speaker phone xda 2s wm2005 - MDA III, XDA III, PDA2k, 9090 General

when I'm in a call and put on speaker phone it doesn't work ut just stays regular, anyway to fix or anyone have the same problem as me ? I have xda2s with winmob 2005 latest..

i have xda 2s running wm5.0, and speakerphone works perfect, are you holding the call button for long enough?? :?

Yes, I hold it down and it says "Speak phone is on" but then I cant hear anything unless I still put it up to my ear like a regular phone

I fixed it, nevermind guys =)

How to Update to WM5?
Hi, Can your both teach me how to upgrade
my XDA2s to New WM5 phone ROM?
Pls.... and thank you ....
Or pls send to me the the Install programe for me
My Gmail is [email protected].

imablackhat said:
I fixed it, nevermind guys =)
Click to expand...
Click to collapse
Good if you could tell everyone how you've fixed it though

Related

phone problem

Hi,
I'm from Belgium and together with some friends we bought 3 QTEK 9090 .
They all seem to have te same problem ...
Occasionally, when answering the phone ,no sound is transmitted.
I can't hear the caller and the caller can't hear me.
Does anyone has the same problem ?
Is there a solution for this annoying problem.
We already tried with other simcards from other providers but that didn't help.
Rom version is 1.22 WWE
Thank 's for any suggestions
Greetz
Pesadilla
This problem is widely known, and no fix has been successful. You must reset your phone when this happens. Apparently, turning on and off bluetooth fixes it as well.
Even the 1.40 Rom still has this issue.
Thank you for your reply.
What I don't understand is that if the problem is known, why isn't there a solution coming from QTEK ?
They must be aware of this problem also.
Greetz
Pesadilla
TheLastOne said:
This problem is widely known, and no fix has been successful. You must reset your phone when this happens. Apparently, turning on and off bluetooth fixes it as well.
Even the 1.40 Rom still has this issue.
Click to expand...
Click to collapse
Hmmm, since I installed Radio ROM 1.10 I no longer have this problem (even with 1.40 ROM).
As soon as I have some time , I will try it out .
Thanks for your advice !
Greetz
Pesadilla
HappyGoat said:
TheLastOne said:
This problem is widely known, and no fix has been successful. You must reset your phone when this happens. Apparently, turning on and off bluetooth fixes it as well.
Even the 1.40 Rom still has this issue.
Click to expand...
Click to collapse
Hmmm, since I installed Radio ROM 1.10 I no longer have this problem (even with 1.40 ROM).
Click to expand...
Click to collapse
Um... i don't think that's vaild. I had the no sound problem with all my roms.. then... I installed 1.40... VOLA.. the phone functions again.. no "no sound" problem.... I was a happy camper for 2 weeks.... then... then.... then... 2 weeks later.. the problem came back... it came back and now it happens 2 twice a day.. just like before.
I strongy believe that is has somthing to do with the Bluetooth and the handfree profile .. cos.. when the no sound thing happens.. when u try to move the volume key up or down... there is minor sound coming from the phone speaker. Then.. when your phone is normal operation.. try using your Bluetooth handfree.. make a call... when the bluetooth headset is working normally, try picking up your phone and try to move the volume key.. the same patterns of sound comes from the phone's speaker...
Just my 2 cent..
My conclusion is that even if your Bluetooth isn't on, when a phone calls come in, the phone automaticy switch to the bluetooth headset profile and disable the speaker and mic on the unit.

All phone calls create a missed call

After upgrading to 1.40 Daangaard ROM on my Brightpoint Qtek 9090 I get a missed call when answering. Does anybody else see this, and can it be fixed?
Mastiff said:
After upgrading to 1.40 Daangaard ROM on my Brightpoint Qtek 9090 I get a missed call when answering. Does anybody else see this, and can it be fixed?
Click to expand...
Click to collapse
i dunno if its the same but on my xda 2s, sometimes when i get a call, and i press the answer button, it hangs up ands give me a message saying "unable to answer call" and goes beeep beep beep...... very strange.
Mastiff said:
After upgrading to 1.40 Daangaard ROM on my Brightpoint Qtek 9090 I get a missed call when answering. Does anybody else see this, and can it be fixed?
Click to expand...
Click to collapse
i dunno if its the same but on my xda 2s, sometimes when i get a call, and i press the answer button, it hangs up ands give me a message saying "unable to answer call" and goes beeep beep beep...... very strange.
joey jojo said:
Mastiff said:
After upgrading to 1.40 Daangaard ROM on my Brightpoint Qtek 9090 I get a missed call when answering. Does anybody else see this, and can it be fixed?
Click to expand...
Click to collapse
i dunno if its the same but on my xda 2s, sometimes when i get a call, and i press the answer button, it hangs up ands give me a message saying "unable to answer call" and goes beeep beep beep...... very strange.
Click to expand...
Click to collapse
This must be a "special" from HTC, since this issue has been known for years with their smartphones. They might be good at buliding computers, but they're terrible in phone' functions.

Phone dial, ending call, etc.. problems.. Am I the only one?

Hi forum!
Before anything, thanks for your invaluable help and support, without it I would feel even more lonly on my PPC life
OK, said so...
I'm having currently some problems with the phone part of this great device. Sometimes when I answer a call (with the hardware key) it takes 2 to 3 seconds before I can hear anything from the person calling me. The same happens when I hang. It takes time to hang the conversation, so I never know if it's really hanged..
Lately I'm having also problems with the "today" app I think. It never shows up and the upper bar (status?) does not change when I receive a call.
I went trhu a hard resseting and restore (Sprite) process 1 week ago, but I had the phone problems before that...
Thanks a lot for your help.
by the sound of it, you have upgraded to the wm5.0 rom, i have these problems also, until there is a known fix for the minor bugs, with the today screen you can just go into settings and today, then come out again, and what wasnt there before should be there now, also , have you tried to upgrade the radio rom too??? 8)
thanks for your answer! But I'm currently using wm2003. Though I'm considering switching to wm5 now we can if I don't get a solution to this
I normally use the phone for work-job and this minor things annoys me big deal!
joey jojo said:
by the sound of it, you have upgraded to the wm5.0 rom, i have these problems also, until there is a known fix for the minor bugs, with the today screen you can just go into settings and today, then come out again, and what wasnt there before should be there now, also , have you tried to upgrade the radio rom too??? 8)
Click to expand...
Click to collapse
heelp
PLease, someone help!

Skype!!!!!!!!!!!! Help!!!!!!!!!!!!!!!

I am using Dopod C720W. I updated ROM to Kavana 18. It 's impossible to install Skype in my device. Please help me.
Thanks in advance.
why wouldnt it install? it should install effortlessly and just log ib with your skype id and go, i use skype on my dash just fine
Additional useless question...
"My Dash doesn't work anymore!!! Please heeeelp!!!!"
ok so whats wrong with it?
hard reset the phone
hold 2 soft keys for ten seconds at the same time and then press power button while still holding soft keys, follow on screen directions after that
blahzay_blah said:
why wouldnt it install? it should install effortlessly and just log ib with your skype id and go, i use skype on my dash just fine
Click to expand...
Click to collapse
about that, when i use skype it seems the other person can't hear me... is there anything i should do for it?
did u hit the mute button or anything?
blahzay_blah said:
did u hit the mute button or anything?
Click to expand...
Click to collapse
nope. in fact, when i place that "test" call (the one your voice is recorded and then you're supposed to hear it) i can't hear anything..
I've tried Fring, Skype's own program, and then finally, Iskoot .
I found that because iskoot for skype actually connects you using your telephone's minutes that it was alot more reliable and better voice quality than a data connection.
I don't think there would be much success with Skype's program over an Edge connection. It 'might' be ok over the WIFI though, except it would probably drain your battery.
Anyone else? Do you consider Skype or Fring's VOIP useable or more of a novelty feature?
I'll probably revisit these again though once I have a 3G phone, and battery life's not as much of an issue.

Touch Pro 2 Call volume

Hi.
I am having a problem with calls on my gsm TP2. It started about an hour ago when I call someone they cant here me but i can here them fine. I think its the mike but idk. I havent dropped it recently so could it be software or is there a tweak to make the mic more sensitive. I am open to suggestions. Thanks in advance.
cfcoleman said:
Hi.
I am having a problem with calls on my gsm TP2. It started about an hour ago when I call someone they cant here me but i can here them fine. I think its the mike but idk. I havent dropped it recently so could it be software or is there a tweak to make the mic more sensitive. I am open to suggestions. Thanks in advance.
Click to expand...
Click to collapse
If by any chance you used Hd tweaks or instaled a audiopara3 file to make volume higher it will happen that. Just restore to origimal settings on hd tweak or uninstall the audiopara3 file that you installed.
Hope it helps
I dont have any of those installed. I hard reset my phone. Put two new radios on. Flashed the original wwe wm6.5 rom and its still the same. If i slide open the phone or hit the phone u can hear that through the other line but its not picking up my voice.
Ok. Now i have to yell into the phone for the person to hear me. Does anyone know the registry hack to increase mic sensitivity?????

Categories

Resources