Hi.
I am having a problem with calls on my gsm TP2. It started about an hour ago when I call someone they cant here me but i can here them fine. I think its the mike but idk. I havent dropped it recently so could it be software or is there a tweak to make the mic more sensitive. I am open to suggestions. Thanks in advance.
cfcoleman said:
Hi.
I am having a problem with calls on my gsm TP2. It started about an hour ago when I call someone they cant here me but i can here them fine. I think its the mike but idk. I havent dropped it recently so could it be software or is there a tweak to make the mic more sensitive. I am open to suggestions. Thanks in advance.
Click to expand...
Click to collapse
If by any chance you used Hd tweaks or instaled a audiopara3 file to make volume higher it will happen that. Just restore to origimal settings on hd tweak or uninstall the audiopara3 file that you installed.
Hope it helps
I dont have any of those installed. I hard reset my phone. Put two new radios on. Flashed the original wwe wm6.5 rom and its still the same. If i slide open the phone or hit the phone u can hear that through the other line but its not picking up my voice.
Ok. Now i have to yell into the phone for the person to hear me. Does anyone know the registry hack to increase mic sensitivity?????
Related
Hi,
I have recently upgraded to WM 6.1 and tested various ROMs.
One problem I came across is that on a phone conversation my voice can hardly be heard on the other side
Did anyone encounter this? Any idea what it may be?
Turn off WOW EFFECTS in setting...
I don't think I ever turned WOW EFFECTS on (at least not intentionally).
Where would I find this setting?
as I told you, in settings...
the personal tab.
i also have that problem. been plaguing me for a long long time.
Try a few diff types of roms but make sure they have
1. Start up animation disabled
2. SetAcousticparam in their config file
these 2 are absolutely essential, else your phone voice would be low.
though mine is more or less confirmed to be a hardware problem. if you flash the official HTC asia rom and still get this problem. yeah your case is like mine i guess. other then that, if you find out something else, do lemme know
Sylpheed said:
i also have that problem. been plaguing me for a long long time.
Try a few diff types of roms but make sure they have
1. Start up animation disabled
2. SetAcousticparam in their config file
these 2 are absolutely essential, else your phone voice would be low.
though mine is more or less confirmed to be a hardware problem. if you flash the official HTC asia rom and still get this problem. yeah your case is like mine i guess. other then that, if you find out something else, do lemme know
Click to expand...
Click to collapse
1) done already
2) where is it?
ringtone volume is very low in 6.1 (19209).
well, with PDAViet Rom I don't have WOW EFFECTS in my personal settings. However, I did find in the Artemis forum a small cab to deactivate the WOW Effects.
Since I installed it the problem is gone!
unfortunately that doesn't work for me. i've tried mine with freshly installed cab files, even those from official HTC, with no WOW effects activated. still doesn't work.
Worst still it's a random problem. soemtimes it works, sometimes it dosen't... oh well..
do you have a2dp headset? I have PDAVIET ROM and bluetooth a2dp headset and every time i finish listening to music, turn off bluetooth i have no sound on my device. No alarms, reminders, ringtone, sms notyfications etc. Had this isue in Faria ROM too.
hi there!
im using a hero with mc 2.3 and FU_6.35.07.08 radiofirmware.
everytime I'm talking to someone, he keeps telling me to speak louder.
no matter how good the signal strenth is or to whom i speak!
I've already tried several radios, just in hope to be able to handle it.
the only solution is to hold the microphone straight to my mouth (its on the downside)
but thats still not the all in all solution..
is there anything like a microphone boost?
or at least can anybody tell me its just a bug or something?
i just hope its not due to the construction.
did u used the Volume Boost app from the market ?(forgot the name....removed asap...)
I used this is had that problem...
and backup didn't help..
ended up had to wipe and re-flash...
dammit... yes.. i did..
thank you for your help!
ill try it out.
Happened to me to.
What did you have to reflash to fix this ?
I will try to get a modified csv file for all hero roms to increase volume on headset, speaker, and for incall volume!
Drizzy Drake Rogers said:
I will try to get a modified csv file for all hero roms to increase volume on headset, speaker, and for incall volume!
Click to expand...
Click to collapse
Thanks Drizzy!
This will be much appreciated!!
When I hold my Hero in my left hand up to the ear my little finger (pinky) always cover the little microphone hole so the sound can't reach the microphone. Those who I speak with tells me to speak louder because of this.
Otherwise I get good reports of the clarity of how I sound
Actually, after the latest official ROM upgrade, people have been telling me to speak up, that they can't hear me properly or that it sounds like I have a sweater over the mic or that I'm in a tin can.
I was about to send it in, perhaps I've dropped it or something. But it apparently not just me who has this problem,
Yeh Im also having the same problem. I have the MC 2.3 ROM but did use the volume hack program also. Do you think this has something to do with it?? Does anyone know of any way to increase the volume of the phone without screwing up the microphone?
hi guys, im having this problem too but only since like yesterday i think! im sure its something to do with the modaco rom as if i go back to default everything seems fine.
Any ideas?
Confused
Hi,
Sorry about the maybe obvious quiestions but I am quite new to this!
I bought an apparently new unlocked HTC Hero from eBay recently (which I now realise might have been a big mistake!)
On "About Phone" section of the phone it says I have firmware version 1.5 and "Build Number": "MoDaCo Custom Rom 2.3 Core".
I am now realising that this phone is probably not as new as advertised and has not come with the original software.
Anyway everything else seems to work perfectly with this phone apart from the same microphone problems as other people have described, so I was hoping that someone could explain to me what has been done to the phone and any suggestions on how to fix it or return it to its default state!
Im sorry, for the simple questions but as I say I am new to Android and would like a phone that I can make phonecalls with!
Thanks for any help you can give me.
Solution
I think it can be solved by replacing the following files with the original ones:
/etc/AudioFilter.csv
/etc/AudioPara4.csv
/etc/AudioPreProcess.csv
Of course you have to be root to be able to replace these files...
Note: I have not tried the above yet, but these files contain low level audio settings, so there is a good chance changing it can help you.
Thanks for the response.
However being completely new to this I am still a bit unclear.
How do I access these files on my phone and where do I find the original ones?
I am pretty sure it has been rooted - although not sure how I check - it definately has a custom rom installed on it though
You can download for example the MoDaCo ROM: http://content.modaco.net/hero/2.3-update-hero-modacocustomrom-core-signed.zip
In this .zip file you will find the mentioned files in the /system/etc/ sub-directory.
Simply copy them to your MicroSDHC card, than in the phone use a file browser (like this: http://forum.xda-developers.com/showthread.php?t=530271 ) to copy them from the card to the phone's file system (into /etc/ ). After this you only need to reboot.
aaaah, i have this exact same problem!! I really hope it is the ROM & not the handset.
Hello,
I have been using Touch Pro 2 from last 7 months. Around 4 moths back i upgraded to Win 6.5. After that i am facing a particular problem. Sometimes i get an error of "Device.exe" and then all the sound from the phone is mute.It doesnt play any sound and even if i answer/make a call, i cannot hear the other party's sound or even when their phone is ringing. There is only vibration. I tried using it with headset, and there is absolutely no sound. After resarting the phone everything is fine. But the error appears the very next day or the day after that, and i just restart the phone. I tried Hard Reset and installing the official ROM from HTC website, still the problem persists. The only software i installed after replacing the ROM were NetCF3.5 & Advanced Configuration Tool v3.3 only. I highly doubt if it causes this problem as i was using it in Win6.1 when i bought the device.
The people at HTC downgraded my device to Win 6.1 and asked me to use it for a week and see if the error comes. I am using it for almost week, and the problem is not there.
Can someone suggest what the problem could be, as i dont like 6.1 as i am now used to 6.5. I dont think HTC will be able to help me soon. Someone please help me in this case.
REGARDS.
Hi, I had a similiar issue with my tilt 2 that I finally figured out was linked to advanced config tools. Specifically the changes I made in the sounds settings. For some reason this muted my microphone and speaker. After changing back those settings to default the problem was resolved. I am running 6.5 on my phone. Hopefully this helps you out.
ehaas13 said:
Hi, I had a similiar issue with my tilt 2 that I finally figured out was linked to advanced config tools. Specifically the changes I made in the sounds settings. For some reason this muted my microphone and speaker. After changing back those settings to default the problem was resolved. I am running 6.5 on my phone. Hopefully this helps you out.
Click to expand...
Click to collapse
YOU ARE RIGHT buddy... i was doubting on Advanced Config only..... but i did not made any changes to he sound, i use it for unthreaded messages only...but this time i did not install it, i got the unthreaded sms patch from HTC and installed it, and till now i did not face the same problem, it almost 3 complete days of my usage.....
now i am sure Advnced config is the culprit....
Few more people are having the same problem in my country(UAE) and have complained at HTC, i shall inform them about this...or lets wait for another 3 days to make sure that this problem does not occour.
THANKS A LOT
I had some similar problems with the advanced config running the stock rom with the att tilt2. I've since banished that program from my phone.
Hi, i just installed FRX07.1 on my HTC TP2 RHOD100 this morning. The problem is i found out there is no sound or ring. I can make calls but the receiver can't hear me or when others calling me, the phone is not ringing, just vibrate. I check the volume is up and everything is on. Let me put it simple, there are no sound at all in this phone. Please help!!
I already installed more than 5 times and still the same.
Appears the thread is solved.
Edit - OP PM'd me and said it comes back...?
I'm not sure what could be wrong. Are you on a .27 kernel, from the autobuild? FRX07.1, no other system changes...? Just apps installed?
I guess some app could be triggering it to, I don't know... Does it happen on a fresh data.img?
this works for me
just call your voicemal then run haret while your phone is still on the phone call.
jaxs818 said:
just call your voicemal then run haret while your phone is still on the phone call.
Click to expand...
Click to collapse
Wow. That's a REALLY old fix for a mic bug that used to be pretty rampant... I thought these were all long since resolved...
If you guys have a boot with absolutely no audio, grab logs from GetLogs. I don't know how much it'll help, since FroYo and the out audio stuff is going away... You folks might want to also try out the new GB build that's still in testing - it's got a new method of routing audio that should work better for everyone. It is the future, so make sure it works well for you!
hi to all,
i search everywhere and i flashed the phone around 15 times, just to see if its a rom problem.
i try all the cloudy'S stock rom but still the same.
so when i receive or i make a CALL i hear very well but the other person can't hear me,
to make it working i must activate the speaker option to communicate with the other person.
But as many people write here when we activate the speaker the second mic is activated but the lower mic is also in
good reception so maybe i must change something, somewhere???
please help me,thanks to all
Mine too... used to only be first call second would work... although now it is almost every call for me.
BTW, I have never had problems with bluetooth calls!
Although bluetooth works, it does not seem to be a hardware mic issue (like a dirty mic as some suggest), seems to be a codec bug. I'm pretty sure of it because I have call recording on my phone and my recorded voice (that no one can hear on my first call) is distorted like it is down converting my voice to only 4-12kbps.
I hope the ZVE update with HD voice will place a new codec in the phone dumping the buggy one.
Deciding to update to latest ZVE version to give it a try.... will try and let you know if it worked.
I've actually started having this problem as well, but I have never touched the software on the phone. Bone stock. I wonder if there is some systemic hardware issue with the mic.
Sent from my LG-LS980 using XDA Free mobile app
Fyi I factory reset my phone and it seems to have fixed the mic. Heavy price to pay for a non-rooted phone but at least my phone works as a phone again.
Sent from my LG-LS980 using XDA Free mobile app
Phone, menu, call settings, Enhanced voice, unchecked.
I feel the noise cancelation is too aggressive.
problems
lattisimo said:
Phone, menu, call settings, Enhanced voice, unchecked.
I feel the noise cancelation is too aggressive.
Click to expand...
Click to collapse
Hi my friends, i have this problem too, i purchased it and tryed all, soft and hardware, i get change the flex complete and nothing, i really apreciatte if someone solved the problem and help me do it too.
Nicodmus0024 said:
Hi my friends, i have this problem too, i purchased it and tryed all, soft and hardware, i get change the flex complete and nothing, i really apreciatte if someone solved the problem and help me do it too.
Click to expand...
Click to collapse
Can you post a screen shot of your Call Settings screen?
Phone, menu key, call settings.
lattisimo said:
Can you post a screen shot of your Call Settings screen?
Phone, menu key, call settings.
Click to expand...
Click to collapse
Here it is, sorry for the time to post.
Nicodmus0024 said:
Here it is, sorry for the time to post.
Click to expand...
Click to collapse
What build are you running?
lattisimo said:
What build are you running?
Click to expand...
Click to collapse
Here is a sreen shot of all info about soft
lattisimo said:
What build are you running?
Click to expand...
Click to collapse
Nothing yet my friend?
Your software appears different than mine. Is yours stock? If not, would you be willing to TOT back to stock to test if the issue remains?