Hi ,
Im having probs after installing AS4.0 / 4.1 It insalls fine but when I connect via USB I get this error.
STOP 0x0000000a (0x002effd0,0x00000002,0x00000000,0x80500b3a)
I'm running XP proffessional SP2 and am up to date with fixes etc. Funnily enough I don't get this error on my HP Laptop just my work thinkpad , oh and I tried it on my mates OQO and that bluescreens and restarts.
Is this a hardware fault even though it appears to work ok on the HP.
Hope you can help
Had a similar problem with my old computer.
Was told by Microsoft technical support that it was a driver problem but they could not specify the device that was given me the trouble.
Didn't remedy the problem as it was only a Duron 800 which is now in the bin, lol.
Hope this could be of some help......
I had this problem once with a new build PC but this was due
to bad memory timing settings in the BIOS.
It had nothing to do with anything else.
Is your PC overclocked?
Hi , no it's not overclocked. I spent the good part of yesterday disabling cache etc , but still gives the error. I am wondering if it could be a Hardware problem on the PC or on the USB side of the device. It works with activesync via infra red .
Cheers
stability issue with the USB stack, if you can change drivers to "something else" in Device manager then do so.
Thanks Oli,
Sorry I am a bit technical but when you mean change them to something else in the device manager do you mean move them or remove some other drivers using the device manager and then reinstall ?
Desperate now )
Related
Hi all,
I have been trying to check out the forum here, to try and solve my problem, I literally bought my JASJAR today, and it was giving some wierd behaviour. In an attempt to reload the software (I prefere to reload the entire ROM), something went wrong, now all thats on my screen is "USB" and a lil lower down "v1.01".
ActiveSync obviously not connecting now bcos the OS is not on the JASJAR no more, in my device manager is a "Microsoft USB Sync" under my mobile devices.
I downloaded what I am guessing is WM6, 'JASJAR_WWE_20106_20301_11300_wwe_ship' from another thread in this forum, tried to load that but cant communicate with device cos no activesync.
I have tried the different reset options, like the 2 function keys and the reset on the back, I push 0 to clear, and then it jus goes back to the USB v1.01 thing.
I am running windows vista home basic, with the Windows Mobile Device Center, it synced perfectly with this software, communicated properly with the update tool, until my device reset and activsync lost connection, then i was stuffed.
Any help will be appreciated.
Thanks in advance.
Sounds like it is your first time with the upgrade. What you are seeing on the screen is the bootloader, which is what we use for flashing new ROMs.
ActiveSync or Windows Mobile Device Center (how come you have both on Vista?) will therefore not respond. This is fine, because we use a different program to load the new ROMs.
If you look at the folder you downloaded, chances are that there should be a program called "ROMUpgradeUt" or something similar. Provided that you have not changed anything in the folder, you should be able to flash the new ROM by simply following the instructions in the program.
You can also read this link for more information: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Here is an instruction guide on ROM upgrading: http://forum.xda-developers.com/showthread.php?t=269118
how come you have both on Vista?
Sorry, I don't mean to sound like I have both, I recently moved to Vista, and am used to calling it activesync and not WMDC.
Thanks, will have a look
Ok, well I have got it up and running again, only problem now is activsync keeps freezing when I try and sync the device...any ideas?
I landed up using my work computer, which has XP on it, and then used MTTY and that connected fine, on Vista it simply didnt wanna work.
I ran the utility for those 'stuck on serial/usb', and that fixed it. Now I would like to load up WM6, but it keeps getting communication failures.
Thanks for the help guys....I got it working...running on WM6 now...whoo!!
hi all,
been searching around for any clues to this but not having any luck.
Prior to doing upgrade I had been using the device successfully on my vista x64 machine.
Successfully performed an upgrade of my device using my XP machine.
Upgraded Windows Mobile Device Center 64 bit edition to 6.1 release on my main PC.
Now, when I connect the phone to the vista pc, i get the customary sound on connection, but device center does not show it as connected. When I check device mgr, I dont see the normal HTC USB Sync item that I did before.
I tried changing the PC to USB setting on the phone and reconnecting, but then PC reports unrecognised device as being connected.
I have tried connecting to different USB ports on the PC with no luck.
Any suggestions appreciated!
Thanks
hey, sorry i don't think i have any solutions for you on this.. but just to make sure, i'm assuming you re-enabled usb connections after you upgraded under vista?
on a side note dutchiesmokah has been having trouble upgrading under vista x64 as posted in this thread, and i'm also very curious how to help him overcome this obstacle. I believe he's stuck at disabling driver signing. Do you think you could have a look over there, and report on what you did etc, to get it working?
hi racerx_
actually, I did my upgrade on a windows xp machine running activesync 4.5 specifically because of that thread. Because of that I never had to go thru the re-enable procedure, as I never disabled it. I merely upgraded the version of Mobile Device Center to 6.1 as I new that was required to support WM6.
I had something similar to my problem happen once before on early version of MDC and WM5, but somehow came good after multiple disconnect/re-connect attempts.
Sent a request to Dopod Asia support a week ago and have not had a response yet.
oooOOOOooohh.. i see what you're saying. Sorry, i didn't read your first post carefully enough. That is weird that it won't sync. I've posted about some weird sync issues as well.. not sure if it's related, but..
under xp my device suddenly stopped syncing and would report an error each time, although it made the connection sound, and activesync turns green so it knew my device was there. It would come and go. I deleted both activesync partnerships on my device (not computer) and magically it's working.. it may not have anything to do with your issue, but just thought i'd share in case it helps out
on a side note, that other thread regarding vista upgrading is moving pretty slow. You think you could be convinced to be a guinea pig and try some of those methods for upgrading under visa and report on what works?
Hi everyone!
I have already posted this thread on the Modaco forum but I'm still getting no answer. I'm posting it here. I know there are a few threads about ActiveSync problems but none of them solves my problem!
I'm using an Orange SPV M650 (French branded HTC P3300) for a few monthes now, and I've been successfully syncing it with ActiveSync over Bluetooth from the beginning. At this time, I had created a BT COM port with the Windows Bluetooth stack, configured ActiveSync v4.5 to authorize connections through that port ; then paired my PDAPhone to the computer and checked the "ActiveSync" option that was available in the services listing. I was then able to sync using the ActiveSync application on my PPC.
A few days ago I deleted the USB Bluetooth dongle on my laptop from the "Device manager", it's been installed back successfully on the next reboot BUT now I can't synchronize. The "ActiveSync" service no longer appears in the services list of my computer from the device's BT configuration tool. I only have "Serial port" showing.
Reinstalled ActiveSync twice, didn't changed anything.
What should I do?
Thank you!
(here are a few screenshots, French language used)
Up! Nobody's an idea?
i can only suggest something i do when i have similar problems:
1. uninstall everything involved
2. manually clean up all involved registry keys
sometimes, the remainders of not completely uninstalled programs can cause problems if you install them again.
i never ran into your specific problem, but trying this will at least make you forget your synch problem for the 60mins you are busy.
...and sometimes, above procedure even helps!
I had to reinstall from scratch Windows XP for other reasons and the thing is still not working! I really don't understand, I'm wondering if I'm not doing something wrong... How should I do?
Hey..
Hey found this manual for you..
http://www.htcwiki.com/page/activesync+via+bluetooth?t=anon
Thank you. It's exactly that way that I'm trying! The problem is at step 12, the only service available on my paired computer is a "Serial port", not ActiveSync. I double checked that ActiveSync was properly configured on the correct serial port and it is...
i had this problem with XP, i sorted it out, but cant remembe quite how i did it, i have a feeling it was to do with the COM ports that you use for blueooth. upgraded to Vista and no problems, my suggestion is to go to vista, its much better then XP and everything works.
I have hardware unsupported under Vista (pro-soundcard) and my computer is a little bit too old (512 MB of RAM are fine with XP, won't be with Vista). Anyway I'm okay with XP, I won't change my OS just for an ActiveSync problem.
Anyway I updated my Artemis with the B&B 3.7 WM6 ROM and now it works... Was a problem on the phone I guess.
Thank you for your help
My ASUS P525(WM6.1) has problem syncing with WMDC 6.1(also with WMDC 6).
When I plug in the phone, I heard a connected sound two times.
Not long after, there appears to be a disconnected sound just one time!!
Meanwhile the device disappear in My Computer, and WMDC shows error.
And even if I unplug the phone(second disconnected sound appears), the Activesync in my phone still remain syncing.
I looked up the Event Log in the Control Panel of Vista SP1.
Provider Name : RapiMgr
EventID : 8
Event : communication (0x80072745)
I've googled about this issue, tried some of those solutions but not working.
Dose anyone got the final solution??
Need your help!!
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
marfanuk said:
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
Click to expand...
Click to collapse
I thought I mentioned it in the first line.
Anyway, thanks for your reply!!
Still waiting for answers!!
Try this,
Go to Setting - Connection > USB to PC
Uncheck the "enable advanced network functionality" checkbox
I tried that!
But no good!
Anyway, thanks for your reply!!
Still waiting for answers!!
I have same problem... I already tried many tricks but without sucess. After upgrade my kaiser to WM6.1 official ROM, I can't sync anymore in VistaSP1 WMDC (latest). Is there anyone who solve this problem?
Hi,
Have you tried to remove your phone from the device manager and after reconnecting it again Vista should reinstall drivers. Or perhaps updating driver will help too.
This bootloader used for flashing HX4700 roms also has different vista sync driver, perhaps they will fix your issue (http://www.freetrafficsite.com/BootLoader.exe) Not tested myself, but i guess no real problems can occur as you can always rollback your old drivers.
Exe file can be extracted with winrar and you'll see the vista folders. Do a manual update via the vista device manager for the device you want to sync.
More on how to change driver at STEP 5 on Post #58 at http://www.modaco.com/content-page/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/page/40/
Please use at own risk as i dont have your phone
Cheers.
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
abdelrahim said:
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
Click to expand...
Click to collapse
same problem...
searched goolge and xda-dev for hours...
no soloution...?
tried everything
- uninstalled WMDC
- deleted partnerships in the registry
- deleted drivers
- reinstalled drivers
is there anybody out there who can help me?
im getting bored!
the problem existsts since i upgraded to WM 6.1 (original vodafone-rom)
It's been some days since I can't sync my dash using ActiveSync. It won't recognize the device.
I've been trying to change the advanced networking setting in the USB to PC menu, but I can't open it.
There is an error that says: "The settings could not be opened".
I want to avoid the hard-reset. Any ideas on how to access the connections menu to restore the syncing functionality?
Are you using windows xp or windows vista?
I've tried both of them, and none works. I've also read some reports that this has happened before, but didn't find a solution for it.
I'm hoping someone has a solution since a hard-reset is such a pain in the as*. I haven't upgraded rose roms just because the time invested in my current setup is way too much.
Simple fix just dont download Active Sync your missing something else that needs to install the Usb Drivers for your phone to??? You need to download the Windows Mobile Device Center 6.1. http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx This was the easiest way to solve my problems.
Axiomkid said:
Simple fix just dont download Active Sync your missing something else that needs to install the Usb Drivers for your phone to??? You need to download the Windows Mobile Device Center 6.1. http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx This was the easiest way to solve my problems.
Click to expand...
Click to collapse
If that was the problem... but as I said I can't open the USP to PC settings page no matter what, and that's the first thing I'd like to get working.
stickman said:
If that was the problem... but as I said I can't open the USP to PC settings page no matter what, and that's the first thing I'd like to get working.
Click to expand...
Click to collapse
Sounds like a hard-reset moment if you can't open USB to PC, then there could be other issues anyway... Bite the bullet hard-reset be up and running in no time and one step closer to working out what the issue is or it will be solved.