gone awry. My green phone button, red phone button and navigation buttons all open contacts. The green phone button activates voice command at the same time that it opens contacts. I've never switched from WM2003SE. I've checked the buttons settings and they are the same as always. Most bizarre of all is that my battery is quickly discharging. I suspect some software process is running hard but don't have any idea where to start to fix this. Soft resets have not helped.
buttons gone crazy
A hard reset fixed the problem but was a typical pain to get everything back going. Sprite backup works great until the first attempt to ActiveSync with your PC.
Hello,
Can someone help please, I’ve overclocked my Qtek S200 (Prophet) to such a speed that my phone is not capable to run on.
The difficulty is, before I have done this I foolishly “Registered” in start-up menu for the overclocking software to run at 288 MHz.
Now when restarting, the phone is reaching a point of Window Mobile and then it’s either stops dead or restarting it self constantly.
I can guess the solution but don't know how to do it I need somehow to stop Overclocking software to be used during a boot up.
Or maybe even a hard-reset. (I did that already but it’ freezes at the point where I can see 3colors on the screen and nothing further. Any suggestions please?
The easyest way is to perform a Hard Reset. Make sure you have the power button, the camera and the comm manager button pressed while reset ing the S200. The other way is to take a look at the startup folder and see if there's a program that is automaticaly launched on startup that changes the speed of the device. The only thing you have to do is delete that entry...
Hope it helps.
RE: SOS
I did try it to do hard reset the way you said, in the end this really helped.
I removed the battery and left it for about an hour. Then plugged my USB cable, done what you normally do on Hard Reset, by pressing Photo button on the side and Comm. Button and pushed the pen. When phone stopped at the point where I could see 3 colours, at the bottom USB text appeared. I re-install new ROM and magic! My phone is back from the dead
After devunlocking last night, now my phone is messed up
The problem is the back,windows and search button no longer work, the portion of the screen that they take up is now like an extension of thescreen it just selects stuff as if it were at the bottom of the screen. Any help to reset all the files in root to factory, I tried to hard reset and soft reset.
Maybe I screwed up the registry or some files. Thanks for any help
try factory reset. hold camera + volume down + power. when phone vibrate release power button while holding the other 2 buttons. should prompt you to reset your phone. hope that works
Thx
I tried that but it enters USB Host mode, I also tried holding down up and down volume and power button to reset which resets it but doesn'tfixmy problem. it's acting like the part of the screen where the windows, search and back button are are now part of the regular screen and those 3 buttons no longer do anything.
This sounds rather like a hardware error. Your calibration of the touchscreen is messed up. I suggest you send it in. You still should have warranty?!
Btw. I don't think this has a connection to unlocking the phone!
If the phone hasn't been tampered with physically, it should be enough to just sync it without re-unlocking it, and it should be locked again.
Thx
I got a new one on the way. I didn't delete any files or regedit a bunch of stuff just a standard dev unlock and it started acting squirrly.
Hi guys.
So i managed to get my desire wet/damp and whilst it still works it has developed 3 issues:
1) The weirdest of all - the phone wont go into standby, as soon as you press the power button or let it timeout the screen goes off and they instantly turns back on to the lock screen. If i leave it, it will timeout again on lockscreen and come back on, it does this forever. I have done factory resets etc, all the same. Weird right. As i result i would like to reflash the mod and see if that fixed it as assuming its software related (somehow).
2) Volume keys do not work - think means i had issues getting into recovery. Finally found a widget to do it and then....
3) Trackpad does not work in recovery so i cannot re-flash or try any new rom to see if that fixed (1)
Proper catch 22
Any suggestions appreciated.
Thanks
Bridgstfer
Install 4ext touch recovery.
Update after installing touch recovery
OK I HAVE AN UPDATE:
The plot thickens but i have managed to S-OFF my Desire and eventually install Clockworkmod Touch which obviously doesn't require me to use the trackpad button so I was able to use Recovery. I wiped the phone and tried reflashing the ROM i had been using (Insertcoin) but this made no difference, the phone still keeps waking up immediately that it goes to sleep (either with power button or by sleeping timeout).
So i decided to install a completely different ROM (CM10_VJ_4.1.2_v3.0) and this installed fine. Now the phone will go to sleep and stay asleep if I press the power button. Problem solved I thought!
Now when the phone is asleep 50% of the time, trying to wake it with the power button will cause it to reset immediately and goto the white HTC screen. When it restarted it sits on the unlock screen and keeps timing out, screen goes off, then immediately on again - weird. If i unlock and lock with power button it will behave. For some reason the Search key will wake the phone every time no issues. Only the power key to unlock causes it to reset. Phone is sleeping according to Battery info.
Any other suggestions for what I could try. Could this possibly be something hardware related now? If there a way i can log the key presses or reason it wakes/resets?
Any help really appreciated, the phone is pretty unusable with this reset issue now.
THanks
Bridgstfer
theres a few videos on youtube, if it was me i would take the phone apart and clean all round the buttons. mite solve it. But as it got wet, the water could of damaged something in around the trackpad r power button, hense always waking the phone.
Sent from my HTC Desire
Thanks mate. So i tried this and installed CM7 today and have discovered something. As i said above the volume down button doesn't work and the volume up only works with some persuasion. Once i installed CM7 the problem where I lock phone with power key and it instantly wakes up now persists (on the JB rom it at least stayed asleep but reset if power button was pressed again).
However whe i changed the display timeout to 15seconds i watched as it timed out and instantly woke then noticed the volume would increment down one notch each it woke up again. This leads me to think that rather then the volume down not working at all it is actually stuck down permanently and could be causing the issue here. Is there any way I can find out if this is the case and disable the volume keys through software or do i need to open up the phone and disconnect it?
Thanks for any help - i think we are getting there!
Bridgstfer
I actually worked out that the trackpad is being pressed down constantly too because on CM7 when i disable trackpad to wake the phone actually stays asleep. Stil the phone resets if i try to wake with power button though, must be something to do with the button combo being held down.
Is there any way to disable both volume and trackpad buttons at the kernal/system level?
Tried button remapper but does not allow to remap the trackpad press.
With a file explorer, go to
system>usr>keylayout and modify bravo-keypad.kl.
I'm just back from holiday where my Desire had a ten-minute swim in sea water!
Naturally it was stone dead when I remembered it was in my pocket as I waded across an inlet which was supposed to be ankle- deep but was over 1.5 metres in places
I thought there was no point in drying it out without first removing all salt so (minus battery and cards) held it under a tap for several minutes then left it to soak in tap water in the sink for 30 minutes.
I then dried it over gentle heat for a few days then tried the battery. The vibrator ran continually and the white LED flashed randomly but nothing else. After another two days drying it booted - but only into Fastboot and the vol switch didn't move the cursor. But after another two days - it worked almost perfectly! The vibrator is dead and the screen a bit streaky, but all the other sensors work just fine and it's quite useable.
I had been logging the hike using My Tracks and it actually shows the course going a short way into the sea.
do you have an assurance or warranty?
if yes-->change phone.
abaaaabbbb63 said:
With a file explorer, go to
system>usr>keylayout and modify bravo-keypad.kl.
Click to expand...
Click to collapse
Thanks for this. I actually got an app that let you remap the keys but it does not let you do anything to the trackpad click button (which is now the one stuck down). See photo of whats in my bravo-keypad.kl file here:
http://dl.dropbox.com/u/64089332/20130106_194659.jpg
Any other way i can disable the trackpad completely. Perhaps at the kernel level?
Thanks