Develop Bugs

acro s hard bricked

i got my acro s hard bricked
I used twrp for making a backup for the the stock firmware.
and then i installed the 5.0.1 the lollipop custom firmware
the link :http://forum.xda-developers.com/showthread.php?t=2799765
, but it was not rooted but somehow the recovery was working good .. i decided to restore the stock using the backup version which i made in the beginning coz the ROM was sucks. after finishing the loading it asked for restart and after that i got a blank screen and the following
-no response for charging
-no LED lights at all
-non of any combinations working (volume+ and power on , hard reset or volume+up+power on)
-access to fastboot or flashtool is denied
-no power on no vibrations
but after a day of charging an Orange LED appears but i waited for two more days till the LED disappeared
and tried the flashtool but all i got is "device connected but with debugging off"
i think the problem was using recovery with unrooted device but can't find a solution for that
any suggestions ??!!
Notes:
am too calm
am not panic ..
am not in hurry too
and it's not a big deal
i just want the device back in order to get my stuff from it that's why going to Sony service center is not an option coz they format the whole device

Similar here on st26i
On 4.4 Paranoidandroid I've got after a five days of use in one second a lot of force closes. From every app from the system. It was impossible to stop it, or make normal reboot, so I've hold Power + VolUp and waited till three vibrations. Then turn on the phone, normal vibration and SONY logo.
After that black screen. First with some backlight, after minutes phone backlight turn off.
Now:
- No response for Power button
- No response for Power+VolUp combination
- No charging LED
- System find only SEMC Flash Device
- Flashtool says Device Connected with USB Debugging off
- Combination Power+VolUp make connected device to disconnect and connect again as SEMC Flash Device
- Cant acces fastboot, dwonload mode.

smogf said:
Similar here on st26i
On 4.4 Paranoidandroid I've got after a five days of use in one second a lot of force closes. From every app from the system. It was impossible to stop it, or make normal reboot, so I've hold Power + VolUp and waited till three vibrations. Then turn on the phone, normal vibration and SONY logo.
After that black screen. First with some backlight, after minutes phone backlight turn off.
Now:
- No response for Power button
- No response for Power+VolUp combination
- No charging LED
- System find only SEMC Flash Device
- Flashtool says Device Connected with USB Debugging off
- Combination Power+VolUp make connected device to disconnect and connect again as SEMC Flash Device
- Cant acces fastboot, dwonload mode.
Click to expand...
Click to collapse
it seems like we stuck here

Yup.
Is there any windows/linux software for SONY devices like KDZ for LG phones? Which have an emergency flash option and, etc.???
/EDIT
So... I have read a little and I think (wchich I supposed before witout reading) boot is "dead".
I think it will be possibly to flash new boot with s1boot, but. I cannot find service manual for lt26i. Can anyone have it? Or can say where is the Test Point in this device?

makaom said:
i got my acro s hard bricked
I used twrp for making a backup for the the stock firmware.
and then i installed the 5.0.1 the lollipop custom firmware
the link :http://forum.xda-developers.com/showthread.php?t=2799765
, but it was not rooted but somehow the recovery was working good .. i decided to restore the stock using the backup version which i made in the beginning coz the ROM was sucks. after finishing the loading it asked for restart and after that i got a blank screen and the following
-no response for charging
-no LED lights at all
-non of any combinations working (volume+ and power on , hard reset or volume+up+power on)
-access to fastboot or flashtool is denied
-no power on no vibrations
but after a day of charging an Orange LED appears but i waited for two more days till the LED disappeared
and tried the flashtool but all i got is "device connected but with debugging off"
i think the problem was using recovery with unrooted device but can't find a solution for that
any suggestions ??!!
Notes:
am too calm
am not panic ..
am not in hurry too
and it's not a big deal
i just want the device back in order to get my stuff from it that's why going to Sony service center is not an option coz they format the whole device
Click to expand...
Click to collapse
Same situation, really need help from someone because its my only android phone right now.

[Q] Black screen, no boot, help !

Hello
3 days ago I did root my Z1 compact, everything was ok, I did backup TA etc.
I didn't unlock bootloader, just root by downgrading kernel and then restoring last.
Phone worked for 3 days, without any problems and then turned off while browsing web.
It seems like batery is drained but it's not. I tried charging it but doesn't help.
When connected to pc, pressing power on and vol -, newest flashtool shows:
08/021/2015 00:21:54 - INFO - Device connected with USB debugging off
08/021/2015 00:21:54 - INFO - For 2011 devices line, be sure you are not in MTP mode
Windows Device menager detect device as:
USB Input Device HID
Flashtool shows:
08/031/2015 00:31:50 - INFO - List of connected devices (Device Id) :
08/031/2015 00:31:50 - INFO - - HID\VID_0FCE&PID_D19A\7&2ED8680C&0&0000 Driver installed : true
08/031/2015 00:31:50 - INFO - - USB\VID_0FCE&PID_D19A\6&6C1D71&0&3 Driver installed : true
08/031/2015 00:31:50 - INFO - List of ADB devices :
08/031/2015 00:31:50 - INFO - - none
08/031/2015 00:31:50 - INFO - List of fastboot devices :
08/031/2015 00:31:50 - INFO - - none
Any chance of unbrick ?

Just flash stock rom in flashtool. I think if this work.

It's was not detected propertly in flashtool and doesn't boot.
RESOLVED PROBLEM:
After 2 days of fail unbricking phone (via flashtool, pc companion and all other stuff) I decided to send phone on warranty, while I been packaging everythin I did push power button and phone start like it should. After boot battery was 56%.
Anyone can explain me what happend ?
I had feeling like rooting and mods caused data corruption and broke bootloader. I was wrong !
Maybe downgrading kernel to older version caused some battery calibration problems ?
I been charging phone for 15 hours and no success.

hEllo I got same problem but with different way , i hope somebody can help me, this is very bad for me, screen off and i cant go to recovery, can someone please tell me how to flash from flashtool without get error, because i see that with flashtool you can only flash if debug is active, and i cannot active !! because no screen ....help please

I've got the exact same problem.
Rooted 2 days ago.
While at work my battery went empty, so i charged it for about 2 hours when i got home. Red charge LED was on while charging. When pressing powerbutton nothing happened at all. Pulled it from the charger, pressed powerbutton agian and got no reaction what so ever. Pressed red "off" button and got 3 vibrations, then nothing. Now the charge LED doesent light up when plugged to wall charger. Cant enter fastboot og flashmode.
Very open to suggestions at this moment.

paua__ said:
I've got the exact same problem.
Rooted 2 days ago.
While at work my battery went empty, so i charged it for about 2 hours when i got home. Red charge LED was on while charging. When pressing powerbutton nothing happened at all. Pulled it from the charger, pressed powerbutton agian and got no reaction what so ever. Pressed red "off" button and got 3 vibrations, then nothing. Now the charge LED doesent light up when plugged to wall charger. Cant enter fastboot og flashmode.
Very open to suggestions at this moment.
Click to expand...
Click to collapse
Press Vol+ and Powerbutton for a few seconds (it is like taking the battery out of the device). The phone should vibrate three times.
Then try to restart it.

moonryder said:
Press Vol+ and Powerbutton for a few seconds (it is like taking the battery out of the device). The phone should vibrate three times.
Then try to restart it.
Click to expand...
Click to collapse
Tried all different button combos, then let it sit in the charger while i booted up my good old Samsung S1. After a total time of 4 hours plugged in the Z1c suddenly gave life and bootet indicated 1% battery and charging. Very strange considering the red LED was indicating a charge the two hours before it went in to "coma".
Sometimes it seems like these devices have moods and feelings, haha.
Bottom line: My device is now working and charging. Backing everything up now so i dont have to panic if it should occur again.

[Q] No response Soft Brick

Hi!
Yesterday I want to install new ROM, but while I was doing it my mobile turned off and didn't want to wake up. Totally no respone, no LED when plug in to charger, no reaction on any buttons. I made a recovery but I can't restore it, because I can't power on my phone. I tried to flash new clear, stock ROM, but when i plug in XS to PC, when flashtool ask for it i got this log:
Code:
05/048/2015 19:48:19 - INFO - Device connected with USB debugging off
05/048/2015 19:48:19 - INFO - For 2011 devices line, be sure you are not in MTP mode
I think I had USB Debugging on (I install CWM before install ROM), but now I can't check it or change it, because I have a brick
I reset my phone just like was written in THIS thread, when the RED LED appear i prepare my flashtool to flash and then plug in my phone to PC, but then nothing happend and RED LED appear again. Flashtool didn't see my phone.
After few minutes pluged in charger RED LED disapear and back to begining.
There are any solution to fix my phone?

Htc 816g Bricked and wouldn't connect to PC anymore. after installing recovery

Yesterday i attempted to install a custom recovery on HTC desire 816g. using fastboot command the process went fluently in fastboot mode but when i tried to open the recovery from hboot the screen got stuck at htc logo. After a while i gave up soft reset the phone using hardware buttons and since than the major problem began.
On restart the device screen turned blank as in didn't display anything and the red notification led stayed on. It stayed like this forever so i plugged in the charger and reset the phone again . Now it showed me just the battery icon with charging sign in the middle with no signs of how much it is getting charged or how much it is charged. It just stuck on the charging on and of course the red notification led continuously turned on. when unplugged and restarted it again stayed blank with red led on forever. SO i thought if its a mtk chip i would just reset the device by inserting the stock rom using sp flash tool. So i reset my phone where the led turns of for a second and turns i believe which is resetting it and connected the usb and nothing. windows does not simply detect the HTC anymore. SO i opened the device manager to see if it at least shows up as an unknown device in it but nothing. It simply does not show up. I have tried everything. restarting it connecting the usb unplugging the usb before restart on restart after restart all possible combination nothing works. But the led keeps strongly flashing red. So i thought its the battery problem. I kept it as is with red light flashing it discharged on its own and now when i attempted to start it the red led was blinking now. So i put it on charging overnight. And after all efforts its still the same. I need your help the most. Cant loose a phone now. Is it permanently bricked?

Z1C Overheating - unable to boot / charge

Hi guys,
I have been "gifted" by broken Xperia Z1C and I'm trying to fix it.
The issue is that when I try to power on, it's trying to boot, but it will turn off during blue animation, not sure if it's boot logo. However, when I try to charge the phone, it will show
"Your device turned off due to overheating. Charging will continue after the device has cooled down." and as you supposed, it will never happened.
I have tried:
- hard reset by volup + power button
- reset with red button near sim card
- xperia companion repair - result: successfully repaired, but nothing happend to device
- flashing older firmware D5503_14.5.A.0.270_Generic BAL.ftf using Flashtool - successfully but nothing happened
- some magic commands with fastboot.exe, nothing happened
Then I have tried to change battery from another Z1C, device is not responding on power on button (just 3 times red led blinks after charger connected) . Then I have put back the original battery to broken device, same overheating issue.
Now I think it's hardware issue, or do you have any ideas? Why another battery don't works?
Thanks