Develop Bugs

speaker phone xda 2s wm2005

when I'm in a call and put on speaker phone it doesn't work ut just stays regular, anyway to fix or anyone have the same problem as me ? I have xda2s with winmob 2005 latest..

i have xda 2s running wm5.0, and speakerphone works perfect, are you holding the call button for long enough?? :?

Yes, I hold it down and it says "Speak phone is on" but then I cant hear anything unless I still put it up to my ear like a regular phone

I fixed it, nevermind guys =)

How to Update to WM5?
Hi, Can your both teach me how to upgrade
my XDA2s to New WM5 phone ROM?
Pls.... and thank you ....
Or pls send to me the the Install programe for me
My Gmail is [email protected].

imablackhat said:
I fixed it, nevermind guys =)
Click to expand...
Click to collapse
Good if you could tell everyone how you've fixed it though

Phone dial, ending call, etc.. problems.. Am I the only one?

Hi forum!
Before anything, thanks for your invaluable help and support, without it I would feel even more lonly on my PPC life
OK, said so...
I'm having currently some problems with the phone part of this great device. Sometimes when I answer a call (with the hardware key) it takes 2 to 3 seconds before I can hear anything from the person calling me. The same happens when I hang. It takes time to hang the conversation, so I never know if it's really hanged..
Lately I'm having also problems with the "today" app I think. It never shows up and the upper bar (status?) does not change when I receive a call.
I went trhu a hard resseting and restore (Sprite) process 1 week ago, but I had the phone problems before that...
Thanks a lot for your help.

by the sound of it, you have upgraded to the wm5.0 rom, i have these problems also, until there is a known fix for the minor bugs, with the today screen you can just go into settings and today, then come out again, and what wasnt there before should be there now, also , have you tried to upgrade the radio rom too??? 8)

thanks for your answer! But I'm currently using wm2003. Though I'm considering switching to wm5 now we can if I don't get a solution to this
I normally use the phone for work-job and this minor things annoys me big deal!
joey jojo said:
by the sound of it, you have upgraded to the wm5.0 rom, i have these problems also, until there is a known fix for the minor bugs, with the today screen you can just go into settings and today, then come out again, and what wasnt there before should be there now, also , have you tried to upgrade the radio rom too??? 8)
Click to expand...
Click to collapse

heelp
PLease, someone help!

Light Goes off when typing Fast (I think)

Hi ,
I noticed this on all the WM6 Roms ( never even used the real WM5 ATT ROM)
But when you open the qwerty keyboard and start typing fast the light goes off and then when you press any botton it goes back on. I`m just wondering if its my unit or is it just ROMs flaw ? I didnt see anyone talking about this so I`m starting to think its my unit. Thanks in advance.

Mine's done that. It usually goes off when the phone tries to do something else, like checking or downloading email.
Also, turn off the word suggestion feature, that just caused problems such as missed letters, and I think it added to the light turn off problem as well.

harlenm said:
Mine's done that. It usually goes off when the phone tries to do something else, like checking or downloading email.
Also, turn off the word suggestion feature, that just caused problems such as missed letters, and I think it added to the light turn off problem as well.
Click to expand...
Click to collapse
yeah I always turn that off. didn't notice that it happenes durring something. thanks for the reply

yozh said:
Hi ,
I noticed this on all the WM6 Roms ( never even used the real WM5 ATT ROM)
But when you open the qwerty keyboard and start typing fast the light goes off and then when you press any botton it goes back on. I`m just wondering if its my unit or is it just ROMs flaw ? I didnt see anyone talking about this so I`m starting to think its my unit. Thanks in advance.
Click to expand...
Click to collapse
i don't think it particularly happens on wm6. it happened when i used jap wm5 by softbank, and it still happens with lvsw. thought it was more like a hardware issue.

qtotter said:
i don't think it particularly happens on wm6. it happened when i used jap wm5 by softbank, and it still happens with lvsw. thought it was more like a hardware issue.
Click to expand...
Click to collapse
ok thank god Im not alone

qtotter said:
i don't think it particularly happens on wm6. it happened when i used jap wm5 by softbank, and it still happens with lvsw. thought it was more like a hardware issue.
Click to expand...
Click to collapse
it used to happen to me on black pro 3.0

It's happened on all WM6 ROMs that I've tried (Custel, LVSW, JJ). There was a dicussion on this, and changing the word completion helped but did not completely resolve the issue.

BorisTheSpider said:
It's happened on all WM6 ROMs that I've tried (Custel, LVSW, JJ). There was a dicussion on this, and changing the word completion helped but did not completely resolve the issue.
Click to expand...
Click to collapse
I always had the it off, just "Enable Auto Correct" on and since day one and it does it, it does it less on the black IV, but still does it.

i780 NO Call waiting tone with HC4 ROM?

I completely flash the 3in1 HC4 ROM yesterday,
but i found that there is no call waiting tone for incoming call when i talking phone with other people.
Anyone have the same issue? or the setting in my phone was wrong ?
I am using the PCCW 3G network in Hong Kong and the operation setting in phone is used "XL"
Thanks

simdao said:
I completely flash the 3in1 HC4 ROM yesterday,
but i found that there is no call waiting tone for incoming call when i talking phone with other people.
Anyone have the same issue? or the setting in my phone was wrong ?
Click to expand...
Click to collapse
Just checked that - it's ok on mine, there is a repeating tone during the call for call waiting.
phone/pda rom i780DXHC4

I disable and re-enable the call waiting option, but it still no call waiting tone.

simdao said:
I disable and re-enable the call waiting option, but it still no call waiting tone.
Click to expand...
Click to collapse
Stupid question maybe, but you do see the incoming call on the screen right?
are you able to switch to it?
maybe it's a SIM or provider issue

Finally perform a hard reset to solve the problem

I used to have the same issue, missed couple of call....on c1...
I managed to figure out, the problem is the callwait.mid does exist but it was a silent midi....
Just fire up registry editor, go to HKEY_CURRENT_USER\ControlPanel\Sounds\CallWaiting
change the sound value from callwait.mid value to callwait.wav...
and you can add vibrate by modify the script to av0pw3r,...
btw, no soft reset required....

eranro said:
Stupid question maybe, but you do see the incoming call on the screen right?
are you able to switch to it?
maybe it's a SIM or provider issue
Click to expand...
Click to collapse
the callwaiting was enable and i can see the incoming call show on screen.
Finally
Thanks for "Crash74" i added vibration and change the tone

simdao said:
the callwaiting was enable and i can see the incoming call show on screen.
Finally
Thanks for "Crash74" i added vibration and change the tone
Click to expand...
Click to collapse
Ironically, I encountered the same problem just today.
Thank you "Crash74" for solving this for me
This is strange though,
I don't remember having this problem when I first installed this rom (HD1),
but indeed the callwait.mid is silent (as is the busy.mid).
Could it have changed on its own somehow?

crash74 said:
I used to have the same issue, missed couple of call....on c1...
I managed to figure out, the problem is the callwait.mid does exist but it was a silent midi....
Just fire up registry editor, go to HKEY_CURRENT_USER\ControlPanel\Sounds\CallWaiting
change the sound value from callwait.mid value to callwait.wav...
and you can add vibrate by modify the script to av0pw3r,...
btw, no soft reset required....
Click to expand...
Click to collapse
Thanks, Crash74. I can hear beep tone now. But, how to make the call waiting alert ring continuously like other phones? It beeps 4 times only.

i have the same problem too, and i checked and found that it is callwait.wav already....so, i think that may be i deleted it(i have no idea), can anyone send the file to me
[email protected]
and please tell me where should i put it.
another pt. is when i called htc centre and they told me that "ALL VERSION" of diamond will have his problem if you use BT, and if you want to solve it then you need to turn off BT and soft reset it. But this seems can't solve my problem

[Q] Call muted when there's another incoming call

After 30 minutes of going through posts in this forum trying to look for a solution, and apparently I couldn't find what I was looking for, I've decided to create this post.
Something really weird started happening to my arc recently. Whenever there's an incoming call (call waiting) while I'm talking on the phone, everything gets muted immediately. I cannot hear the other party, and vice versa. Even though I answer the call waiting call, we couldn't hear each other at all. I had to reject the call waiting call in order to be "connected" with the current call again. At first I thought it was some carrier, reception issues, but it's not. The bars were full and I've tried restarting the phone, but it didn't help. I was wondering if anyone has the same issue after upgrading to 2.3.3 and how did you fix this? I didn't notice anything like this before I upgraded. Any help is appreciated!

jerrytea said:
After 30 minutes of going through posts in this forum trying to look for a solution, and apparently I couldn't find what I was looking for, I've decided to create this post.
Something really weird started happening to my arc recently. Whenever there's an incoming call (call waiting) while I'm talking on the phone, everything gets muted immediately. I cannot hear the other party, and vice versa. Even though I answer the call waiting call, we couldn't hear each other at all. I had to reject the call waiting call in order to be "connected" with the current call again. At first I thought it was some carrier, reception issues, but it's not. The bars were full and I've tried restarting the phone, but it didn't help. I was wondering if anyone has the same issue after upgrading to 2.3.3 and how did you fix this? I didn't notice anything like this before I upgraded. Any help is appreciated!
Click to expand...
Click to collapse
I have the same problem. really annoying!

AmitPeri said:
I have the same problem. really annoying!
Click to expand...
Click to collapse
are we the only 2 that has this problem?!

Don't know if it helps but I just wanted to let you guys know I don't have the problem
( open bootloader, flashed prerooted global generic )

jerrytea said:
are we the only 2 that has this problem?!
Click to expand...
Click to collapse
Do you have the Viber app installed? I saw somewhere that some phones react like this because of Viber.

Sorry I don't seem to have noticed that either and I recieved a call waiting bleep while I was on a call just yesterday

I can confirm its the Viber app, I just uninstalled it and the problem is gone!

AmitPeri said:
I can confirm its the Viber app, I just uninstalled it and the problem is gone!
Click to expand...
Click to collapse
Yes, I can confirm this as well, but the problem is fixed on the latest version of Viber. Happy with regular call and Viber now. Thanks to everyone who tried to help